Preferred Orientation and Phase Distribution of Quasi-2D Perovskite for Bifunctional Light-Emitting Photodetectors.

In traditional optical wireless communication (OWC) systems, the simultaneous use of multiple sets of light-emitting diodes (LEDs) and photodetectors (PDs) increases the system complexity and instability. Here we report bifunctional light-emitting photodetectors (LEPDs) fabricated with quasi-2D perovskite (F-PEA)2Cs4Pb5I11Br5 as light-emitting/detecting layers for efficient, miniaturized, and intelligent bidirectional OWC. By simply changing the solvent composition of the precursor solution and using antisolvent engineering, we manipulated the crystal orientation and phase distribution of (F-PEA)2Cs4Pb5I11Br5, realizing high irradiance (4.36 µW cm-2) and a -3 dB refresh rate (0.21 MHz) of electroluminescence in LED mode as well as low noise (below 1 pA Hz-1/2) and high responsivity (0.1 A W-1) in PD mode. The rapid and accurate OWC process was demonstrated through interaction of LEPDs. We also demonstrated the high-fidelity compression and digitization of high-resolution (256 × 256 pixels) color images using the four-step phase shift method to realize intelligent encrypted image OWC.

Solvent-Reconstructed Interface That Enhances Light Out-Coupling in Quasi-Two-Dimensional Perovskite Light-Emitting Diodes.

Light management is critical to maximizing the external quantum efficiency of perovskite light-emitting diodes (PeLEDs), but strategies for enhancing light out-coupling are typically complex and expensive. Here, using a facile solvent treatment strategy, we create a layer of lithium fluoride (LiF) nanoislands that serve as a template to reconstruct the light-extracting interfaces for PeLEDs. The nanoisland interface rearranges the near-field light distribution in order to maximize the efficiency of internal light extraction. With the proper adjustment of the nanoisland size and distribution, we have achieved an optimal balance between charge injection and light out-coupling, resulting in bright, pure-red quasi-two-dimensional PeLEDs with a 21.8% peak external quantum efficiency.

Structures of the ADGRG2-Gs complex in apo and ligand-bound forms.

Adhesion G protein-coupled receptors are elusive in terms of their structural information and ligands. Here, we solved the cryogenic-electron microscopy (cryo-EM) structure of apo-ADGRG2, an essential membrane receptor for maintaining male fertility, in complex with a Gs trimer. Whereas the formations of two kinks were determinants of the active state, identification of a potential ligand-binding pocket in ADGRG2 facilitated the screening and identification of dehydroepiandrosterone (DHEA), dehydroepiandrosterone sulfate and deoxycorticosterone as potential ligands of ADGRG2. The cryo-EM structures of DHEA-ADGRG2-Gs provided interaction details for DHEA within the seven transmembrane domains of ADGRG2. Collectively, our data provide a structural basis for the activation and signaling of ADGRG2, as well as characterization of steroid hormones as ADGRG2 ligands, which might be used as useful tools for further functional studies of the orphan ADGRG2.

"All in one" nanoprobe Au-TTF-1 for target FL/CT bioimaging, machine learning technology and imaging-guided photothermal therapy against lung adenocarcinoma.

The accurate preoperative diagnosis and tracking of lung adenocarcinoma is hindered by non-targeting and diffusion of dyes used for marking tumors. Hence, there is an urgent need to develop a practical nanoprobe for tracing lung adenocarcinoma precisely even treating them noninvasively. Herein, Gold nanoclusters (AuNCs) conjugate with thyroid transcription factor-1 (TTF-1) antibody, then multifunctional nanoprobe Au-TTF-1 is designed and synthesized, which underscores the paramount importance of advancing the machine learning diagnosis and bioimaging-guided treatment of lung adenocarcinoma. Bright fluorescence (FL) and strong CT signal of Au-TTF-1 set the stage for tracking. Furthermore, the high specificity of TTF-1 antibody facilitates selective targeting of lung adenocarcinoma cells as compared to common lung epithelial cells, so machine learning software Lung adenocarcinoma auxiliary detection system was designed, which combined with Au-TTF-1 to assist the intelligent recognition of lung adenocarcinoma jointly. Besides, Au-TTF-1 not only contributes to intuitive and targeted visualization, but also guides the following noninvasive photothermal treatment. The boundaries of tumor are light up by Au-TTF-1 for navigation, it penetrates into tumor and implements noninvasive photothermal treatment, resulting in ablating tumors in vivo locally. Above all, Au-TTF-1 serves as a key platform for target bio-imaging navigation, machine learning diagnosis and synergistic PTT as a single nanoprobe, which demonstrates attractive performance on lung adenocarcinoma.

