Advancing Microfluidic Immunity Testing Systems: New Trends for Microbial Pathogen Detection.

Pathogenic microorganisms play a crucial role in the global disease burden due to their ability to cause various diseases and spread through multiple transmission routes. Immunity tests identify antigens related to these pathogens, thereby confirming past infections and monitoring the host's immune response. Traditional pathogen detection methods, including enzyme-linked immunosorbent assays (ELISAs) and chemiluminescent immunoassays (CLIAs), are often labor-intensive, slow, and reliant on sophisticated equipment and skilled personnel, which can be limiting in resource-poor settings. In contrast, the development of microfluidic technologies presents a promising alternative, offering automation, miniaturization, and cost efficiency. These advanced methods are poised to replace traditional assays by streamlining processes and enabling rapid, high-throughput immunity testing for pathogens. This review highlights the latest advancements in microfluidic systems designed for rapid and high-throughput immunity testing, incorporating immunosensors, single molecule arrays (Simoas), a lateral flow assay (LFA), and smartphone integration. It focuses on key pathogenic microorganisms such as SARS-CoV-2, influenza, and the ZIKA virus (ZIKV). Additionally, the review discusses the challenges, commercialization prospects, and future directions to advance microfluidic systems for infectious disease detection.

Advances in Nucleic Acid Assays for Infectious Disease: The Role of Microfluidic Technology.

Within the fields of infectious disease diagnostics, microfluidic-based integrated technology systems have become a vital technology in enhancing the rapidity, accuracy, and portability of pathogen detection. These systems synergize microfluidic techniques with advanced molecular biology methods, including reverse transcription polymerase chain reaction (RT-PCR), loop-mediated isothermal amplification (LAMP), and clustered regularly interspaced short palindromic repeats (CRISPR), have been successfully used to identify a diverse array of pathogens, including COVID-19, Ebola, Zika, and dengue fever. This review outlines the advances in pathogen detection, attributing them to the integration of microfluidic technology with traditional molecular biology methods and smartphone- and paper-based diagnostic assays. The cutting-edge diagnostic technologies are of critical importance for disease prevention and epidemic surveillance. Looking ahead, research is expected to focus on increasing detection sensitivity, streamlining testing processes, reducing costs, and enhancing the capability for remote data sharing. These improvements aim to achieve broader coverage and quicker response mechanisms, thereby constructing a more robust defense for global public health security.

Oxygen inhibition of free-radical polymerization is the dominant mechanism behind the "mold effect" on hydrogels.

Hydrogel surfaces are of great importance in numerous applications ranging from cell-growth studies and hydrogel-patch adhesion to catheter coatings and contact lenses. A common method to control the structure and mechanical/tribological properties of hydrogel surfaces is by synthesizing them in various mold materials, whose influence has been widely ascribed to their hydrophobicity. In this work, we examine possible mechanisms for this "mold effect" on the surface of hydrogels during polymerization. Our results for polyacrylamide gels clearly rule out the effect of mold hydrophobicity as well as any thermal-gradient effects during synthesis. We show unequivocally that oxygen diffuses out of certain molding materials and into the reaction mixture, thereby inhibiting free-radical polymerization in the vicinity of the molding interface. Removal of oxygen from the system results in homogeneously cross-linked hydrogel surfaces, irrespective of the substrate material used. Moreover, by varying the amount of oxygen at the surface of the polymerizing solutions using a permeable membrane we are able to tailor the surface structures and mechanical properties of PAAm, PEGDA and HEMA hydrogels in a controlled manner.

Linking Friction and Surface Properties of Hydrogels Molded Against Materials of Different Surface Energies.

