Intrinsic toughening and stable crack propagation in hexagonal boron nitride.

If a bulk material can withstand a high load without any irreversible damage (such as plastic deformation), it is usually brittle and can fail catastrophically1,2. This trade-off between strength and fracture toughness also extends into two-dimensional materials space3-5. For example, graphene has ultrahigh intrinsic strength (about 130 gigapascals) and elastic modulus (approximately 1.0 terapascal) but is brittle, with low fracture toughness (about 4 megapascals per square-root metre)3,6. Hexagonal boron nitride (h-BN) is a dielectric two-dimensional material7 with high strength (about 100 gigapascals) and elastic modulus (approximately 0.8 terapascals), which are similar to those of graphene8. Its fracture behaviour has long been assumed to be similarly brittle, subject to Griffith's law9-14. Contrary to expectation, here we report high fracture toughness of single-crystal monolayer h-BN, with an effective energy release rate up to one order of magnitude higher than both its Griffith energy release rate and that reported for graphene. We observe stable crack propagation in monolayer h-BN, and obtain the corresponding crack resistance curve. Crack deflection and branching occur repeatedly owing to asymmetric edge elastic properties at the crack tip and edge swapping during crack propagation, which intrinsically toughens the material and enables stable crack propagation. Our in situ experimental observations, supported by theoretical analysis, suggest added practical benefits and potential new technological opportunities for monolayer h-BN, such as adding mechanical protection to two-dimensional devices.

Revealing and Manipulating Hidden Fine-Structure Coherence of Bright Excitons in CsPbI3 Perovskite Quantum Dots.

Observation and understanding of fine-structure splitting of bright excitons in lead halide perovskite quantum dots (QDs) are crucial to their emerging applications in quantum light sources and exciton coherence manipulation. Recent studies demonstrate that ensemble-level polarization-resolved transient absorption spectroscopy can reveal the quantum beats arising from the coherence between two fine-structure levels. Here we report the observation of an extra fine-structure quantum coherence hidden in previous studies by using cryo-magnetic quantum beat spectroscopy. In ∼6 nm CsPbI3 QDs, two splitting energies of 0.25 and 1.20 meV were observed at 1.7 K, which gradually increased to 0.74 and 1.55 meV, respectively, when a longitudinal magnetic field up to 7 T was applied. The field dependence allowed us to extract two distinct nominal Landé g-factors corresponding to QDs with different orientations with respect to the external field.

Spatially Resolved Anion Diffusion and Tunable Waveguides in Bismuth Halide Perovskites.

Bismuth halide perovskites are widely regarded as nontoxic alternatives to lead halide perovskites for optoelectronics and solar energy harvesting applications. With a tailorable composition and intriguing optical properties, bismuth halide perovskites are also promising candidates for tunable photonic devices. However, robust control of the anion composition in bismuth halide perovskites remains elusive. Here, we established chemical vapor deposition and anion exchange protocols to synthesize bismuth halide perovskite nanoflakes with controlled dimensions and variable compositions. In particular, we demonstrated the gradient bromide distribution by controlling the anion exchange and diffusion processes, which is spatially resolved by time-of-flight secondary ion mass spectrometry. Moreover, the optical waveguiding properties of bismuth halide perovskites can be modulated by flake thicknesses and anion compositions. With a unique gradient anion distribution and controllable optical properties, bismuth halide perovskites provide new possibilities for applications in optoelectronic devices and integrated photonics.

Significance of neutrophil extracellular traps-related gene in the diagnosis and classification of atherosclerosis.

Atherosclerosis (AS) is a pathological process associated with various cardiovascular diseases. Upon different stimuli, neutrophils release reticular complexes known as neutrophil extracellular traps (NETs). Numerous researches have indicated a strong correlation between NETs and AS. However, its role in cardiovascular disease requires further investigation. By utilizing a machine learning algorithm, we examined the genes associated with NETs that were expressed differently in individuals with AS compared to normal controls. As a result, we identified four distinct genes. A nomogram model was built to forecast the incidence of AS. Additionally, we conducted analysis on immune infiltration, functional enrichment and consensus clustering in AS samples. The findings indicated that individuals with AS could be categorized into two groups, exhibiting notable variations in immune infiltration traits among the groups. Furthermore, to measure the NETs model, the principal component analysis algorithm was developed and cluster B outperformed cluster A in terms of NETs. Additionally, there were variations in the expression of multiple chemokines between the two subtypes. By studying AS NETs, we acquired fresh knowledge about the molecular patterns and immune mechanisms implicated, which could open up new possibilities for AS immunotherapy.