Efficacy of Daiwenjiu ointment on the treatment of cervical spondylosis with nerve root type caused by cold dampness obstruction.

OBJECTIVE: This study aimed to assess the clinical efficacy of Daiwenjiu ointment in the treatment of cervical spondylosis with cold dampness obstruction nerve root type. METHODS: A retrospective analysis was conducted on a cohort of 110 patients diagnosed with cervical spondylotic radiculopathy. Based on the treatment method, the patients were divided into two groups. The control group received electroacupuncture treatment, while the observation group received a combination of Daiwenjiu ointment and electroacupuncture treatment. The outcome measures included Japanese Orthopedic Association (JOA) scores for cervical spine function, Simplified McGill Pain Questionnaire (SF-MPQ) scores, and changes in serum inflammatory factors TNF-α and IL-1ß. RESULTS: Following treatment, the JOA score in the observation group increased from 9.45 ± 1.35 to 14.82 ± 1.29 after treatment, indicating better recovery of cervical spine function compared to the control group (p < 0.001). The SF-MPQ score in the observation group decreased to 18.25 ± 3.80 after treatment, while it remained at 30.20 ± 4.30 in the control group. This difference between the groups was statistically significant (p < 0.001). Furthermore, the observation group demonstrated a significant decrease in serum levels of TNF-α and IL-1ß after treatment compared to the control group (p < 0.001). CONCLUSION: Daiwenjiu ointment exhibits significant therapeutic effects in patients with cold dampness obstruction nerve root type cervical spondylosis. It effectively improves cervical function, reduces pain, and downregulates inflammatory cytokine levels.

Three-Dimensional Histological Electrophoresis for High-Throughput Cancer Margin Detection in Multiple Types of Tumor Specimens.

Accurate identification of tumor margins during cancer surgeries relies on a rapid detection technique that can perform high-throughput detection of multiple suspected tumor lesions at the same time. Unfortunately, the conventional histopathological analysis of frozen tissue sections, which is considered the gold standard, often demonstrates considerable variability, especially in many regions without adequate access to trained pathologists. Therefore, there is a clinical need for a multitumor-suitable complementary tool that can accurately and high-throughput assess tumor margins in every direction within the surgically resected tissue. We herein describe a high-throughput three-dimensional (3D) histological electrophoresis device that uses tumor-specific proteins to identify and contour tumor margins intraoperatively. Testing on seven cell-line xenograft models and human cervical cancer models (representing five types of tissues) demonstrated the high-throughput detection utility of this approach. We anticipate that the 3D histological electrophoresis device will improve the accuracy and efficiency of diagnosing a wide range of cancers.

Naked-Eye Readable Microarray for Rapid Profiling of Antibodies against Multiple SARS-CoV-2 Variants.

Novel high-throughput protein detection technologies are critically needed for population-based large-scale SARS-CoV-2 antibody detection as well as for monitoring quality and duration of immunity against virus variants. Current protein microarray techniques rely heavily on labeled transduction methods that require sophisticated instruments and complex operations, limiting their clinical potential, particularly for point-of-care (POC) applications. Here, we developed a label-free and naked-eye readable microarray (NRM) based on a thickness-sensing plasmon ruler, enabling antibody profiling within 30 min. The NRM chips provide 100% accuracy for neutralizing antibody detection by efficiently screening antigen types and experimental conditions and allow for the profiling of antibodies against multiple SARS-CoV-2 variants in clinical samples. We further established a flexible "barcode" NRM assay with a simple tape-based operation, enabling an effective smartphone-based readout and analysis. These results demonstrate new strategies for high-throughput protein detection and highlight the potential of novel protein microarray techniques for realistic clinical applications.

