HCOO- Doping-Induced Multiexciton Emissions in Cs3Cu2I5 Crystals for Efficient X-Ray Scintillation.

Self-trapped exciton (STE) luminescence, typically associated with structural deformation of excited states, has attracted significant attention in metal halide materials recently. However, the mechanism of multiexciton STE emissions in certain metal halide crystals remains largely unexplored. This study investigates dual luminescence emissions in HCOO- doped Cs3Cu2I5 single crystals using transient and steady-state spectroscopy. The dual emissions are attributed to intrinsic STE luminescence originating from the host lattice and extrinsic STE luminescence induced by external dopants, respectively, each of which can be triggered independently at distinct energy levels. Theoretical calculations reveal that multiexciton emission originates from structural distortion of the host and dopant STEs within the 0D lattice in their respective excited states. By meticulously tuning the excitation wavelength and selectively exciting different STEs, the dynamic alteration of color change in Cs3Cu2I5:HCOO- crystals is demonstrated. Ultimately, owing to an extraordinarily high photoluminescence quantum yield (99.01%) and a diminished degree of self-absorption in Cs3Cu2I5:HCOO- crystals, they exhibit remarkable X-ray scintillation characteristics with light yield being improved by 5.4 times as compared to that of pristine Cs3Cu2I5 crystals, opening up exciting avenues for achieving low-dose X-ray detection and imaging.

Wafer-Scale Two-Dimensional Semiconductors for Deep UV Sensing.

2D semiconductors (2SEM) can transform many sectors, from information and communication technology to healthcare. To date, top-down approaches to their fabrication, such as exfoliation of bulk crystals by "scotch-tape," are widely used, but have limited prospects for precise engineering of functionalities and scalability. Here, a bottom-up technique based on epitaxy is used to demonstrate high-quality, wafer-scale 2SEM based on the wide band gap gallium selenide (GaSe) compound. GaSe layers of well-defined thickness are developed using a bespoke facility for the epitaxial growth and in situ studies of 2SEM. The dominant centrosymmetry and stacking of the individual van der Waals layers are verified by theory and experiment; their optical anisotropy and resonant absorption in the UV spectrum are exploited for photon sensing in the technological UV-C spectral range, offering a scalable route to deep-UV optoelectronics.

Association of insomnia symptoms and trajectories with the risk of functional disability: a prospective cohort study.

BACKGROUND: There is limited understanding regarding prospective associations of insomnia symptoms and trajectories with functional disability. We aimed to investigate the associations of insomnia symptoms and trajectories with functional disability. METHOD: A total of 13 197 participants were eligible from the Health and Retirement Study. Insomnia symptoms included non-restorative sleep, difficulty initiating sleep, early morning awakening, and difficulty maintaining sleep. We also identified four distinct trajectories of insomnia symptoms: low, decreasing, increasing, and high insomnia symptoms. Functional status was assessed through activities of daily living (ADL) and instrumental activities of daily living (IADL). RESULTS: Participants experiencing one (HR, 1.21; 95% CI, 1.13-1.29), two (HR, 1.43; 95% CI, 1.29-1.57), or three to four (HR, 1.41; 95% CI, 1.25-1.60) insomnia symptoms had a higher risk of ADL disability than asymptomatic respondents. Similarly, participants with one or more insomnia symptoms had a higher risk of IADL disability. Furthermore, using the trajectory with low insomnia symptoms as the reference, decreasing insomnia symptoms (HR, 1.22; 95% CI, 1.12-1.34), increasing insomnia symptoms (HR, 1.21; 95% CI, 1.05-1.41), and high insomnia symptoms (HR, 1.36; 95% CI, 1.18-1.56) were all associated with an increased risk of ADL disability. CONCLUSION: Both a single measurement and dynamic trajectory of insomnia symptoms are associated with the onset of ADL disability. Increased awareness and management of insomnia symptoms may contribute to the prevention of functional disability occurrence.

Wi-AM: Enabling Cross-Domain Gesture Recognition with Commodity Wi-Fi.