The novel miR-873-5p-YWHAE-PI3K/AKT axis is involved in non-small cell lung cancer progression and chemoresistance by mediating autophagy.

Non-small cell lung cancer (NSCLC) encompasses approximately 85% of all lung cancer cases and is the foremost cancer type worldwide; it is prevalent in both sexes and known for its high fatality rate. Expanding scientific inquiry underscores the indispensability of microRNAs in NSCLC. Here, we probed the impact of miR-873-5p on NSCLC development and chemoresistance. qRT‒PCR was used to measure the miR-873-5p level in NSCLC cells with or without chemoresistance. A model of miR-873-5p overexpression was constructed. The proliferation and viability of NSCLC cells were evaluated through CCK8 and colony formation experiments. Cell migration and invasion were monitored via Transwell assays. Western blotting was used to determine the levels of YWHAE, PI3K, AKT, EMT, apoptosis, and autophagy-related proteins. The sensitivity of NSCLC cells to the chemotherapeutic agent gefitinib was assessed. Additionally, the correlation of YWHAE with miR-873-5p was validated via a dual-luciferase reporter assay and RNA immunoprecipitation (RIP). Overexpressed miR-873-5p suppressed migration, proliferation, invasion, and EMT while concurrently stimulating apoptotic processes. miR-873-5p was downregulated in NSCLC cells resistant to gefitinib. Upregulating miR-873-5p reversed gefitinib resistance by inducing autophagy. YWHAE was confirmed to be a downstream target of miR-873-5p. YWHAE overexpression promoted the malignant behaviors of NSCLC cells and boosted tumor growth, while these effects were reversed following miR-873-5p overexpression. Subsequent investigations revealed that overexpressing YWHAE promoted PI3K/AKT pathway activation, with miR-873-5p displaying inhibitory effects on the YWHAE-mediated PI3K/AKT signaling cascade. miR-873-5p affects proliferation, invasion, migration, EMT, autophagy, and chemoresistance in NSCLC by controlling the YWHAE/PI3K/AKT axis.

3D Printing of Metals with sub-10 µm Resolution.

The ability to manufacture 3D metallic architectures with microscale resolution is greatly pursued because of their diverse applications in microelectromechanical systems (MEMS) including microelectronics, mechanical metamaterials, and biomedical devices. However, the well-developed photolithography and emerging metal additive manufacturing technologies have limited abilities in manufacturing micro-scaled metallic structures with freeform 3D geometries. Here, for the first time, the high-fidelity fabrication of arbitrary metallic motifs with sub-10 µm resolution is achieved by employing an embedded-writing embedded-sintering (EWES) process. A paraffin wax-based supporting matrix with high thermal stability is developed, which permits the printed silver nanoparticle ink to be pre-sintered at 175 °C to form metallic green bodies. Via carefully regulating the matrix components, the printing resolution is tuned down to ≈7 µm. The green bodies are then embedded in a supporting salt bath and further sintered to realize freeform 3D silver motifs with great structure fidelity. 3D printing of various micro-scaled silver architectures is demonstrated such as micro-spring arrays, BCC lattices, horn antenna, and rotatable windmills. This method can be extended to the high-fidelity 3D printing of other metals and metal oxides which require high-temperature sintering, providing the pathways toward the design and fabrication of 3D MEMS with complex geometries and functions.

Modifying single-crystal silicon and trimming silicon microring devices by femtosecond laser irradiation.

