Nanosphere Chain Model of Magnetic Fluid and Its Dynamic Performance.

The magnetorheological effect is a critically important mechanical property of magnetic fluids. Accurately capturing the macroscopic properties of magnetorheological fluids with elongated particle forms, such as nanosphere chains, remains a challenging task, particularly due to the complexities arising from particle asymmetry. Traditional particle dynamics primarily utilize spherical particles as computational units, but this approach can lead to significant inaccuracies, especially when analyzing nonspherical magnetorheological fluids, due to the neglect of particle asymmetry. In this work, an advanced particle dynamics model has been developed by integrating the rotation and collision of these asymmetric particles, specifically tailored for the configuration of nanosphere chains. This model exhibits a significant reduction in error by a factor of 3.883, compared to conventional particle models. The results demonstrate that alterations in the geometric characteristics of magnetic nanosphere chains can cause changes in mesoscopic structures and magnetic potential energy, thereby influencing the mechanical properties at the macroscopic level. This work has developed an accurate mesoscopic simulation method for calculating chain-type magnetorheological fluids, establishing a connection between mesoscopic structures and macroscopic properties, and unveiling the tremendous potential for accelerating the design of next-generation magnetic fluids using this approach.

Ultra-Stretchable Spiral Hybrid Conductive Fiber with 500%-Strain Electric Stability and Deformation-Independent Linear Temperature Response.

Stretchable configuration occupies priority in devising flexible conductors used in intelligent electronics and implantable sensors. While most conductive configurations cannot suppress electrical variations against extreme deformation and ignore inherent material characteristics. Herein, a spiral hybrid conductive fiber (SHCF) composed of aramid polymeric matrix and silver nanowires (AgNWs) coating is fabricated through shaping and dipping processes. The homochiral coiled configuration mimicked by plant tendrils not only enables its high elongation (958%), but also generates a superior deformation-insensitive effect to existing stretchable conductors. The resistance of SHCF maintains remarkable stability against extreme strain (500%), impact damage, air exposure (90 days), and cyclic bending (150 000 times). Moreover, the thermal-induced densification of AgNWs on SHCF achieves precise and linear temperature response toward a broad range (-20 to 100 °C). Its sensitivity further manifests high independence to tensile strain (0%-500%), allowing for flexible temperature monitoring of curved objects. Such unique strain-tolerant electrical stability and thermosensation hold broad prospects for SHCF in lossless power transferring and expeditious thermal analysis.

In situ Thermal-Responsive Magnetic Hydrogel for Multidisciplinary Therapy of Hepatocellular Carcinoma.

Current surgical single modality treatments for hepatocellular carcinoma (HCC) were restricted by recurrence, blood loss, significant trauma, and poor prognostic. Although multidisciplinary strategies for HCC treatment have been highly recommended by the clinical guidelines, there was limited choice of materials and treatments. Herein, we reported an in situ formed magnetic hydrogel with promising bioapplicable thermal-responsiveness, strong adhesion in wet conditions, high magnetic hyperthermia, and biocompatibility, leading to efficient HCC multidisciplinary treatment including postoperative treatment and transarterial embolization therapy. In vivo results indicated that this hydrogel could reduce the postoperative recurrence rate. The hemostatic ability of the thermal-responsive hydrogel was further demonstrated in both the liver scratch model and liver tumor resection. Computed tomography imaging suggested that the hydrogel could completely embolize the arterial vessels of rabbit liver tumor by vascular intervention operation, which could serve as multidisciplinary responsive materials to external magnetic field and body temperature for HCC treatment.

Injectable magnetic montmorillonite colloidal gel for the postoperative treatment of hepatocellular carcinoma.

