Gordonibacter faecis sp. nov., producing urolithin C from ellagic acid, isolated from feces of healthy Korean subjects.

A Gram-stain-positive, anaerobic, motile, and short rod-shaped bacterium, designated KGMB12511T, was isolated from the feces of healthy Koreansubjects. Phylogenetic analysis based on the 16S rRNA gene sequence showed that strain KGMB12511T was closely related to Gordonibacter pamelaeae 7-10-1-bT (95.2%). The draft genome of KGMB12511T comprised 33 contigs and 2,744 protein-coding genes. The DNA G + C content was 59.9% based on whole-genome sequences. The major cellular fatty acids (>10%) of strain KGMB12511T were C18:1 cis9, C18:1 cis9 DMA (dimethylacetal), and C16:0 DMA. The predominant polar lipids included a diphosphatydilglycerol, four glycolipids, and an unidentified phospholipid. The major respiratory quinones were menaquinone 6 (MK-6) and monomethylmenaquinone 6 (MMK-6). Furthermore, HPLC analysis demonstrated the ability of strain KGMB12511T to convert ellagic acid into urolithin. Based on a comprehensive analysis of phenotypic, chemotaxonomic, and phylogenetic data, strain KGMB12511T represents a novel species in the genus Gordonibacter. The type strain is KGMB12511T (= KCTC 25343T = NBRC 116190T).

Gastric microbiome signature for predicting metachronous recurrence after endoscopic resection of gastric neoplasm.

BACKGROUND: Changes in gastric microbiome are associated with gastric carcinogenesis. Studies on the association between gastric mucosa-associated gastric microbiome (MAM) and metachronous gastric cancer are limited. This study aimed to identify gastric MAM as a predictive factor for metachronous recurrence following endoscopic resection of gastric neoplasms. METHOD: Microbiome analyses were conducted for 81 patients in a prospective cohort to investigate surrogate markers to predict metachronous recurrence. Gastric MAM in non-cancerous corporal biopsy specimens was evaluated using Illumina MiSeq platform targeting 16S ribosomal DNA. RESULTS: Over a median follow-up duration of 53.8 months, 16 metachronous gastric neoplasms developed. Baseline gastric MAM varied with Helicobacter pylori infection status, but was unaffected by initial pathologic diagnosis, presence of atrophic gastritis, intestinal metaplasia, or synchronous lesions. The group with metachronous recurrence did not exhibit distinct phylogenetic diversity compared with the group devoid of recurrence but showed significant difference in ß-diversity. The study population could be classified into two distinct gastrotypes based on baseline gastric MAM: gastrotype 1, Helicobacter-abundant; gastrotype 2: Akkermansia-abundant. Patients in gastrotype 2 showed higher risk of metachronous recurrence than gastrotype (Cox proportional hazard analysis, adjusted hazard ratio [95% confidence interval]: 5.10 [1.09-23.79]). CONCLUSIONS: Gastric cancer patients can be classified into two distinct gastrotype groups by their MAM profiles, which were associated with different risk of metachronous recurrence.

Sex-dependent different clinicopathological characterization of Epstein-Barr virus-associated gastric carcinoma: a large-scale study.

BACKGROUND: Epstein-Barr virus (EBV)-associated gastric cancer (EBVaGC) has been reported to account for approximately 5-16% of all GCs with good prognosis compared to EBV-negative GC. We evaluated the clinicopathological characteristics of EBVaGC including survival rate in South Korea. METHODS: A total of 4,587 patients with GC who underwent EBV in situ hybridization (EBV-ISH) were prospectively enrolled at the Seoul National University Bundang Hospital from 2003 to 2021. Age, sex, smoking status, cancer type and stage, tumor size and location, histological type, molecular features and survival information were analyzed. RESULTS: A total of 456 patients with GC (9.9%) were positive for EBV. The EBVaGC group displayed a higher proportion of males (P < 0.001), a predominant presence in the proximal stomach (P < 0.001), a higher proportion of undifferentiated cancer (P < 0.001), and a lower cancer stage (P = 0.004) than the EBV-negative group. Cox multivariate analyses revealed age (hazard ratio [HR] = 1.025, P < 0.001), tumor size (HR = 1.109, P < 0.001), and cancer stage (stage2 HR = 4.761, P < 0.001; stage3 HR = 13.286, P < 0.001; stage4 HR = 42.528, P < 0.001) as significant risk factors for GC-specific mortality, whereas EBV positivity was inversely correlated (HR = 0.620, P = 0.022). Furthermore, the EBVaGC group displayed statistically significant survival advantages over the EBV-negative cancer group in terms of both overall (P = 0.021) and GC-specific survival (P = 0.007) on the Kaplan-Meier survival curve. However, this effect was evident only in males. CONCLUSIONS: EBVaGC patients showed better prognoses despite their association with proximal location and poorly differentiated histology in male, probably due to the difference in immunity between males and females.

