The Morphologic Patella Entry Point Into the Proximal Trochlea Is More Lateral in Recurrent Dislocators Than Controls as Measured by Entry Point-Trochlear Groove Angle.

PURPOSE: To create a metric for evaluating the degree of laterality of the patella's entry into the trochlea, the entry point-trochlear groove (EP-TG) angle, and to evaluate if this laterality is associated with recurrent patella instability. METHODS: The time frame of the study was January 2020 to February 2023. The inclusion criteria were patients treated by the senior author (J.P.F.) (with the exception of 2 patients who were treated by another provider at the institution who was aware of the study) who have been diagnosed with recurrent atraumatic patellar dislocations. Controls without knee pathology were selected from the New Mexico Decedent Imaging Database (NMDID). Simpleware ScanIP was used to create 3-dimensional (3D) models of the distal femurs from computed tomography scans. Anteroposterior images of these 3D models were uploaded to a custom EP-TG angle measuring tool. Three measurers used the tool to measure the EP-TG angle of the distal femurs. RESULTS: Twenty-eight patients were included for the recurrent dislocator group. Twenty-four decedents from the NMDID were selected for the control group, each with a left or right knee chosen randomly for measurement. A 1-sided Mann-Whitney U test, used to evaluate whether the recurrent dislocators had higher EP-TG angle values, yielded a P value <.001, demonstrating a high level of significance. A Bayesian mixed-effect model, used to determine how different the EP-TG angles are between the 2 groups, gave a posterior predictive interval of [11.93°, 19.12°] for the EP-TG angle shift of dislocators. The intraclass correlation coefficient was 0.648. CONCLUSIONS: The morphologic entry point of the patella into the proximal trochlea is more lateral in recurrent patella dislocators than in controls. This increased laterality can be measured by the EP-TG angle, which may be useful information for optimizing treatment of recurrent patella instability. LEVEL OF EVIDENCE: Level III, case control study.

Three-Dimensional Imaging of the Patellofemoral Joint Improves Understanding of Trochlear Anatomy and Pathology and Planning of Realignment.

Three-dimensional (3D) modeling using digital or printed models provides a unique perspective that caters to cognitive spatial ability in a way that can add to our understanding and mental representations of human anatomy. This is particularly useful in the setting of trochlear dysplasia, where the morphology of the groove can exhibit substantial variability and complexity. Using 3D reformatted images and models, a pragmatic understanding of how morphology influences patellofemoral pathology can be gleaned. Further, this perspective facilitates cognition of what patellar tracking may look like after realignment procedures. Using 3D modeling, concepts such as patella alta, trochlear depth, lateralization of the patellar entry point, trochlear curvature, and the presence of a proximal trochlear spur can help afford a better understanding of how trochlear anatomy may influence tracking while also providing insight as to the ideal tracking path. The use of 3D has recently emerged as a useful tool in multiple surgical subspecialties, particularly in situations involving surgical planning or complex anatomy. Given the complexity and variation in trochlear morphology in patients with trochlear dysplasia who develop either patellar instability or focal overloading, 3D modeling is well-suited to provide a perspective that can add to our understanding of trochlear dysplasia, and potentially even how we diagnose and treat it. LEVEL OF EVIDENCE: Level V, expert opinion.

After Primary Shoulder Arthroplasty Appropriate Vancomycin Antibiotic Prophylaxis Does Not Lead to Increased Infectious Complications When Compared to Cefazolin.

