Natural approach of using nisin and its nanoform as food bio-preservatives against methicillin resistant Staphylococcus aureus and E.coli O157:H7 in yoghurt.

BACKGROUND: Natural antimicrobial agents such as nisin were used to control the growth of foodborne pathogens in dairy products. The current study aimed to examine the inhibitory effect of pure nisin and nisin nanoparticles (nisin NPs) against methicillin resistant Staphylococcus aureus (MRSA) and E.coli O157:H7 during the manufacturing and storage of yoghurt. Nisin NPs were prepared using new, natural, and safe nano-precipitation method by acetic acid. The prepared NPs were characterized using zeta-sizer and transmission electron microscopy (TEM). In addition, the cytotoxicity of nisin NPs on vero cells was assessed using the 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. The minimum inhibitory concentrations (MICs) of nisin and its nanoparticles were determined using agar well-diffusion method. Further, fresh buffalo's milk was inoculated with MRSA or E.coli O157:H7 (1 × 106 CFU/ml) with the addition of either nisin or nisin NPs, and then the inoculated milk was used for yoghurt making. The organoleptic properties, pH and bacterial load of the obtained yoghurt were evaluated during storage in comparison to control group. RESULTS: The obtained results showed a strong antibacterial activity of nisin NPs (0.125 mg/mL) against MRSA and E.coli O157:H7 in comparison with control and pure nisin groups. Notably, complete eradication of MRSA and E.coli O157:H7 was observed in yoghurt formulated with nisin NPs after 24 h and 5th day of storage, respectively. The shelf life of yoghurt inoculated with nisin nanoparticles was extended than those manufactured without addition of such nanoparticles. CONCLUSIONS: Overall, the present study indicated that the addition of nisin NPs during processing of yoghurt could be a useful tool for food preservation against MRSA and E.coli O157:H7 in dairy industry.

Co-crystallization of Hesperidin with different co-formers to enhance solubility, antioxidant and anti-inflammatory activities.

Hesperidin (HSP) is a natural flavonoid glycoside with very low aqueous solubility and a slow dissolution rate, limiting its effectiveness. This study aims to address these issues by creating co-crystals of hesperidin with water-soluble small molecules (co-formers) such as L-arginine, glutathione, glycine, and nicotinamide. Using the solvent drop grinding method, we prepared three different molar ratios of hesperidin to co-formers (1:1, 1:3, and 1:5) and conducted in-vitro solubility and dissolution studies. The results demonstrated that the prepared co-crystals exhibited significantly enhanced solubility and dissolution rates compared to untreated hesperidin. Of particular note, the HSP co-crystals formula (HSP: L-arg 1:5) displayed approximately 4.5 times higher dissolution than pure hesperidin. Further analysis using FTIR, powder x-ray diffraction patterns, and DSC thermograms validated the formation of co-crystals between HSP and L-arginine. Additionally, co-crystallization with L-arginine improved the in vitro anti-inflammatory and antioxidant activities of hesperidin compared to the untreated drug. This study highlights the potential of using water-soluble small molecules (co-formers) through co-crystallization to enhance the solubility, dissolution, and biological activities of poorly water-soluble drugs. Furthermore, in vivo studies are crucial to validate these promising results.

HPMC-Zein Film-forming Gel Loaded with 5-Fluorouracil Coupled with CO2 Laser Dermabrasion for Managing Stable Vitiligo.