Single-crystal silicon (c-Si) is a vital component of photonic devices and has obvious advantages. Moreover, femtosecond-pulsed laser interactions with matter have been widely applied in micro/nanoscale processing. In this paper, we report the modification mechanisms of c-Si induced by a femtosecond laser (350 fs, 520 nm) at different pulse fluences, along with the mechanism of this technique to trim the phase error of c-Si-based devices. In this study, several distinct types of final micro/nanostructures, such as amorphization and ablation, were analyzed. The near-surface morphology was characterized using optical microscopy, scanning electron microscopy, and atomic force microscopy. The main physical modification processes were further analyzed using a two-temperature model. By employing Raman spectroscopy, we demonstrated that a higher laser fluence significantly contributes to the formation of more amorphous silicon components. The thickness of the amorphous layer was almost uniform (approximately 30 nm) at different induced fluences, as determined using transmission electron microscopy. From the ellipsometry measurements, we demonstrated that the refractive index increases for amorphization while the ablation decreases. In addition, we investigated the ability of the femtosecond laser to modify the effective index of c-Si microring waveguides by either amorphization or ablation. Both blue and red shifts of resonance spectra were achieved in the microring devices, resulting in double-direction trimming. Our results provide further insight into the femtosecond laser modification mechanism of c-Si and may be a practical method for dealing with the fabrication errors of c-Si-based photonic devices.

Statistical characteristics of large-scale objective tonic-clonic seizure records from medical smartwatches used in daily life.

OBJECTIVE: This study aimed to assess whether population-level patterns in seizure occurrence previously observed in self-reported diaries, medical records, and electroencephalographic recordings were also present in tonic-clonic seizure (TCS) diaries produced via the combined input of a US Food and Drug Administration-cleared wristband with an artificial intelligence detection algorithm and patient self-reports. We also investigated the characteristics of patient interactions with wearable seizure alerts. METHODS: We analyzed wristband data from patients with TCSs who had at least three reported TCSs over a minimum of 90 days. We quantified TCS frequency and cycles, and the relationship between the mean and variability of monthly TCS counts. We also assessed interaction metrics such as false alarm dismissal and seizure confirmation rates. RESULTS: Applying strict criteria for usable data, we reviewed 137 490 TCSs from 3012 patients, with a median length of TCS alert records of 445 days (range = 90-1806). Analyses showed consistency between prior diary studies and the present data concerning (1) the distribution of monthly TCS frequency (median = 3.1, range = .08-26); (2) the linear relationship (slope = .79, R2 = .83) between the logarithm of the mean and the logarithm of the SD of monthly TCS frequency (L-relationship); and (iii) the prevalence of multiple coexisting seizure cycles, including circadian (84.0%), weekly (24.6%), and long-term cycles (31.1%). SIGNIFICANCE: Key population-level patterns in seizure occurrence are recapitulated in wrist-worn device recordings, supporting their validity for tracking TCS burden. Compared to other approaches, wearables can provide noninvasive, objective, long-term data, revealing cycles in seizure risk. However, improved patient engagement with wristband alerts and further validation of detection accuracy in ambulatory settings are needed. Together, these findings suggest that data from smart wristbands may be used to derive features of TCS records and, ultimately, facilitate remote monitoring and the development of personalized forecasting tools for TCS management. Our findings may not generalize to other types of seizures.

Non-Cell-Autonomous Regulation of Prostate Epithelial Homeostasis by Androgen Receptor.

Prostate inflammation has been suggested as an etiology for benign prostatic hyperplasia (BPH). We show that decreased expression of the androgen receptor (AR) in luminal cells of human BPH specimens correlates with a higher degree of regional prostatic inflammation. However, the cause-and-effect relationship between the two events remains unclear. We investigated specifically whether attenuating AR activity in prostate luminal cells induces inflammation. Disrupting luminal cell AR signaling in mouse models promotes cytokine production cell-autonomously, impairs epithelial barrier function, and induces immune cell infiltration, which further augments local production of cytokines and chemokines including Il-1 and Ccl2. This inflammatory microenvironment promotes AR-independent prostatic epithelial proliferation, which can be abolished by ablating IL-1 signaling or depleting its major cellular source, the macrophages. This study demonstrates that disrupting luminal AR signaling promotes prostate inflammation, which may serve as a mechanism for resistance to androgen-targeted therapy for prostate-related diseases.