INTRODUCTION: In primary shoulder arthroplasty (SA), intravenous (IV) cefazolin has demonstrated lower rates of infectious complications when compared to IV vancomycin. However, previous analyses included SA cohorts with both complete and incomplete vancomycin administration. Therefore, it is currently unclear whether cefazolin still maintains a prophylactic advantage to vancomycin when it is appropriately indicated and sufficiently administered at the time of surgical incision. This study evaluated the comparative efficacy of cefazolin and complete vancomycin administration for surgical prophylaxis in primary shoulder arthroplasty with respect to infectious complications. METHODS: A retrospective cohort study was conducted utilizing a single institution total joint registry database, where all primary SA types (hemiarthroplasty, anatomic total shoulder arthroplasty, reverse shoulder arthroplasty) performed between 2000 to 2019 for elective and trauma indications using IV cefazolin or complete vancomycin administration as the primary antibiotic prophylaxis were identified. Vancomycin was primarily indicated for patients with a severe self-reported penicillin or cephalosporin allergy and/or MRSA colonization. Complete administration was defined as at least 30 minutes of antibiotic infusion prior to incision. All included SA had at least 2 years of clinical follow-up. Multivariable Cox proportional hazard regression was used to evaluate all-cause infectious complications including survival free of prosthetic joint infection (PJI). RESULTS: The final cohort included 7,177 primary SA, 6,879 (95.8%) received IV cefazolin and 298 (4.2%) received complete vancomycin administration. Infectious complications occurred in 120 (1.7%) SA leading to 81 (1.1%) infectious reoperations. Of the infectious complications 41 (0.6%) were superficial infections and 79 were (1.1%) PJIs. When categorized by administered antibiotics, there were no differences in rates of all infectious complications (1.6% vs. 2.3%; P = .352), superficial complications (0.5% vs. 1.3%; P = .071), PJI (1.1% vs. 1.0%; P = .874), or infectious reoperations (1.1% vs. 1.0%; P = .839). On multivariable analyses, complete vancomycin infusion demonstrated no difference in rates of infectious complications compared to cefazolin administration (hazard ratio [HR], 1.50 [95% confidence interval (CI), 0.70 to 3.25]; P = .297), even when other independent predictors of PJI (male sex, prior surgery, and Methicillin-resistant Staphylococcus aureus colonization) were considered. CONCLUSIONS: In comparison to cefazolin, complete administration of vancomycin (infusion to incision time greater than 30 minutes) as the primary prophylactic agent does not adversely increase the rates of infectious complications and PJI. Prophylaxis protocols should promote appropriate indications for the use of cefazolin or vancomycin, and when necessary, ensure complete administration of vancomycin to mitigate additional infectious risks after primary SA.

Operative Treatment of Acromial and Scapular Spine Fracture Nonunions Complicating Reverse Total Shoulder Arthroplasty.

BACKGROUND: Fractures of the acromion and spine can have a major impact on the outcome of reverse shoulder arthroplasty (RSA) with respect to pain, motion, and function. Reports on internal fixation for these fractures are isolated to small series or case reports with variable outcomes. The purpose of this study was to report on the outcome of open reduction and internal fixation (ORIF) of acromion or spine fractures encountered before or after RSA and describe our evolution of fixation techniques. METHODS: Between 2011 and 2023, 22 fractures or nonunions of the acromion or spine of the scapula underwent ORIF at a single institution and were followed for a minimum of 1 year. In 16 shoulders, fractures occurred after RSA, whereas 5 shoulders underwent ORIF prior to RSA. One shoulder had undergone prior failed ORIF elsewhere and revision ORIF was performed at our institution. There were 10 males and 12 females with a mean age of 67 (SD=15.1) years. Fixation strategies included single (n=11) and double plate fixation (n=11). Kruskal-Wallis one-way analyses of variance were used to analyze continuous variables and Chi-square tests employed for categorical variables. RESULTS: Of the 5 fractures treated with ORIF pre-RSA, 1 shoulder suffered an additional fracture medial to the hardware and 1 required additional bone grafting for incomplete union at the time of RSA. These 5 shoulders all underwent RSA uneventfully, but one fracture experienced late displacement of the scapular spine nonunion, leading to plate removal. Of the 16 post-RSA ORIF shoulders, radiographic union was confirmed in 14 and substantial residual inferior angulation identified in 3. New fractures occurred after ORIF in 5 shoulders. For patients who underwent ORIF after RSA, pain scores improved from a mean of 8 to 1.9 points, with more modest elevation gains (58.2° to 91.3° pre- and postoperatively, respectively). CONCLUSIONS: ORIF of acromion and scapular spine fractures or nonunions in the setting of RSA have the potential to lead to union. When these fractures and nonunions are encountered prior to RSA, ORIF allows for uneventful RSA implantation, but secondary displacement may occur. ORIF seems to lead to improvements in pain, but more modest improvements in motion and function. Our fixation strategy has evolved to (1) dual plating, (2) spanning the whole length of the spine with one of the plates, (3) use of hook features under the acromion or os trigonum if possible, and (4) liberal use of bone graft.

