Reversed I1Cu4 single-atom sites for superior neutral ammonia electrosynthesis with nitrate.

Electrochemical ammonia (NH3) synthesis from nitrate reduction (NITRR) offers an appealing solution for addressing environmental concerns and the energy crisis. However, most of the developed electrocatalysts reduce NO3- to NH3 via a hydrogen (H*)-mediated reduction mechanism, which suffers from undesired H*-H* dimerization to H2, resulting in unsatisfactory NH3 yields. Herein, we demonstrate that reversed I1Cu4 single-atom sites, prepared by anchoring iodine single atoms on the Cu surface, realized superior NITRR with a superior ammonia yield rate of 4.36 mg h-1 cm-2 and a Faradaic efficiency of 98.5% under neutral conditions via a proton-coupled electron transfer (PCET) mechanism, far beyond those of traditional Cu sites (NH3 yield rate of 0.082 mg h-1 cm-2 and Faradaic efficiency of 36.5%) and most of H*-mediated NITRR electrocatalysts. Theoretical calculations revealed that I single atoms can regulate the local electronic structures of adjacent Cu sites in favor of stronger O-end-bidentate NO3- adsorption with dual electron transfer channels and suppress the H* formation from the H2O dissociation, thus switching the NITRR mechanism from H*-mediated reduction to PCET. By integrating the monolithic I1Cu4 single-atom electrode into a flow-through device for continuous NITRR and in situ ammonia recovery, an industrial-level current density of 1 A cm-2 was achieved along with a NH3 yield rate of 69.4 mg h-1 cm-2. This study offers reversed single-atom sites for electrochemical ammonia synthesis with nitrate wastewater and sheds light on the importance of switching catalytic mechanisms in improving the performance of electrochemical reactions.

Engineering the Coordination Environment of Ir Single Atoms with Surface Titanium Oxide Amorphization for Superior Chlorine Evolution Reaction.

The chlorine evolution reaction (CER) is essential for industrial Cl2 production but strongly relies on the use of dimensionally stable anode (DSA) with high-amount precious Ru/Ir oxide on a Ti substrate. For the purpose of sustainable development, precious metal decrement and performance improvement are highly desirable for the development of CER anodes. Herein, we demonstrate that surface titanium oxide amorphization is crucial to regulate the coordination environment of stabilized Ir single atoms for efficient and durable chlorine evolution of Ti monolithic anodes. Experimental and theoretical results revealed the formation of four-coordinated Ir1O4 and six-coordinated Ir1O6 sites on amorphous and crystalline titanium oxides, respectively. Interestingly, the Ir1O4 sites exhibited a superior CER performance, with a mass activity about 10 and 500 times those of the Ir1O6 counterpart and DSA, respectively. Moreover, the Ir1O4 anode displayed excellent durability for 200 h, far longer than that of its Ir1O6 counterpart (2 h). Mechanism studies showed that the unsaturated Ir in Ir1O4 was the active center for chlorine evolution, which was changed to the top-coordinated O in Ir1O6. This change of active sites greatly affected the adsorption energy of Cl species, thus accounting for their different CER activity. More importantly, the amorphous structure and restrained water dissociation of Ir1O4 synergistically prevent oxygen permeation across the Ti substrate, contributing to its long-term CER stability. This study sheds light on the importance of single-atom coordination structures in the reactivity of catalysts and offers a facile strategy to prepare highly active single-atom CER anodes via surface titanium oxide amorphization.

Homogeneous Vacancies-Enhanced Orbital Hybridization for Selective and Efficient CO2-to-CO Electrocatalysis.