Vitiligo is a significant dermatological challenge affecting 0.5 to 2% of the global population. Despite the various existing medical approaches, current vitiligo treatments are far from ideal. The present study aimed to prepare and evaluate a film-forming gel of 5 fluorouracil (5FU) using different ratios of hydroxypropyl methylcellulose (HPMC) and Zein for treating vitiligo. The prepared film-forming gels were fully characterized in terms of morphology, Fourier-transform infrared spectroscopy, drug content, pH, drying time, in-vitro drug release, and clinical investigation. A 32-full factorial design was used to study the impact of varying concentrations of HPMC (X1) and Zein (X2) on the percentage of 5FU released (Y1) from the prepared film-forming gels. Scanning electron microscopy (SEM) revealed a cross-linked network structure between polymers. An increase in HPMC concentration (2-4%) correlated with higher 5FU release, whereas increased Zein concentration (1-2%) resulted in reduced 5FU release. Furthermore, patients treated with 5FU film-forming gel after dermabrasion with fractional CO2 (FCO2) laser exhibited a significant decrease in JAK3 gene expression and higher effectiveness than those treated with FCO2 laser alone. Our results suggest that the film-forming gel of 5FU is promising as an effective formulation for treating vitiligo.

Gefitinib-loaded starch nanoparticles for battling lung cancer: Optimization by full factorial design and in vitro cytotoxicity evaluation.

Lung cancer is the number one killer among all cancer types. For decades, clinicians have been using conventional chemotherapeutics, but they can't rely on them alone anymore, because they poison bad cells and good cells as well. Researchers exploited nanotechnology as a potential tool to develop a platform for drug delivery to improve therapeutic efficiency. A quality by design synthesis of gefitinib-loaded starch nanoparticles (Gef-StNPs) has emerged as an essential tool to study and optimize the factors included in their synthesis. Therefore, we applied design of experiment (DOE) tools to attain the essential knowledge for the synthesis of high-quality Gef-StNPs that can deliver and concentrate the gefitinib (Gef) at A549 cells, thereby improving therapeutic efficacy and minimizing adverse effects. The in vitro cytotoxicity after exposing the A549 human lung cancer cells to the optimized Gef-StNPs was found to be much higher than that of the pure Gef (IC50 = 6.037 ± 0.24 and 21.65 ± 0.32 µg/mL, respectively). The optimized Gef-StNPs formula showed superiority over the pure Gef regarding the cellular uptake in A549 human cell line (3.976 ± 0.14 and 1.777 ± 0.1 µg/mL) and apoptotic population (77.14 ± 1.43 and 29.38 ± 1.11 %), respectively. The results elucidate why researchers have a voracious appetite for using natural biopolymers to combat lung cancer and paint an optimistic picture of their potential to be a promising tool in battling lung cancer.

Cyclodextrin/Adamantane-Grafted Polyethylene Glycol-Based Self-assembling Constructs for Topical Delivery of Ketorolac Tromethamine: Formulation, Characterization, and In Vivo Studies.

Topical formulation of non-steroidal anti-inflammatory drugs (NSAIDs) exhibits many advantages over the oral administration route, such as avoiding the direct effect on GIT and avoiding the poor oral bioavailability of such drugs. Our study aims to develop a new self-assembling construct based on the hydrophobic interaction between adamantane terminated poly (ethylene glycol) polymers and polymerized ß-cyclodextrin. The viscous constructs were developed from direct mixing of host and guest polymer solutions, indicating spontaneous formation without cross-linkers. The modified system was evaluated by different analyses, including X-ray diffractometry, electron microscopy, isothermal titration calorimetry, and rheological analysis. Moreover, such a system's ability for drug loading and release was investigated via the in vitro release of ketorolac tromethamine (KT) as a model of NSAIDs. Finally, the prepared formulas were applied on a rat paw edema model to prove the enhanced anti-inflammatory activities. The obtained results indicated that the modified constructs have a rubbery porous structure with an amorphous nature. Also, from rheological results, the modified system exhibited a viscous behavior with higher loss modulus (G″) compared with storage (G'). The inclusion complexation between cyclodextrin and adamantane moieties was proved by the recorded high binding constants with a 1:1 stoichiometric ratio. Furthermore, the results showed the successful KT incorporation into the modified system and quantitatively released through a semi-permeable membrane in a sustained fashion (over 24 h). Finally, the in vivo results of the medicated constructs showed a significant inhibition of the induced inflammation and swelling, indicating that the modified construct has a great utility for safe non-irritating topical delivery applications.

