RESUMEN
The field of nanoalloys has been advancing at a rapid pace in the last two decades. Many new characterization methods and theoretical advances have produced a substantial knowledge of the nanoalloys' properties and structure. Most of the work has been limited to binary alloys. A path forward for the field will be the study of nanoalloys with three or more metals. Adding new components will produce new properties and possibly more fabrication controls. In this paper, we will discuss the challenges that will arise in multi-metallic nanoalloys. We will show that entropy and twin boundaries play a dominant role in multi-metallic alloys.
RESUMEN
Highly crystalline indium tin oxide (ITO) nanowires were grown via a vapor-liquid-solid method, with thermal tolerance up to â¼1300 °C. We report the electric and thermoelectric properties of the ITO nanowires before and after heat treatments and draw conclusions about their applicability as thermoelectric building blocks in nanodevices that can operate in high temperature conditions. The Seebeck coefficient and the thermal and electrical conductivities were measured in each individual nanowire by means of specialized micro-bridge thermometry devices. Measured data was analyzed and explained in terms of changes in charge carrier density, impurities and vacancies due to the thermal treatments.
RESUMEN
Heteroatom-doped metal-free graphene has been widely studied as the catalyst for the oxygen reduction reaction (ORR). Depending on the preparation method and the dopants, the ORR activity varies ranging from a two-electron to a four-electron pathway. The different literature reports are difficult to correlate due to the large variances. However, due to the potential metal contamination, the origin of the ORR activity from "metal-free" graphene remains confusing and inconclusive. Here we decipher the ORR catalytic activities of diverse architectures on graphene derived from reduced graphene oxide. High angle annular dark field scanning transmission electron microscopy, X-ray absorption near edge structure, extended X-ray absorption fine structure, and trace elemental analysis methods are employed. The mechanistic origin of ORR activity is associated with the trace manganese content and reaches its highest performance at an onset potential of 0.94 V when manganese exists as a mononuclear-centered structure within defective graphene. This study exposes the deceptive role of trace metal in formerly thought to be metal-free graphene materials. It also provides insight into the design of better-performing catalyst for ORR by underscoring the coordination chemistry possible for future single-atom catalyst materials.
RESUMEN
Conditions for the dispersion of molybdenum disulfide (MoS2) in aqueous solution at concentrations up to 0.12 mg mL(-1) using a range of nonionic, biocompatible block copolymers (i.e., Pluronics and Tetronics) are identified. Furthermore, the optimal Pluronic dispersant for MoS2 is found to be effective for a range of other 2D materials such as molybdenum diselenide, tungsten diselenide, tungsten disulfide, tin selenide, and boron nitride.
Asunto(s)
Materiales Biocompatibles/química , Nanoestructuras/química , Polímeros/química , Agua/química , Iones , Fenómenos Ópticos , Tamaño de la Partícula , Poloxámero/química , Análisis EspectralRESUMEN
The adsorption of very small rhenium clusters (2-13 atoms) supported on graphene was studied by high-angle annular dark field-scanning transmission electron microscopy (HAADF-STEM). The atomic structure of the clusters was fully resolved with the aid of density functional theory calculations and STEM simulations. It was found that octahedral and tetrahedral structures work as seeds to obtain more complex morphologies. Finally, a detailed analysis of the electronic structure suggested that a higher catalytic effect can be expected in Re clusters when adsorbed on graphene than in isolated ones.
Asunto(s)
Grafito/química , Renio/química , Adsorción , Microscopía Electrónica de Transmisión de Rastreo , Simulación de Dinámica MolecularRESUMEN
The antimicrobial properties of silver nanoparticles (AgNPs) have made these particles one of the most used nanomaterials in consumer products. Therefore, an understanding of the interactions (unwanted toxicity) between nanoparticles and human cells is of significant interest. The aim of this study was to assess the in vitro cytotoxicity effects of silver nanoclusters (AgNC, < 2 nm diameter) on peripheral blood mononuclear cells (PBMC). Using flow cytometry and comet assay methods, we demonstrate that exposure of PBMC to AgNC induced intracellular reactive oxygen species (ROS) generation, DNA damage and apoptosis at 3, 6 and 12 h, with a dose-dependent response (0.1, 1, 3, 5 and 30 µg ml(-1)). Advanced electron microscopy imaging of complete and ultrathin-sections of PBMC confirmed the cytotoxic effects and cell damage caused by AgNC. The present study showed that AgNC produced without coating agents induced significant cytotoxic effects on PBMC owing to their high aspect ratio and active surface area, even at much lower concentrations (<1 µg ml(-1)) than those applied in previous studies, resembling what would occur under real exposure conditions to nanosilver-functionalized consumer products.