Effectiveness and Tolerability of Methotrexate Combined with Biologics in Patients with Crohn's Disease: A Multicenter Observational Study.

BACKGROUND: Methotrexate (MTX) combination therapy with biological agents has gained increasing interest. Here, we assessed the efficacy and tolerability of the MTX combination therapy in patients with Crohn's disease (CD). METHODS: We performed a multicenter observational study with 185 patients with CD with MTX and biologics combination therapy; the patients were recruited from three IBD Clinics in Korea. We evaluated the outcomes of the MTX combination therapy and examined the predictive factors of clinical and endoscopic remission. RESULTS: MTX was administered orally to 62.7% of patients; the mean dose was 15.5 mg per week, and the mean treatment duration was 36 months. Of the 169 patients treated with MTX combination therapy for over 6 months, the steroid-free clinical remission rates were 34.3%, 26.0%, 29.8%, and 32.7% at 4, 12, 18, and 24 months, respectively. Previous thiopurine use was a significant negatively associated independent factor (p < 0.001), and a higher dose of MTX (≥ 15 mg/week) was a positively associated independent factor of steroid-free clinical remission (p = 0.035). Ninety-six patients underwent follow-up endoscopy after 28 months, and 36 (37.5%) achieved endoscopic remission. Longer disease duration (p = 0.006), ileocolonic type of Montreal location (p = 0.036), and baseline C-reactive protein (CRP) level of more than 5 mg/L (p = 0.035) were significant negatively associated independent factors and a higher dose of MTX (≥ 15 mg/week) was a positively associated independent factor of endoscopic remission (p = 0.037). CONCLUSIONS: MTX combination therapy with biologics was effective and tolerable in patients with CD.

Phocaeicola acetigenes sp. nov., producing acetic acid and iso-butyric acid, isolated faeces from a healthy human.

An obligately anaerobic, non-motile, Gram-stain-negative, and rod-shaped strain KGMB11183T was isolated from the feces of healthy Koreans. The growth of strain KGMB11183T occurred at 30-45 °C (optimum 37 °C), at pH 6-9 (optimum pH 7), and in the presence of 0-0.5% NaCl (optimum 0%). Strain KGMB11183T showed 16S rRNA gene sequence similarities of 95.4% and 94.2% to the closest recognized species, Phocaeicola plebeius M12T, and Phocaeicola faecicola AGMB03916T. Phylogenetic analysis showed that strain KGMB11183T is a member of the genus Phocaeiocla. The major end products of fermentation are acetic acid and isobutyric acid. The major cellular fatty acids (> 10%) of this isolate were C18:1 cis 9, anteiso-C15:0, and summed feature 11 (iso-C17:0 3-OH and/or C18:2 DMA). The assembled draft genome sequences of strain KGMB11183T consisted of 3,215,271 bp with a DNA G + C content of 41.4%. According to genomic analysis, strain KGMB11183T has a number of genes that produce acetic acid. The genome of strain KGMB11183T encoded the starch utilization system (Sus) operon, SusCDEF suggesting that strain uses many complex polysaccharides that cannot be digested by humans. Based on the physiological, chemotaxonomic, phenotypic, and phylogenetic data, strain KGMB11183T is regarded a novel species of the genus Phocaeicola. The type strain is KGMB11183T (= KCTC 25284T = JCM 35696T).

Flexural strength and translucency of barium-silicate-filled resin nanoceramics for additive manufacturing.