The role of sodium lauryl sulfate on formulation of directly compressed tablets containing simvastatin and aspirin: Effect on drugs dissolution and gastric mucosa.

According to the American College of Cardiology/American Heart Association (ACC/AHA), both aspirin and statin are used in the primary prevention of cardiovascular diseases. Aspirin (ASA) is contraindicated if there is gastrointestinal bleeding because it will exaggerate the condition. In this study, the effect of surfactant; sodium lauryl sulfate (SLS), in enhancing the in vitro dissolution of simvastatin (SIM) and ASA, as well as gastric irritation and upset, was studied. Oral tablets containing both ASA and SIM with and without the SLS were manufactured using the direct compression technique. The prepared tablets were characterized with respect to hardness, friability, uniformity of dosage units, in vitro disintegration, and dissolution. The effect of the addition of SLS in reducing the in vivo irritation and protection of gastric mucosa were also investigated. The results showed that the compressed tablets possessed sufficient hardness, acceptable friability, and are uniform with respect to disintegration, drugs contents, and tablet weight. The results showed that SIM alone exhibited a gastroprotective effect on the induced irritation. In addition, the incorporation of the SLS in the tablets containing SIM and ASA significantly enhanced the dissolution rates of both drugs and significantly decreased the gastric irritation and the ulcer index. The ulcer index of aspirin was decreased from 2.3 for tablets manufactured without SLS to 0.8 for tablets containing SLS. In a conclusion, the addition of pH modifier surfactant; SLS could enhance the dissolution rate of poorly soluble acidic drugs, reduce gastric upset and irritation without any effect on the main characters of the tablets. Moreover, the addition of SLS is very useful in improving the therapeutic activities and reducing the side effects of ASA and SIM for patients who require long-term administration of these drugs.

Design and synthesis of novel pyrazolo[3,4-d]pyrimidin-4-one bearing quinoline scaffold as potent dual PDE5 inhibitors and apoptotic inducers for cancer therapy.

PDE5 targeting represents a new and promising strategy for apoptosis induction and inhibition of tumor cell growth due to its over-expression in diverse types of human carcinomas. Accordingly, we report the synthesis of series of pyrazolo[3,4-d]pyrimidin-4-one carrying quinoline moiety (11a-r) with potential dual PDE5 inhibition and apoptotic induction for cancer treatment. These hybrids were structurally elucidated and characterized with variant spectroscopic techniques as 1H NMR, 13C NMR and elemental analysis. The assessment of their anticancer activities has been declared. All the rationalized compounds 11a-r have been selected for their cytotoxic activity screening by NCI against 60 cell lines. Compounds 11a, 11b, 11j and 11k were the most active hybrids. Among all, compound 11j was further selected for five dose tesing and it displayed outstanding activity with strong antitumor activity against the nine tumor subpanels tested with selectivity ratios ranging from 0.019 to 8.3 at the GI50 level. Further, the most active targets 11a, b, j and k were screened for their PDE5 inhibitory activity, compound 11j (with IC50 1.57 nM) exhibited the most potent PDE5 inhibitory activity. Moreover, compound 11j is also showed moderate EGFR inhibition with IC50 of 5.827 ± 0.46 µM, but significantly inhibited the Wnt/ß-catenin pathway with IC501286.96 ± 12.37 ng/mL. In addition, compound 11j induced the intrinsic apoptotic mitochondrial pathway in HepG2 cells as evidenced by the lower expression levels of the anti-apoptotic Bcl-2 protein, and the higher expression of the pro-apoptotic protein Bax, p53, cytochrome c and the up-regulated active caspase-9 and caspase-3 levels. All results confirmed by western blotting assay. Compound 11j exhibit pre G1 apoptosis and cell cycle arrest at G2/M phase. In conclusion, hybridization of quinoline moiety with the privileged pyrazolo[3,4-d]pyrimidinon-4-one structure resulted in highly potent anticancer agent, 11j, which deserves more study, in particular, in vivo and clinical investiagtions, and it is expected that these results would be applied for more drug discovery process.