RF-based gesture recognition systems outperform computer vision-based systems in terms of user privacy. The integration of Wi-Fi sensing and deep learning has opened new application areas for intelligent multimedia technology. Although promising, existing systems have multiple limitations: (1) they only work well in a fixed domain; (2) when working in a new domain, they require the recollection of a large amount of data. These limitations either lead to a subpar cross-domain performance or require a huge amount of human effort, impeding their widespread adoption in practical scenarios. We propose Wi-AM, a privacy-preserving gesture recognition framework, to address the above limitations. Wi-AM can accurately recognize gestures in a new domain with only one sample. To remove irrelevant disturbances induced by interfering domain factors, we design a multi-domain adversarial scheme to reduce the differences in data distribution between different domains and extract the maximum amount of transferable features related to gestures. Moreover, to quickly adapt to an unseen domain with only a few samples, Wi-AM adopts a meta-learning framework to fine-tune the trained model into a new domain with a one-sample-per-gesture manner while achieving an accurate cross-domain performance. Extensive experiments in a real-world dataset demonstrate that Wi-AM can recognize gestures in an unseen domain with average accuracy of 82.13% and 86.76% for 1 and 3 data samples.

Association between oxidative stress and chronic orofacial pain and potential druggable targets: Evidence from a Mendelian randomization study.

BACKGROUND: Oxidative stress indicators affect chronic orofacial pain (COFP), but how to reduce these effects is uncertain. OBJECTIVES: 11 oxidative stress biomarkers were collected as exposures, while four forms of COFP were chosen as outcomes for Mendelian randomization (MR) study. METHODS: The effect estimates between oxidative stress and COFP were calculated using inverse variance-weighted MR (IVW-MR). Then, functional mapping and annotation (FUMA) was utilized in order to carry out SNP-based functional enrichment analyses. In addition, the IVW-MR method was applied to combine effect estimates when using genetic variants associated with oxidative stress biomarkers as an instrument for exploring potential druggable targets. RESULTS: The results indicated that oxidative stress biomarkers (causal OR of uric acid (UA), 0.998 for myofascial pain, 95% CI 0.996-1.000, p < .05; and OR of glutathione transferase (GST), 1.002 for dentoalveolar pain, 95% CI 1.000-1.003, p < .05) were significantly linked with the probability of COFP. Functional analysis also demonstrated that UA and myofascial pain genes were prominent in nitrogen and uracil metabolism, while GST and dentoalveolar pain genes were enriched in glutathione metabolism. Also, the study provided evidence that solute carrier family 2 member 9 (SLC2A9) and glutathione S-transferase alpha 2 (GSTA2) cause discomfort in the myofascial pain (OR = 1.003, 95% CI 1.000-1.006; p < .05) and dentoalveolar region (OR = 1.001, 95% CI 1.000-1.002; p < .05), respectively. CONCLUSIONS: In conclusion, this MR study indicates that genetically predicted myofascial pain was significantly associated with decreased UA and dentoalveolar pain was significantly associated with increased GST level. SLC2A9 inhibitor and GSTA2 inhibitor were novel chronic orofacial pain therapies and biomarkers, but clinical trials are called to examine if these oxidative biomarkers have the protective effect against orofacial pain, and further research are needed to explore the underlying mechanisms.

Stereodivergent Construction of 1,3-Chiral Centers via Tandem Asymmetric Conjugate Addition and Allylic Substitution Reaction.

Herein, we report a synthesis of cyclohexanones bearing multi-continuous stereocenters by combining copper-catalyzed asymmetric conjugate addition of dialkylzinc reagents to cyclic enones with iridium-catalyzed asymmetric allylic substitution reaction. Good to excellent yields, diastereoselectivity and enantioselectivity can be obtained. Unlike the stereodivergent construction of adjacent stereocenters (1,2-position) reported in the literature, the current reaction can achieve the stereodivergent construction of nonadjacent stereocenters (1,3-position) by a proper combination of two chiral catalysts with different enantiomers.

Inorganic Crystal Structure Prototype Database Based on Unsupervised Learning of Local Atomic Environments.

Recognition of structure prototypes from tremendous known inorganic crystal structures has been an important subject beneficial for materials science research and new materials design. The existing databases of inorganic crystal structure prototypes were mostly constructed by classifying materials in terms of the crystallographic space group information. Herein, we employed a distinct strategy to construct the inorganic crystal structure prototype database, relying on the classification of materials in terms of local atomic environments (LAEs) accompanied by unsupervised machine learning method. Specifically, we adopted a hierarchical clustering approach onto all experimentally known inorganic crystal structure data to identify structure prototypes. The criterion for hierarchical clustering is the LAE represented by the state-of-the-art structure fingerprints of the improved bond-orientational order parameters and the smooth overlap of atomic positions. This allows us to build up a LAE-based Inorganic Crystal Structure Prototype Database (LAE-ICSPD) containing 15,613 structure prototypes with defined stoichiometries. In addition, we have developed a Structure Prototype Generator Infrastructure (SPGI) package, which is a useful toolkit for structure prototype generation. Our developed SPGI toolkit and LAE-ICSPD are beneficial for investigating inorganic materials in a global way as well as accelerating the materials discovery process in the data-driven mode.