Bioactive materials have been extensively developed for the adjuvant therapy of cancer. However, few materials can meet the requirements for the postoperative resection of hepatocellular carcinoma (HCC) due to massive bleeding and high recurrence. In particular, combination therapy for HCC has been highly recommended in clinical practice, including surgical resection, interventional therapy, ablation therapy and chemotherapy. Herein, an injectable magnetic colloidal gel (MCG) was developed by controllable electrostatic attraction between clinically available magnetic montmorillonites and amphoteric gelatin nanoparticles. The optimized MCG exhibited an effective magnetic heating effect, remarkable rheological properties, and high gel network stability, realizing the synergistic treatment of postoperative HCC by stimuli-responsive drug delivery, hemostasis and magnetic hyperthermia. Furthermore, a minimal invasive MCG-induced interventional magnetic hyperthermia therapy (MHT) under ultrasound guidance was realized on hepatic tumor rabbits, providing an alternative therapeutics to treat the postoperative recurrence. Overall, MCG is a clinically available injectable formulation for adjuvant therapy after HCC surgical resection.

Experiments and Simulations on the Magnetorheology of Magnetic Fluid Based on Fe3O4 Hollow Chains.

This work reports an experiment/simulation combination study on the magnetorheological (MR) mechanism of magnetic fluid based on Fe3O4 hollow chains. The decrease of shear stress versus the increasing magnetic field was observed in a dilute magnetic fluid. Hollow chains exhibited a higher MR effect than pure Fe3O4 hollow nanospheres under a small magnetic field. A modified particle level simulation method including the translational and rotational motion of chains was developed to comprehend the correlation between rheological properties and microstructures. Sloping cluster-like microstructures were formed under a weak external field (24 mT), while vertical column-like microstructures were observed under a strong field (240 mT). The decrease of shear stress was due to the strong reconstruction process of microstructures and the agglomeration of chains near the boundaries. The chain morphology increased the dip angle of microstructures and thus improved the MR effect under a weak field. This advantage made Fe3O4 hollow chains to be widely applied for small and low-power devices in the biomedical field. Dimensionless viscosity as a function of the Mason number was collapsed onto linear master curves. Magnetic fluid in Poiseuille flow in a microfluidic channel was also observed and simulated. A qualitative and quantitative correspondence between simulations and experiments was obtained.

Controlling Hydrogel Properties by the Cooperative Harvesting of the Components of Sunlight.

The utilization of the full spectrum of sunlight from ultraviolet to infrared to cooperatively control the properties of hydrogels is the key to developing efficient sunlight-responsive hydrogels, but there are significant challenges. The photoresponsive hydrogel developed here formed by azobenzene-containing polyzwitterionic chains possesses capabilities for simultaneously utilizing light from the ultraviolet to the infrared to cooperatively facilitate the gel-to-sol transitions. The ultraviolet and visible light can be converted into mechanical energy simultaneously to synergistically power the dynamic wagging of azobenzene groups, while the infrared light can be converted into kinetic energy of the zwitterionic groups to promote the wagging of the azobenzene groups. Cooperative action between the major components of sunlight can be applied to control a range of important properties of the hydrogel including wettability, adhesion, molecular release, self-healing, and mineralization. The work presented here demonstrates a novel strategy for harvesting all the major components of sunlight to control the properties of photoresponsive materials.

Magnetically Separable Nanocatalyst with the Fe3O4 Core and Polydopamine-Sandwiched Au Nanocrystal Shell.

This work reports a novel Fe3O4@polydopamine/Au/polydopamine core/shell nanocomposite toward a magnetically separable nanocatalyst. Because the polydopamine (PDA) layer-sandwiched Au nanocrystals were prepared by a layer-by-layer method, the content of Au could be controlled by varying the Au shell number (such as burger-like Fe3O4@PDA/Au/PDA/Au/PDA). Fe3O4@PDA/Au/PDA exhibited excellent catalytic activity in reducing p-nitrophenol because the substrate could penetrate the PDA shell. Owing to the protection of the PDA shell, Fe3O4@PDA/Au/PDA presented higher cyclability than Fe3O4@PDA/Au. The activity of Fe3O4@PDA/Au/PDA maintained 95% after 7 cycles, while that of Fe3O4@PDA/Au was only 61%. The detailed cycling catalytic mechanism was investigated, and it was found that the catalytic rate of Fe3O4@PDA/Au/PDA/Au/PDA was faster than that of Fe3O4@PDA/Au/PDA because of the higher Au content. Interestingly, this method could be extended for other magnetic nanocomposites with two different kinds of noble metal nanocrystals integrated within one particle, such as Fe3O4@PDA/Au/PDA/Ag/PDA and Fe3O4@PDA/Au/PDA/Pd/PDA.