Colon-specific tablets containing 5-fluorouracil microsponges for colon cancer targeting.

Most anticancer medications undergo major first-pass metabolism in the intestinal wall, the liver, or both. 5-fluorouracil (5-FU) is known to have erratic oral bioavailability due to first-pass metabolism. The present study aimed to develop 5-FU-loaded microsponges (MS) compressed in enteric-coated tablets as a new colon targeting to colorectal cancer. MS was prepared as a controlled release system for 5-FU and characterized for drug encapsulation efficiency, and surface morphology. Further, hydroxypropyl methylcellulose (HPMC) was mixed with pectin and characterized for their flow as a tablet coat enclosing the core tablets of 5-FU-MS. Moreover, in vitro drug release behavior was studied in different pH media, while the X-ray imaging was used to monitor the in vivo movement of prepared tablets containing 5-FU-MS throughout the GI system. The results showed that MS were spherical in shape and have several pores on their surfaces. The encapsulation efficiency was from 71.80 ± 1.62% - 101.3 ± 2.60%, while the particle size was from 53.11 ± 41.03 - 118.12 ± 48.21 nm. The formulated tablets were fulfilling all official and other specifications and exhibited sustained release of 5-FU only inside the colon. The in vivo human volunteer study of X-ray has shown that the tablets ultimately reached the colon without disturbing in the upper GI system. The obtained carrier formulation is considered as a novel system to deliver 5-FU to the colon tumor with 100% targeting without any drug release in the upper GIT or first-pass metabolism.

In vitro and in vivo characterization of domperidone-loaded fast dissolving buccal films.

The delivery of drugs via fast dissolving films is an effective alternative for drugs with low bioavailability when administered by other routes. This is the case of domperidone (DMP) an anti-emetic drug with low water solubility and vulnerable to extensive first-pass effect. To overcome these limitations, in this work, we designed and produced fast dissolving muco-adhesive buccal films of domperidone using varying amount polyvinylpyrrolidone (PVP K-90) using the solvent casting method. Films loaded with more than 10% of drug were not homogenous and opaque as indicated by white patches of drug in the film matrix. Formulation of DMP in the film form resulted in conversion of the drug from crystalline state to the semi-crystalline state as indicated by X-ray powder diffraction analysis. Moreover, about 40% of drug loaded within the films was released during the first five minutes compared to only about only 6.5% of pure drug in drug dissolution assays in vitro. In vivo pharmacokinetics analysis revealed that the DMP-loaded film had higher maximum plasma concentration (Cmax) and shorter time to reach Cmax (Tmax) than a commercially available tablet formulation. In conclusion, the produced DMP buccal film formulation showed high absorption rate, rapid onset of action, and improved bioavailability compared with the conventional tablet. Our findings may support the development of novel dosage forms for the transmucosal delivery of DMP for convenient, rapid, and effective treatment of nausea and vomiting.

In vitro and in vivo characterization of fast dissolving tablets containing gliquidone-pluronic solid dispersion.

The main objective of this study is to increase the dissolution rate of gliquidone using its solid dispersions with pluronic F-68 by solvent evaporation method. The solid dispersion of the drug with pluronic at ratio 1:3 showed the highest dissolution efficiency (50.7%) after 10 min, so it was incorporated in fast dissolving tablets. Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) were used to study the interaction between gliquidone and pluronic in the solid state. The FTIR spectroscopic studies revealed no chemical interaction between the drug and pluronic, while the DSC results indicated the amorphous state of gliquidone in the solid dispersion. A 32 full factorial design was used to study the effect of varying concentrations of croscarmellose and sodium starch glycolate as superdisintegrants on the disintegration time and the percentage released after 10 min. The optimized formula showed a disintegration time of 39.1 ± 1.2 s and 85.43% ± 5.16% released after 10 min and was selected for the in-vivo studies in rabbits. The selected formula showed significant enhancement of gliquidone bioavailability, about 1.8 times compared with the commercial Glurenor tablets.