OBJECTIVE: This in vitro study aimed to evaluate the flexural strength (FS) and translucency parameter (TP) of resin nanoceramics (RNCs) with barium silicate for additive manufacturing. MATERIALS AND METHODS: An RNC slurry was prepared by mixing a barium silicate filler and resin monomer. For the FS tests, specimens with three filler contents (0, 50, and 63 wt%) were designed according to ISO6872 for dental ceramics and ISO10477 for dental polymers. These specimens were then formed into discs with thicknesses of 1 and 2 mm for TP measurement. RESULTS: In the specimens prepared according to ISO6872, the FS increased significantly depending on the filler content. However, in the case of ISO10477, there was no significant difference between the FSs of the specimens with 0 and 50 wt% filler contents. The increase in thickness affected translucency, and the lowest translucency was obtained at a filler content of 63 wt%. The filler distribution was dense in the specimen with 63 wt% filler and uniform but relatively sparse in the specimen with 50 wt% filler. More voids were observed in the specimen with 63 wt% filler. The thickness and filler content of the specimen affected its TP. The TP of the specimen with 63 wt% filler was similar to that of human enamel. CONCLUSION: The FS was significantly higher at a filler content of 63 wt%. The lowest translucency was obtained at a filler content of 63 wt% for all tested thicknesses. CLINICAL SIGNIFICANCE: Increasing the filler content was advantageous for the mechanical properties of the RNCs. A high filler content led to low translucency in the RNCs. Therefore, the esthetics of human teeth can be reproduced if layering according to the filler content is performed in areas where esthetic characteristics are required.

Evaluation of shear bond strength based on substructure materials and ceramic veneering techniques.

PURPOSE: Bilayered restorations have both the strength of the substructure material and the esthetics of the veneer material; however, they should have appropriate bonding between the two materials. This study aimed to evaluate the shear bond strength (SBS) according to the substructure material and veneering technique used in bilayered restorations. MATERIALS AND METHODS: The experimental group was divided into four groups (n = 15 per group) based on the substructure materials (cobalt-chromium [Co-Cr] alloy and 3 mol% yttrium-stabilized tetragonal zirconia polycrystal [3Y-TZP]) and veneering techniques (pressing and layering). Veneering was performed with disk shape (diameter: 5 mm, height: 2 mm) on a substructure using each veneering technique. Shear stress was applied to the interface of the substructure and the veneering ceramic using a universal testing machine. The shear bond strength, according to the substructure and veneering technique, was analyzed using a two-way analysis of variance with a post-hoc Tukey's honestly significant difference test. The failure mode was observed, and the surface was analyzed using a scanning electron microscope and energy-dispersive spectroscopy. RESULTS: The shSBS of the Co-Cr alloy and 3Y-TZP substructure was not different (p > 0.05); however, the pressing technique showed a higher SBS than the layering technique (p < 0.05). The SBS did not differ depending on the veneering technique in the Co-Cr alloys (p > 0.05), whereas the SBS in the pressing technique was higher than that in the layering technique for 3Y-TZP (p < 0.05). In the layering technique, the Co-Cr alloy showed a higher SBS than 3Y-TZP (p < 0.05). In the failure mode, mixed failure occurred most frequently in all groups. Extensive elemental interdiffusion was observed through the opaque layer in the Co-Cr alloy, regardless of the veneering technique. In 3Y-TZP, a wider range of elemental interdiffusion was observed in the pressing technique than in the layering technique. CONCLUSIONS: In bilayered restorations with a 3Y-TZP substructure, the pressing technique yielded higher bonding strength than layering. Using the layering technique, 3Y-TZP showed a lower SBS than the Co-Cr alloy. In bilayered restorations using 3Y-TZP as a substructure, the veneering technique and thermal compatibility of the materials must be considered.

Preventive effect of Helicobacter pylori eradication on the coronary heart diseases depending on age and sex with a median follow-up of 51 months.

