Ring-shaped odor coding in the antennal lobe of migratory locusts.

The representation of odors in the locust antennal lobe with its >2,000 glomeruli has long remained a perplexing puzzle. We employed the CRISPR-Cas9 system to generate transgenic locusts expressing the genetically encoded calcium indicator GCaMP in olfactory sensory neurons. Using two-photon functional imaging, we mapped the spatial activation patterns representing a wide range of ecologically relevant odors across all six developmental stages. Our findings reveal a functionally ring-shaped organization of the antennal lobe composed of specific glomerular clusters. This configuration establishes an odor-specific chemotopic representation by encoding different chemical classes and ecologically distinct odors in the form of glomerular rings. The ring-shaped glomerular arrangement, which we confirm by selective targeting of OR70a-expressing sensory neurons, occurs throughout development, and the odor-coding pattern within the glomerular population is consistent across developmental stages. Mechanistically, this unconventional spatial olfactory code reflects the locust-specific and multiplexed glomerular innervation pattern of the antennal lobe.

Anion Structure Regulation of Cobalt Silicate Hydroxide Endowing Boosted Oxygen Evolution Reaction.

Transition metal silicates (TMSs) are attempted for the electrocatalyst of oxygen evolution reaction (OER) due to their special layered structure in recent years. However, defects such as low theoretical activity and conductivity limit their application. Researchers always prefer to composite TMSs with other functional materials to make up for their deficiency, but rarely focus on the effect of intrinsic structure adjustment on their catalytic activity, especially anion structure regulation. Herein, applying the method of interference hydrolysis and vacancy reserve, new silicate vacancies (anionic regulation) are introduced in cobalt silicate hydroxide (CoSi), named SV-CoSi, to enlarge the number and enhance the activity of catalytic sites. The overpotential of SV-CoSi declines to 301 mV at 10 mA cm-2 compared to 438 mV of CoSi. Source of such improvement is verified to be not only the increase of active sites, but also the positive effect on the intrinsic activity due to the enhancement of cobalt-oxygen covalence with the variation of anion structure by density functional theory (DFT) method. This work demonstrates that the feasible intrinsic anion structure regulation can improve OER performance of TMSs and provides an effective idea for the development of non-noble metal catalyst for OER.

Photophysical Properties of (E)-1-(4-(Diethyla-mino)-2-hydroxybenzylidene)-4,4-dimethylthiosemicarbazide Compound and Its Triple Fluorescence Emission Mechanism: A Theoretical Perspective.

In view of the application prospects in biomedicine of (E)-1-(4-(diethyla-mino)-2-hydroxybenzylidene)-4,4-dimethylthiosemicarbazide (DAHTS), the behavior of excited-state dynamics and photophysical properties were studied using the density functional theory/time-dependent density functional theory method. A series of studies indicated that the intramolecular hydrogen-bond (IHB) intensity of DAHTS was enhanced after photoexcitation. This was conducive to promoting the excited-state intramolecular proton-transfer (ESIPT) process. Combining the analysis of the IHB and hole-electron, it revealed that the molecule underwent both the ESIPT process and the twisted charge-transfer (TICT) process. Relying on exploration of the potential energy surface, it was proposed that the different competitive mechanisms between the ESIPT and TICT processes were regulated by solvent polarity. In acetonitrile (ACN) solvent, the ESIPT process occurred first, and the TICT process occurred later. In contrast, in the CYH solvent, the molecule first underwent the TICT process and then the ESIPT process. Furthermore, we raised the possibility that the TICT behavior was the cause of weak fluorescence emission for the DAHTS in CYH and ACN solvents. By the dimer correlation analysis, the corresponding components of triple fluorescence emission were clearly assigned, corresponding to the monomer, dimer, and ESIPT isomer in turn. Our work precisely elucidated the photophysical mechanism of DAHTS and the attribution of the triple fluorescence emission components, which provided valuable guidance for the development and regulation of bioactive fluorescence probes with multiband and multicolor emission characteristics.