Biological tissues subjected to rubbing, such as the cornea and eyelid or articular cartilage, are covered in brushy, hydrated mucous structures in order to reduce the shear stress on the tissue. To mimic such biological tissues, we have prepared polyacrylamide (PAAm) hydrogels with various concentrations of un-cross-linked chains on their surfaces by synthesizing them in molds of different surface energies. The selected molding materials included hydrophilic glass, polyoxymethylene (POM), polystyrene (PS), polyethylene (PE), polypropylene (PP), and polytetrafluoroethylene (PTFE). After synthesis, demolding, and equilibration in water, the elastic modulus at the hydrogel surface decreased with increasing water contact angle of the mold. The softer, brushier surfaces did not completely collapse under compressive pressures up to 10 kPa, remaining better hydrated compared to their denser, cross-linked analogs. The hydrogels with brushier surfaces displayed an order of magnitude lower coefficient of friction than the cross-linked ones, which is attributed to the ability of their near-surface regions to retain larger amounts of liquid at the interface. The characteristic speed-dependent friction of the denser, cross-linked hydrogel surface is compared to the speed-independent friction of the brushy hydrogels and discussed from the perspectives of (elasto)hydrodynamic lubrication, permeability, and shear-induced hydrodynamic penetration depth.

Hydrogels with a Memory: Dual-Responsive, Organometallic Poly(ionic liquid)s with Hysteretic Volume-Phase Transition.

We report on the synthesis and structure-property relations of a novel, dual-responsive organometallic poly(ionic liquid) (PIL), consisting of a poly(ferrocenylsilane) backbone of alternating redox-active, silane-bridged ferrocene units and tetraalkylphosphonium sulfonate moieties in the side groups. This PIL is redox responsive due to the presence of ferrocene in the backbone and also exhibits a lower critical solution temperature (LCST)-type thermal responsive behavior. The LCST phase transition originates from the interaction between water molecules and the ionic substituents and shows a concentration-dependent, tunable transition temperature in aqueous solution. The PIL's LCST-type transition temperature can also be influenced by varying the redox state of ferrocene in the polymer main chain. As the polymer can be readily cross-linked and is easily converted into hydrogels, it represents a new dual-responsive materials platform. Interestingly, the as-formed hydrogels display an unusual, strongly hysteretic volume-phase transition indicating useful thermal memory properties. By employing the dispersing abilities of this cationic PIL, CNT-hydrogel composites were successfully prepared. These hybrid conductive composite hydrogels showed bi-stable states and tunable resistance in heating-cooling cycles.

A Noncontact Dibutyl Phthalate Sensor Based on a Wireless-Electrodeless QCM-D Modified with Nano-Structured Nickel Hydroxide.

Dibutyl phthalate (DBP) is a widely used plasticizer which has been found to be a reproductive and developmental toxicant and ubiquitously existing in the air. A highly sensitive method for DBP monitoring in the environment is urgently needed. A DBP sensor based on a homemade wireless-electrodeless quartz crystal microbalance with dissipation (QCM-D) coated with nano-structured nickel hydroxide is presented. With the noncontact configuration, the sensing system could work at a higher resonance frequency (the 3rd overtone) and the response of the system was even more stable compared with a conventional quartz crystal microbalance (QCM). The sensor achieved a sensitivity of 7.3 Hz/ppb to DBP in a concentration range of 0.4-40 ppb and an ultra-low detection limit of 0.4 ppb of DBP has also been achieved.

Highly Swellable, Dual-Responsive Hydrogels Based on PNIPAM and Redox Active Poly(ferrocenylsilane) Poly(ionic liquid)s: Synthesis, Structure, and Properties.

Highly swellable, dual-responsive hydrogels, consisting of thermo-responsive poly(N-isopropylacrylamide) (PNIPAM) and redox-responsive poly(ferrocenylsilane) (PFS) based poly(ionic liquid)s (PILs) are formed by photo-polymerization. PFS chains bearing cross-linkable vinylimidazolium (VIm) side groups are copolymerized with NIPAM in aqueous solutions under ultraviolet light (λ = 365 nm) in the presence of a photoinitiator. The PFS-PILs serve as a macro-cross-linker and also provide redox responsiveness. The swelling ratio, morphology, and lower critical solution temperature (LCST) of the hydrogels are studied as a function of the PNIPAM/PFS ratio. The value of the LCST is dependent on the choice of the counterion of the PIL and the PNIPAM/PFS ratio. The hydrogel is employed as a reducing environment for the in situ fabrication of gold nanoparticles (AuNPs), forming AuNP-hydrogel composites. The localized surface plasmon resonance peak of the as-synthesized Au nanoparticles inside the hydrogel could be tuned by altering the temperature.