Asunto(s)
Leucocitos Mononucleares/efectos de los fármacos , Nanopartículas del Metal/toxicidad , Plata/toxicidad , Adulto , Apoptosis/efectos de los fármacos , Células Cultivadas , Ensayo de Unidades Formadoras de Colonias , Ensayo Cometa , Daño del ADN , Femenino , Citometría de Flujo , Humanos , Técnicas In Vitro , Inflamación/inducido químicamente , Inflamación/patología , Masculino , Microscopía Electrónica , Tamaño de la Partícula , Especies Reactivas de Oxígeno/metabolismo , Propiedades de Superficie , Adulto JovenRESUMEN
The interactions between functionalized noble-metal particles in an aqueous solution are central to applications relying on controlled equilibrium association. Herein, we obtain the potentials of mean force (PMF) for pair-interactions between functionalized gold nanoparticles (AuNPs) in physiological saline. These results are based upon >1000 ns experiments in silico of all-atom model systems under equilibrium and non-equilibrium conditions. Four types of functionalization are built by coating each globular Au144 cluster with 60 thiolate groups: GS-AuNP (glutathionate), PhS-AuNP (thiophenol), CyS-AuNP (cysteinyl), and p-APhS-AuNP (para-amino-thiophenol), which are, respectively, negatively charged, hydrophobic (neutral-nonpolar), hydrophilic (neutral-polar), and positively charged at neutral pH. The results confirm the behavior expected of neutral (hydrophilic or hydrophobic) particles in a dilute aqueous environment, however the PMF curves demonstrate that the charged AuNPs interact with one another in a unique way-mediated by H2O molecules and an electrolyte (Na(+), Cl(-))-in a physiological environment. In the case of two GS-AuNPs, the excess, neutralizing Na(+) ions form a mobile (or 'dynamic') cloud of enhanced concentration between the like-charged GS-AuNPs, inducing a moderate attraction (â¼25 kT) between them. Furthermore, to a lesser degree, for a pair of p-APhS-AuNPs, the excess, neutralizing Cl(-) ions (less mobile than Na(+)) also form a cloud of higher concentration between the two like-charged p-APhS-AuNPs, inducing weaker yet significant attractions (â¼12 kT). On combining one GS- with one p-APhS-AuNP, the direct, attractive Coulombic force is completely screened out while the solvation effects give rise to moderate repulsion between the two unlike-charged AuNPs.
Asunto(s)
Oro/química , Nanopartículas del Metal/química , Cloruro de Sodio/química , Cisteína/química , Electrólitos/química , Glutatión/química , Concentración de Iones de Hidrógeno , Interacciones Hidrofóbicas e Hidrofílicas , Simulación de Dinámica Molecular , Fenoles/química , Compuestos de Sulfhidrilo/química , Agua/químicaRESUMEN
Hybrid carbon nanomaterials, such as those that incorporate carbon nanotubes into graphene sheets, have been found to display interesting mechanical and electrical properties because of their covalent bonding and π-π stacking domains. However, synthesis of these hybrid materials is limited by the high energetic cost of techniques like chemical vapor deposition. Here, we demonstrate the solvent- and gas-free synthesis of a 2D carbon nanotube/graphene network through flash Joule heating of pristine carbon nanotubes. The relative proportion of each morphology in the hybrid material can be tuned by varying the pulse time, as confirmed by Raman spectroscopy and microscopy. Triboindentation of epoxy composites made with the hybrid material shows increases of 162% and 64% to the hardness and Young's modulus, respectively, compared with the neat epoxy. These results demonstrate that flash Joule heating can be used to inexpensively convert carbon nanotubes into a hybrid network of nanotubes and graphene for use as an effective reinforcing additive in epoxy composites.