Oriented Assembled Prussian Blue Analogue Framework for Confined Catalytic Decomposition of Ammonium Perchlorate.

The design of highly dispersed active sites of hollow materials and unique contact behavior with the components to be catalyzed provide infinite possibilities for exploring the limits of catalyst capacity. In this study, the synthesis strategy of highly open 3-dimensional frame structure Prussian blue analogues (CoFe-PBA) was explored through structure self-transformation, which was jointly guided by template mediated epitaxial growth, restricted assembly and directional assembly. Additionally, good application prospect of CoFe-PBA as combustion catalyst was discussed. The results show that unexpected thermal decomposition behavior can be achieved by limiting AP(ammonium perchlorate) to the framework of CoFe-PBA. The high temperature decomposition stage of AP can be advanced to 283.6 °C and the weight loss rate can reach 390.03% min-1 . In-situ monitoring shows that CoFe-PBA can accelerate the formation of NO and NO2 . The calculation of reaction kinetics proved that catalytic process was realized by increasing the nucleation factor. On this basis, the catalytic mechanism of CoFe-PBA on the thermal decomposition of AP was discussed, and the possible interaction process between AP and CoFe-PBA during heating was proposed. At the same time, another interesting functional behavior to prevent AP from caking was discussed.

Paying Comprehensive Attention to the Temperature-Dependent Dual-Channel Excited-State Intramolecular Proton Transfer Mechanism of Fluorescence Ratio Probe BZ-DAM.

The mechanism of fluorescence detection of diethyl chlorophosphate (DCP) based on 2-substituted benzothiazole (BZ-DAM) was studied by a theoretical calculation method. It should not be ignored that both the BZ-DAM and the detection product BZ-CHO have two excited-state intramolecular proton transfer (ESIPT) channels. Density functional theory (DFT) and time-dependent DFT (TDDFT) theory were used to study the photophysical mechanism of two compounds in two channels in (acetonitrile) ACN solvent, and the temperature dependence of the two channels was given. Channel 1 is more likely to exist at low temperatures and channel 2 is more likely to exist at high temperatures. By theoretical analysis of the constructed potential energy curve, the hydrogen bond energy and electron-hole analysis, we confirmed that both molecules undergo ESIPT and intramolecular charge transfer (ICT) processes in channel 1 and ESIPT and twisted intramolecular charge transfer (TICT) coupling processes in channel 2. The formation of product BZ-CHO molecules led to a significant fluorescence blue-shift phenomenon and inhibited the ICT process, which confirmed that BZ-DAM could be used as a fluorescence probe for fluorescence detection. We sincerely hope that this work will not only help to clarify the excited-state dynamics behavior of the BZ-DAM probe but also provide a new idea for designing and optimizing a new chemical dosimeter.

Synthesis of Zn2+-Pre-Intercalated V2O5·nH2O/rGO Composite with Boosted Electrochemical Properties for Aqueous Zn-Ion Batteries.

Layered vanadium-based materials are considered to be great potential electrode materials for aqueous Zn-ion batteries (AZIBs). The improvement of the electrochemical properties of vanadium-based materials is a hot research topic but still a challenge. Herein, a composite of Zn-ion pre-intercalated V2O5·nH2O combined with reduced graphene oxide (ZnVOH/rGO) is synthesized by a facile hydrothermal method and it shows improved Zn-ion storage. ZnVOH/rGO delivers a capacity of 325 mAh·g-1 at 0.1 A·g-1, and this value can still reach 210 mAh·g-1 after 100 cycles. Additionally, it exhibits 196 mAh·g-1 and keeps 161 mAh·g-1 after 1200 cycles at 4 A·g-1. The achieved performances are much higher than that of ZnVOH and VOH. All results reveal that Zn2+ as "pillars" expands the interlayer distance of VOH and facilitates the fast kinetics, and rGO improves the electron flow. They both stabilize the structure and enhance efficient Zn2+ migration. All findings demonstrate ZnVOH/rGO's potential as a perspective cathode material for AZIBs.