Percutaneous Ablation, Osteoplasty, Reinforcement, and Internal Fixation for Pain and Ambulatory Function in Periacetabular Osteolytic Malignancies.

Background Osteolytic neoplasms to periacetabular bone frequently cause pain and fractures. Immediate recovery is integral to lifesaving ambulatory oncologic care and maintaining quality of life. Yet, open acetabular reconstructive surgeries are associated with numerous complications that delay cancer treatments. Purpose To determine the effectiveness for short- and long-term pain and ambulatory function following percutaneous ablation, osteoplasty, reinforcement, and internal fixation (AORIF) for periacetabular osteolytic neoplasm. Materials and Methods This retrospective observational study evaluated clinical data from 50 patients (mean age, 65 years ± 14 [SD]; 25 men, 25 women) with osteolytic periacetabular metastases or myeloma. The primary outcome of combined pain and ambulatory function index score (range, 1 [bedbound] through 10 [normal ambulation]) was assessed before and after AORIF at 2 weeks and then every 3 months up to 40 months (overall median follow-up, 11 months [IQR, 4-14 months]). Secondary outcomes included Eastern Cooperative Oncology Group (ECOG) score, infection, transfusion, 30-day readmission, mortality, and conversion hip arthroplasty. Serial radiographs and CT images were obtained to assess the hip joint integrity. The paired t test or Wilcoxon signed-rank test and Kaplan-Meier analysis were used to analyze data. Results Mean combined pain and ambulatory function index scores improved from 4.5 ± 2.4 to 7.8 ± 2.1 (P < .001) and median ECOG scores from 3 (IQR, 2-4) to 1 (IQR, 1-2) (P < .001) at the first 2 weeks after AORIF. Of 22 nonambulatory patients, 19 became ambulatory on their first post-AORIF visit. Pain and functional improvement were retained beyond 1 year, up to 40 months after AORIF in surviving patients. No hardware failures, surgical site infections, readmissions, or delays in care were identified following AORIF. Of 12 patients with protrusio acetabuli, one patient required a conversion hemiarthroplasty at 24 months. Conclusion The ablation, osteoplasty, reinforcement, and internal fixation, or AORIF, technique was effective for short- and long-term improvement of pain and ambulatory function in patients with periacetabular osteolytic neoplasm. © RSNA, 2023.

Prior bariatric surgery is associated with an increased rate of complications after primary shoulder arthroplasty independent of body mass index.

BACKGROUND: Bariatric surgery (BS) is a debated, yet commonly used, management strategy in the treatment of morbidly obese patients. Despite recent advances in BS techniques, there is limited data on the potential impact of prior BS in patients undergoing shoulder arthroplasty. This investigation evaluated the outcomes of primary shoulder arthroplasty (SA) in patients with prior BS when compared to matched controls. METHODS: Over a 31-year period (1989-2020), 183 primary SA (12 hemiarthroplasties [HAs], 59 anatomic total shoulder arthroplasties [aTSAs], and 112 reverse shoulder arthroplasties [RSAs]) in patients with prior BS and a minimum of 2-year follow-up had been performed at a single institution. This cohort was matched 1:1:1 according to age, sex, diagnosis, implant, American Society of Anesthesiologists score, Charlson Comorbidity Index, and SA surgical year to separate control groups of SA with no history of BS and a BMI of either <40 (low BMI group) or ≥40(high BMI group). Surgical complications, medical complications, reoperations, revisions, and implant survivorship were assessed. The mean follow-up time was 6.8 years (range, 2-21 years). RESULTS: The bariatric surgery cohort had a higher rate of any complication (29.5% vs. 14.8% vs. 14.2%; P < .001), surgical complications (25.1% vs. 12.6% vs. 12.6%; P = .002), and noninfectious complications (20.2% vs. 10.4% vs. 9.8%; low P = .009 and high P = .005) relative to both low and high BMI groups. For BS patients, the 15-year survivorship free of any complication was 55.6 (95% confidence interval [CI], 43.8%-70.5%) compared with 80.3% (95% CI, 72.3%-89.3%) in the low BMI group and 75.8% (65.6%-87.7%) in the high BMI group (P < .001). Comparisons of the bariatric and matched groups demonstrated no statistical differences between the risk of reoperation or revision surgery. When SA was performed within 2 years of BS, higher rates of complications (50% vs. 27.0%; P = .030), reoperations (35.0% vs. 8.0%; P = .002), and revisions (30.0% vs. 5.5%; P = .002) were observed. CONCLUSIONS: Primary shoulder arthroplasty in patients with prior bariatric surgery demonstrated an elevated complication profile when compared to matched cohorts of patients with no history of BS and either low or high BMI. These risks were more pronounced when shoulder arthroplasty was performed within 2 years of bariatric surgery. Care teams should be aware of the potential implications of the postbariatric metabolic state and investigate whether further perioperative optimization is warranted.