RESUMEN
Designing N-coordinated porous single-atom catalysts (SACs) for the oxygen reduction reaction (ORR) is a promising approach to achieve enhanced energy conversion due to maximized atom utilization and higher activity. Here, we report two Co(II)-porphyrin/ [2,1,3]-benzothiadiazole (BTD)-based covalent organic frameworks (COFs; Co@rhm-PorBTD and Co@sql-PorBTD), which are efficient SAC systems for O2 electrocatalysis (ORR). Experimental results demonstrate that these two COFs outperform the mass activity (at 0.85 V) of commercial Pt/C (20%) by 5.8 times (Co@rhm-PorBTD) and 1.3 times (Co@sql-PorBTD), respectively. The specific activities of Co@rhm-PorBTD and Co@sql-PorBTD were found to be 10 times and 2.5 times larger than that of Pt/C, respectively. These COFs also exhibit larger power density and recycling stability in Zn-air batteries compared with a Pt/C-based air cathode. A theoretical analysis demonstrates that the combination of Co-porphyrin with two different BTD ligands affords two crystalline porous electrocatalysts having different d-band center positions, which leads to reactivity differences toward alkaline ORR. The strategy, design, and electrochemical performance of these two COFs offer a pyrolysis-free bottom-up approach that avoids the creation of random atomic sites, significant metal aggregation, or unpredictable structural features.
RESUMEN
Nanoparticles and metallic clusters continue to make a remarkable impact on novel and emerging technologies. In recent years, there have been impressive advances in the controlled synthesis of clusters and their advanced characterization. One of the most common ways to determine the structures of nanoparticles and clusters is by means of X-ray diffraction methods. However, this requires the clusters to crystallize in a similar way to those used in protein studies, which is not possible in many cases. Novel methods based on electron diffraction have been used to efficiently study individual nanoparticles and clusters and these can overcome the obstacles commonly encountered during X-ray diffraction methods without the need for large crystals. These novel methodologies have improved with advances in electron microscopy instrumentation and electron detection. Here, we review advanced methodologies for characterizing metallic nanoparticles and clusters using a variety of electron diffraction procedures. These include selected area electron diffraction, nanobeam diffraction, coherent electron diffraction, precession electron diffraction, scanning transmission electron microcopy diffraction, and high throughput data analytics, which leverage deep learning to reduce the propensity for data errors and translate nanometer and atomic scale measurements into material data.
RESUMEN
OBJECTIVES: The aim of this study was to investigate the effect of the nanostructured hydroxyapatite (NHAp) and titanium dioxide nanoparticles (NTiO2) on dispersion in an adhesive containing monomers of Dipenta erythritol penta-acrylate monophosphate (PENTA) and Urethane dimethacrylate (UDMA), as well as evaluating the structural, optical and mechanical behavior of the composite material for dental aesthetic application. METHODS: The NHAp powders were synthesized through the wet chemical methods of hydrothermal and ultrasound-assisted precipitation. The microstructure, morphology and composition analysis of the powder of NHAp and NTiO2 were performed by scanning and transmission electron microscopy. The optical microscopic identification of the different colors was obtained due to varying the amounts of NHAp and NTiO2 in the adhesive. On the other hand, the diffuse reflectance spectra of the coatings were evaluated every 2nm with the wavelength from 400 to 800nm for combined specular and diffuse reflectance. The nanomechanical properties of the aesthetic coating such as (H), elastic modulus (E) and nanoscratching were evaluated by nanoindentation. The roughness of the composite coatings were evaluated by AFM. RESULTS: From different powders combinations, NHAP 75%Wt-NTiO2 %25Wt, at (10Wt %) into a dental adhesive, the resulting mixture manifested the optimum aesthetic white appearance. The scanning and transmission electron microscopy images confirmed that the HAp nanorods and TiO2 nanoparticles sized were 55nm and 20nm respectively prepared by the high-energy ball mixed process. The values of nanomechanical properties of the optimum aesthetic coating were hardness, H=3.2±0.3GPa, elastic modulus, E=78±3GPa, Yield point, Y=107MPa±2 and scratching, maximum wear track deformation 3.7±0.12 µm2. The percentage of reflectance to optimum aesthetic white appearance was of 46.83% at 423nm of wavelength. CONCLUSIONS: The nanocomposite PENTA/UDMA with mixtures of Nanohydroxyapatite and titanium dioxide may be considerate as a mechanical toughened, also an option to modify shade qualities for dental aesthetic applications.