FcRn is not the receptor mediating the transfer of serum IgG to colostrum in pigs.

In contrast to humans or rabbits, in which maternal IgG is transmitted to offspring prenatally via the placenta or the yolk sac, large domestic animals such as pigs, cows and sheep transmit IgG exclusively through colostrum feeding after delivery. The extremely high IgG content in colostrum is absorbed by newborns via the small intestine. Although it is widely accepted that the neonatal Fc receptor, FcRn, is the receptor mediating IgG transfer across both the placenta and small intestine, it remains unclear whether FcRn also mediates serum IgG transfer across the mammary barrier to colostrum/milk, especially in large domestic animals. In this study, using a FcRn knockout pig model generated with a CRISPR-Cas9-based approach, we clearly demonstrate that FcRn is not responsible for the IgG transfer from serum to colostrum in pigs, although like in other mammals, it is involved in IgG homeostasis and mediates IgG absorption in the small intestine of newborns.

Fabrication of Phosphorus-Doped Cobalt Silicate with Improved Electrochemical Properties.

The development of electrode materials for supercapacitors (SCs) is greatly desired, and this still poses an immense challenge for researchers. Cobalt silicate (Co2SiO4, denoted as CoSi) with a high theoretical capacity is deemed to be one of the sustainable electrode materials for SCs. However, its achieved electrochemical properties are still not satisfying. Herein, the phosphorus (P)-doped cobalt silicate, denoted as PCoSi, is synthesized by a calcining strategy. The PCoSi exhibits 1D nanobelts with a specific surface area of 46 m2∙g-1, and it can significantly improve the electrochemical properties of CoSi. As a supercapacitor's (SC's) electrode, the specific capacitance of PCoSi attains 434 F∙g-1 at 0.5 A∙g-1, which is much higher than the value of CoSi (244 F∙g-1 at 0.5 A∙g-1). The synergy between the composition and structure endows PCoSi with attractive electrochemical properties. This work provides a novel strategy to improve the electrochemical performances of transition metal silicates.

Long noncoding RNA CASC2 promotes paclitaxel resistance in breast cancer through regulation of miR-18a-5p/CDK19.

Breast cancer is one of the most prevalent cancers in women. Chemoresistance is a major obstacle for the treatment of breast cancer. We investigated the role of long noncoding RNA (lncRNA) cancer susceptibility candidate 2 (CASC2) in paclitaxel (PTX) resistance in breast cancer. CASC2 expression was increased in PTX-resistant clinical samples and cell lines. PTX induced CASC2 expression in a concentration-dependent manner. Downregulation of CASC2 increased PTX toxicity and decreased IC50 value, while upregulation of CASC2 decreased PTX toxicity and increased IC50 value in MCF-7/PTX and MDA-MB-231/PTX cells. Moreover, downregulation of CASC2 decreased tumor growth in xenograft mice implanted with MCF-7/PTX cells. miR-18a-5p possessed a putative binding site in 3'-UTR of CASC2 and cyclin-dependent kinase 19 (CDK19). In PTX-resistant breast cancer cells, miR-18a-5p expression was decreased. CASC2 and miR-18a-5p could negatively regulate the expression of each other. CDK19 expression could be negatively regulated by miR-18a-5p, but positively regulated by CASC2. miR-18a-5p mimics or downregulation of CDK19 decreased tumor growth in xenograft mice implanted with MCF-7/PTX cells. In summary, we identified that CASC2 activated PTX resistance in breast cancer through regulation of miR-18a-5p/CDK19. We highlight the importance of CASC2/miR-18a-5p/CDK19 axis in the chemoresistance of breast cancer and provide potential targets for the improving chemotherapy of breast cancer.

Association of heat shock protein 90 with the developmental competence of immature oocytes following Cryotop and solid surface vitrification in yaks (Bos grunniens).