Correction: A first-principles study of the stability, electronic structure, and optical properties of halide double perovskite Rb2Sn1-xTexI6 for solar cell applications.

Correction for 'A first-principles study of the stability, electronic structure, and optical properties of halide double perovskite Rb2Sn1-xTexI6 for solar cell applications' by Muhammad Faizan et al., Phys. Chem. Chem. Phys., 2021, 23, 4646-4657, DOI: 10.1039/D0CP05827K.

A first-principles study of the stability, electronic structure, and optical properties of halide double perovskite Rb2Sn1-xTexI6 for solar cell applications.

Owing to their emerging role in solar cell technology, lead halide perovskites have aroused significant research interest in the recent past. However, due to its obvious toxicity, looking for a potential alternative to lead is becoming one of the most important pursuits in present times. We present our work based on density functional theory (DFT) investigating lead free defect perovskites (Rb2Sn1-xTexI6 (0 ≤x≤ 1)). In particular, we explore the crystal structure, thermodynamic stability, electronic structure, and optical properties of Rb2Sn1-xTexI6 (0 ≤x≤ 1) as a function of increasing Te concentration. Our results show that the Sn-Te alloyed perovskites exhibit considerable stability, a suitable band gap, small effective mass, and excellent light absorption. Especially, Rb2Sn0.75Te0.25I6 and Rb2Sn0.50Te0.50I6 have a direct band gap of 1.35 and 1.44 eV, respectively, which is highly favorable for use in a single-junction photovoltaic cell. We hope that our work will arouse the interest of experimental as well as theoretical scientists for synthesizing new materials and/or exploring the Sn-Te mix as a potential substitute for lead in photovoltaic materials.

Palladium-Catalyzed Dearomative Methoxyallylation of 3-Nitroindoles with Allyl Carbonates.

Herein we report a Pd-catalyzed dearomative methoxyallylation of 3-nitroindoles with readily available allyl carbonates. Good yields (up to 86 %) and diastereoselectivity (up to >20:1 dr) are obtained for a wide range of substrates. The compatibility of gram-scale synthesis and the relatively low catalyst loading (down to 1 mol % of [Pd]) enhance the practicality of this method. The kinetic experiments indicate that the rate-determining step of this reaction is the nucleophilic attack of the alkoxide anion.

Silver-Catalyzed Asymmetric Dearomatization of Electron-Deficient Heteroarenes via Interrupted Barton-Zard Reaction.

Herein we report a catalytic asymmetric dearomatization reaction of electron-deficient heteroarenes with α-substituted isocyanoacetates through an interrupted Barton-Zard reaction. A range of optically active pyrrolo[3,4-b]indole derivatives was obtained in good yields (up to 97 %) with high stereoselectivities (up to >20:1 dr and 97 % ee), using a catalytic system consisting of a cinchona-derived amino-phosphine and silver oxide. This reaction features wide substrate scope and mild conditions, and provides a new strategy for developing asymmetric dearomatization reactions.

Enantioselective Desymmetrization of Bisphenol Derivatives via Ir-Catalyzed Allylic Dearomatization.

Spirocyclic hexadienones with multiple stereogenic centers are frequently found in natural products but remain challenging targets to synthesize. Herein, we report the enantioselective desymmetrization of bisphenol derivatives via Ir-catalyzed allylic dearomatization reactions, affording spirocyclic hexadienone derivatives with up to three contiguous stereogenic centers in good yields (up to 90%) and excellent enantioselectivity (up to 99% ee). The high efficiency of this reaction is exemplified by the short reaction time (30 min), low catalyst loading (down to 0.2 mol %), and ability to perform the reaction on a gram-scale. The total syntheses of (+)-tatanan B and (+)-tatanan C were also realized using this Ir-catalyzed allylic dearomatization reaction as a key step.

Pd-Catalyzed Dearomatization of Anthranils with Vinylcyclopropanes by [4+3] Cyclization Reaction.

Dearomatization of anthranils with vinylcyclopropanes (VCPs) by Pd-catalyzed [4+3] cyclization reaction has been realized. In the presence of a catalytic amount of borane as an activator, bridged cyclic products were obtained in good to excellent yields with excellent stereoselectivities. By introducing a chiral PHOX ligand (L5), asymmetric dearomatization reactions of anthranils with vinylcyclopropanes proceeded with excellent enantioselectivity. Borane plays a key role for the reactivity, likely owing to the formation of a borane-anthranil complex which has been confirmed by NMR experiments.