Increasing severity of preoperative anemia is associated with higher postoperative medical and surgical complications after primary shoulder arthroplasty.

BACKGROUND: Anemia is a major cause of morbidity worldwide and compounds numerous medical conditions. Studies have found associations between anemia and both medical and surgical complications after shoulder arthroplasty (SA); however, most of these studies have used commercially available national databases with limited information on outcomes and typically short-term follow-up. Our study sought to evaluate the midterm outcomes of primary SA at a single institution when stratified by the degree of preoperative anemia. METHODS: Between 2000 and 2020, 5231 primary SA (477 hemiarthroplasties, 2091 anatomic total SA, and 2335 reverse SA) with preoperative hematocrit values available and a minimum follow-up of 2 years were collected from a single-institution joint registry database. The severity of anemia was subclassified as no anemia (hematocrit >39% for males, >36% for females; n = 4194 [80.2%]), mild anemia (hematocrit 33%-39% for males, 33%-36% for females; n = 742 [14.2%]), and moderate-to-severe anemia (hematocrit <33% for both males and females; n = 295 [5.6%]). The mean follow-up time for the entire cohort was 5.9 years (range, 2-22 years). Medical and surgical complications, reoperations, revisions, and implant survivorship were assessed. RESULTS: SA with moderate-to-severe anemia had the highest rate of nonfatal and nontransfusion medical complications (5.1%) relative to the nonanemic (1.2%; P < .001) and mild anemic groups (1.5%; P < .001). Similarly, SA with moderate-to-severe anemia had the highest rate of surgical complications (19.3%) compared with mild anemia (14.3%; P = .044) and no anemia (11.6%; P < .001). Postoperative transfusion was most frequent in the moderate-to-severe anemia cohort (40.3%) compared with the mild anemia (14.2%; P < .001) and nonanemic groups (2.5%; P < .001). Furthermore, SA who received postoperative transfusions had a higher risk of nonfatal medical complications (8.2% vs. 1.0%; P < .001), 90-day mortality (1.5% vs. 0.03%; P = .001), and surgical complications (19.5% vs. 12.0%; P < .001) when compared with those without transfusion. CONCLUSIONS: Moderate-to-severe anemia (hematocrit <33% for both males and females) was identified in approximately 5.6% of patients who underwent SA at a single institution and was associated with increased medical and surgical complications. Patients who received postoperative transfusions presented elevated rates of medical complications, 90-day mortality, and surgical complications. Health care teams should be aware of these risks in order to provide more individualized medical optimization and postoperative monitoring.

The Dimeglio Olecranon Method Is Reliable in Diverse, Contemporary Patients for Predicting Future Growth.

BACKGROUND: Growth assessment, which relies on a combination of radiographic and clinical markers, is an integral part of clinical decision-making in pediatric orthopaedics. The aim of this study is to evaluate the accuracy and reliability of the Diméglio skeletal age system using a modern cohort of pediatric patients. METHODS: A retrospective review was undertaken of all patients at a large tertiary pediatric hospital who had lateral forearm radiographs (before the age of 14 y for females and before 16 y for males). In addition, all of these patients had height measurements within 60 days of their forearm x-ray and a final height listed in their medical records. The x-rays were graded by 5 reviewers according to the Diméglio skeletal age system. Inter and intraobserver reliability was tested. RESULTS: One hundred forty-seven patients with complete radiographs and height data were evaluated by 5 observers ranging in experience from medical students to senior pediatric orthopaedic surgeons. The Diméglio system demonstrated excellent reliability across levels of training with an intraobserver correlation coefficient of 0.995 (95% CI, 0.991-0.997) and an interobserver correlation coefficient of 0.906 (95% CI, 0.857-0.943). When the Diméglio stage was paired with age and sex in a multivariable linear regression model predicting the percent of final height, the adjusted R2 was 78.7% (model P value <0.001), suggesting a strong relationship between the Diméglio stage (plus age and sex) and percent of final height. CONCLUSION: This unique approach to maturity assessment demonstrates that the Diméglio staging system can be used effectively in a modern, diverse patient population. LEVEL OF EVIDENCE: Level II; retrospective cohort study.