The correlation between the 90 kDa heat-shock protein (HSP90) and the developmental competence of yak (Bos grunniens) oocytes following the process of vitrification has not been studied clearly. In the present study, we compare the efficacies of Cryotop (CT) and solid surface vitrification (SSV) methods for the cryopreservation of immature yak oocytes. Yak cumulus oocyte complexes were randomly allocated into three groups: (1) controls, (2) CT vitrification, and (3) SSV vitrification. Oocytes were vitrified and in vitro maturated and fertilized. The percentages of nuclear maturation and in vitro development were evaluated. The vitrified-warmed oocytes were evaluated for mRNA and protein expression levels of HSP90 using quantitative real-time PCR and western blotting at various stages: matured oocytes, 2-8 cells embryos and blastocysts. No difference was found in the percentages of nuclear maturation, cleavage or blastocyst in the two vitrified groups; however, the rates of maturation were significantly lower than those in the control group. Among the three groups, the maturation rates in CT: 51.14±0.86% and SSV: 50.82±1.34% were less than those of the controls: 69.65±1.13%; the cleavage rates in CT: 39.16±1.01% and SSV: 39.08±0.92%, were less than those of the controls: 58.14±0.76%; but the blastocysts rates and total cell number in the blastocysts were similar: CT: 32.20±0.73% and 104.6±3.72; SSV: 32.35±0.81% and 102.4±1.34; and controls: 34.38±1.32% and 103.8±4.13, respectively. The HSP90 expression level in the matured oocytes and 2-8 cell embryos of the control group was significantly higher than that in the two vitrified groups; there was not significant difference in the blastocysts in the three groups. We thus conclude that CT and SSV perform equally in the vitrification of immature yak oocytes during the process of cryopreservation, and their influence on oocytes mainly occured from the maturation to cleavage stages. The HSP90 levels in the blastocysts of the vitrified groups increased is associated with the developmental competence of the embryo.

Highly efficient photocatalyst fabricated from the recycling of heavy metal ions in wastewater for dye degradation.

Water pollution and energy crisis are becoming global and strategic issues that people are closely concerned about. Green and energy-saving photocatalytic technology is developing rapidly in solving global energy crises and environmental pollution problems. Therefore, we propose the "kill two birds with one stone" strategy to design efficient photocatalysts for dye wastewater treatment by utilizing heavy metal ions in wastewater. The adsorption properties of Mordenite (MOR) were utilized to removal heavy metal ions (Cd2+ and Zn2+) from waste water, and the adsorbed heavy metal ions were dried and sulfurized to obtain CdS/ZnS/MOR(ZnCdM). Then, g-C3N4 was ultrasonically dispersed and composited with ZnCdM by self-assembly, 25 wt% ZnCdCM photocatalytic material was obtained with a degradation rate of 99.8% in 1.5 h for Rhodamine B(RhB). It was found that MOR can provid adequate support for active substances, and the surface of MOR with smaller sizes of CdS nanoparticles, ZnS nanoparticles and g-C3N4 nanosheets, which increased the specific surface area of the materials and improved the reactivity. The porous structure of MOR is favorable for the enrichment of RhB, and the electric field effect of MOR leads to the decrease of the photogenerated carrier complex rate in the semiconductor, which increases the catalytic efficiency. In addition, the double Z charge transfer mechanism formed by CdS, ZnS, g-C3N4 is favorable for separating photogenerated carriers. These synergistic effects improved the photocatalytic efficiency. This strategy will be a green and promising solution to water pollution and energy crisis.

Structure engineering of nickel silicate/carbon composite with boosted electrochemical performances for hybrid supercapacitors.