Simulation of the optimal diameter and wall thickness of hollow Fe3O4 microspheres in magnetorheological fluids.

This work reported a simulation study on the optimal diameter (D) and wall thickness (H) of hollow Fe3O4 microspheres to improve the magnetorheological (MR) effect. Modified formulae for the magnetic dipolar force, van der Waals force, and hydrodynamic drag force were employed in the simulation model. Typical evolution of shear stress and microstructures in steady shear flow was obtained. The shear stress-strain curve was divided into linear, fluctuant, and homeostasis regions, which were related to the inclination of particle chains and the lateral aggregation. For hollow Fe3O4 microspheres with different diameters and wall thicknesses, the shear stress curves collapsed onto a quadratic master curve. The best wall thickness was H = 0.39D for a 20 wt% MR fluid and H = 0.35D for a 40 wt% MR fluid, while the optimal diameter was D = 1000 nm and D = 100 nm, respectively. The maximum shear stress of the 40 wt% MR fluid was twice that of the 20 wt% MR fluid. The change of shear stress was due to the competition that results among the magnetic interaction, number of neighbors, tightness, and orientation of the particle chains. Simulated dimensionless viscosity data as a function of Mason number for various diameters, wall thicknesses, and weight fractions collapsed onto a single master curve. The simulated shear stress under both a magnetic field and shear rate sweep matched well with experiments.

Smart wearable Kevlar-based safeguarding electronic textile with excellent sensing performance.

A novel S-ST/MWCNT/Kevlar-based wearable electronic textile (WET) with enhanced safeguarding performance and force sensing ability was fabricated. Stab resistance performance tests under quasi-static and dynamic conditions show that the maximum resistance force and penetration impact energy for the WET are 18 N and 11.76 J, which represent a 90% and 50% increment with respect to the neat Kevlar, respectively. Dynamic impact resistance tests show that the WET absorbs all the impact energy. The maximum resistance force of the WET is 1052 N, which represents an improvement of about 190% with respect to neat Kevlar. With the incorporation of multi-walled carbon nanotubes (MWCNTs), the WET can achieve a stable electrical conductivity of ∼10-2 S m-1, and the conductivity is highly sensitive to external mechanic forces. Notably, the sensing fabric also exhibits an outstanding ability to detect and analyze external forces. In addition, it can be fixed at any position of the human body and exhibits an ideal monitoring performance. Because of its flexibility, high sensitivity to various types of deformations and excellent safeguarding performance, the WET has a strong potential for wearable monitoring devices that simultaneously provide body protection and monitor the movements of the human body under various conditions.

Noble Metal-Iron Oxide Hybrid Nanomaterials: Emerging Applications.

This account provides an overview of current research activities that focus on the synthesis and applications of nanomaterials from noble metal (e.g., Au, Ag, Pd) and iron oxide (Fe3O4) hybrids. An introduction to the synthetic strategies that have been developed for generating M-Fe3O4 nanomaterials with different novel structures is presented. Surface functionalization and bioconjugation of these hybrid nanoparticles and nanocomposites are also reviewed. The utilization of the advantageous properties of both noble metals and iron oxide for a variety of applications, such as theranostics, gene delivery, biosensing, cell sorting, bioseparation, and catalysis, is discussed and highlighted. Finally, future trends and perspectives of these sophisticated nanocomposites are outlined. The fundamental requirements underpinning the effective preparation of M-Fex Oy hybrid nanomaterials shed light on the future development of heterogeneous catalysts, nanotheranostics, nanomedicines, and other chemical technologies.

Magnetic field dependent electro-conductivity of the graphite doped magnetorheological plastomers.