Femoroacetabular impingement in ancient Nubia 1400-656 BC.

INTRODUCTION: There is significant recent interest in femoroacetabular impingement (FAI) in orthopaedics. The etiology of the cam deformity is unknown but has been hypothesized to be due to stresses from sporting activities in our modern society. Few archeological studies exist of femora and FAI. This study reviewed proximal femoral anatomy in a skeletal collection from the ancient Nile valley archeological site at Tombos 1400-656 BC. METHODS: Digital photographs of the femora were used to obtain angular measurements of the apparent neck shaft, true neck shaft, version, inclination, and α and ß angles of Nötzli. All photographs were reviewed by two orthopaedic surgeons for cam and pincer lesions. Sex and age of the specimens was determined when possible. A cam lesion was defined as any femur demonstrating an α angle > 50° or when a cam deformity was seen on visual inspection by both orthopaedic surgeons. Pincer lesions were identified upon visual inspection by both orthopaedic surgeons, when the femoral neck demonstrated impaction lesions, as pelvis radiographs could not be obtained. RESULTS: There were 126 unique femora; 69 female and 57 male. Age estimates were possible in 100 and was 15-24 years in 14, 25-34 years in 33, 35-49 years in 28, 50-69 years in 17, and ≥ 70 years in 8. There were nine femora (seven individuals) with cam lesions (7%) and five femora (four individuals) with pincer lesions (4%). One demonstrated a combined lesion. CONCLUSION: FAI existed in ancient Nile valley inhabitants and is thus not only a product of modern day life style athletics. This contrasts with Native Americans living in Ohio 700-1000 AD where no FAI was identified. This difference is likely due to combinations of different types of activity, diet, and genetics. Further research of ancient populations is needed to further answer this question. LEVEL OF EVIDENCE: IV-cohort study.

Combining Lower Extremity Radiographic Markers Begets More Accurate Predictions of Remaining Skeletal Growth.

BACKGROUND: Radiographic markers of skeletal maturity are vital to the prediction and interpretation of skeletal growth patterns. Accurate predictions of skeletal maturity factor into the management of common musculoskeletal disorders. Bone age is conventionally measured using hand and wrist radiographs. The primary study objective was to optimize skeletal maturity estimates based on the morphology of markers at the hip, knee, and foot rather than conventional upper extremity radiographs. METHODS: This was a retrospective analysis of children from the Bolton-Brush collection with anteroposterior radiographs of the hip and anteroposterior and lateral radiographs of the knee and foot, and heights recorded at the time of each radiograph. The percent growth achieved (%GA) was calculated as a function of final patient height. Poor quality radiographs were excluded, leaving 50 patients-32 females and 18 males-and 1068 radiographs for analysis. Skeletal maturity was evaluated using the Oxford bone, O'Connor knee, and calcaneal apophyseal scores. Interrater and intrarater reliability analyses were performed for hip and knee scores. Multiple linear regressions were conducted on these scores and chronologic age as predictors of %GA. Mean differences were calculated between actual and estimated %GAs. All analyses were performed in Prism 8.0. RESULTS: Each lower extremity skeletal maturity score served as statistically significant, independent predictors of %GA, the accuracy and strength of which increased with the addition of chronologic age. The integration of all 3 systems and chronologic age yielded the most predictive, accurate model predictive of %GA, which can be used to determine percent growth remaining. However, this fully integrated system was not statistically superior to the combination of knee and foot scores and knee score and chronologic age, which yield similarly accurate %GA predictions. The hip and knee systems demonstrated good to excellent interrater and intrarater reliability. CONCLUSIONS: Integration of bone age scores across different regions of the lower extremity has the potential to facilitate orthopaedic decision-making using radiographs already obtained in the treatment of pediatric musculoskeletal conditions. LEVEL OF EVIDENCE: Level IV.