Asunto(s)
Durapatita , Rubiaceae , Cementos Dentales , Esmalte Dental , Estética Dental , Ensayo de Materiales , Metacrilatos , Poliuretanos , Propiedades de Superficie , TitanioRESUMEN
The skin wounds cause serious burden to healthcare systems. The lack of sterility of the innate barrier function of the skin facilitates the development of microbial communities within the wound environment especially in biofilm form. Since biofilm is difficult to eradicate, new treatments have been established, such as silver nanoparticles (AgNPs), which antimicrobial and anti-biofilm properties have been studied, nevertheless, their toxic effects are known too. Different concentrations of AgNPs stabilized with a biocompatible and thermo-reversible vehicle as hydrogel Pluronic F-127 were synthesized, those formulations presented interesting thermo-reversibility which could be used to apply on wounds. The formulations (Gel 62.5, 125, and 250â¯ppm of AgNPs) proposed in this study showed in vitro a total inhibition of clinical strains (Staphylococcus aureus and Pseudomonas aeruginosa) in planktonic form, as well as, anti-biofilm activity was archived with the formulation of Gel 250â¯ppm, a total inhibition of biofilm formation with mixed culture was registered in the first 30â¯min of biofilm growth; even more, the viability of human fibroblasts with all gels formulations was >95%, in contrast to silver sulfadiazine cream 1% which showed the highest cytotoxic effect. PF-127 gel with AgNPs could be a prophylactic treatment for skin wounds, because its activity in critical steps on biofilm formation.
Asunto(s)
Biopelículas/efectos de los fármacos , Citotoxinas , Hidrogeles , Nanopartículas del Metal , Poloxámero , Pseudomonas aeruginosa/fisiología , Plata , Piel/lesiones , Staphylococcus aureus/fisiología , Heridas y Lesiones/tratamiento farmacológico , Biopelículas/crecimiento & desarrollo , Citotoxinas/química , Citotoxinas/farmacología , Femenino , Fibroblastos/metabolismo , Fibroblastos/patología , Humanos , Hidrogeles/química , Hidrogeles/farmacología , Masculino , Nanopartículas del Metal/química , Nanopartículas del Metal/uso terapéutico , Poloxámero/química , Poloxámero/farmacología , Plata/química , Plata/farmacología , Piel/metabolismo , Piel/patología , Heridas y Lesiones/metabolismo , Heridas y Lesiones/patologíaRESUMEN
Here we report on the identification and applications of an aqueous 29-atom silver cluster stabilized with 12 lipoate ligands, i.e. Ag29(R-α-LA)12 or (29,12), wherein R-α-LA = R-α-lipoic acid, a natural dithiolate. Its uniformity is checked by HPLC-ESI-MS and analytical ultracentrifugation, which confirms its small dimension (~3 nm hydrodynamic diameter). For the first time, this cluster has been detected intact via electrospray ionization mass spectrometry, allowing one to confirm its composition, its [3-] charge-state, and the 8-electron shell configuration of its metallic silver core. Its electronic structure and bonding, including T-symmetry and profound chirality in the outer shell, have been analyzed by DFT quantum-chemical calculations, starting from the known structure of a nonaqueous homologue. The cluster is effective against Methicillin-Resistant Staphylococcus aureus bacteria (MRSA) at a minimum inhibitory concentration (MIC) of 0.6 mg-Ag/mL. A preformed Candida albicans fungal biofilm, impermeable to other antifungal agents, was also inhibited by aqueous solutions of this cluster, in a dose-response manner, with a half-maximal inhibitory concentration (IC50) of 0.94 mg-Ag/mL. Scanning electron micrographs showed the post-treatment ultrastructural changes on both MRSA and C. albicans that are characteristic of those displayed after treatment by larger silver nanoparticles.
RESUMEN
Solving the atomic structure of metallic clusters is fundamental to understanding their optical, electronic, and chemical properties. Herein we present the structure of the largest aqueous gold cluster, Au146(p-MBA)57 (p-MBA: para-mercaptobenzoic acid), solved by electron micro-diffraction (MicroED) to subatomic resolution (0.85 Å) and by X-ray diffraction at atomic resolution (1.3 Å). The 146 gold atoms may be decomposed into two constituent sets consisting of 119 core and 27 peripheral atoms. The core atoms are organized in a twinned FCC structure, whereas the surface gold atoms follow a C2 rotational symmetry about an axis bisecting the twinning plane. The protective layer of 57 p-MBAs fully encloses the cluster and comprises bridging, monomeric, and dimeric staple motifs. Au146(p-MBA)57 is the largest cluster observed exhibiting a bulk-like FCC structure as well as the smallest gold particle exhibiting a stacking fault.
RESUMEN
Detectors, photo-emitter, and other high order radiation devices work under the principle of directionality to enhance the power of emission/transmission in a particular direction. In order to understand such directionality, it is important to study their coupling mechanism of their active elements. In this work, we present a crystalline orientation analysis of ZnO nanorods grown epitaxially on the pentagonal faces of silver nanowires. The analysis of the crystalline orientation at the metal-semiconductor interface (ZnO/Ag) is performed with precession electron diffraction under assisted scanning mode. In addition, high resolution X-ray diffraction on a Bragg-Brentano configuration has been used to identify the crystalline phases of the arrangement between ZnO rods and silver nanowires. The work presented herein provides a fundamental knowledge to understand the metal-semiconductor behavior related to the receiving/transmitting mechanisms of ZnO/Ag nanoantennas.