Enhancing myocardial infarction treatment through bionic hydrogel-mediated spatial combination therapy via mtDNA-STING crosstalk modulation.

Myocardial infarction (MI)-induced impaired cardiomyocyte (CM) mitochondrial function and microenvironmental inflammatory cascades severely accelerate the progression of heart failure for compromised myocardial repair. Modulation of the crosstalk between CM mitochondrial DNA (mtDNA) and STING has been recently identified as a robust strategy in enhancing MI treatment, but remains seldom explored. To develop a novel approach that can address persistent myocardial injury using this crosstalk, we report herein construction of a biomimetic hydrogel system, Rb1/PDA-hydrogel comprised of ginsenoside Rb1/polydopamine nanoparticles (Rb1/PDA NPs)-loaded carboxylated chitosan, 4-arm-PEG-phenylboronic acid (4-arm-PEG-PBA), and 4-arm-PEG-dopamine (4-arm-PEG-DA) crosslinked networks. An optimized hydrogel formulation presents not only desired adhesion properties to the surface of the myocardium, but also adaptability for deep myocardial injection, resulting in ROS scavenging, CM mitochondrial function protection, M1 macrophage polarization inhibition through the STING pathway, and angiogenesis promotion via an internal-external spatial combination. The enhanced therapeutic efficiency is supported by the histological analysis of the infarcted area, which shows that the fibrotic area of the MI rats decreases from 58.4% to 5.5%, the thickness of the left ventricular wall increases by 1-fold, and almost complete recovery of cardiac function after 28 days of treatment. Overall, this study reported the first use of a strong adhesive and injectable hydrogel with mtDNA and STING signaling characteristics for enhanced MI treatment via an internal-external spatial combination strategy.

Designing semiconductor materials and devices in the post-Moore era by tackling computational challenges with data-driven strategies.

In the post-Moore's law era, the progress of electronics relies on discovering superior semiconductor materials and optimizing device fabrication. Computational methods, augmented by emerging data-driven strategies, offer a promising alternative to the traditional trial-and-error approach. In this Perspective, we highlight data-driven computational frameworks for enhancing semiconductor discovery and device development by elaborating on their advances in exploring the materials design space, predicting semiconductor properties and optimizing device fabrication, with a concluding discussion on the challenges and opportunities in these areas.

The Synthesis of Fluorinated Carbohydrates Using Sulfuryl Fluoride as the Deoxyfluorination Reagent.

Fluorination of carbohydrates has been one of the strategies to increase their enzymatic and chemical stabilities and reduce their hydrophilicities, making this modification attractive for drug discovery purposes. The synthesis of monofluorinated carbohydrates was achieved under mild conditions by using SO2F2 as the deoxyfluorination reagent in the presence of a base without extra fluoride additives. This method features low toxicity, easy availability, low cost, and high efficiency and can be subjected to diverse sugar units.

Pd-Catalyzed intermolecular asymmetric allylic dearomatization of 1-nitro-2-naphthols with MBH adducts.

An asymmetric allylic dearomatization reaction of 1-nitro-2-naphthol derivatives with Morita-Baylis-Hillman (MBH) adducts has been developed. By utilizing Pd catalyst derived from Pd(OAc)2 and Trost ligand (R,R)-L1, the reaction proceeded smoothly in 1,4-dioxane at room temperature, affording substituted ß-naphthalenones in good yields (up to 92%) and enantioselectivity (up to 90% ee). A range of substituted 1-nitro-2-naphthols and MBH adducts were found to be compatible under the optimized conditions. This reaction provides a convenient method for the synthesis of enantioenriched 1-nitro-ß-naphthalenone derivatives.

Outcome of patients with differentiated thyroid cancer treated with empirical radioiodine therapy on the basis of Thyroglobulin Elevation Negative Iodine Scintigraphy (TENIS) syndrome without structural disease: a retrospective cohort study.