Enabling Carbonized Polymer Dots with Color-tunable Time-dependent Room Temperature Phosphorescence through Confining Carboxyl Dimer Association.

Developing a facile strategy to realize fine-tuning of phosphorescence color in time-dependent room temperature phosphorescence (RTP) materials is essential but both theoretically and practically rarely exploited. Through simultaneously confining carboxyl dimer association and isolated carboxyl into the particle via a simple hydrothermal treatment of polyacrylic acid, a dual-peak emission of red phosphorescence (645 nm) and green phosphorescence (550 nm) was observed from carbonized polymer dots (CPDs). The ratio of the two luminescent species can be well regulated by hydrochloric acid inhibiting the dissociation of carboxyl to promote hydrogen bond. Due to comparable but different lifetimes, color-tunable time-dependent RTP with color changing from yellow to green or orange to green were obtained. Based on the crosslinking enhanced emission effect, the phosphorescence visible time was even extended to 7 s through introducing polyethylenimide. This study not only proposes a novel and facile method for developing CPDs with color-tunable time-dependent RTP, but also provides a bran-new non-conjugated red phosphorescence unit and its definite structure.

Carbonized Polymer Dots Assemble in Proton-Conducting Channels to Enhance the Conductivity and Selectivity Simultaneously for High-Performance Fuel Cells.

Fabricating polymer electrolyte membranes (PEMs) simultaneously with high ion conductivity and selectivity has always been an ultimate goal in many membrane-integrated systems for energy conversion and storage. Constructing broader ion-conducting channels usually enables high-efficient ion conductivity while often bringing increased crossover of other ions or molecules simultaneously, resulting in decreased selectivity. Here, the ultra-small carbon dots (CDs) with the selective barriers are self-assembled within proton-conducting channels of PEMs through electrostatic interaction to enhance the proton conductivity and selectivity simultaneously. The functional CDs regulate the nanophase separation of PEMs and optimize the hydration proton network enabling higher-efficient proton transport. Meanwhile, the CDs within proton-conducting channels prevent fuel from permeating selectively due to their repelling and spatial hindrance against fuel molecules, resulting in highly enhanced selectivity. Benefiting from the improved conductivity and selectivity, the open-circuit voltage and maximum power density of the direct methanol fuel cell (DMFC) equipped with the hybrid membranes raised by 23% and 93%, respectively. This work brings new insight to optimize polymer membranes for efficient and selective transport of ions or small molecules, solving the trade-off of conductivity and selectivity.

Molecular Structure and Properties of Sulfur-Containing High Refractive Index Polymer Optical Materials.

High refractive index polymers (HRIPs) are widely used in lenses, waveguide, antireflective layer and encapsulators, especially the advanced fields of augmented/virtual reality (AR / VR) holographic technology and photoresist for chip manufacturing. In order to meet the needs of different applications, the development of HRIPs focuses not only on the increase in refractive index but also on the balance of other properties. Sulfur-containing high refractive index polymers have received extensive attention from researchers due to their excellent properties. In recent years, not only ultrahigh refractive index sulfur-containing polymers have been continuously developed, but also low dispersion, low birefringence, high transparency, good mechanical properties, and machinability have been studied. The design of HRIPs is generally based on formulas and existing experience. In fact, molecular structure and properties are closely related. Mastering the structure-property relationship helps researchers to develop high refractive index polymer materials with balanced properties. This review briefly introduces the preparation methods of sulfur-containing high refractive index polymers, and summarizes the structure-property relationship between the sulfur-containing molecular structure and optical properties, mechanical properties, thermal properties, etc. Finally, the important role of synergistic effect in the synthesis of HRIPs and the prospect of future research on HRIPs are proposed.

Carbon nanodots constructed by ginsenosides and their high inhibitory effect on neuroblastoma.