In the wake of the carbon-neutral era, the exploration of innovative materials for energy storage and conversion has garnered increasing attention. While nickel silicates have been a focal point in energy storage research, their application in supercapacitors (SCs) has been relatively underreported due to poor conductivity. A newly designed architecture, designated as rGO@NiSiO@NiO/C (abbreviated for reduced graphene oxide (rGO), nickel silicate (NiSiO), nickel oxide/carbon (NiO/C)), has been developed to enhance the electrochemical performance of NiSiO. The incorporation of inner rGO provides structural support for NiSiO, enhancing conductivity, while the outer NiO/C layer not only boosts conductivity but also safeguards NiSiO from structural degradation and electrolyte dissolution. This architecture eliminates multi-phase mixtures, facilitating rapid electron/mass transfer kinetics and accelerating electrochemical reactions, resulting in exceptional electrochemical properties. The rGO@NiSiO@NiO/C architecture achieves a specific capacitance of 324F·g-1 at 0.5 A·g-1, with a superb cycle performance of âˆ¼ 91 % after 10,000 cycles, surpassing state-of-the-art nickel silicates. Furthermore, the hybrid supercapacitor (HSC) device incorporating the rGO@NiSiO@NiO/C electrode attains an areal capacitance of 159 mF·cm-2 at 2.5 mA·cm-2, a retention ratio of âˆ¼ 98 % after 10,000 cycles, and an energy density of 0.68 Wh·m-2 (26.7 Wh·kg-1) at 3.4 W·m-2 (343.8 W·kg-1). This study presents a layer-by-layer approach for constructing transition metal silicates/C architectures to enhance their electrochemical performance.

Surface engineering of zinc plate by self-growth three-dimensional-interconnected zinc silicate nanosheets effectively guiding the deposition of zinc ion for aqueous Zn metal battery.

Among battery technologies, aqueous zinc ion batteries (AZIBs) have hit between the eyes in the next generation of extensive energy storage devices due to their outstanding superiority. The main problem that currently restricts the development of AZIBs is how to obtain stable Zn anodes. In this study, taking the improvement of a series of problems caused by the physically attached artificial interfacial layer on Zn anode as a starting point, a nanosheet morphology of ZnSiO3 (denoted as ZnSi) is constructed by self-growth on Zn foil (Zn@ZnSi) by a simple hydrothermal reaction. The ZnSi nano-interfacial layer effectively slices the surface of the Zn foil into individual microscopic interfacial layers, constructing abundant pores. The nanosheets of Zn@ZnSi construct rich nanoscale Zn2+ transport channels, which provide higher electron and ion transport paths, thus achieving the effect of effectively homogenizing the electric field distribution and decreasing the local current density. Thanks to its inherent and structural properties, the Zn@ZnSi anode has a high specific capacity and good cycling stability compared with the Zn electrode. The lifetime of the Zn@ZnSi//Zn@ZnSi symmetric cell is much higher than that of the Zn//Zn symmetric cell at 1 mA cm-2. The capacity of the Zn@ZnSi//NH4V4O10 full cell can still reach 98 mAh g-1 after 1000 cycles at 1 A/g. The low-cost and scalable synthesis of ZnSi nano-interfacial layer on Zn is expected to provide new perspectives on interfacial engineering for Zn anodic protection.

Concerning for the solvent-polarity-dependent conformational equilibrium and ESIPT mechanism in Pz3HC system: A novel insight.

In this report, we propose a new insight into the interaction between the solvent-polarity-dependent conformational equilibrium and excited state intramolecular proton transfer (ESIPT) behavior of Pz3HC system in four different polar solvents (polarity order: ACN > THF > TOL > CYC). Using quantum chemistry method, we first announce a coexistence mechanism between Pz3HC-1 and Pz3HC-3 in the ground state in four solvents based on the Boltzmann distribution. In particular, Pz3HC-1 is the principal configuration in non-polar solvent, but Pz3HC-3 is the principal configuration in polar solvent. In addition, the simulated fluorescence spectra interprets the negative solvatochromism effect of Pz3HC-1 and Pz3HC-3 in four solvents. The evidence from intramolecular hydrogen bonding (IHB) parameters and electronic perspective collectively confirms the light-induced IHB enhancement and intramolecular charge transfer (ICT) properties in Pz3HC-1 and Pz3HC-3, which raises the likelihood of the ESIPT process. Combining the calculation of potential energy curve (PEC) and intrinsic reaction coordinate (IRC), we demonstrate that the ESIPT ease of Pz3HC-1 in different polar solvents obeys the order of CYC > TOL > THF > ACN, while the order of ESIPT ease in Pz3HC-3 is opposite. Notably, the ESIPT process of Pz3HC-3 in CYC solvent is accompanied by the twisted intramolecular charge transfer (TICT) process. In addition, we also reveal that the enol* and keto* fluorescence peaks of Pz3HC-3 in CYC solvent are quenched by ISC and TICT process, respectively. Our work not only provides a satisfactory explanation of the novel dynamics mechanism for Pz3HC system, but also brings light to the design and application of new sensing molecules in the future.