BACKGROUND: For differentiated thyroid cancer (DTC) patients with thyroglobulin (Tg) elevation and negative iodine scintigraphy (commonly termed "TENIS" syndrome) after thyroidectomy, radioactive iodine (RAI) therapy, and thyroid-stimulating hormone (TSH) suppression therapy, empirical RAI therapy may be considered. However, the outcome data of TENIS syndrome without structural disease after empirical RAI therapy have not shown clear evidence of improvement in survival. We assessed the efficacy of such empirical RAI therapy in TENIS syndrome without structural disease and evaluated the progression-free survival (PFS). METHODS: A total of 80 papillary thyroid cancer (PTC) patients with TENIS syndrome without structural disease were included in this retrospective study. 52 patients were treated with empirical RAI therapy while another 28 patients were untreated. The progression-free survival (PFS) of both groups was defined as the main outcome. The secondary outcome was the comparison of serum Tg levels 12 months after being diagnosed as TENIS syndrome. RESULTS: The PFS of the empirical RAI therapy group was better than the untreated group (p < 0.001). Moreover, there was significant difference in Tg normalization between patients treated with empirical therapy and without treatment (p = 0.001). Empirical RAI therapy (p = 0.001) predicts better PFS. Male gender (p = 0.041) and empirical RAI therapy (p = 0.002) predict better remission in serum Tg level. CONCLUSION: Patients with TENIS syndrome without structural disease can benefit from empirical RAI therapy in both PFS and Tg normalization.

CoFe Alloy-Coupled Mo2C Wrapped by Nitrogen-Doped Carbon as Highly Active Electrocatalysts for Oxygen Reduction/Evolution Reactions.

Molybdenum carbide (Mo2C) with a Pt-like d-band electron structure exhibits certain activities for oxygen reduction and evolution reactions (ORR/OER) in alkaline solutions, but it is questioned due to its poor OER stability. Combining Mo2C with transition metals alloy is a feasible way to stabilize its electrochemical activity. Herein, CoFe-Prussian blue analogues are used as a precursor to compound with graphitic carbon nitride and Mo6+ to synthesize FeCo alloy and Mo2C co-encapsulated N-doped carbon (NG-CoFe/Mo2C). The morphology of NG-CoFe/Mo2C (800 °C) shows that CoFe/Mo2C heterojunctions are well wrapped by N-doped graphitic carbon. Carbon coating not only inhibits growth and agglomeration of Mo2C/CoFe, but also enhances corrosion resistance of NG-CoFe/Mo2C. NG-CoFe/Mo2C (800 °C) exhibits an excellent half-wave potential (E1/2 = 0.880 V) for ORR. It also obtains a lower OER overpotential (325 mV) than RuO2 due to the formation of active species (CoOOH/ß-FeOOH, as indicated by in-situ X-ray diffraction tests). E1/2 shifts only 6 mV after 5000 ORR cycles, while overpotential for OER increases only 19 mV after 1000 cycles. ORR/OER performances of NG-CoFe/Mo2C (800 °C) are close to or better than those of many recently reported catalysts. It provides an interfacial engineering strategy to enhance the intrinsic activity and stability of carbides modified by transition-metals alloy for oxygen electrocatalysis.

Occurrence, fate and potential health risks of antibiotic resistomes in a constructed wetlands-reservoir ecosystem for drinking water source improvement.

The development of effective and feasible engineering technologies to control the transmission of antibiotic resistance genes (ARGs) and pathogenic antibiotic-resistant bacteria (PARB) form drinking water sources is urgently needed for ensuring drinking water safety. In this study, metagenomic analysis was applied to systematically explore the full profiles, removal, and potential health risks of antibiotic resistomes in a large constructed wetlands-reservoir ecosystem (CWs-R) for drinking water source improvement. A total of 343 ARG subtypes belonging to 18 ARG types were identified from water and sediment samples in the CWs-R ecosystem, with an average abundance of 0.339 copies/cell, and bacitracin and multidrug resistance genes were the predominant ARG types in the water and sediment, respectively. The CWs-R ecosystem showed an excellent removal efficiency of ARGs and mobile genetic elements (MGEs) in water, with the total removal rate reaching 64.82 % and 77.09 %, respectively, among which the emergent plant zone and ecological storage unit played major roles. The metagenomic assembly tracked many mobile ARGs and opportunistic pathogens in the CWs-R ecosystem and identified 19 contigs as ARG-carrying pathogens, including Staphylococcus aureus, Salmonella enterica, Escherichia coli, and Klebsiella pneumonia. Overall, the CWs-R ecosystem has an important role in reducing the potential public health risks posed by antibiotic resistomes in drinking water sources but still cannot fully eliminate them. Therefore, we further classified water and sediment samples in the CWs-R ecosystem and identified potential ARGs and PARB indicators based on the metagenomic analysis results by considering the potential for horizontal transfer of ARGs to opportunistic pathogens. Taken together, this work demonstrates the CWs-R ecosystem as an economical and feasible engineering technology to reduce the dissemination of antibiotic resistomes in the drinking water source, provides useful information for monitoring and controlling antibiotic resistance in similar water sources, and ensures biosafety of drinking water.