The More the Merrier: Integrating Multiple Models of Skeletal Maturity Improves the Accuracy of Growth Prediction.

BACKGROUND: Multiple systems using radiographic skeletal markers to measure development have been described, including the Greulich and Pyle Atlas (GP), the Fels Method (Fels), and the Sanders Hand Classification (Sanders). The purpose of this study was to quantitatively assess whether the integration of skeletal maturity assessment methods and demographic variables improves the accuracy of pediatric growth predictions over the use of skeletal markers or chronologic age alone. METHODS: The Brush Inquiry contains prospectively collected longitudinal data on children who lived in Cleveland, Ohio between 1926 and 1942. A total of 16 boys and 29 girls were selected for study. All had age, height, and an anteroposterior radiograph of the hand at each of 3 visits. Those visits occurred at 85%, 90%, and 95% of final height. We determined the growth completed at each visit by dividing the height observed by the final height at skeletal maturity. Boys and girls were analyzed separately using chronologic age, height, GP, Fels, and Sanders. The residual difference between the height predicted and actual height, as well as the SD of the prediction error of the cohort at each time point was calculated. To account for multiple visits from each subject, all linear models were produced using the generalized estimating equations (GEEs) procedure. RESULTS: For boys, age, GP, and Fels performed similarly in predicting growth remaining at all 3 time points. For girls, age, GP, and Fels performed similarly in predicting growth remaining at the 85% and 95% time points; however, the Fels Method demonstrated improved performance at the 90% time point compared with chronologic age (P = 0.0076) and GP alone (P = 0.0155). For both boys and girls, the most accurate multivariate GEE model with the lowest SD of prediction error integrated Fels, age, GP, Sanders, and height. CONCLUSIONS: The most accurate multivariate GEE model of growth prediction for both boys and girls integrated Fels, age, GP, Sanders, and height. When calculating the amount of growth remaining, it is prudent to integrate multiple systems for greater predictive accuracy. LEVEL OF EVIDENCE: Level III.

Femoral and Tibial Reconstruction for Skeletal Metastases and Pathologic Fractures.

Skeletal metastases of the femur and tibia leading to pathologic fractures or large skeletal defects can be managed with surgical reconstruction, resulting in improved patient outcomes and functionality. The indications for femoral and tibial reconstruction are dependent on several factors, including goals of management, age, comorbidities, site and extent of the lesion, soft-tissue involvement, and history of radiation or other systemic therapy. The goal of reconstruction of large bone defects is to restore anatomy and function while minimizing the risk of complications, implant failure, and subsequent revision procedure. Common reconstructive options include fixation with plates and screws, intramedullary nails, and endoprosthesis implantation.

Construction and evaluation of a clinically relevant model of septic arthritis.

Despite the creation of several experimental animal models for the study of septic arthritis, a protocol detailing the development of a reliable and easily reproducible animal model has not yet been reported. The experimental protocol described herein for the development of a clinically relevant mouse model of septic arthritis includes two main study stages: the first stage consisting of the preparation of the mice and of the methicillin-resistant Staphylococcus aureus (MRSA) cultures, followed by direct inoculation of MRSA into the knee joints of C57BL/6J mice (25-40 min); and a second study stage consisting of multiple sample collection and data analysis (1-3 days). This protocol may be carried out by researchers skilled in mouse care and trained to work with biosafety-level-2 agents such as MRSA. The model of septic arthritis described here has demonstrated clinical relevance in developing intra-articular inflammation and cartilage destruction akin to that of human patients. Moreover, we describe methods for serum, synovial fluid and knee joint tissue analysis that were used to confirm the development of septic arthritis in this model, and to test potential treatments. This protocol confers the advantages of enabling granular evaluation of the pathophysiology of MRSA infection and of the efficacy of therapeutic medications; it may also be employed to study a range of native joint diseases beyond inflammatory pathologies alone.

3D Printed Models of Trochlear Dysplasia and Trochleoplasty Simulation for Trainee Education.