Optimization, in-vitro Release and in-vivo Evaluation of Gliquidone Nanoparticles.

The present work embarks upon increasing the dissolution rate and the bioavailability of model anti-diabetic drug, gliquidone, a sulfonylurea class drug used for treating diabetes mellitus type 2. The gliquidone nanoparticles were prepared by using anti-solvent precipitation technique in which, gliquidone solution in acetone was added at a controlled rate to an aqueous solution containing polyvinylpyrrolidone K25 (PVP K25) as stabilizer. The effect of drug concentration (X1), polymer concentration (X2) and solvent to anti-solvent ratio (X3) on particle size and dissolution was studied using Box-Behnken design. The results revealed that by decreasing the drug concentration and by increasing the stabilizer concentration and solvent/anti-solvent ratio, reduction in the size of the particles was observed. The mentioned parameters were optimised and particle of size about 175 nm was achieved. The relative dissolution rate of prepared gliquidone nanoparticles in phosphate buffer pH 7.4 was ~ 4.7 times faster than original drug at t = 45 min. Further, the gliquidone nanoparticles were characterized by scanning electron microscope (SEM), Fourier transform-infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and X-ray powder diffraction (XRD). The particles revealed to be oval in shape with stabilizer molecules on surface and exhibited decreased crystalline nature when compared to free gliquidone. Finally, the in vivo studies using gliquidone nanoparticles revealed ~ 2.5-fold increase in Cmax when taken orally in the form of hard gelatin capsules in comparison to free gliquidone. Thus, overall investigation suggests that the developed strategy of gliquidone nanoparticles possess a keen potential for exhibiting anti-diabetic effect.

Utilizing mixer torque rheometer in the prediction of optimal wet massing parameters for pellet formulation by extrusion/spheronization.

In this study, we aimed to optimize theophylline pellet formulations using a two-factor three-level full-factorial design (32) by monitoring the concentration of two pellet excipients, polyvinyl pyrrolidone K30 (PVP) binder solution (X1) and the hydrophilic excipient mannitol (X2). Their impact on pellet characteristics (responses) were evaluated. Increasing PVP concentration in the binder solution resulted in an increase in the wet mass torque value. The effect of mannitol, however, was antagonistic. Moreover, the pellet particle size was significantly influenced by the level of mannitol, PVP solution, and quadratic effect of mannitol. Mannitol significantly antagonized the pellet particle size. Furthermore, increased mannitol concentrations significantly enhanced drug dissolution rate from the pellets, whereas PVP concentration in the binder solution significantly reduced the drug dissolution rate. In conclusion, wet granulations can be controlled by monitoring the composition of the binder solution and pellet composition.

Effect of Chemical Binding of Doxorubicin Hydrochloride to Gold Nanoparticles, Versus Electrostatic Adsorption, on the In Vitro Drug Release and Cytotoxicity to Breast Cancer Cells.