Enhanced Dibutyl Phthalate Sensing Performance of a Quartz Crystal Microbalance Coated with Au-Decorated ZnO Porous Microspheres.

Noble metals addition on nanostructured metal oxides is an attractive way to enhance gas sensing properties. Herein, hierarchical zinc oxide (ZnO) porous microspheres decorated with cubic gold particles (Au particles) were synthesized using a facile hydrothermal method. The as-prepared Au-decorated ZnO was then utilized as the sensing film of a gas sensor based on a quartz crystal microbalance (QCM). This fabricated sensor was applied to detect dibutyl phthalate (DBP), which is a widely used plasticizer, and its coating load was optimized. When tested at room temperature, the sensor exhibited a high sensitivity of 38.10 Hz/ppb to DBP in a low concentration range from 2 ppb to 30 ppb and the calculated theoretical detection limit is below 1 ppb. It maintains good repeatability as well as long-term stability. Compared with the undecorated ZnO based QCM, the Au-decorated one achieved a 1.62-time enhancement in sensitivity to DBP, and the selectivity was also improved. According to the experimental results, Au-functionalized ZnO porous microspheres displayed superior sensing performance towards DBP, indicating its potential use in monitoring plasticizers in the gaseous state. Moreover, Au decoration of porous metal oxide nanostructures is proved to be an effective approach for enhancing the gas sensing properties and the corresponding mechanism was investigated.

Breathing pores on command: redox-responsive spongy membranes from poly(ferrocenylsilane)s.

Redox-responsive porous membranes can be readily formed by electrostatic complexation between redox active poly(ferrocenylsilane) PFS-based poly(ionic liquid)s and organic acids. Redox-induced changes on this membrane demonstrated reversible switching between more open and more closed porous structures. By taking advantage of the structure changes in the oxidized and reduced states, the porous membrane exhibits reversible permeability control and shows great potential in gated filtration, catalysis, and controlled release.

Recent Advances in Dielectrophoretic Manipulation and Separation of Microparticles and Biological Cells.

Dielectrophoresis (DEP) is an advanced microfluidic manipulation technique that is based on the interaction of polarized particles with the spatial gradient of a non-uniform electric field to achieve non-contact and highly selective manipulation of particles. In recent years, DEP has made remarkable progress in the field of microfluidics, and it has gradually transitioned from laboratory-scale research to high-throughput manipulation in practical applications. This paper reviews the recent advances in dielectric manipulation and separation of microparticles and biological cells and discusses in detail the design of chip structures for the two main methods, direct current dielectrophoresis (DC-DEP) and alternating current dielectrophoresis (AC-DEP). The working principles, technical implementation details, and other improved designs of electrode-based and insulator-based chips are summarized. Functional customization of DEP systems with specific capabilities, including separation, capture, purification, aggregation, and assembly of particles and cells, is then performed. The aim of this paper is to provide new ideas for the design of novel DEP micro/nano platforms with the desired high throughput for further development in practical applications.

A novel viscoelastic microfluidic platform for nanoparticle/small extracellular vesicle separation through viscosity gradient-induced migration.

Small extracellular vesicles (sEVs) are extracellular vesicles with diameters ranging from 30 to 150 nm, harboring proteins and nucleic acids that reflect their source cells and act as vital mediators of intercellular communication. The comprehensive analysis of sEVs is hindered by the complex composition of biofluids that contain various extracellular vesicles. Conventional separation methods, such as ultracentrifugation and immunoaffinity capture, face routine challenges in operation complexity, cost, and compromised recovery rates. Microfluidic technologies, particularly viscoelastic microfluidics, offer a promising alternative for sEV separation due to its field-free nature, fast and simple operation procedure, and minimal sample consumption. In this context, we here introduce an innovative viscoelastic approach designed to exploit the viscosity gradient-induced force with size-dependent characteristics, thereby enabling the efficient separation of nano-sized particles and sEVs from larger impurities. We first seek to illustrate the underlying mechanism of the viscosity gradient-induced force, followed by experimental validation with fluorescent nanoparticles demonstrating separation results consistent with qualitative analysis. We believe that this work is the first to report such viscosity gradient-induced phenomenon in the microfluidic context. The presented approach achieves ∼80% for both target purity and recovery rate. We further demonstrate effective sEV separation using our device to showcase its efficacy in the real biological context, highlighting its potential as a versatile, label-free platform for sEV analysis in both fundamental biological research and clinical applications.