Trochlear dysplasia is a major contributor to patellofemoral instability and subsequent failure of isolated soft tissue reconstruction procedures in the treatment of recurrent patellar dislocation and/or subluxation. Trochleoplasty procedures aim to address abnormal osseous trochlear morphologic factors that contribute to patellar maltracking. However, teaching these techniques is limited by the lack of reliable training models for trochlear dysplasia and trochleoplasty simulation. Although a cadaveric knee model of trochlear dysplasia for trochleoplasty simulation has been recently described, cadaveric knees are less amenable for use in trochleoplasty planning and surgeon training because of the absence of reliable, natural dysplastic anatomic relationships, such as suprapatellar spurs due to the rarity of dysplastic cadavers and the high cost of cadaveric specimens. Furthermore, readily available sawbone models represent "normal" osseous trochlear morphology and are difficult to modify and bend due to their material composition. Given this, we have developed a cost-effective, reliable, and anatomically accurate three-dimensional (3D) knee model of trochlear dysplasia for trochleoplasty simulation and trainee education.

Three-Dimensional Reproductions for Surgical Decision-Making in the Treatment of Recurrent Patella Dislocation.

Patellofemoral instability may be attributed to a variety of soft tissue and osseous factors, of which dysplasia of the femoral trochlea significantly predisposes patients to recurrent instability events. Surgical planning and decision-making remain wholly predicated upon two-dimensional imaging-derived measurements and classification systems, although aberrant patellar tracking in the setting of trochlea dysplasia is a three-dimensional (3-D) complexity. 3-D reconstructions of the patellofemoral joint (PFJ) may be considered to better comprehend the complex anatomy of patients with recurrent patella dislocation and/or trochlea dysplasia. We describe a classification and integrated interpretation system by which these 3-D reproductions of the PFJ may be analyzed to enhance surgical decision making in the treatment of this condition to achieve optimal joint stability and long-term preservation.

Validation of the Foot and Ankle Outcome Score (FAOS) for Osteochondral Lesions of the Ankle.

BACKGROUND: The purpose of this study was to validate the Foot and Ankle Outcome Score (FAOS) for osteochondral lesions of the talus (OLTs). We hypothesize that the FAOS will meet all 4 psychometric criteria for validity in this patient population. METHODS: From 2008 to 2014, a total of 208 patients with OLTs were included in the construct validity portion of the study. All patients completed FAOS and 12-Item Short-Form Health Survey (SF-12) scores. Twenty additional patients were prospectively recruited and were asked to complete questionnaires to determine the relevance of each of the FAOS questions as it related to their OLT. Forty-four patients completed the FAOS 1 month after the first FAOS to assess reliability via Spearman correlation coefficient. Responsiveness of the FAOS was assessed with 54 patients who had both preoperative and postoperative FAOS scores via Student paired t test with significance determined as P < .05. In total, 229 unique patients were included in this study. RESULTS: Statistically significant associations were found between all FAOS and SF-12 subscales (P < .01). The FAOS symptoms subscale demonstrated the lowest correlation with the SF-12 physical health domains. No floor or ceiling effects were identified. Weak correlations were calculated between the 5 FAOS subscales and the SF-12 mental component summary score. All FAOS domains met the threshold for acceptable content validity (score > 2.0). All FAOS subscales demonstrated acceptable test-retest reliability, with ICC values ranging from 0.81 (ADL) to 0.92 (Pain). CONCLUSION: This study demonstrates the acceptable yet moderate construct and content validity, reliability, and responsiveness of the FAOS for patients with OLTs of the ankle joint. We endorse the use of the FAOS in evaluating ankle OLTs in both the research and clinical setting and consider it a useful patient-reported, self-administered instrument following surgical intervention. LEVEL OF EVIDENCE: Level IV, retrospective case study.

Three-Dimensional Printing of Models of Patellofemoral Joint Articular Cartilage in Patients With Patella Instability for Observing Joint Congruity.

Three-dimensional (3D) modeling and printing are increasingly used in the field of orthopaedic surgery for both research and patient care. One area where they are particularly helpful is in improving our understanding of the patellofemoral (PF) joint. Heretofore, morphological studies that use 3D models of the PF joint have primarily been based on computed tomography imaging data and thus do not incorporate articular cartilage. Here, we describe a method for creating 3D models of the articular surfaces of the PF joint based on magnetic resonance imaging. Models created using this technique can be used to improve our understanding of the morphology of the articular surfaces of the PF joint and its relationship to joint pathologies. Of particular interest is our finding of articular congruity in printed articular cartilage surfaces of dysplastic PF joints of recurrent patella dislocators.