BACKGROUND: Neuroblastoma is one of the common extracranial tumors in children (infants to 2 years), accounting for 8 ~ 10% of all malignant tumors. Few special drugs have been used for clinical treatment currently. RESULTS: In this work, herbal extract ginsenosides were used to synthesize fluorescent ginsenosides carbon nanodots via a one-step hydrothermal method. At a low cocultured concentration (50 µg·mL- 1) of ginsenosides carbon nanodots, the inhibition rate and apoptosis rate of SH-SY5Y cells reached ~ 45.00% and ~ 59.66%. The in vivo experiments showed tumor volume and weight of mice in ginsenosides carbon nanodots group were ~ 49.81% and ~ 34.14% to mice in model group. Since ginsenosides were used as sole reactant, ginsenosides carbon nanodots showed low toxicity and good animal response. CONCLUSION: Low-cost ginsenosides carbon nanodots as a new type of nanomedicine with good curative effect and little toxicity show application prospects for clinical treatment of neuroblastoma. It is proposed a new design for nanomedicine based on bioactive carbon nanodots, which used natural bioactive molecules as sole source.

Fe-doped carbon dots: a novel biocompatible nanoplatform for multi-level cancer therapy.

BACKGROUND: Tumor treatment still remains a clinical challenge, requiring the development of biocompatible and efficient anti-tumor nanodrugs. Carbon dots (CDs) has become promising nanomedicines for cancer therapy due to its low cytotoxicity and easy customization. RESULTS: Herein, we introduced a novel type of "green" nanodrug for multi-level cancer therapy utilizing Fe-doped carbon dots (Fe-CDs) derived from iron nutrient supplement. With no requirement for target moieties or external stimuli, the sole intravenous administration of Fe-CDs demonstrated unexpected anti-tumor activity, completely suppressing tumor growth in mice. Continuous administration of Fe-CDs for several weeks showed no toxic effects in vivo, highlighting its exceptional biocompatibility. The as-synthesized Fe-CDs could selectively induce tumor cells apoptosis by BAX/Caspase 9/Caspase 3/PARP signal pathways and activate antitumoral macrophages by inhibiting the IL-10/Arg-1 axis, contributing to its significant tumor immunotherapy effect. Additionally, the epithelial-mesenchymal transition (EMT) process was inhibited under the treatment of Fe-CDs by MAPK/Snail pathways, indicating the capacity of Fe-CDs to inhibit tumor recurrence and metastasis. CONCLUSIONS: A three-level tumor treatment strategy from direct killing to activating immunity to inhibiting metastasis was achieved based on "green" Fe-CDs. Our findings reveal the broad clinical potential of Fe-CDs as a novel candidate for anti-tumor nanodrugs and nanoplatform.

Comparative analysis of the genetic diversity of the neutral microsatellite loci and second exon of the goat MHC-DQB1 gene.

This study compared and analyzed the genetic diversity and population structure of exon 2 of the DQB1 gene and 13 autosomal neutral microsatellite markers from 14 Chinese goat breeds to explore the potential evolutionary mechanism of the major histocompatibility complex (MHC). A total of 287 haplotypes were constructed from MHC-DQB1 exon 2 from 14 populations, and 82 nucleotide polymorphic sites (SNPs, 31.78%) and 172 heterozygous individuals (79.12%) were identified. The FST values of the microsatellites and MHC-DQB ranged between 0.01831-0.26907 and 0.00892-0.38871, respectively. Furthermore, 14 goat populations showed rich genetic diversity in the microsatellite loci and MHC-DQB1 exon 2. However, the population structure and phylogenetic relationship represented by the two markers were different. Positive selection and Tajima's D test results showed the occurrence of a diversified selection mechanism, which was primarily based on a positive and balancing selection in goat DQB. This study also found that the DQB sequences of bovines exhibited trans-species polymorphism (TSP) among species and families. In brief, this study indicated that positive and balancing selection played a major role in maintaining the genetic diversity of DQB, and TSP of MHC in bovines was common, which enhanced the understanding of the MHC evolution.

Organic Amine-Bridged Quasi-2D Perovskite/PbS Colloidal Quantum Dots Composites for High-Gain Near-Infrared Photodetectors.