Review on Microreactors for Photo-Electrocatalysis Artificial Photosynthesis Regeneration of Coenzymes.

In recent years, with the outbreak of the global energy crisis, renewable solar energy has become a focal point of research. However, the utilization efficiency of natural photosynthesis (NPS) is only about 1%. Inspired by NPS, artificial photosynthesis (APS) was developed and utilized in applications such as the regeneration of coenzymes. APS for coenzyme regeneration can overcome the problem of high energy consumption in comparison to electrocatalytic methods. Microreactors represent a promising technology. Compared with the conventional system, it has the advantages of a large specific surface area, the fast diffusion of small molecules, and high efficiency. Introducing microreactors can lead to more efficient, economical, and environmentally friendly coenzyme regeneration in artificial photosynthesis. This review begins with a brief introduction of APS and microreactors, and then summarizes research on traditional electrocatalytic coenzyme regeneration, as well as photocatalytic and photo-electrocatalysis coenzyme regeneration by APS, all based on microreactors, and compares them with the corresponding conventional system. Finally, it looks forward to the promising prospects of this technology.

A Novel DNA Synthesis Platform Design with High-Throughput Paralleled Addressability and High-Density Static Droplet Confinement.

Using DNA as the next-generation medium for data storage offers unparalleled advantages in terms of data density, storage duration, and power consumption as compared to existing data storage technologies. To meet the high-speed data writing requirements in DNA data storage, this paper proposes a novel design for an ultra-high-density and high-throughput DNA synthesis platform. The presented design mainly leverages two functional modules: a dynamic random-access memory (DRAM)-like integrated circuit (IC) responsible for electrode addressing and voltage supply, and the static droplet array (SDA)-based microfluidic structure to eliminate any reaction species diffusion concern in electrochemical DNA synthesis. Through theoretical analysis and simulation studies, we validate the effective addressing of 10 million electrodes and stable, adjustable voltage supply by the integrated circuit. We also demonstrate a reaction unit size down to 3.16 × 3.16 µm2, equivalent to 10 million/cm2, that can rapidly and stably generate static droplets at each site, effectively constraining proton diffusion. Finally, we conducted a synthesis cycle experiment by incorporating fluorescent beacons on a microfabricated electrode array to examine the feasibility of our design.

Implementation of Rapid Nucleic Acid Amplification Based on the Super Large Thermoelectric Cooler Rapid Temperature Rise and Fall Heating Module.

In the rapid development of molecular biology, nucleic acid amplification detection technology has received more and more attention. The traditional polymerase chain reaction (PCR) instrument has poor refrigeration performance during its transition from a high temperature to a low temperature in the temperature cycle, resulting in a longer PCR amplification cycle. Peltier element equipped with both heating and cooling functions was used, while the robust adaptive fuzzy proportional integral derivative (PID) algorithm was also utilized as the fundamental temperature control mechanism. The heating and cooling functions were switched through the state machine mode, and the PCR temperature control module was designed to achieve rapid temperature change. Cycle temperature test results showed that the fuzzy PID control algorithm was used to accurately control the temperature and achieve rapid temperature rise and fall (average rising speed = 11 °C/s, average falling speed = 8 °C/s) while preventing temperature overcharging, maintaining temperature stability, and achieving ultra-fast PCR amplification processes (45 temperature cycle time < 19 min). The quantitative results show that different amounts of fluorescence signals can be observed according to the different concentrations of added viral particles, and an analytical detection limit (LoD) as low as 10 copies per µL can be achieved with no false positive in the negative control. The results show that the TEC amplification of nucleic acid has a high detection rate, sensitivity, and stability. This study intended to solve the problem where the existing thermal cycle temperature control technology finds it difficult to meet various new development requirements, such as the rapid, efficient, and miniaturization of PCR.