Crafting vacancies offers an efficient route to upgrade the selectivity and productivity of nanomaterials for CO2 electroreduction. However, defective nanoelectrocatalysts bear catalytically active vacancies mostly on their surface, with the rest of the interior atoms adiaphorous for CO2-to-product conversion. Herein, taking nanosilver as a prototype, we arouse the catalytic ability of internal atoms by creating homogeneous vacancies realized via electrochemical reconstruction of silver halides. The homogeneous vacancies-rich nanosilver, compared to the surface vacancies-dominated counterpart, features a more positive d-band center to trigger an intensified hybridization of the Ag_d orbital with the C_P orbital of the *COOH intermediate, leading to an accelerated CO2-to-CO transformation. These structural and electronic merits allow a large-area (9 cm-2) electrode to generate nearly pure CO with a CO/H2 Faradaic efficiency ratio of 6932 at an applied current of 7.5 A. These findings highlight the potential of designing new-type defects in realizing the industrialization of electrocatalytic CO2 reduction.

Cobalt Single-Atom Reverse Hydrogen Spillover for Efficient Electrochemical Water Dissociation and Dechlorination.

Efficient water dissociation to atomic hydrogen (H*) with restrained recombination of H* is crucial for improving the H* utilization for electrochemical dechlorination, but is currently limited by the lack of feasible electrodes. Herein, we developed a monolithic single-atom electrode with Co single atoms anchored on the inherent oxide layer of titanium foam (Co1-TiOx/Ti), which can efficiently dissociate water into H* and simultaneously inhibit the recombination of H*, by taking advantage of the single-atom reverse hydrogen spillover effect. Experimental and theoretical calculations demonstrated that H* could be rapidly generated on the oxide layer of titanium foam, and then overflowed to the adjacent Co single atom for the reductive dechlorination. Using chloramphenicol as a proof-of-concept verification, the resulting Co1-TiOx/Ti monolithic electrode exhibited an unprecedented performance with almost 100 % dechlorination at -1.0 V, far superior to that of traditional indirect reduction-driven commercial Pd/C (52 %) and direct reduction-driven Co1-N-C (44 %). Moreover, its dechlorination rate constant of 1.64 h-1 was 4.3 and 8.6 times more active than those of Pd/C (0.38 h-1) and Co1-N-C (0.19 h-1), respectively. Our research sheds light on the rational design of hydrogen spillover-related electrocatalysts to simultaneously improve the H* generation, transfer, and utilization for environmental and energy applications.

Superior Singlet Oxygen Electrosynthesis via Neighboring Dual Molecular Oxygen Coactivation for Selective Tetracycline Detoxification.

Oxygen (O2) electroreduction offers a green approach for singlet oxygen (1O2) synthesis in wastewater contaminants detoxification. However, traditional single O2 activation on single-metal catalytic sites seriously suffers from the kinetically-unfavorable desorption of adsorbed superoxide species (•O2 -*/•OOH*). Here, we demonstrate a novel dual O2 coactivation pathway on shortened Fe1-OV-Ti sites for superior 1O2 electrosynthesis through a rapid disproportionate process between surface-confined •O2 -*/•OOH*. Theoretical calculations combined with in situ electrochemical spectroscopies demonstrated that the shortened distance between Fe single atom and adjacent unsaturated Ti atom facilitates the direct recombination of surface-confined Fe-•OOH and Ti-•OO- to yield 1O2, bypassing the formidable •O2 -*/•OOH* desorption process. Impressively, Fe1-OV-Ti could realize an excellent 1O2 electrosynthesis rate of 54.5 µmol L-1 min-1 with an outstanding 1O2 selectivity of 97.6 % under neutral condition, surpassing that of Fe1-O-Ti (27.1 µmol L-1 min-1, 91.7 %). Using tetracycline (TC) as a model pollutant, the resulting Fe1-OV-Ti electrode achieved nearly 100 % degradation in 120 min at -0.6 V, meanwhile preventing the generation of toxic intermediates. This study provides a new 1O2 electrosynthesis strategy by controlling the distance of adjacent catalytic sites for the coactivation of dual molecular oxygen.

Construction of an OCP-ATR-FTIR Spectroscopy Device to In Situ Monitor the Interfacial Reaction of Contaminants: Competitive Adsorption of Cr(VI) and Oxalate on Hematite.