Near-infrared (NIR) II detection at weak flux intensity is required in medical imaging and is especially urgent in light of the low quantum efficiency of NIR-II dyes. The low responsivity of traditional photodetectors in this region limits image quality. Here, we report a NIR-II photodetector with high gain based on perovskite coupled PbS colloidal quantum dots (CQDs). Tailoring the trap density of CQDs by designing surface ligands with dual functionality contributed to control over trap-induced charge-injection upon light illumination. As a result, a detector with high gain is realized, showing external quantum efficiency of 1260% at 1200 nm and achieving the lowest detectable light intensity, that is, as low as 0.67 pW cm-2 with a linear dynamic range of 200 dB. Devices maintain over 90% of responsivity after 150 days of storage. We acquired images of a butterfly wing, showing the skeleton texture with a maximum spatial resolution of 3.9 lp/mm.

Thickness-Sensing Sandwiched Plasmonic Biosensors Enable Label-Free Naked-Eye Antibody Quantification.

Clinical serology assays for detecting the antibodies of the virus are time-consuming, are less sensitive/selective, or rely on sophisticated detection instruments. Here, we develop a sandwiched plasmonic biosensor (SPB) for supersensitive thickness-sensing via utilizing the distance-dependent electromagnetic coupling in sandwiched plasmonic nanostructures. SPBs quantitatively amplify the thickness changes on the nanoscale range (sensitivity: ∼2% nm-1) into macroscopically visible signals, thereby enabling the rapid, label-free, and naked-eye detection of targeted biomolecular species (via the thickness change caused by immunobinding events). As a proof of concept, this assay affords a broad dynamic range (7 orders of magnitude) and a low LOD (∼0.3 pM), allowing for the extremely accurate SARS-CoV-2 antibody quantification (sensitivity/specificity: 100%/∼99%, with a portable optical fiber device). This strategy is suitable for high-throughput multiplexed detection and smartphone-based sensing at the point-of-care, which can be expanded for various sensing applications beyond the fields of viral infections and vaccination.

Low Bandgap 2D Perovskite Single Crystal with Anomalous-large Charges/ions Collection Ratio for Ultra-sensitive and Stable X-ray Detectors.

The low-dimensional halide perovskites have attracted increasing attention due to their improved moisture stability, reduced defects, and suppressed ions migration in many optoelectronic devices such as solar cells, light-emitting diodes, X-ray detectors, and so on. However, they are still limited by their large band gap and short charge carriers' diffusion length. Here, we demonstrate that the introduction of metal ions into organic interlayers of two-dimensional (2D) perovskite by cross-linking the copper paddle-wheel cluster-based lead bromide ([Cu(O2 C-(CH2 )3 -NH3 )2 ]PbBr4 ) perovskite single crystals with coordination bonds can not only significantly reduce the perovskite band gap to 0.96 eV to boost the X-ray induced charge carriers, but can also selectively improve the charge carriers' transport along the out-of-plane direction and blocking the ions motion paths. The [Cu(O2 C-(CH2 )3 -NH3 )2 ]PbBr4 single-crystal device can reach a record charges/ions collection ratio of 1.69×1018 ±4.7 % µGyair -1 s, and exhibit a large sensitivity of 1.14×105 ±7% µC Gyair -1 cm-2 with the lowest detectable dose rate of 56 nGyair s-1 under 120 keV X-rays irradiation. In addition, [Cu(O2 C-(CH2 )3 -NH3 )2 ]PbBr4 single-crystal detector exposed to the air without any encapsulation shows excellent X-ray imaging capability with long-term operational stability without any attenuation of 120 days.

Perovskite Dimensional Evolution Through Cations Engineering to Tailor the Detection Limit in Hard X-ray Response.

Halide perovskites with various compositions are potential candidates in low-dosage X-ray detection due to their large sensitivity and tunable optoelectronic properties. Here, cations engineering induced dimensional evolution of halide perovskites between 0D, 2D, and 3D is reported. Centimeter-sized 2D lead-free perovskite single-crystal of 4-fluorophenethylammonium antimony iodide (FPEA3 SbI6 ) is synthesized. In contrast to the 0D phenethylammonium antimony iodide (PEA3 Sb2 I9 ), face-shared [Sb2 I9 ]3- of the bi-octahedral structure of PEA3 Sb2 I9 is split into corner-shared [SbI6 ]3- by intermolecular interactions and steric hindrance of FPEA+ ions in 2D FPEA3 SbI6 . Two Sb3+ ions share three octahedral [SbI6 ]3- , leaving one-third of Sb3+ vacancies in the framework of FPEA3 SbI6 . Furthermore, Sn2+ ions can be filled into the vacancies to form continuous 2D frameworks to tune the anisotropic conductivity and device sensitivity to hard X-rays. The dimensional evolution of perovskite single-crystals from 3D to 2D or 0D to 2D maximizes the signal/noise ratio to facilize the adjustability of detection limit in hard X-ray detection, which is determined by both device sensitivity and device noise current. A record low detection limit coefficient of 0.65 is achieved in the 2D FPEA3 SbSn0.5 I7 single-crystal sample, which results from selective charges collection over mobile ions/noise current in the 2D perovskite structure.