CT-based measurement and analysis of distal humerus morphology in healthy adults from Northern China.

BACKGROUND: This study aims to investigate the morphological characteristics of the distal humerus in healthy adults from northern China using computed tomography and three-dimensional reconstruction techniques and compared whether there were diferences in morphology among populations from diferent geographical regions. METHODS: The CT data of 80 patients were imported into Mimics software for three-dimensional reconstruction and measurement. The differences in distal humeral morphological parameters between different genders and sides were compared, and the correlation between the parameters was explored. The distal humeral morphological parameters between Western and Chinese populations based on current and previous pooled results were compared. RESULTS: Thirty-one morphological parameters were measured and analyzed in this study. The average (and standard deviation) of capitellum depth, capitellum width, capitellum height, distal humerus width, epitrochlea width, and humeral metaphyseal width was 10.83 ± 1.18 mm, 17.60 ± 2.06 mm, 21.10 ± 2.03 mm, 44.38 ± 4.07 mm, 12.02 ± 1.90 mm and 58.95 ± 4.86 mm, these parameters were significantly higher (P < 0.001*) in males than females. The capitellum width (r = -0.300, P = 0.007*), anterior lateral trochlear depth (r =-0.227, P = 0.043*), medial crest coronal tangential angle (r = 0.307, P = 0.006*), olecranon fossa volume (r = -0.408, P < 0.001*), olecranon fossa surface area (r = -0.345, P = 0.002*) and coronoid fossa surface area (r = -0.279, P = 0.012*) were significantly correlated with the age of the subjects. In the comparison of people from different regions, the capitellum height, lateral trochlear high, trochlear groove high, trochlear depth and medial trochlear high of the Western population were 23.25 ± 2.56 m, 21.6 ± 2.20 mm, 17.8 ± 2.00 mm, 17.80 ± 2.00 mm, 29.9 ± 4.10 mm, are significantly higher than those in the Chinese population. while capitellum width (15.55 ± 2.68 mm) and capitellum depth (9.00 ± 1.00 mm) were slightly lower. CONCLUSION: The findings provide a basis for the design of distal humeral orthopaedic implants, ensuring greater alignment with the anatomical structure of the distal humerus and improved surgical outcomes. Furthermore, the study provides a reference point for the diagnosis and classification of distal humeral diseases, as well as guidance for patient rehabilitation.

Causal relationship between gut microbiota and functional outcomes after ischemic stroke: A comprehensive Mendelian randomization study.

AIMS: To investigate the association of the genetic predisposition of specific gut microbiotas with the clinical outcome of ischemic stroke. METHODS: We leveraged publicly available genome-wide association study (GWAS) data to perform Mendelian randomization (MR) analysis. The gut microbiota-related GWAS data from 18,340 individuals from the international consortium MiBioGen was used. The summary data for functional outcomes after ischemic stroke was obtained from the Genetics of Ischemic Stroke Functional Outcome (GISCOME) network meta-analysis. The primary outcomes were judged by the modified Rankin Scale (mRS). The principal analyses were conducted using the inverse-variance weighted (IVW) MR method. The Cochran's Q test, weighted median, MR-Egger regression, leave-one-SNP-out analysis, MR-Pleiotropy Residual Sum, and Outlier methods were adopted as sensitivity analyses. Furthermore, we performed bi-directional MR analysis and the MR Steiger directionality test to examine the direction of the causal relations. RESULTS: The results demonstrated that the genetic predisposition of genus Lactococcus, genus Ruminococcaceae NK4A214 group, family Peptostreptococcaceae, and genus Odoribacter was positively associated with favorable functional outcome after ischemic stroke. Genus Collinsella, genus Ruminococcaceae UCG005, genus Akkermansia, genus Eubacterium oxidoreducens group, and family Verrucomicrobiaceae were identified to be associated with worse functional outcomes after ischemic stroke. Our results showed no evidence of heterogeneity, directional pleiotropic effects, or collider bias, and the sensitivity of our analysis was acceptable. CONCLUSION: The genetic predisposition of different gut microbiotas was associated with the clinical outcome of ischemic stroke. Microbiota adjustment was a promising method to improve the clinical outcome of ischemic stroke.