In this work we reported a novel graphite doped conductive magnetorheological plastomer (GMRP) with magnetic field dependent electro-conductivity. The conductivity of the GMRPs increased by increasing the content of the graphite particles, while it decreased with the graphite size. When the graphite content reached 15 wt%, the conductivity of GMRPs is approximately 10 000 times higher than the non-doped MRP. Because the iron particles in the GMRPs were magnetic, the conductivity of the GMRPs was magnetically sensitive. Upon applying a 780 mT magnetic field, the electric conductivity could increase about 1000 times larger than the one under zero magnetic field. A particle-particle resistance model was developed to investigate the influence of the magnetic field and graphite doping on the conductivity, and the fitting curve matched the experimental results very well. Finally, a magnetically controllable on-off switch based on GMRPs was proposed and its working mechanism was discussed.

Magneto-induced stress enhancing effect in a colloidal suspension of paramagnetic and superparamagnetic particles dispersed in a ferrofluid medium.

The magneto-induced stress and relative microstructure in a colloidal suspension of paramagnetic and superparamagnetic particles dispersed in a ferrofluid medium is studied using particle-level dynamics simulation. It shows that the stress perpendicular to the direction of an external uniaxial magnetic field can be strongly enhanced by increasing the ratio of paramagnetic particles to approaching that of superparamagnetic particles. The magnetic field-induced net-like or embedded chain-like microstructures formed by paramagnetic and superparamagnetic particles contribute to this stress enhancing effect.

SiO2@AuAg/PDA hybrid nanospheres with photo-thermally enhanced synergistic antibacterial and catalytic activity.

Wastewater discharged from industrial, agricultural and livestock production contains a large number of harmful bacteria and organic pollutants, which usually cause serious harm to human health. Therefore, it is urgent to find a "one-stone-two-birds" strategy with good antimicrobial and pollutant degradation activity for treating waste water. In this paper, SiO2@AuAg/Polydopamine (SiO2@AuAg/PDA) core/shell nanospheres, which possessed synergistic "Ag+-release-photothermal" antibacterial and catalytic behaviors, have been successfully prepared via a simple in situ redox polymerization method. The SiO2@AuAg/PDA nanospheres showed good catalytic activity in reducing 4-nitrophenol to 4-aminophenol (0.576 min-1 mg-1). Since the AuAg nanoclusters contain both gold and silver elements, they provided a high photothermal conversion efficiency (48.1%). Under NIR irradiation (808 nm, 2.5 W-2), the catalytic kinetics were improved by 2.2 times. Besides the intrinsic Ag+-release, the photothermal behavior originating from the AuAg bimetallic nanoclusters and the PDA component of SiO2@AuAg/PDA also critically improved the antibacterial performance. Both E. coli and S. aureus could be basically killed by SiO2@AuAg/PDA nanospheres at a concentration of 90 µg mL-1 under NIR irradiation. This "Ag+-release-photothermal" coupled sterilization offers a straightforward and effective approach to antimicrobial therapy, and further exhibits high potential in nanomedicine for combating bacterial contamination in environmental treatment and biological fields.

Minimally Invasive Delivery of Percutaneous Ablation Agent via Magnetic Colloidal Hydrogel Injection for Treatment of Hepatocellular Carcinoma.

Percutaneous thermotherapy, a minimally invasive operational procedure, is employed in the ablation of deep tumor lesions by means of target-delivering heat. Conventional thermal ablation methods, such as radiofrequency or microwave ablation, to a certain extent, are subjected to extended ablation time as well as biosafety risks of unwanted overheating. Given its effectiveness and safety, percutaneous thermotherapy gains a fresh perspective, thanks to magnetic hyperthermia. In this respect, an injectable- and magnetic-hydrogel-construct-based thermal ablation agent is likely to be a candidate for the aforementioned clinical translation. Adopting a simple and environment-friendly strategy, a magnetic colloidal hydrogel injection is introduced by a binary system comprising super-paramagnetic Fe3O4 nanoparticles and gelatin nanoparticles. The colloidal hydrogel constructs, unlike conventional bulk hydrogel, can be easily extruded through a percutaneous needle and then self-heal in a reversible manner owing to the unique electrostatic cross-linking. The introduction of magnetic building blocks is exhibited with a rapid magnetothermal response to an alternating magnetic field. Such hydrogel injection is capable of generating heat without limitation of deep penetration. The materials achieve outstanding therapeutic results in mouse and rabbit models. These findings constitute a new class of locoregional interventional thermal therapies with minimal collateral damages.