The comprehensive understanding of contaminant interfacial behavior strongly depends on the in situ characterization technique, which is still a great challenge. In this study, we constructed a device integrated with open-circuit potentialand attenuated total reflectance Fourier transform infrared (OCP-ATR-FTIR) spectroscopy to simultaneously monitor the electrochemical and infrared spectral information on the interfacial reaction for the process analysis, taking the competitive adsorption of hexavalent chromium (Cr(VI)) and oxalate on hematite nanocubes (HNC) as an example. The synchronous OCP and infrared results revealed that Cr(VI) interacted with HNC via bidentate binuclear inner-sphere coordination, accompanied by electron transfer from HNC to Cr(VI), while oxalate was adsorbed on HNC through bidentate mononuclear side-on inner-sphere coordination with electron transfer from HNC to oxalate, and also outer-sphere coordination with negative charge accumulation. When oxalate was added to HNC with preadsorbed Cr(VI), oxalate would occupy the inner-sphere adsorption sites and thus cause the detaching of preadsorbed Cr(VI) from HNC. This study provides a promising in situ characterization technique for real-time interfacial reaction monitoring and also sheds light on the competitive adsorption mechanism of oxalate and Cr(VI) on the mineral surface.

Electrochemical removal of ammonium nitrogen in high efficiency and N2 selectivity using non-noble single-atomic iron catalyst.

Ammonia nitrogen (NH4+-N) is a ubiquitous environmental pollutant, especially in offshore aquaculture systems. Electrochemical oxidation is very promising to remove NH4+-N, but suffers from the use of precious metals anodes. In this work, a robust and cheap electrocatalyst, iron single-atoms distributed in nitrogen-doped carbon (Fe-SAs/N-C), was developed for electrochemical removal of NH4+-N from in wastewater containing chloride. The Fe-SAs/N-C catalyst exhibited superior activity than that of iron nanoparticles loaded carbon (Fe-NPs/N-C), unmodified carbon and conventional Ti/IrO2-TiO2-RuO2 electrodes. And high removal efficiency (> 99%) could be achieved as well as high N2 selectivity (99.5%) at low current density. Further experiments and density functional theory (DFT) calculations demonstrated the indispensable role of single-atom iron in the promoted generation of chloride derived species for efficient removal of NH4+-N. This study provides promising inexpensive catalysts for NH4+-N removal in aquaculture wastewater.

Visible Light-Driven Conversion of Carbon-Sequestrated Seawater into Stoichiometric CO and HClO with Nitrogen-Doped BiOCl Atomic Layers.

Seawater is one of the most important CO2 sequestration media for delivering value-added chemicals/fuels and active chlorine; however, this scenario is plagued by sluggish reaction rates and poor product selectivity. Herein, we first report the synthesis of nitrogen-doped BiOCl atomic layers to directly split carbon-sequestrated natural seawater (Yellow Sea, China) into stoichiometric CO (92.8 µmol h-1 ) and HClO (83.2 µmol h-1 ) under visible light with selectivities greater than 90 %. Photoelectrons enriched on the exposed BiOCl{001} facet kinetically facilitate CO2 -to-CO reduction via surface-doped nitrogen bearing Lewis basicity. Photoholes, mainly located on the lateral facets of van der Waals gaps, promote the selective oxidation of Cl- into HClO. Sequestrated CO2 also maintains the pH of seawater at around 4.2 to prevent the alkaline earth cations from precipitating. The produced HClO can effectively kill typical bacteria in the ballast water of ocean-going cargo ships, offering a green and safe way for onsite sterilization.

Single Atom Ru Monolithic Electrode for Efficient Chlorine Evolution and Nitrate Reduction.

Fabricating single-atom electrodes via atomic dispersion of active metal atoms into monolithic metal supports is of great significance to advancing the lab-to-fab translation of the electrochemical technologies. Here, we report an inherent oxide anchoring strategy to fasten ligand-free isolated Ru atoms on the amorphous layer of monolithic Ti support by regulating the electronic metal-support interactions. The prepared Ru single atom electrode exhibited exceptional electrochemical chlorine evolution activity, three orders of magnitude higher mass activity than that of commercial dimensionally stable anode, and also selectively reduced nitrate to ammonia with an unprecedented ammonia yield rate of 22.2 mol g-1 h-1 at -0.3 V. Furthermore, the Ru single atom monolithic electrode can be scaled up from 2×2 cm to 25×15 cm at least, thus demonstrating great potential for industrial electrocatalytic applications.