BACKGROUND: The association between Helicobacter pylori (HP) infection and coronary heart disease (CHD) is controversial. This study aimed to investigate the effect of H. pylori eradication on CHD, especially in terms of age and sex. MATERIALS AND METHODS: From May 2003 to March 2022, 4765 subjects with H. pylori infection and without CHD (median follow-up: 51 months) were prospectively enrolled. The participants were categorized into two groups: H. pylori eradication and H. pylori non-eradication. After propensity-score matching (PSM), the effect of H. pylori eradication on CHD was analyzed using Cox proportional hazards. RESULTS: There were no significant differences in age, sex, alcohol consumption, smoking habits, history of diabetes, hypertension, and dyslipidemia, and aspirin intake between the eradication and non-eradication groups (3783 vs. 982) before and after PSM. Multivariate analysis after PSM showed that H. pylori eradication (HR: 0.489, CI: 0.314-0.761, p = .002), age (HR: 1.027, CI: 1.007-1.047, p = .007), hypertension (HR: 2.133, CI: 1.337-3.404, p = 001), dyslipidemia (HR: 1.758, CI: 1.086-2.848, p = .022), and aspirin intake (HR: 2.508, CI: 1.566-4.017, p < .001) were associated with CHD development. H. pylori eradication prevented CHD in males ≤65 years (HR: 0.133, CI: 0.039-0.455, p = .001), but not in those aged >65 years (p = .078) (p for interaction = .022). In contrast, females aged >65 years (HR: 0.260, CI: 0.110-0.615, p = .002) were protected by H. pylori eradication and not those ≤65 years (p = .485) (p for interaction = .003). This preventive effect increased more after PSM, particularly in males ≤65 years and females >65 years. CONCLUSIONS: H. pylori eradication prevented CHD and this effect was different depending on age and sex.

Comparison of the Pharmacokinetics of CT-P13 Between Crohn's Disease and Ulcerative Colitis.

BACKGROUND: We aimed to compare trough infliximab levels and the development of antidrug antibody (ADA) for 1 year between Crohn's disease (CD) and ulcerative colitis (UC) patients who were biologic-naive, and to evaluate their impact on clinical outcomes. METHODS: This was a prospective, multicenter, observational study. Biologic-naive patients with moderate to severe CD or UC who started CT-P13, an infliximab biosimilar, therapy were enrolled. Trough drug and ADA levels were measured periodically for 1 year after CT-P13 initiation. RESULTS: A total of 267 patients who received CT-P13 treatment were included (CD 168, UC 99). The rates of clinical remission (72% vs. 32.3%, P <0.001) at week 54 were significantly higher in CD than in UC. The median trough drug level (µg/mL) was significantly higher in CD than in UC up to week 14 (week 2, 18.7 vs. 14.7, P <0.001; week 6, 12.5 vs. 8.6, P <0.001; week 14, 3.4 vs. 2.5, P =0.001). The median ADA level (AU/mL) was significantly lower in CD than in UC at week 2 (6.3 vs. 6.5, P =0.046), week 30 (7.9 vs. 11.8, P =0.007), and week 54 (9.3 vs. 12.3, P =0.032). Development of ADA at week 2 [adjusted odds ratio (aOR)=0.15, P =0.026], initial C-reactive protein level (aOR=0.87, P =0.032), and CD over UC (aOR=1.92, P <0.001) were independent predictors of clinical remission at week 54. CONCLUSION: Infliximab shows more favorable pharmacokinetics, including high drug trough and low ADA levels, in CD than in UC, which might result in better clinical outcomes for 1-year infliximab treatment in CD patients.

Atopic dermatitis is associated with the clinical course of inflammatory bowel disease.

OBJECTIVES: There are a few studies about the relationship between inflammatory bowel disease (IBD) and atopic dermatitis (AD). It is implied that both diseases have common pathophysiologic mechanisms and can affect each other. However, little information is available on the effect of AD on the clinical course of patients with IBD. METHODS: This is a multi-center, retrospective, observational study. We define AD as a chronic eczematoid dermatosis diagnosed by dermatologists. Patients with concurrent IBD and AD were defined as a case group. Age, gender, and IBD subtype-matched patients without AD were included as a reference group. RESULTS: The numbers of patients in the case and reference groups were 61 and 122 respectively. There was a significantly shorter biologics-free survival in the case group than that in the reference group according to the multivariable-adjusted Cox regression analysis with the onset age, disease duration, smoking status, use of steroid, use of immunomodulator, initial C-reactive protein, initial erythrocyte sedimentation rate, presence of other allergic diseases and initial disease severity [hazard ratio (HR) 1.828, 95% confidence interval (CI) 1.022-3.271, p = .042]. The trend was consistent in the subgroup analysis with ulcerative colitis (HR 3.498, 95% CI 1.066-11.481, p = .039), but not with Crohn's disease (HR 1.542, 95% CI 0.720-3.301, p = .265). CONCLUSIONS: AD showed a significant effect on the biologics-free survival of patients with IBD and especially the UC subtype. Further mechanistic research is required to elucidate the pathogenesis of AD on the clinical course of IBD.