PURPOSE: The selective delivery of chemotherapeutic agent to the affected area is mainly dependent on the mode of drug loading within the delivery system. This study aims to compare the physical method to the chemical method on the efficiency of loading DOX.HCl to GNPs and the specific release of the loaded drug at certain tissue. METHOD: Bifunctional polyethylene glycol with two different functionalities, the alkanethiol and the carboxyl group terminals, was synthesized. Then, DOX·HCl was covalently linked via hydrazone bond, a pH sensitive bond, to the carboxyl functional group and the produced polymer was used to prepare drug functionalized nanoparticles. Another group of GNPs was coated with carboxyl containing polymer; loading the drug into this system by the means of electrostatic adsorption. Finally, the prepared system were characterized with respect to size, shape and drug release in acetate buffer pH 5 and PBS pH 7.4 Also, the effect of DOX.HCl loaded systems on cell viability was assessed using MCF-7 breast cancer cell line. RESULTS: The prepared nanoparticles were spherical in shape, small in size and monodisperse. The release rate of the chemically bound drug in the acidic pH was higher than the electrostatically adsorbed one. Moreover, both systems show little release at pH 7.4. Finally, cytotoxicity profiles against human breast adenocarcinoma cell line (MCF-7) exhibited greater cytotoxicity of the chemically bound drug over the electrostatically adsorbed one. CONCLUSION: Chemical binding of DOX·HCl to the carboxyl group of PEG coating GNPs selectively delivers high amount of drug to tumour-affected tissue which leads to reducing the unwanted effects of the drug in the non-affected ones.

Novel gold nanoparticles coated with somatostatin as a potential delivery system for targeting somatostatin receptors.

Targeting of G-protein coupled receptors (GPCRs) like somatostatin-14 (SST-14) could have a potential interest in delivery of anti-cancer agents to tumor cells. Attachment of SST to different nano-carriers e.g. polymeric nanoparticles is limited due to the difficulty of interaction between SST itself and those nano-carriers. Furthermore, the instability problems associated with the final formulation. Attaching of SST to gold nanoparticles (AuNPs) using the positive and negative charge of SST and citrate-AuNPs could be considered a new technique to get stable non-aggregated AuNPs coated with SST. Different analyses techniques have been performed to proof the principle of coating between AuNPs and SST. Furthermore, cellular uptake studies on HCC-1806, HELA and U-87 cell lines has been investigated to show the ability of AuNPs coated SST to enter the cells via SST receptors. Dynamic light scattering (DLS) indicated a successful coating of SST on the MUA-AuNPs surface. Furthermore, all the performed analysis including DLS, SDS-PAGE and UV-VIS absorption spectra indicated a successful coating of AuNPs with SST. Cellular uptake studies on HCC-1806, HELA and U-87 cell lines showed that the number of AuNPs-SST per cell is signiflcantly higher compared to citrate-AuNPs when quantified using inductively coupled plasma spectroscopy. Moreover, the binding of AuNPs-SST to cells can be suppressed by addition of antagonist, indicating that the binding of AuNPs-SST to cells is due to receptor-specific binding. In conclusion, AuNPs could be attached to SST via adsorption to get stable AuNPs coated SST. This new formulation has a potential to target SST receptors localized in many normal and tumor cells.

Antimicrobial activity of chitosan- edible films containing a combination of carvacrol and rosemary nano-emulsion against Salmonella enterica serovar Typhimurium and Listeria monocytogenes for ground meat.

This research aimed to assess the potential of active food packaging as an innovative approach to enhance the quality of fresh food products. Specifically, our focus was on developing chitosan edible films combined with rosemary nanoemulsion (Ch-RNE) and carvacrol nano-emulsion (Ch-CNE) as effective antibacterial food packaging solutions. The efficacy of these films against artificially inoculated L. monocytogenes (NCTC 13372\ ATCC® 7644) as a Gram-positive bacterium, and S. enterica serovar Typhimurium (ATCC 14028) as a Gram-negative bacterium, in ground meat was investigated. The size of the prepared nano-emulsions was characterized using zeta sizer, FTIR and HRTEM. The MIC of both nano-emulsions against both pathogens was found to be 0.78 % and 1.56 %. Filmogenic mixtures were casted using these concentrations, which were then dried and evaluated for their physical and mechanical properties.

A proposed modification to the Kellgren and Lawrence classification for knee osteoarthritis using a compartment-specific approach.