Atomic-Layered Cu5 Nanoclusters on FeS2 with Dual Catalytic Sites for Efficient and Selective H2 O2 Activation.

Regulating the distribution of reactive oxygen species generated from H2 O2 activation is the prerequisite to ensuring the efficient and safe use of H2 O2 in the chemistry and life science fields. Herein, we demonstrate that constructing a dual Cu-Fe site through the self-assembly of single-atomic-layered Cu5 nanoclusters onto a FeS2 surface achieves selective H2 O2 activation with high efficiency. Unlike its unitary Cu or Fe counterpart, the dual Cu-Fe sites residing at the perimeter zone of the Cu5 /FeS2 interface facilitate H2 O2 adsorption and barrierless decomposition into ⋅OH via forming a bridging Cu-O-O-Fe complex. The robust in situ formation of ⋅OH governed by this atomic-layered catalyst enables the effective oxidation of several refractory toxic pollutants across a broad pH range, including alachlor, sulfadimidine, p-nitrobenzoic acid, p-chlorophenol, p-chloronitrobenzene. This work highlights the concept of building a dual catalytic site in manipulating selective H2 O2 activation on the surface molecular level towards efficient environmental control and beyond.

Efficient Ammonia Electrosynthesis from Nitrate on Strained Ruthenium Nanoclusters.

The limitations of the Haber-Bosch reaction, particularly high-temperature operation, have ignited new interests in low-temperature ammonia-synthesis scenarios. Ambient N2 electroreduction is a compelling alternative but is impeded by a low ammonia production rate (mostly <10 mmol gcat-1 h-1), a small partial current density (<1 mA cm-2), and a high-selectivity hydrogen-evolving side reaction. Herein, we report that room-temperature nitrate electroreduction catalyzed by strained ruthenium nanoclusters generates ammonia at a higher rate (5.56 mol gcat-1 h-1) than the Haber-Bosch process. The primary contributor to such performance is hydrogen radicals, which are generated by suppressing hydrogen-hydrogen dimerization during water splitting enabled by the tensile lattice strains. The radicals expedite nitrate-to-ammonia conversion by hydrogenating intermediates of the rate-limiting steps at lower kinetic barriers. The strained nanostructures can maintain nearly 100% ammonia-evolving selectivity at >120 mA cm-2 current densities for 100 h due to the robust subsurface Ru-O coordination. These findings highlight the potential of nitrate electroreduction in real-world, low-temperature ammonia synthesis.

Dechlorination-Hydroxylation of Atrazine to Hydroxyatrazine with Thiosulfate: A Detoxification Strategy in Seconds.

Hydroxylation of atrazine to nontoxic hydroxyatrazine is generally considered an efficient detoxification method to remediate atrazine-contaminated soil and water. However, previous studies suggested that hydroxylation was not the dominant pathway for atrazine degradation in the hydroxyl radical-generating systems such as Fenton reaction, ozonation and UV/H2O2. Herein we report that the addition of sodium thiosulfate can realize rapid hydroxylation of atrazine to hydroxyatrazine at pH ≤ 4 under room temperature. High resolution mass spectra and isotope experiments results revealed that the hydroxylation of atrazine was involved with nucleophilic substitution and subsequent hydrolysis reaction as follows. HS2O3-, as a species of thiosulfate only at pH ≤ 4, first attacked C atom connecting to chlorine of atrazine to dechlorinate atrazine and produce C8H14N5S2O3-. Subsequently, the S-S bond of C8H14N5S2O3- was cleaved easily to form SO3 and C8H14N5S-. Next, C8H14N5S- was hydrolyzed to generate hydroxyatrazine and H2S. Finally, the comproportionation of SO3 and H2S in situ produced S0 during hydroxylation of atrazine with thiosulfate. This study clarifies the importance of degradation pathway on the removal of pollutants, and also provides a nonoxidative strategy for atrazine detoxification in seconds.