Clinical importance of weight gain and associated factors in patients with moderate to severe ulcerative colitis: results from the MOSAIK cohort in Korea.

BACKGROUND: Many patients with ulcerative colitis (UC) gain weight after treatment. However, the clinical significance of weight gain in these patients remains unclear. This study aimed to evaluate body weight changes after treatment in patients newly diagnosed with moderate-to-severe UC and their effects on patients' prognosis. METHODS: The change in weight between diagnosis and 1 year after treatment in 212 patients enrolled in the MOSAIK cohort (mean age, 40 years; males, 60%) was analyzed. Significant weight gain was defined as a weight increase of ≥ 5% from the baseline at 1 year. Factors associated with significant weight gain and the effect of significant weight gain on the risk of major adverse outcomes (clinical relapse, hospitalization, and new use of steroids or biologics) during a follow-up period of 20 months were evaluated. RESULTS: Mean weight gain at 1 year was 1.7 ± 4.2 kg. The proportion of overweight/obese patients increased by 9.0% from 37.9% to 46.9%. Thirty-two percent had significant weight gain; extensive colitis at diagnosis was the only factor associated with significant weight gain (odds ratio 6.5, 95% confidence interval 1.4-31.0, p = 0.006). In multivariable analysis, significant weight gain was not associated with the risk of major adverse outcomes. Weight loss symptoms at diagnosis were associated with an increased risk for new steroid use after 1 year. CONCLUSIONS: Approximately one-third of patients with moderate-to-severe UC had significant weight gain after 1 year of treatment. However, significant weight gain was not associated with the patient's prognosis.

Fatigue resistance of anterior monolithic crowns produced from CAD-CAM materials: An in vitro study.

STATEMENT OF PROBLEM: Lithium disilicate and 5 mol% yttria partially stabilized zirconia (5Y-PSZ) are commonly used for anterior restorations. However, studies comparing the durability of 5Y-PSZ and lithium disilicates are sparse. PURPOSE: The purpose of this in vitro study was to investigate the fracture load of anterior monolithic crowns made of 2 lithium disilicates and a 5Y-PSZ under dynamic loading. MATERIAL AND METHODS: Titanium abutments of the maxillary incisors were prepared (N=48, 8 for each group). Monolithic anterior crowns were made from the lithium disilicates (e.max CAD, Rosetta SM) and 5Y-PSZ (Katana UTML). After cementation, the specimens were stored in water for 24 hours and then thermocycled 10 000 times. Dynamic loading (70 N, 200 000 cycles, 1 Hz) was applied to half the specimens. The fracture load was measured by using a universal testing machine. The fracture patterns were analyzed and fractography applied. Two-way ANOVA and the Fisher exact test were used for statistical analysis (α=.05). RESULTS: The material and dynamic loading affected the fracture load of the anterior monolithic crowns (P<.05). However, there was no interaction between the material and the dynamic loading (P=.079). Both lithium disilicates had higher fracture loads than 5Y-PSZ (P<.05). The fracture load of each specimen was reduced after dynamic loading (P<.05). Lithium disilicate showed marginal and bulk fractures, and 5Y-PSZ presented catastrophic fractures (P<.001). CONCLUSIONS: 5Y-PSZ materials with large grains and low flexural strength may be less resistant to fractures under dynamic loading than lithium disilicates.

Degree of conversion of light-polymerized composite resin in implant prosthesis screw access opening.