Parathyroid hormone therapy improves MRSA-infected fracture healing in a murine diabetic model.

Introduction: Diabetes mellitus (DM) impairs fracture healing and is associated with susceptibility to infection, which further inhibits fracture healing. While intermittent parathyroid hormone (1-34) (iPTH) effectively improves fracture healing, it is unknown whether infection-associated impaired fracture healing can be rescued with PTH (teriparatide). Methods: A chronic diet-induced type 2 diabetic mouse model was used to yield mice with decreased glucose tolerance and increased blood glucose levels compared to lean-fed controls. Methicillin-resistant Staphylococcus aureus (MRSA) was inoculated in a surgical tibia fracture model to simulate infected fracture, after which mice were treated with a combination of antibiotics and adjunctive teriparatide treatment. Fracture healing was assessed by Radiographic Union Scale in Tibial Fractures (RUST), micro-computed tomography (µCT), biomechanical testing, and histology. Results: RUST score was significantly poorer in diabetic mice compared to their lean nondiabetic counterparts. There were concomitant reductions in micro-computed tomography (µCT) parameters of callus architecture including bone volume/total volume, trabecular thickness, and total mineral density in type 2 diabetes mellitus (T2DM) mice. Biomechanicaltesting of fractured femora demonstrated diminished torsional rigidity, stiffness, and toughness to max torque. Adjuvant teriparatide treatment with systemic antibiotic therapy improved numerous parameters of bone microarchitecture bone volume, increased connectivity density, and increased trabecular number in both the lean and T2DM group. Despite the observation that poor fracture healing in T2DM mice was further impaired by MRSA infection, adjuvant iPTH treatment significantly improved fracture healing compared to antibiotic treatment alone in infected T2DM fractures. Discussion: Our results suggest that teriparatide may constitute a viable adjuvant therapeutic agent to improve bony union and bone microarchitecture to prevent the development of septic nonunion under diabetic conditions.

Three-Dimensional Printing of the Patellofemoral Joints of Patellar Instability Patients.

Three-dimensional (3D) modeling and printing comprise an important tool for orthopaedic surgeons. One area in which 3D modeling has the potential to dramatically improve our understanding of biomechanical kinematics is pathologies of the patellofemoral joint, in particular trochlear dysplasia. We describe a method for creating 3D printed models of the patellofemoral joint, including computed tomography image acquisition, image segmentation, model creation, and 3D printing. The models created can help surgeons understand and plan surgery for recurrent patellar dislocations.

Three-dimensional printing versus freehand surgical techniques in the surgical management of adolescent idiopathic spinal deformity.

Background: Three-dimensional (3D) printed guides are finding increasing applications in the field of orthopaedic surgery and more recently spine surgery. This retrospective cohort study compares benefits and costs of 3D printed guides in surgical treatment of adolescent idiopathic scoliosis (AIS) compared to freehand techniques. Methods: Intraoperative screw placement was conducted either with 3D printed guides (3D cohort) or traditional freehand technique (freehand cohort) for AIS patients undergoing spinal fusion at a single institution. Patient and perioperative data include: screw placement time, length of surgery, blood loss, hospital stay, spinal curvature correction, total implant costs and training level of surgical assist. Multivariate analysis assessed for confounding and effect modification. P-values <0.05 were considered significant. Results: There were 29 patients included in analyses, 18 in the 3D and 11 in the freehand (FH) cohort, for a total of 263 3D and 307 freehand screws. Between cohorts, there were no significant differences in patient age (P=0.93), gender (P=0.15), height (P=0.18) or weight (P=0.40). The 3D cohort (mean $26,215, SD =$6,374) had significantly higher implant costs than FH (mean $18,660, SD =$5,587, P=0.003) with significantly reduced intraoperative blood loss (mean 559 mL, SD =273 FH; vs. mean 357 mL, SD =123 3D; P=0.01). On multivariate analysis, surgical residents had significantly faster screw placement times when using 3D guides (P<0.001) than when placing screws freehand. There were no significant differences between cohorts in length of postoperative hospitalization, spinal levels fused, or coronal or sagittal curve correction. Conclusions: At significant cost, 3D printed guides reduce intraoperative blood loss compared to freehand pedicle screw placement and reduce screw placement time for surgical residents.