DC-Dielectrophoretic Manipulation and Isolation of Microplastic Particle-Treated Microalgae Cells in Asymmetric-Orifice-Based Microfluidic Chip.

A novel direct-current dielectrophoretic (DC-DEP) method is proposed for the manipulation and isolation of microplastic particle (MP)-treated microalgae cells according to their dielectric properties in a microfluidic chip. The lateral migration and trajectory of the microalgae cells were investigated. To induce stronger DC-DEP effects, a non-homogeneous electric-field gradient was generated by applying the DC electric voltages through triple pairs of asymmetric orifices with three small orifices and one large orifice located on the opposite microchannel wall across the whole channel, leading to the enhanced magnitude of the non-uniform electric-field gradient and effective dielectrophoretic area. The effects of the applied voltage, the polystyrene (PS) adsorption coverage, and thickness on the DC-DEP behaviors and migration were numerically investigated, and it was found that the effect of the PS adsorption thickness of the Chlorella cells on the DC-DEP behaviors can be neglected, but the effect on their trajectory shifts cannot. In this way, the separation of 3 µm and 6 µm Chlorella coated with 100% PS particles and the isolation of the Chlorella cells from those coated with various coverages and thicknesses of PS particles was successfully achieved, providing a promising method for the isolation of microalgae cells and the removal of undesired cells from a target suspension.

MAPK Signaling Pathway Plays Different Regulatory Roles in the Effects of Boric Acid on Proliferation, Apoptosis, and Immune Function of Splenic Lymphocytes in Rats.

Boron is one of the essential trace elements in animals. Although boron supplementation can enhance immune function and promote cell proliferation, high-dose boron supplementation can negatively affect immune function and inhibit cell proliferation. Furthermore, its action pathway is unknown. In this study, ERK1/2, JNK, and p38MAPK signaling pathways were blocked using specific blockers to investigate the impact of low-dose and high-dose boron on proliferation, apoptosis, and immune function of lymphocytes, and the expression of genes related to cell proliferation and apoptosis in rats. The addition of 0.4 mmol/L boron did not affect the ratio of CD4+/CD8+ T cells (P>0.05), IgG and IFN-γ contents (P>0.05), the proliferation rate of lymphocytes (P>0.05), and mRNA and protein expressions of PCNA (P>0.05) in the spleen after ERK1/2 signal pathway was selectively inhibited. Moreover, the addition of 40 mmol/L boron did not affect the proportion of CD4+ T cells, contents of IgG and cytokines (IL-2 and IL-4), proliferation and apoptosis rates of lymphocytes, and expression of proliferation- and apoptosis-related genes in the spleen. Meanwhile, the addition of 0.4 mmol/l boron increased the ratio of CD4+/CD8+ T cells (P<0.05 or P<0.01), IFN-γ or IgG contents (P<0.05), and the proliferation rate of lymphocytes (P<0.05) in spleen after selective inhibition of JNK or p38MAPK signaling pathways, while the protein expression of Caspase-3 decreased (P<0.05 or P<0.01). Furthermore, 40 mmol/L boron decreased the proportion of lymphocyte subsets, cytokine contents, proliferation rate of lymphocytes, and mRNA and protein expressions of PCNA. In contrast, the mRNA and protein expressions of Caspase-3 and protein expression of Bax were increased. These results indicate that ERK1/2 signaling pathway mainly regulates the effects of low-dose and high-dose boron on proliferation, apoptosis, and immune function of splenic lymphocytes.

Color-encoded microcarriers based on nano-silicon dioxide film for multiplexed immunoassays.