Oxytocin and the Punitive Hub-Dynamic Spread of Cooperation in Human Social Networks.

Human society operates on large-scale cooperation. However, individual differences in cooperativeness and incentives to free ride on others' cooperation make large-scale cooperation fragile and can lead to reduced social welfare. Thus, how individual cooperation spreads through human social networks remains puzzling from ecological, evolutionary, and societal perspectives. Here, we identify oxytocin and costly punishment as biobehavioral mechanisms that facilitate the propagation of cooperation in social networks. In three laboratory experiments (n = 870 human participants: 373 males, 497 females), individuals were embedded in heterogeneous networks and made repeated decisions with feedback in games of trust (n = 342), ultimatum bargaining (n = 324), and prisoner's dilemma with punishment (n = 204). In each heterogeneous network, individuals at central positions (hub nodes) were given intranasal oxytocin (or placebo). Giving oxytocin (vs matching placebo) to central individuals increased their trust and enforcement of cooperation norms. Oxytocin-enhanced norm enforcement, but not elevated trust, explained the spreading of cooperation throughout the social network. Moreover, grounded in evolutionary game theory, we simulated computer agents that interacted in heterogeneous networks with central nodes varying in terms of cooperation and punishment levels. Simulation results confirmed that central cooperators' willingness to punish noncooperation allowed the permeation of the network and enabled the evolution of network cooperation. These results identify an oxytocin-initiated proximate mechanism explaining how individual cooperation facilitates network-wide cooperation in human society and shed light on the widespread phenomenon of heterogeneous composition and enforcement systems at all levels of life.SIGNIFICANCE STATEMENT Human society operates on large-scale cooperation. Yet because cooperation is exploitable by free riding, how cooperation in social networks emerges remains puzzling from evolutionary and societal perspectives. Here we identify oxytocin and altruistic punishment as key factors facilitating the propagation of cooperation in human social networks. Individuals played repeated economic games in heterogeneous networks where individuals at central positions were given oxytocin or placebo. Oxytocin-enhanced cooperative norm enforcement, but not elevated trust, explained cooperation spreading throughout the social network. Evolutionary simulations confirmed that central cooperators' willingness to punish noncooperation allowed the permeation of the network and enabled the evolution of cooperation. These results identify an oxytocin-initiated proximate mechanism explaining how individual cooperation facilitates network-wide cooperation in human social networks.

Predicting the fine-scale spatial distribution of zoonotic reservoirs using computer vision.

Zoonotic diseases threaten human health worldwide and are often associated with anthropogenic disturbance. Predicting how disturbance influences spillover risk is critical for effective disease intervention but difficult to achieve at fine spatial scales. Here, we develop a method that learns the spatial distribution of a reservoir species from aerial imagery. Our approach uses neural networks to extract features of known or hypothesized importance from images. The spatial distribution of these features is then summarized and linked to spatially explicit reservoir presence/absence data using boosted regression trees. We demonstrate the utility of our method by applying it to the reservoir of Lassa virus, Mastomys natalensis, within the West African nations of Sierra Leone and Guinea. We show that, when trained using reservoir trapping data and publicly available aerial imagery, our framework learns relationships between environmental features and reservoir occurrence and accurately ranks areas according to the likelihood of reservoir presence.

Time-of-Flight Intracranial MRA at 3 T versus 5 T versus 7 T: Visualization of Distal Small Cerebral Arteries.