One-step hydrothermal synthesis of vanadium dioxide/carbon core-shell composite with improved ammonium ion storage for aqueous ammonium-ion battery.

Aqueous nonmetallic ion batteries have garnered significant interest due to their cost-effectiveness, environmental sustainability, and inherent safety features. Specifically, ammonium ion (NH4+) as a charge carrier has garnered more and more attention recently. However, one of the persistent challenges is enhancing the electrochemical properties of vanadium dioxide (VO2) with a tunnel structure, which serves as a highly efficient NH4+ (de)intercalation host material. Herein, a novel architecture, wherein carbon-coated VO2 nanobelts (VO2@C) with a core-shell structure are engineered to augment NH4+ storage capabilities of VO2. In detail, VO2@C is synthesized via the glucose reduction of vanadium pentoxide under hydrothermal conditions. Experimental results manifest that the introduction of the carbon layer on VO2 nanobelts can enhance mass transfer, ion transport and electrochemical kinetics, thereby culminating in the improved NH4+ storage efficiency. VO2@C core-shell composite exhibits a remarkable specific capacity of ∼300 mAh/g at 0.1 A/g, which is superior to that of VO2 (∼238 mAh/g) and various other electrode materials used for NH4+ storage. The NH4+ storage mechanism can be elucidated by the reversible NH4+ (de)intercalation within the tunnel of VO2, facilitated by the dynamic formation and dissociation of hydrogen bonds. Furthermore, when integrated into a full battery with polyaniline (PANI) cathode, the VO2@C//PANI full battery demonstrates robust electrochemical performances, including a specific capacity of ∼185 mAh·g-1 at 0.2 A·g-1, remarkable durability of 93 % retention after 1500 cycles, as well as high energy density of 58 Wh·kg-1 at 5354 W·kg-1. This work provides a pioneering approach to design and explore composite materials for efficient NH4+ storage, offering significant implications for future battery technology enhancements.

Mild steam treatment: Enhancing the rehydration performance of instant rice noodles by changing the physicochemical properties and gel structure of rice starch.

The "instant" quality of instant rice noodles is significantly affected by slow rehydration during cooking. This happens as a result of the native rice starch's low ability to gelatinize as well as the high shear and pressure utilized in industries during the widely used extrusion molding process. In order to address this issue, the rice flour was pretreated with mild steam (MS) technology. The results revealed that the rehydration qualities of the rice noodles that were extruded from the steam-treated flour significantly improved. There was a reduction of 25.5% in the rehydration time, from 443 to 330 s. The MS-treated rice starch's peak viscosity increased to 4503 from 4044 mPa/s. Decreases in gelatinization enthalpy (ΔH) and short-range ordering also suggest a reduction in difficulty in accomplishing starch gelatinization. Scanning electron microscopy studies showed particle aggregation increased as the treatment duration lasted longer. In conclusion, our findings indicate that we successfully addressed the issue of slow rehydration in instant rice noodles while presenting a novel approach for their manufacturing in the manufacturing sector.

Topochemical behavior of ferrocene embedded in V2O5·nH2O with weak hydrogen bonding enhancing ammonium-ion storage.