Solar Water Splitting and Nitrogen Fixation with Layered Bismuth Oxyhalides.

Hydrogen and ammonia are the chemical molecules that are vital to Earth's energy, environmental, and biological processes. Hydrogen with renewable, carbon-free, and high combustion-enthalpy hallmarks lays the foundation of next-generation energy source, while ammonia furnishes the building blocks of fertilizers and proteins to sustain the lives of plants and organisms. Such merits fascinate worldwide scientists in developing viable strategies to produce hydrogen and ammonia. Currently, at the forefronts of hydrogen and ammonia syntheses are solar water splitting and nitrogen fixation, because they go beyond the high temperature and pressure requirements of methane stream reforming and Haber-Bosch reaction, respectively, as the commercialized hydrogen and ammonia production routes, and inherit the natural photosynthesis virtues that are green and sustainable and operate at room temperature and atmospheric pressure. The key to propelling such photochemical reactions lies in searching photocatalysts that enable water splitting into hydrogen and nitrogen fixation to make ammonia efficiently. Although the past 40 years have witnessed significant breakthroughs using the most widely studied TiO2, SrTiO3, (Ga1-xZnx)(N1-xOx), CdS, and g-C3N4 for solar chemical synthesis, two crucial yet still unsolved issues challenge their further progress toward robust solar water splitting and nitrogen fixation, including the inefficient steering of electron transportation from the bulk to the surface and the difficulty of activating the N≡N triple bond of N2. This Account details our endeavors that leverage layered bismuth oxyhalides as photocatalysts for efficient solar water splitting and nitrogen fixation, with a focus on addressing the above two problems. We first demonstrate that the layered structures of bismuth oxyhalides can stimulate an internal electric field (IEF) that is capable of efficiently separating electrons and holes after their formation and of precisely channeling their migration from the bulk to the surface along the different directions, thus enabling more electrons to reach the surface for water splitting and nitrogen fixation. Simultaneously, their oxygen termination feature and the strain differences between interlayers and intralayers render the easy generation of surface oxygen vacancies (OVs) that afford Lewis-base and unsaturated-unsaturated sites for nitrogen activation. With these rationales as the guideline, we can obtain striking visible-light hydrogen- and ammonia-evolving rates without using any noble-metal cocatalysts. Then we show how to utilize IEF and OV based strategies to improve the solar water splitting and nitrogen fixation performances of bismuth oxyhalide photocatalysts. Finally, we highlight the challenges remaining in using bismuth oxyhalides for solar hydrogen and ammonia syntheses, and the prospect of further development of this research field. We believe that our mechanistic insights could serve as a blueprint for the design of more efficient solar water splitting and nitrogen fixation systems, and layered bismuth oxyhalides might open up new photocatalyst paradigm for such two solar chemical syntheses.

Visible Light Driven Organic Pollutants Degradation with Hydrothermally Carbonized Sewage Sludge and Oxalate Via Molecular Oxygen Activation.

Converting sewage sludge into functional environmental materials has become an attractive sewage sludge disposal route. In this study, we synthesize a sewage sludge-based material via a facile one-pot hydrothermal carbonization method and construct a visible light molecular oxygen activation system with hydrothermally carbonized sewage sludge (HTC-S) and oxalate to degrade various organic pollutants. It was found that iron species of HTC-S could chelate with oxalate to generate H2O2 via molecular oxygen activation under visible light, and also promote the H2O2 decomposition to produce •OH for the fast organic pollutants degradation. Taking sulfadimidine as the example, the apparent degradation rate of HTC-S/oxalate system was almost 5-20 times that of iron oxides/oxalate system. This outstanding degradation performance was attributed to the presence of iron-containing clay minerals in HTC-S, as confirmed by X-ray diffraction measurements and Mössbauer spectrometry. In the oxalate solution, these iron-containing clay minerals could be excited more easily than common iron oxides under visible light, because the silicon species strongly interacted with iron species in HTC-S to form Fe-O-Si bond, which lowered the excitation energy of Fe-oxalate complex. This work provides an alternative sewage sludge conversion pathway and also sheds light on the environmental remediation applications of sewage sludge-based materials.