PURPOSE: The mechanical and physical properties of implant screw access opening deteriorate if composite resin is not polymerized properly. Therefore, this study aimed to analyze the effect of using composite resin in implant access opening on the degree of conversion (DC). MATERIALS AND METHODS: Two prosthetic materials (Co-Cr and zirconia), two types of composite resin (low and high viscosity), two light-cured resin depths (2 and 3 mm), and two polymerization methods (max-mode 10 s and mid-mode 20 s: 16 and 22 J/cm2 , respectively) were considered (n = 192). The DC of the polymerized composite resin was measured through Fourier-transform infrared spectroscopy. The top and bottom surfaces of the polymerized composite resin body were observed through scanning electron microscopy. Multiple linear regression analysis and analysis of variance were used to identify significant differences in DC (α = 0.05). RESULTS: The DC was lower when the low-viscosity composite resin (ß = -0.431), light-polymerized resin depth of 2 mm (ß = -0.430), zirconia prosthesis (ß = -0.191), and mid-mode polymerization method (ß = -0.164) were used. The resin type, depth of resin to be light-cured, prosthesis material, and polymerization method had an effect on the DC. CONCLUSIONS: Low-viscosity composite resin should be polymerized at a low irradiance and long polymerization time (such that the light-cured resin depth does not exceed 2 mm) to ensure proper composite resin polymerization in implant screw access opening.

Tensile bond strength of CAD-CAM all ceramic crowns before and after thermomechanical aging.

PURPOSE: The purpose of this in vitro study was to compare the tensile bond strength (TBS) of resin nanoceramics (RNC), zirconia, and lithium disilicate (LS2) restorations cemented to titanium abutments before and after thermomechanical aging. MATERIALS AND METHODS: Twelve specimens per group were fabricated to determine the TBS between a titanium abutment and four types of crown materials (2 RNCs, LS2, and translucent zirconia crowns for the maxillary molar). After milling, the abutments and crowns were cemented with resin cement after air-particle abrasion. In addition, thermomechanical aging (200,000 cycles, 50 N, 2 Hz) was applied to half of the specimens by using a mastication simulator. TBS was measured by using a universal testing machine. The interface between the crown and the cement was observed by using scanning electron microscopy (SEM). Two-way ANOVA was performed to analyze the effects of crown materials and thermomechanical aging. Failure-mode and interface analyses were also conducted. RESULTS: After thermomechanical aging, the TBS decreased in the LS2 specimens and increased in RNCs (p < 0.001). The ratio of mixed failure and debonding with the hole-sealing resin increased in the RNC group. SEM images showed the reduced gap between the crown and the resin cement after thermomechanical aging in the RNC group. CONCLUSIONS: Differences in TBS were affected by the crown materials after thermomechanical aging. After thermomechanical aging, the RNC crowns showed increased TBS, whereas LS2 and zirconia crowns exhibited decreased or similar TBS.

Bacteroides humanifaecis sp. nov., isolated from faeces of healthy Korean.

Two obligately anaerobic, Gram-stain-negative, non-motile, non-spore-forming and short rod shaped bacteria, designated KGMB07931T and KGMB10229, were isolated from faeces of two Korean persons. Phylogenetic analysis based on 16S rRNA gene sequences revealed that strains KGMB07931T and KGMB10229 were very similar to each other (99.9%) and grouped within the genus Bacteroides, displaying the highest similarity with Bacteroides uniformis ATCC 8492T (97.5%), Bacteroides rodentium JCM 16496T (96.6%), and Bacteroides fluxus YIT 12057T (94.5%). Both strains grew optimally at 37 °C and pH 7.5 in the presence of 0.5% (w/v) NaCl. The complete genome of KGMB07931T comprises 3,335 protein-coding genes with a total of 4,240,638 bp and an average G + C content of 46.3 mol%. The major fatty acids were C18:1 cis9, anteiso-C15:0, iso-C15:0, and Summed Feature 11 (iso-C17:0 3OH and/or C18:2 DMA); the predominant respiratory quinones were MK-9 and MK-10; the major fermentation end products were acetate and isobutyrate. The genome of strain KGMB07931T encoded the starch utilization system (Sus) operon, susABCDEFG, suggesting that this strain uses many complex polysaccharides that cannot be digested by humans. Based on polyphasic taxonomic data, strains KGMB07931T and KGMB10229 represent a novel species within the genus Bacteroides, for which the name Bacteroides humanifaecis sp. nov. is proposed. The type strain is KGMB07931T (= KCTC 25160T = NBRC 115005T).

Total polyp number may be more important than size and histology of polyps for prediction of metachronous high-risk colorectal neoplasms.