Aqueous ammonium ion batteries (AAIBs) are garnering increasing attention due to their utilization of abundant resources, cost-effectiveness, safety, and unique energy storage mechanism. The pursuit of high-performance cathode materials has become a pressing issue. In this study, we propose and synthesize ferrocene-embedded hydrated vanadium pentoxide (Fer/VOH) for implementation in AAIBs. The inclusion of ferrocene serves to expand the interlayer spacing, mitigate interlayer forces, and introduce the electron-rich environment characteristic of ferrocene. This augmentation facilitates the creation of additional oxygen vacancies, substantially enhancing the capacity and efficiency of ammonium ion storage. Notably, our investigation reveals that the incorporation of ferrocene attenuates the hydrogen bonding interactions associated with ammonium ions, rendering them more amenable to the interlayer embedding and release processes. Building upon these advantages, Fer/VOH exhibits a specific capacity of 313 mAh/g at a current density of 0.2 A/g, representing the highest reported performance among vanadium oxides utilized in AAIBs to date. Even after 2000 charge/discharge cycles at a current density of 2 A/g, Fer/VOH maintains a reversible specific capacity of 89 mAh/g, with a capacity retention rate of 54.8%. This study confirms the viability of Fer/VOH as a cathode material for AAIBs and offers a novel approach to enhancing the electrical conductivity and diminishing the hydrogen bonding forces in vanadium oxide intercalation through the embedding of electron-rich species and positronic groups.

VoxelTrack: Multi-Person 3D Human Pose Estimation and Tracking in the Wild.

We present VoxelTrack for multi-person 3D pose estimation and tracking from a few cameras which are separated by wide baselines. It employs a multi-branch network to jointly estimate 3D poses and re-identification (Re-ID) features for all people in the environment. In contrast to previous efforts which require to establish cross-view correspondence based on noisy 2D pose estimates, it directly estimates and tracks 3D poses from a 3D voxel-based representation constructed from multi-view images. We first discretize the 3D space by regular voxels and compute a feature vector for each voxel by averaging the body joint heatmaps that are inversely projected from all views. We estimate 3D poses from the voxel representation by predicting whether each voxel contains a particular body joint. Similarly, a Re-ID feature is computed for each voxel which is used to track the estimated 3D poses over time. The main advantage of the approach is that it avoids making any hard decisions based on individual images. The approach can robustly estimate and track 3D poses even when people are severely occluded in some cameras. It outperforms the state-of-the-art methods by a large margin on four public datasets including Shelf, Campus, Human3.6 M and CMU Panoptic.

Facile production of low-viscosity mung bean starch through cold plasma treatment: Improvement of film formability.

Mung bean starch (MBS) has a strong potential to be used as food packages. However, preparing tough and uniform MBS films via industrial casting remains challenging due to the high viscosity of MBS slurry. Herein, MBS was modified by using dielectric barrier discharge cold plasma (CP) in an attempt to decrease its viscosity and improve the film-forming properties. Results indicated that CP with an applied power of 120 W for 5 min decreased the peaking viscosity of MBS slurry from 2936.5 to 466.3 cP. Moreover, CP treatment simultaneously modified the crystallinity (20.2%-16.7%), amylose content (30.5%-44.3%), and short-range orders (1.04-0.85). CP also broke the protective envelope of MBS granules. Further, the film-forming properties of MBS were investigated. It was observed that CP-modified MBS film casts exhibited uniform morphology, higher tensile strength (6.6-9.6 MPa), and improved thermal stability (89.0-100.8°C) compared with the untreated MBS film. The study indicates that the CP can be used as a green and facile technology to improve the properties of MBS films resulting in an efficient food packing material.

Asymmetric total synthesis strategies of halichlorine and pinnaic acid.

Halichlorine and pinnaic acid are structurally related natural alkaloids isolated from different marine organisms. These two marine alkaloids bearing a 6-azaspiro[4.5]decane skeleton demonstrate a wide range of biological effects. It is this kind of unique structure and potentially valuable biological activity that have prompted strong synthetic interest, making it a research focus in recent years. Since the first total synthesis of halichlorine and pinnaic acid completed by Danishefsky's group, many groups have reported their outstanding synthesis methods especially the asymmetric synthesis strategies. This review summarizes the asymmetric synthesis strategies of halichlorine and pinnaic acid using a 6-azaspiro[4.5]decane skeleton as the key intermediate, which can provide some guidance for related work.