Monodispersed and Organic Amine Modified La(OH)3 Nanocrystals for Superior Advanced Phosphate Removal.

Advanced phosphate removal is critical for alleviating the serious and widespread aquatic eutrophication, strongly depending on the development of superior adsorption materials to overcome low chemical affinity and sluggish mass transfer at low phosphate concentrations. Herein, the first synthesis of monodispersed and organic amine modified lanthanum hydroxide nanocrystals (OA-La(OH)3) for advanced phosphate removal by modulating inner Helmholtz plane (IHP), is reported. These OA-La(OH)3 nanocrystals with positively charged surfaces and abundant exposed La sites exhibit specific affinity toward phosphate, delivering a maximum adsorption capacity of 168 mg P g⁻1 and a wide pH adaptability from 3.0 to 11.0, as well as a robust anti-interference performance, far surpassing those of documented phosphate removal materials. The superior phosphate removal performance of OA-La(OH)3 is attributed to its protonated organic amine in IHP, which enhances the electrostatic attraction around the adsorbent-solution interface. Impressively, OA-La(OH)3 can treat ≈5 000 and ≈3 200 bed volumes of simulated and real phosphate-containing wastewater to below extremely strict standard (0.1 mg L⁻1) in a fixed-bed adsorption mode, exhibiting great potential for advanced phosphate removal. This study offers a facile modification strategy to improve phosphate removal performance of nanoscale adsorbents, and sheds light on the structure-reactivity relationship of La-based materials.

Highly selective urea electrooxidation coupled with efficient hydrogen evolution.

Electrochemical urea oxidation offers a sustainable avenue for H2 production and wastewater denitrification within the water-energy nexus; however, its wide application is limited by detrimental cyanate or nitrite production instead of innocuous N2. Herein we demonstrate that atomically isolated asymmetric Ni-O-Ti sites on Ti foam anode achieve a N2 selectivity of 99%, surpassing the connected symmetric Ni-O-Ni counterparts in documented Ni-based electrocatalysts with N2 selectivity below 55%, and also deliver a H2 evolution rate of 22.0 mL h-1 when coupled to a Pt counter cathode under 213 mA cm-2 at 1.40 VRHE. These asymmetric sites, featuring oxygenophilic Ti adjacent to Ni, favor interaction with the carbonyl over amino groups in urea, thus preventing premature resonant C⎓N bond breakage before intramolecular N-N coupling towards N2 evolution. A prototype device powered by a commercial Si photovoltaic cell is further developed for solar-powered on-site urine processing and decentralized H2 production.

Single Mn atom modulated molecular oxygen activation over TiO2 for photocatalytic formaldehyde oxidation.

In single-atom catalysts, the atomically dispersed metal sites are pivotal for oxygen molecule activation. We hypothesize that dispersing single Mn atoms on TiO2 nanosheets may improve the photocatalytic oxidation of formaldehyde (HCHO) in the gas phase under ambient conditions. Density function theory (DFT) and experimental experiments were carried out to single Mn atoms not only improved the transfer of localized electrons and photogenerated electrons but also enhanced the activation/dissociation of O2 to generate monoatomic oxygen ions (O-) as the final reactive oxygen species (ROS). In photocatalytic experiments, Mn/TiO2 photocatalyst removed 100 % of HCHO at a low concentration of 7.6 ppm, and reaching excellent mineralization efficiency of over 99.6 %. According to the proposed reaction mechanism, O2 spontaneously adsorbs onto the Mn/TiO2 surface, forming two adsorbed O- after electron donation into the π2p* antibonding orbitals of O2. The adsorbed O- then reacts with gaseous HCHO to produce the key intermediate dioxymethylene (DOM), finally fulfilling a more favorable oxidation process on the Mn/TiO2 surface. This research illustrates the key role of O- in HCHO oxidation and paves the way for practical HCHO removal using TiO2-based photocatalysts.