Background Three-dimensional (3D) time-of-flight (TOF) MR angiography (MRA) at 7 T has been reported to have high image quality for visualizing small perforating vessels. However, B1 inhomogeneity and more physiologic considerations limit its applications. Angiography at 5 T may provide another choice for intracranial vascular imaging. Purpose To evaluate the image quality and cerebrovascular visualization of 5-T 3D TOF MRA for visualizing intracranial small branch arteries. Materials and Methods Participants (healthy volunteers or participants with a history of ischemic stroke undergoing intracranial CT angiography or MRA for identifying steno-occlusive disease) were prospectively included from September 2021 to November 2021. Each participant underwent 3-T, 5-T, and 7-T 3D TOF MRA with use of customized MR protocols within 48 hours. Radiologist scoring from 0 (invisible) to 3 (excellent) and quantitative assessment were obtained to evaluate the image quality. The Friedman test was used for comparison of characteristics derived from 3 T, 5 T, and 7 T. Results A total of 12 participants (mean age ± SD, 38 years ± 9; nine men) were included. Visualizations of the distal arteries and small vessels at 5-T TOF MRA were significantly higher than those at 3 T (median score: 3.0 vs 2.0, all P < .001 for distal segments and lenticulostriate artery; median score: 2.0 vs 0, P < .001 for pontine artery). The total length of small vessel branches detected at 5 T was larger than that at 3 T (5.1 m ± 0.7 vs 1.9 m ± 0.4; P < .001). However, there was no evidence of a significant difference compared with 7 T in either the depiction of distal segments and small vessel branches (average median score, 2.5; all P > .05) or the quantitative measurements (total length, 5.6 m ± 0.5; P = .41). Conclusion Three-dimensional time-of-flight MR angiography at 5 T presented the capability to provide superior visualization of distal large arteries and small vessel branches (in terms of subjective and quantitative assessment) to 3 T and had image quality similar to 7 T. © RSNA, 2022 Online supplemental material is available for this article. An earlier incorrect version appeared online. This article was corrected on September 14, 2022.

Carbonic Anhydrase-Embedded Hydrogen-Bonded Organic Frameworks Coating for Facilitated Offshore CO2 Fixation.

Exhausted emission of carbon dioxide (CO2 ) from ships or offshore platforms has become one of the major contributors to global carbon emissions. Enzymes such as carbonic anhydrase (CA) have been widely used for CO2 mineralization because of their high catalytic rate. However, CA in seawater is easy to inactivate and difficult to reuse. Immobilization would be a feasible solution to address the stability issue, which, however, may cause an increase of internal diffusion resistance and reduced catalytic activity. In this regard, design of high-performance biocatalysts for acquiring high catalytic activity and stability of CA is highly desirable. Herein, a monolithic catalyst of Filler-CA@Lys-HOF-1 (FCLH) was prepared by chemical sorption of CA on the surface of the Filler followed by the coating of Lys-HOF-1. The highest catalytic activity of FCLH was obtained by regulating the amount of HOF-1 monomer added. Due to the protection of Lys-HOF-1, the FCLH showed good tolerance against acidity and salinity, which could retain about 80.2 % of the original activity after 9 h incubation in simulated seawater. The catalytic activity of FCLH could retain 85.4 % of the initial activity after 10 cycles. Hopefully, our study can provide a promising biocatalyst for CO2 mineralization, which may drive down carbon emissions when used for CO2 capture and conversion on offshore platforms.

The importance of and difficulties involved in creating molecular probes for a carbon monoxide gasotransmitter.

As one of the triumvirate of recognized gasotransmitter molecules, namely NO, H2S, and CO, the physiological effects of CO and its potential as a biomarker have been widely investigated, garnering particular attention due to its reported hypotensive, anti-inflammatory, and cytoprotective properties, making it a promising therapeutic agent. However, the development of CO molecular probes has remained relatively stagnant in comparison with the fluorescent probes for NO and H2S, owing to its inert molecular state under physiological conditions. In this review, starting from elucidating the definition and significance of CO as a gasotransmitter, the imperative for the advancement of CO probes, especially fluorescent probes, is expounded. Subsequently, the current state of development of CO probe methodologies is comprehensively reviewed, with an overview of the challenges and prospects in this burgeoning field of research.

Competing Si2CH4-H2 and SiCH2-SiH4 Channels in the Bimolecular Reaction of Ground-State Atomic Carbon (C(3Pj)) with Disilane (Si2H6, X1A1g) under Single Collision Conditions.