Gold and iron oxide hybrid nanocomposite materials.

This critical review provides an overview of current research activities that focused on the synthesis and application of multi-functional gold and iron oxide (Au-Fe(x)O(y)) hybrid nanoparticles and nanocomposites. An introduction of synthetic strategies that have been developed for generating Au-Fe(x)O(y) nanocomposites with different nanostructures is presented. Surface functionalisation and bioconjugation of these hybrid nanoparticles and nanocomposites are also reviewed. A variety of applications such as theranostics, gene delivery, biosensing, cell sorting, bio-separation, and catalysis is discussed and highlighted. Finally, future trends and perspectives of these sophisticated nanocomposites are outlined. Underpinning the fundamental requirements for effectively forming Au-Fe(x)O(y) hybrid nanocomposite materials would shed light on future development of nanotheranostics, nanomedicines, and chemical technologies. It would be interesting to investigate such multi-component composite nanomaterials with different novel morphologies in the near future to advance chemistry, biology, medicine, and engineering multi-disciplinary research (120 references).

AgPd nanocages sandwiched between a MXene nanosheet and PDA layer for photothermally improved catalytic activity and antibacterial properties.

In this work, a MXene@AgPd/polydopamine (PDA) nanosheet with excellent photothermal conversion efficiency was successfully synthesized by a simple redox-oxidative polymerization method. Interestingly, AgPd bimetallic nanocrystals sandwiched between a MXene nanosheet and PDA layer have cage-like nanostructure, which is favorable for high catalytic efficiency and antibacterial performance. Importantly, the MXene@AgPd/PDA nanosheet exhibits good catalytic activity for the reduction of 4-nitrophenol (1.2 min-1 mg-1) and the catalytic dynamics can be improved by about 1.2 times under NIR (near-infrared light, 808 nm, and 2.5 W cm-2) irradiation. As the PDA shell is well protected, the MXene@AgPd/PDA nanosheet retained more than 90% catalytic activity after 6 cycles. In addition, due to the presence of the Ag component, the MXene@AgPd/PDA nanosheet exhibited good antibacterial activity against both Gram-negative (E. coli) and Gram-positive (S. aureus) bacteria. Under near-infrared light irradiation, its antibacterial activity was further enhanced due to the NIR photothermal effect.

Flexible and Stretchable Elastomer Composites Based on Lightweight Liquid Metal Foam Spheres with Pod-like Contacts.

Liquid metal (LM) is increasingly employed as a conductive filler in soft and flexible elastomer composites owing to its favorable conductivity and liquid fluidity. However, the high density of LM inevitably increases the weight of composites, which brings limitations in large-area and weight-sensitive applications. This work reports a flexible and stretchable elastomer composite composed of pod-like contacting lightweight LM foam spheres and polydimethylsiloxane matrix (LMS/PDMS). The lightweight LMS reduces the amount of LM used in the preparation process while imparting good electrical conductivity and deformability to the composite. The different contact modes of LMS endow the final composites with diverse strain sensitivity. The mechanism of interfacial contact conduction between the LMS with different melting points has been systematically studied, and the result shows that the liquid-solid contact mode of LMS further improves the strain sensitivity of the composite. Moreover, the composite also has satisfactory electrothermal properties and the temperature can quickly reach 70 °C within 30 s, showing good applicability in electric heating. Finally, the composites containing LMS with different contact modes can be developed as multifunctional sensors to detect human activities, temperature variation, and even underwater vibration, demonstrating the great potential in next-generation sensors and electronics.

NIR-induced improvement of catalytic activity and antibacterial performance over AuAg nanorods in Rambutan-like Fe3O4@AgAu@PDA magnetic nanospheres.