Spin polarized Fe1-Ti pairs for highly efficient electroreduction nitrate to ammonia.

Electrochemical nitrate reduction to ammonia offers an attractive solution to environmental sustainability and clean energy production but suffers from the sluggish *NO hydrogenation with the spin-state transitions. Herein, we report that the manipulation of oxygen vacancies can contrive spin-polarized Fe1-Ti pairs on monolithic titanium electrode that exhibits an attractive NH3 yield rate of 272,000 µg h-1 mgFe-1 and a high NH3 Faradic efficiency of 95.2% at -0.4 V vs. RHE, far superior to the counterpart with spin-depressed Fe1-Ti pairs (51000 µg h-1 mgFe-1) and the mostly reported electrocatalysts. The unpaired spin electrons of Fe and Ti atoms can effectively interact with the key intermediates, facilitating the *NO hydrogenation. Coupling a flow-through electrolyzer with a membrane-based NH3 recovery unit, the simultaneous nitrate reduction and NH3 recovery was realized. This work offers a pioneering strategy for manipulating spin polarization of electrocatalysts within pair sites for nitrate wastewater treatment.

Raman spectroscopic and microscopic monitoring of on-site and in-situ remediation dynamics in petroleum contaminated soil and groundwater.

The mechanistic study of soil and groundwater remediation in petroleum contaminated lands significantly demands rapid qualitative and quantitative identification of petroleum substances. However, most traditional detection methods cannot provide the on-site or in-situ information of petroleum compositions and contents simultaneously even with multi-spot sampling and complex sample preparation. In this work, we developed a strategy for the on-site detection of petroleum compositions and in-situ monitoring of petroleum contents in soil and groundwater using dual-excitation Raman spectroscopy and microscopy. The detection time was 0.5 h for the Extraction-Raman spectroscopy method and one minute for the Fiber-Raman spectroscopy method. The limit of detection was 94 ppm for the soil samples and 0.46 ppm for the groundwater samples. Meanwhile, the petroleum changes at the soil-groundwater interface were successfully observed by Raman microscopy during the in-situ chemical oxidation remediation processes. The results revealed that hydrogen peroxide oxidation released petroleum from the interior to the surface of soil particles and then to groundwater during the remediation process, while persulfate oxidation only degraded petroleum on the soil surface and in groundwater. This Raman spectroscopic and microscopic method can shed light on the petroleum degradation mechanism in contaminated lands, and facilitate the selection of suitable soil and groundwater remediation plans.

Scalable Edge-Oriented Metallic Two-Dimensional Layered Cu2Te Arrays for Electrocatalytic CO2 Methanation.

Copper-based nanomaterials are compelling for high-efficient, low-cost electrocatalytic CO2 reduction reaction (CO2RR) due to their exotic electronic and structural properties. However, controllable preparation of copper-based two-dimensional (2D) materials with abundant catalytically active sites, that guarantee high CO2RR performance, remains challenging, especially on a large scale. Here, an in situ vertical growth of scalable metallic 2D Cu2Te nanosheet arrays on commercial copper foils is demonstrated for efficient CO2-to-CH4 electrocatalysis. The edge-oriented growth of Cu2Te nanosheets with tunable sizes and thicknesses is facilely attained by a two-step process of chemical etching and chemical vapor deposition. These active sites abounding on highly exposed edges of Cu2Te nanosheets greatly promote the electroreduction of CO2 into CH4 at a potential as low as -0.4 V (versus the reversible hydrogen electrode), while suppressing hydrogen evolution reaction. When a flow cell is employed to accelerate the mass transfer, the faradaic efficiency reaches ∼63% at an applied current density of 300 mA cm-2. These findings will provide great possibilities for developing scalable, energy-efficient Cu-based CO2RR electrocatalysts.