Multiplexed analysis allows researchers to obtain high-density information with minimal assay time, sample volume and cost. Currently, microcarrier or particle-based approaches for multiplexed analysis involve complicated or expensive encoding and decoding processes. In this paper, a novel optical encoding technique based on nano-silicon dioxide film is presented. Microcarriers composed of thermally grown silicon dioxide (SiO(2)) film and monocrystalline silicon (Si) substrate were fabricated. The nano-silicon dioxide film exhibited unique surface color by low-coherence interference. Hence the colors can be used for encoding at least 100 microcarriers loaded with films of different thickness. We demonstrated that color-encoded microcarriers loaded with antigens could be used for multiplexed immunoassays to detect goat anti-human IgG, goat anti-mouse IgG and goat anti-rabbit IgG, with fluorescent detection as the interrogating approach. This microcarrier-based method also exhibited improved analytical performance compared with a microarray technique. This approach will provide new opportunities for multiplexed target assay development.

Template free synthesis of hollow ball-like nano-Fe2O3 and its application to the detection of dimethyl methylphosphonate at room temperature.

This paper is focused on the template-free synthesis of nanosized ferric oxide (nano-Fe(2)O(3)) and its application in quartz crystal microbalance (QCM) resonators to detect dimethyl methylphosphonate (DMMP), a simulant of Sarin. The X-ray diffraction (XRD) patterns confirm that the synthesized samples are made of Fe(2)O(3) and the scanning electron microscopy (SEM) pictures show that the samples have ball-like shapes. The DMMP sensors with a sensing film of hollow ball-like and solid ball-like Fe(2)O(3) are fabricated and their sensing characteristics are compared. The sensitivity of the hollow ball-like Fe(2)O(3) sensor is more than 500% higher than the one of the solid ball-like Fe(2)O(3) sensor. The hollow ball-like nano-Fe(2)O(3) can be synthesized by a novel low temperature hydrothermal method. The sensors with the hollow ball-like Fe(2)O(3) film perform well in a range of 1 to 6 ppm, with a sensitivity of 29 Hz/ppm at room temperature, while the appropriate recoverability and selectivity are maintained. In addition, the performance of different thicknesses of the sensing film of the hollow ball-like nano-Fe(2)O(3) is investigated and the optimized relative film thickness of the hollow ball-like nano-Fe(2)O(3) is found to be 20 µg/mm(2).

Versatile Surface Modification of Hydrogels by Surface-Initiated, Cu0-Mediated Controlled Radical Polymerization.

Surface-initiated controlled radical polymerization mediated by a Cu0 plate (SI-Cu0 CRP) emerges as a versatile and efficient method for the functionalization of the exposed surfaces of hydrogels with a wide variety of polymer brushes. When a Cu0 plate is placed in contact with initiator-bearing hydrogel surfaces in the presence of ligand and monomer and under ambient conditions, it rapidly consumes dissolved oxygen from the reaction mixture, further acting as a source of catalyst and leading to the rapid growth of hydrogel-bound polymer chains. Three types of functional surfaces have been prepared as examples of the wide range of potential materials that can be synthesized in this way, including a hydrogel with a protective, hydrophobic surface, a lubricious hydrogel, as well as a hydrogel with thermally switchable frictional properties.

Creating an Interface: Rendering a Double-Network Hydrogel Lubricious via Spontaneous Delamination.

Hydrogels engineered with specific surface chemistries and architectures have found myriad applications in electronics, biofouling, biolubrication, and biomedical devices. Free-radical polymerization is frequently employed to construct covalently bonded networks in hydrogels, and any inhibition of the radical reactions by oxygen at the surface of the reaction mixture is generally undesirable. The internal stress caused by the resulting gradient in the cross-linking density during polymerization can give rise to a physical deformation of the surface, resulting in wrinkles, creases, or cracks. However, this oxygen-inhibition effect can be positively utilized to create finely controlled surface structures. We describe a two-step cross-linking strategy for the fabrication of a P(AAm-AMPS)/alginate double-network hydrogel in the presence of air, which enables greater independent control over surface chemistry and functionality than homogeneously processed conventional double-network hydrogels. An alginate-rich "skin" layer is spontaneously delaminated due to the mechanical instability and osmotic mismatch between the swollen double-network hydrogel matrix and the rigid "skin" layer. Removal of the "skin" layer results in a lubricious surface with coefficients of friction as low as 0.02 against glass in aqueous solutions. The proposed strategy can be generalized to develop soft functional materials with unique structures and properties and precise control over the surface chemistry.