Pathogenic bacteria and difficult-to-degrade pollutants in water have been serious problems that always plague people. Therefore, finding a "one stone-two birds" method that can quickly catalyze the degradation of pollutants and show effective antibacterial behavior become an urgent requirement. This work reports a facile one-step strategy for fabricating a Rambutan-like Fe3O4@AgAu@PDA (Fe3O4@AgAu@Polydopamine) core/shell nanosphere with both catalytic and antibacterial activities which can be critically improved by externally applying an NIR laser irradiation (NIR, 808 nm) and a rotating magnetic field. Typically, the Rambutan-like Fe3O4@AgAu@PDA nanosphere have a rather rough surface due to the AuAg bimetallic nanorods sandwiched between the Fe3O4 core and the PDA shell. Owing to the penetrated PDA shell, AgAu nanorods show high and magnetically recyclable photothermal-enhanced catalytic activity for the reduction of 4-nitrophenol to 4-aminophenol and they can also be applied to initiate TMB oxidation under the help of NIR heating condition. Moreover, Fe3O4@AgAu@PDA shows a moderate antibacterial activity due to the weak release of Ag+. Under applying a rotating external magnetic field, the rough-surface Fe3O4@AgAu@PDA nanospheres produce a controllable magnetolytic force on the bacterial due to their good affinity. As a result, the Fe3O4@AgAu@PDA nanospheres show a "magnetolytic-photothermal-Ag+" synergistic antibacterial behavior against E. coli and S. aureus.

Wearable Safeguarding Leather Composite with Excellent Sensing, Thermal Management, and Electromagnetic Interference Shielding.

This work illustrates a "soft-toughness" coupling design method to integrate the shear stiffening gel (SSG), natural leather, and nonwoven fabrics (NWF) for preparing leather/MXene/SSG/NWF (LMSN) composite with high anti-impact protecting, piezoresistive sensing, electromagnetic interference (EMI) shielding, and human thermal management performance. Owing to the porous fiber structure of the leather, the MXene nanosheets can penetrate leather to construct a stable 3D conductive network; thus both the LM and LMSN composites exhibit superior conductivity, high Joule heating temperature, and an efficient EMI shielding effectiveness. Due to the excellent energy absorption of the SSG, the LMSN composites possess a huge force-buffering (about 65.5%), superior energy dissipation (above 50%), and a high limit penetration velocity of 91 m s-1 , showing extraordinary anti-impact performance. Interestingly, LMSN composites possess an unconventional opposite sensing behavior to piezoresistive sensing (resistance reduction) and impact stimulation (resistance growing), thus they can distinguish the low and high energy stimulus. Ultimately, a soft protective vest with thermal management and impact monitoring performance is further fabricated, and it shows a typical wireless impact-sensing performance. This method is expected to have broad application potential in the next-generation wearable electronic devices for human safeguarding.

Size-dependent magnetomechanically enhanced photothermal antibacterial effect of Fe3O4@Au/PDA nanodurian.

The global health crisis of bacterial resistance to antibiotics requires innovative antibacterial strategies. One promising solution is the exploitation of multifunctional nanoplatforms based on non-resistant antibacterial mechanisms. This work reports a novel Fe3O4@Au/polydopamine (PDA) nanodurian with excellent photothermal-magnetomechanic synergistic antibacterial effects. The one-step formed Au/PDA hybrid shell provides good photothermal properties and spiky surfaces for enhanced magnetomechanic effects. Upon near-infrared (NIR) irradiation, the Fe3O4@Au/PDA nanodurian (200 µg mL-1) achieved nearly 100% antibacterial effect against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The efficiency of photothermal antimicrobial activity was further enhanced by the application of a rotating magnetic field (RMF), with the sterilization efficiency being increased by up to more than a half compared to the action alone. Interestingly, the size of the nanodurian has a significant impact on the synergistic sterilization effect, with larger particles showing a superior performance due to stronger chain-like structures in the magnetic field. Finally, the Fe3O4@Au/PDA nanodurian also demonstrates effective biofilm removal, with larger particles exhibiting the best eradication effect under the photothermal-magnetomechanic treatment. Overall, this magnetic field enhanced photothermal antibacterial strategy provides a promising broad-spectrum antimicrobial solution to combat bacterial infections. Thus, it possesses great potential in future nanomedicine and pollution treatment.