BACKGROUND: To evaluate whether the risk of metachronous high-risk colorectal neoplasm (HR-CRN) differs according to the indication for surveillance colonoscopy. METHODS: Patients who underwent polypectomy or endoscopic resection of colorectal neoplasms were enrolled and classified into three groups according to the indication for surveillance colonoscopy: advanced colorectal neoplasm (ACRN: adenoma ≥ 10 mm, adenoma with high-degree dysplasia and/or villous component), advanced serrated polyps (ASP: hyperplastic polyp or sessile serrated lesion ≥ 10 mm, traditional serrated polyp), and high-risk polyps (HRP: 3 or more adenomas or serrated polyps). The primary outcome was the development of metachronous HR-CRN, defined as ACRN, ASP, or HRP at the first follow-up colonoscopy. RESULTS: In total, 367 patients were enrolled (ACRN group: N = 264; ASP group: N = 33; HRP group: N = 70). Among the 160 patients who underwent follow-up colonoscopy, 28 (18%) had HR-CRN. In univariable analysis, indication for surveillance colonoscopy was not found to be associated with the development of metachronous HR-CRN. Instead, the total polyp number at index colonoscopy showed a positive association with the risk of metachronous HR-CRN in trend analysis (p = 0.001). In multivariable analysis, the presence of 5 or more polyps at index colonoscopy was found to be associated with the risk of metachronous HR-CRN (OR, 2.575, p = 0.049) after adjusting for risk factors, such as obesity, diabetes, and smoking. CONCLUSIONS: The risk of metachronous HR-CRN did not differ according to the main indications for surveillance colonoscopy. The presence of 5 or more polyps at index colonoscopy was the only risk factor for metachronous HR-CRN.

Comparison of endoscopic treatments for small gastric adenomas.

BACKGROUND: Gastric adenomas can be successfully treated with endoscopic resection, including endoscopic submucosal dissection (ESD) and endoscopic mucosal resection (EMR). The aim of this study was to evaluate and compare the efficacy of ESD and EMR with circumferential precutting (EMR-P) in the treatment of small gastric adenomas. METHODS: This study included 1014 gastric adenomas ≤ 15 mm in diameter treated with ESD or EMR-P from 2012 to 2019, retrospectively. Propensity score matching between the ESD and EMR-P groups (1:1 to 3:1) was performed according to age, sex, tumor size, tumor location (upper, middle, and lower thirds), morphology, and preprocedural histology. The procedure time and the rates of en bloc resection, complete resection, adverse events, and local recurrence were compared between the two groups. RESULTS: After propensity score matching, 478 lesions (ESD: 295, EMR-P: 183) were analyzed. The rates of en bloc resection (94.9% vs. 93.4%, p = 0.498), complete resection (93.6% vs. 90.2%, p = 0.177), bleeding (8.1% vs. 3.8%, p = 0.063), and local recurrence (0.0% vs. 1.4%, p = 0.185) did not significantly differ between the two groups. The procedure time was significantly longer for ESD than for EMR-P (p < 0.001). In the EMR-P group, the complete resection rate was significantly lower in the upper third than in the middle and lower thirds (p < 0.001). CONCLUSION: EMR-P is as effective as ESD for the treatment of small gastric adenomas. However, the efficacy of EMR-P is lower for gastric adenomas in the proximal stomach.

The Difference of Endoscopic and Histologic Improvements of Atrophic Gastritis and Intestinal Metaplasia After Helicobacter pylori Eradication.

BACKGROUND/AIMS: Helicobacter pylori (H. pylori) is an important risk factor of atrophic gastritis (AG), intestinal metaplasia (IM), and gastric cancer (GC). However, no report to date has described the endoscopic improvement of AG and IM after H. pylori eradication. Thus, the aim of this study was to evaluate the improvement of AG and IM after H. pylori eradication using endoscopic and histologic analyses. METHODS: A total of 380 subjects were prospectively enrolled for up to 12 years and grouped by their H. pylori infection status: negative, non-eradicated, and eradicated. Endoscopic and histologic analyses of AG and IM were performed in the antrum and the corpus, by annual follow-up endoscopy. RESULTS: Endoscopic AG and IM in the antrum and corpus in the eradicated group improved compared to that in the non-eradicated group (AG, P = 0.002 and P = 0.005; IM, P = 0.038 and P = 0.048, respectively). Histologic AG and IM in the antrum and corpus in the eradicated group also improved compared to that in the non-eradicated group (all P < 0.001). Time taken to the endoscopic improvement of AG and IM after H. pylori eradication was significantly longer than time taken to the histologic improvement in the antrum and corpus (AG in antrum: 3.47 ± 2.60 vs. 2.34 ± 1.71 years, P = 0.004; AG in corpus: 3.19 ± 2.30 vs. 1.87 ± 1.48 years, P = 0.002; IM in antrum: 4.40 ± 2.38 vs. 3.62 ± 2.35 years, P = 0.043; and IM in corpus: 4.82 ± 1.08 vs. 3.61 ± 2.22 years, P = 0.007, respectively). CONCLUSIONS: Both endoscopic and histologic improvements of AG and IM were observed after H. pylori eradication, while endoscopic improvement took significantly longer time than histologic improvement.