RESUMEN
A MoS2(1-x) P(x) solid solution (x = 0 to 1) is formed by thermally annealing mixtures of MoS2 and red phosphorus. The effective and stable electrocatalyst for hydrogen evolution in acidic solution holds promise for replacing scarce and expensive platinum that is used in present catalyst systems. The high performance originates from the increased surface area and roughness of the solid solution.
Asunto(s)
Hidrógeno/química , Molibdeno/química , Fósforo/química , Azufre/química , Catálisis , Modelos Moleculares , Conformación Molecular , SolucionesRESUMEN
The objective of this study was to compare the properties of particles formed by nucleation and polymer stabilization (e.g. evaporative precipitation into aqueous solution (EPAS)) versus rapid freezing (e.g. spray freezing into liquid (SFL)). Powders formed by EPAS and SFL, composed of danazol and PVP K-15 in a 1:1 ratio, were characterized using X-ray powder diffraction, modulated differential scanning calorimetry (MDSC), contact angle determination, dissolution, scanning electron microscopy (SEM), environmental scanning electron microscopy (ESEM), BET specific surface area, and Z-contrast scanning transmission electron microscopy (STEM). Large differences in particle morphologies and properties were observed and explained in terms of the particle formation mechanisms. Both techniques produced amorphous powders with high T(g) and low contact angle values. However, STEM analysis showed highly porous bicontinuous nanostructured 30nm particles connected by narrow bridges for SFL versus aggregated 500 nm primary particles for EPAS. The combination of STEM and other characterization techniques indicates solid solutions were formed for the SFL powders consistent with rapid freezing. In contrast, the EPAS particle cores are enriched in hydrophobic API and the outer surface is enriched in the hydrophilic polymer, with less miscibility than in the SFL powders. Consequently, dissolution rates are faster for the SFL particles, although both techniques enhanced dissolution rates of the API.
Asunto(s)
Química Farmacéutica/métodos , Microscopía Electrónica de Rastreo/métodos , Polvos/química , Algoritmos , Disponibilidad Biológica , Rastreo Diferencial de Calorimetría , Química Farmacéutica/instrumentación , Excipientes , Liofilización , Tamaño de la Partícula , Soluciones , Propiedades de Superficie , Difracción de Rayos XRESUMEN
The interaction of nanoparticles with biomolecules and microorganisms is an expanding field of research. Within this field, an area that has been largely unexplored is the interaction of metal nanoparticles with viruses. In this work, we demonstrate that silver nanoparticles undergo a size-dependent interaction with HIV-1, with nanoparticles exclusively in the range of 1-10 nm attached to the virus. The regular spatial arrangement of the attached nanoparticles, the center-to-center distance between nanoparticles, and the fact that the exposed sulfur-bearing residues of the glycoprotein knobs would be attractive sites for nanoparticle interaction suggest that silver nanoparticles interact with the HIV-1 virus via preferential binding to the gp120 glycoprotein knobs. Due to this interaction, silver nanoparticles inhibit the virus from binding to host cells, as demonstrated in vitro.
RESUMEN
Silver nanoparticles offer a possible means of fighting antibacterial resistance. Most of their antibacterial properties are attributed to their silver ions. In the present work, we study the actions of positively charged silver nanoparticles against both methicillin-sensitive Staphylococcus aureus and methicillin-resistant Staphylococcus aureus. We use aberration-corrected transmission electron microscopy to examine the bactericidal effects of silver nanoparticles and the ultrastructural changes in bacteria that are induced by silver nanoparticles. The study revealed that our 1 nm average size silver nanoparticles induced thinning and permeabilization of the cell wall, destabilization of the peptidoglycan layer, and subsequent leakage of intracellular content, causing bacterial cell lysis. We hypothesize that positively charged silver nanoparticles bind to the negatively charged polyanionic backbones of teichoic acids and the related cell wall glycopolymers of bacteria as a first target, consequently stressing the structure and permeability of the cell wall. This hypothesis provides a major mechanism to explain the antibacterial effects of silver nanoparticles on Staphylococcus aureus. Future research should focus on defining the related molecular mechanisms and their importance to the antimicrobial activity of silver nanoparticles.