Purpose: Since Kellgren and Lawrence (KL) originally classified knee osteoarthritis, several authors have reported varying levels of reliability and a lack of uniformity in the use of this classification system. We propose several modifications to the KL classification including the use of a compartment-specific approach that we hypothesize will lead to a better understanding of knee OA while maintaining an adequate interobserver and intraobserver reliability. Methods: We propose the addition of the lateral and skyline-view radiographs to the standard anteroposterior (AP) and lateral projections in the evaluation. Also suggest a more precise definition of the evaluated parameters; the addition of the subchondral cancellous bone as parameter of evaluation; and the assessment of medial tibiofemoral compartment (MTFC), lateral tibiofemoral compartment (LTFC) and patellofemoral compartment (PFC) separately resulting in a compartment-specific KL staging score rather than a single overall KL score. Six evaluators (two knee surgeons, two radiologists and two knee fellows) used the modified KL classification to classify 230 randomly selected knees on two separate occasions. Reliabilities were assessed by calculating Krippendorff's ⍺ coefficients. Results: Two hundred and ten knees were included for final evaluation and analyses (53% left knees; 65% females; mean age 56 years old). Average interobserver reliability was moderate for all compartments (0.51 for the MTFC; 0.51 for the LTFC; and 0.56 for the PFC). Average intraobserver reliability was substantial for all compartments (0.63 for the MTFC; 0.65 for the LTFC; and 0.7 for the PFC). Experienced evaluators showed a higher intraobserver reliability than less-experienced evaluators. Conclusions: A modified compartment-specific KL classification enables a practical and detailed description of knee OA involvement and demonstrates acceptable interobserver and intraobserver reliability. Level of Evidence: Level III.

In vitro and in vivo synergistic wound healing and anti-methicillin-resistant Staphylococcus aureus (MRSA) evaluation of liquorice-decorated silver nanoparticles.

The multi-drug resistant Staph. aureus strain, Methicillin-resistant Staphylococcus aureus (MRSA), is an emerging pathogen that could penetrate skin cuts and wounds, causing a life-threatening condition. The green biosynthesis of silver nanoparticles with liquorice extract has been demonstrated over several years for anticancer and antioxidant effects, as well as antibacterial effect against both Gram-positive and Gram-negative bacteria. The study was designed to evaluate the synergistic in vivo and in vitro wound healing and anti-MRSA activity of decorated liquorice silver nanoparticles (LD-AgNPs). The LD-AgNPs were prepared by thoroughly mixing diluted liquorice extract with AgNO3 at room temperature. The prepared nanoparticles were characterized by size measurement, IR spectroscopy, TEM imaging, and X-ray diffraction. The in vitro and in vivo antibacterial and wound healing testing were also performed. The obtained LD-AgNPs were spherical in shape and had a hydrodynamic size of about 50.16 ± 5.37 nm. Moreover, they showed potent antibacterial activity against Gram-positive and Gram-negative resistant bacteria, produced a significantly higher level of procollagen type I compared to either liquorice extract or standard silver sulfadiazine, and promoted the wound healing process in rabbits. The formulation of silver nanoparticles with liquorice extract showed synergetic effects in enhancing the treatment of wounds, with significant antibacterial activity against E. coli and MRSA.

Chitosan nanoparticles as a smart nanocarrier for gefitinib for tackling lung cancer: Design of experiment and in vitro cytotoxicity study.

Due to its poor solubility and systemic side effects, gefitinib (Gef) has limited application in treatment of lung cancer. In this study, we used design of experiment (DOE) tools to gain the necessary knowledge for the synthesis of high-quality gefitinib loaded chitosan nanoparticles (Gef-CSNPs) capable of delivering and concentrating Gef at A549 cells, thereby increasing therapeutic effectiveness while decreasing adverse effects. The optimized Gef-CSNPs were characterized by SEM, TEM, DSC, XRD, and FTIR analyses. The optimized Gef-CSNPs had a particle size of 158±3.6 nm, an entrapment efficiency of 93±1.2 %, and a release of 97±0.6 % after 8 h. The in vitro cytotoxicity of the optimized Gef-CSNPs was found to be significantly higher than pure Gef (IC50 = 10.08 ± 0.76 µg/mL and IC50 = 21.65 ± 0.32 µg/mL), respectively. In the A549 human cell line, the optimized Gef-CSNPs formula outperformed pure Gef in terms of cellular uptake (3.286 ± 0.12 µg/mL and 1.777 ± 0.1 µg/mL) and apoptotic population (64.82 ± 1.25 % and 29.38 ± 1.11 %), respectively. These findings explain why researchers are so interested in using natural biopolymers to combat lung cancer, and they paint an optimistic picture of their potential as a promising tool in the fight against lung cancer.