The bimolecular gas-phase reaction of ground-state atomic carbon (C(3Pj)) with disilane (Si2H6, X1A1g) was explored under single-collision conditions in a crossed molecular beam machine at a collision energy of 36.6 ± 4.5 kJ mol-1. Two channels were observed: a molecular hydrogen elimination plus Si2CH4 (reaction 1) pathway and a silane loss channel along with the formation of SiCH2 (reaction 2), with branching ratios of 20 ± 3 and 80 ± 4%, respectively. Both channels involved indirect scattering dynamics via long-lived Si2CH6 reaction intermediate(s); the latter eject molecular hydrogen and silane in "molecular" elimination channels within the rotational plane of the fragmenting intermediate nearly perpendicularly to the total angular momentum vector. These molecular elimination channels are associated with tight exit transition states as reflected in a significant electron rearrangement as visible from the chemical bonding in the light reaction products molecular hydrogen and silane. Once these hydrogenated silicon-carbide clusters are formed within the inner envelope of carbon stars such as of IRC + 10216, the stellar wind can drive both Si2CH4 and SiCH2 to the outside sections of the envelope, where they can be photolyzed. This is of particular importance to unravel potential formation pathways to disilicon monocarbide (Si2C) observed recently in the circumstellar shell of IRC + 10216.

Fracture mapping of intra-articular calcaneal fractures.

BACKGROUND: Calcaneal fractures have complex morphology, which brings great challenges to clinical treatment. The primary fracture lines could help us simplify the fracture. Fracture mapping technology can help surgeons understand the fracture morphology more intuitively. This study aims to develop a further understanding of calcaneal fractures by delineating the primary fracture lines through the fracture mapping technology. METHODS: Ninety cases of intra-articular calcaneal fractures were reviewed between March 2016 and January 2019 at a level 1 trauma centre. The CT data of these cases were reconstructed and reduced using software. We superimposed the primary fracture lines on a standard model and created the distribution and heat map of the intra-articular calcaneal fractures. SPSS 18.0 was used to count the differences between the different groups. RESULTS: The primary fracture lines concentrated at the Gissane angle and the posterior articular surface, which could be summarized in two ring structures. There were 43 cases of fracture involving calcaneocuboid joint, including 32 cases of joint-depression fracture and 11 cases of tongue-type fracture. The area ratio of lateral fragment of simple tongue-type fracture is larger than joint-depression fracture. CONCLUSION: The primary fracture lines of calcaneus were distributed in two rings on the surface of calcaneus. Based on the distribution of primary fracture rings, we integrated the classification of calcaneal fracture and proposed some treatment recommendations.

Thermally Activated Delayed Near-Infrared Photoluminescence from Functionalized Lead-Free Nanocrystals.

As an analogue to thermally activated delayed fluorescence (TADF) of organic molecules, thermally activated delayed photoluminescence (TADPL) observed in molecule-functionalized semiconductor nanocrystals represents an exotic mechanism to harvest energy from dark molecular triplets and to obtain controllable, long-lived PL from nanocrystals. The reported TADPL systems have successfully covered the visible spectrum. However, TADF molecules already emit very efficiently in the visible, diminishing the technological impact of the less-efficient nanocrystal-molecule TADPL. Here we report bright, near-infrared TADPL in lead-free CuInSe2 nanocrystals functionalized with carboxylated tetracene ligands, which results from efficient triplet energy transfer from photoexcited nanocrystals to ligands, followed with thermally activated reverse energy transfer from ligand triplets back to nanocrystals. This strategy prolonged the nanocrystal exciton lifetime from 100 ns to 60 µs at room temperature.

3D-printed silica with nanoscale resolution.

Fabricating inorganic materials with designed three-dimensional nanostructures is an exciting yet challenging area of research and industrial application. Here, we develop an approach to 3D print high-quality nanostructures of silica with sub-200 nm resolution and with the flexible capability of rare-earth element doping. The printed SiO2 can be either amorphous glass or polycrystalline cristobalite controlled by the sintering process. The 3D-printed nanostructures demonstrate attractive optical properties. For instance, the fabricated micro-toroid optical resonators can reach quality factors (Q) of over 104. Moreover, and importantly for optical applications, doping and codoping of rare-earth salts such as Er3+, Tm3+, Yb3+, Eu3+ and Nd3+ can be directly implemented in the printed SiO2 structures, showing strong photoluminescence at the desired wavelengths. This technique shows the potential for building integrated microphotonics with silica via 3D printing.