High-precision magnetorheological finishing based on robot by measuring and compensating trajectory error.

The 6-DOF industrial robot has wide application prospects in the field of optical manufacturing because of its high degrees of freedom, low cost, and high space utilisation. However, the low trajectory accuracy of robots will affect the manufacturing accuracy of optical components when the robots and magnetorheological finishing (MRF) are combined. In this study, aiming at the problem of the diversity of trajectory error sources of robot-MRF, a continuous high-precision spatial dynamic trajectory error measurement system was established to measure the trajectory error accurately, and a step-by-step and multistage iterations trajectory error compensation method based on spatial similarity was established to obtain a high-precision trajectory. The experimental results show that compared with the common model calibration method and general non-model calibration method, this trajectory error compensation method can achieve accurate compensation of the trajectory error of the robot-MRF, and the trajectory accuracy of the Z-axis is improved from PV > 0.2 mm to PV < 0.1 mm. Furthermore, the finishing accuracy of the plane mirror from 0.066λ to 0.016λ RMS and the finishing accuracy of the spherical mirror from 0.184λ RMS to 0.013λ RMS using the compensated robot-MRF prove that the robot-MRF has the ability of high-precision polishing. This promotes the application of industrial robots in the field of optical manufacturing and lays the foundation for intelligent optical manufacturing.

Phosphorus and Nitrogen Codoped Carbonized Polymer Dots with Multicolor Room Temperature Phosphorescence for Anticounterfeiting Painting.

Visible spectral afterglow materials offer unprecedented potential for a myriad of applications due to their long luminescence characteristics, but it is still insufficient to prepare matrix-free materials with multicolor afterglow including the blue color. In this study, we successfully developed phosphorus and nitrogen codoped carbonized polymer dots (CPDs) with multicolor room temperature phosphorescence (RTP) including the blue color by microwave-assisted chemical reactions under different reaction time. After ceasing UV light, all four prepared CPDs were able to emit vivid RTP with a maximum absolute phosphorescence quantum yield (QY) of 59.41% and a maximum lifetime of about 1 s (yellow CPDs). With the increase of microwave reaction time, the RTP color of CPDs showed a gradual blue shift from yellow to blue. The reason why the RTP color of CPDs showed a gradual blue shift was the decrease of C═O units as the extension of the microwave reaction time. In view of their fascinating multicolor RTP properties, potential applications of the four CPDs in the field of anticounterfeiting painting were presented and demonstrated. This work would inspire other researchers to enrich multicolor afterglow materials.

Chemical Fuel Mediated Self-Regulatory Polymer Brushes for Autonomous Fluorescence Modulator and Wettability Switcher.

Synthetic systems of nonequilibrium self-assembly have made considerable progress; however, the achievement of innovative materials with self-regulated functions analogous to living systems remains a grand challenge. Herein, a versatile nonequilibrium system of polymer brushes with spatiotemporally programmable properties and functions driven by chemical fuels is reported. By combining a responsive polymer with an autonomous pH regulator, the polymer brushes self-regulate their swelling and deswelling process with tunable lifetimes. By using patterned copolymer brushes with pH-responsive fluorescence moiety, an autonomous fluorescence modulator is created that self-regulates its fluorescence in spatiotemporally programmable fashion driven by a chemical or an enzymatic reaction. Furthermore, a self-regulated wettability switcher of polymer brushes both in air and in an aqueous solution is implemented. The methodology and results in the work provide a useful avenue into the exploration of nonequilibrium synthetic materials with programmable functions and would accelerate the transformative developments of nonequilibrium materials and systems in practical applications.