Correlation between occlusal contact area at various levels of interocclusal thicknesses and masticatory performance.

BACKGROUND: This study aimed to determine the correlation between occlusal contact area and masticatory performance using BiteEye® , a photo occlusal analysis device and the multiple sieve method. OBJECTIVES: To calculate the occlusal contact area at various levels of interocclusal thicknesses and to measure masticatory performance with peanuts as the test material. METHODS: Fifty-two adults (30 men and 22 women) were enrolled according to specific exclusion/inclusion criteria. The occlusal contact area was measured by obtaining the interocclusal record of the maximum intercuspal position (MIP) using silicone impression material. Occlusal contact area measurements were performed in the ranges of 0-149, 0-89, 0-59, 0-29 and 0-9 µm. Masticatory performance was measured by obtaining the median particle size (X 50 ) after converting the weight of comminuted peanuts into size using the multiple sieve method. Statistical analysis was performed at 95% significance level. RESULTS: Interocclusal thickness comparison revealed the highest correlation with X 50 in the 0-149 µm range. Stronger correlations between the occlusal contact area and X 50 were observed in cases of 20 strokes of mastication (r = -.451) than in cases of 10 strokes (r = -.383), in the posterior occlusal contact area (r = -.456) than in the full arch occlusal contact area (r = -.451) and the molar area (r = -.478) than in the premolar area (r = -.296). CONCLUSIONS: The larger the occlusal contact area, the higher the masticatory performance; this correlation was statistically significant. Regarding interocclusal thickness, the highest correlation between the occlusal contact area and masticatory performance was observed in the 0-149 µm range. CLINICAL TRIAL REGISTRATION NUMBER: GWNUDH IRB 2020-A001.

Effect of materials on axial displacement and internal discrepancy of cement-retained implant-supported prostheses.

STATEMENT OF PROBLEM: How axial displacement may be affected by the mechanical properties and internal discrepancy of a cement-retained implant-supported prosthesis is unclear. PURPOSE: The purpose of this in vitro study was to assess the difference in internal discrepancy and axial displacement according to the prosthesis material in cement-retained prostheses splinting nonparallel implants. MATERIAL AND METHODS: Computer-aided design and computer-aided manufacture (CAD-CAM) titanium abutments were fabricated for a vertically placed implant and a 15-degree tilted implant. Three types of prostheses, in zirconia, cobalt-chromium (Co-Cr) alloy, and polymethylmethacrylate resin (PMMA), were fabricated (n=10). The internal discrepancy between the CAD-CAM titanium abutment and the prosthesis was measured by using the replica technique. After luting with an interim cement, they were mounted in Type IV gypsum. The specimens were cyclic loaded, and axial displacement of the prosthesis was measured after 3, 10, 100, and 106 cycles. The internal discrepancy and cumulative axial displacement were assessed by using a 3-way analysis of variance and repeated measures analysis of variance (α=.05). RESULTS: The internal discrepancy of the prosthesis did not differ based on the prosthesis material (P=.869); however, it was significantly different based on the measurement location, with the occlusal discrepancy (224 ±29 µm) being greater than the axial discrepancy (21 ±10 µm) (P<.05). Implants with an angled placement exhibited less axial displacement than implants with vertical placement (P<.05). The PMMA prosthesis demonstrated significantly greater axial displacement than the zirconia or Co-Cr prostheses (P<.05), which were similar (P=.623). CONCLUSIONS: Prostheses made with high-elastic moduli materials exhibited less axial displacement than PMMA prostheses, even though the internal discrepancy was not different. Moreover, vertically placed implants presented a greater axial displacement of the prosthesis than implants with angled placement.