Hormonal and inflammatory modulatory effects of hesperidin in hyperthyroidism-modeled rats.

The goal of the current study was to investigate the hormonal modulatory efficiency of hesperidin, through its regulatory potential of immunological, inflammatory, and/or antioxidant changes in on hyperthyroidism modeled adult female albino rats. Both normal and hyperthyroidism modeled rats (140-160g) were randomly divided into four groups (10 animals each) as follows: 1) healthy animals were daily ingested with saline for six weeks, and served as control group, 2) healthy animals were intraperitoneally injected with hesperidin (50 mg/kg/day) for a similar period, 3) hyperthyroidism-modeled animals without any treatment acted as positive control, and 4) hyperthyroidism-modeled animals were treated intraperitoneally with hesperidin for a similar period. The findings showed that hesperidin significantly modulated hyperthyroidism deteriorations, this was evidenced by a remarkable decline in serum T4, FT4, T3, FT3, TNF-α, IL1ß-, IL4-, IL-6, and IL-10 levels, with a minor increase in TSH and significant raise in CD4+ level. Similarly, valuable improvement was observed in the oxidative status; serum SOD, GPx, CAT, and GSH levels were dramatically enhanced, associated with remarkable drop in MDA and NO levels. Also, hesperidin demonstrated nephro-hepatoprotective and anti-atherogenic potential, this was achieved from the notable reduction in ALAT and ASAT activities as well as urea, creatinine, cholesterol, and triglyceride close to the corresponding values of healthy group. These findings were supported by histological and immunohistochemical ones that showed a notable decrease in the expression of the calcitonin antibody. In conclusion, hesperidin possesses anti-hyperthyroidism, immunoinflammatory regulatory, and antioxidant activities that evidenced from the improvement of physio-architecture of the thyroid gland, reduction of inflammation and restoration of the impaired oxidative stress. This effect might be mechanized through immunological, inflammatory, apoptotic, and/or antioxidant modulatory pathways.

Repurposing of nifedipine loaded in situ ophthalmic gel as a novel approach for glaucoma treatment.

Glaucoma is a chronic eye disease characterized by elevated intraocular pressure (IOP) which causes severe complications to the eyes and may lead to vision loss. The effective treatment of such diseases motivated the search for novel and unique drugs and delivery systems. It has been reported that, nifedipine (NF) is effective in reducing the elevated IOP due to vasodilatation of eye vascular smooth muscles. NF loaded thermo-sensitive in situ gels were prepared by the cold method using poloxamer 407 (P407) and hydroxypropyl methyl cellulose (HPMC) polymers adopting Box-Behnken experimental design. All the prepared formulae were tested for homogeneity, clarity, pH, isotonicity, gelling capacity, rheological behavior, in vitro drug release and were tested in vivo on rabbits. The prepared in situ gels were homogenous, transparent, having a pH ranged from 5 to 5.5 and undergo sol-gel transition within few seconds physiological temperature. The in situ gels showed sustained in vitro release of NF where about 76% of the loaded drug was released over 12 h. NF loaded in situ gels showed a 45.83 ± 2.91% reduction in the IOP, with no sign of toxicity or irritation to the eye in rabbits. The current investigations clarified the efficiency of this novel and unique NF loaded in situ gel for the control of the IOP compared to the conventional ophthalmic dosage forms.