RESUMEN
For Ag(I)-based photocatalysts, the photoreduction of Ag+ to metallic Ag is an unignorable issue, which is the major reason for their instability. If electrically neutral excitons rather than electrons were produced over Ag(I)-based photocatalysts, the photoreduction of Ag+ is expected to be greatly suppressed. To check this assumption, a Ag-based metal-organic framework containing pyrene, which is in favor of exciton production, is synthesized (denoted as Ag-PTS-BPY) and the structure is solved via single-crystal X-ray diffraction. Ag-PTS-BPY is applied in the photocatalytic selective oxidation of methyl phenyl sulfide, which displays high conversion and selectivity. As expected, no metallic Ag is formed after five cycles of reaction according to the results of X-ray diffraction, Fourier transform infrared, and X-ray photoelectron spectroscopy, and the high conversion is also maintained. The participation of excitons suppresses the involvement of electrons, which are believed to be the reason for the high stability of Ag-PTS-BPY.
RESUMEN
A convenient method to fabricate two-dimensional photonic quasicrystal microstructures was experimentally demonstrated by using a rotatable four-wedge prism. Two-dimensional eightfold symmetric quasicrystal microstructures are formed by two groups of twisted square lattices in a photorefractive crystal. The experimental devices of this method are simple and stable without complicated optical adjustment equipment. Optical-induced quasicrystal microstructures are analyzed and verified by magnified imaging and far-field diffraction pattern imaging. The method can be extended to fabricate more complex quasicrystal and moiré lattice microstructures. We numerically demonstrate that this method can be used to fabricate other complex photonic microstructures by using different multi-wedge prisms and adjusting the rotation angle properly.
RESUMEN
In this work, α-Fe2 O3 photoanode consisted of (110)-oriented α-Fe2 O3 single crystals were synthesized by a facile hydrothermal method. By using particular additive (C4 MimBF4 ) and regulation of hydrothermal reaction time, the Fe-25 consisted of a single-layer of highly crystalline (110)-oriented crystals with fewer grain boundaries, which was vertically grown on the substrate. As a result, the charge separation efficiency and photoelectrochemical (PEC) performance of Fe-25A (Fe-25 after dehydration treatment) have been greatly improved. Fe-25A yields a photocurrent of 1.34â mA cm-2 (1.23â V vs RHE) and an incident photon-to-current conversion efficiency (IPCE) of 31.95 % (380â nm). With the assistance of cobalt-phosphate water oxidation catalyst (Co-Pi), the PEC performance could be further improved by enhancing the holes transfer at electrode/electrolyte interface and inhibiting surface recombination. Fe-25A/Co-Pi yields a photocurrent of 2.67â mA cm-2 (1.23â V vs RHE) and IPCE value of 50.8 % (380â nm), which is 3.67 times and 2.39 times as that of Fe-2A/Co-Pi. Our work provides a simple method to fabricate highly efficient Fe2 O3 photoanodes consist of characteristic (110)-oriented single crystals with high crystallinity and high quality interface contact to enhance charge separation efficiencies.
RESUMEN
OBJECTIVE: Chronic pre-dialysis hyponatremia is not rare in maintenance hemodialysis (MHD) patients. However, the association between chronic pre-dialysis hyponatremia and mortality is uncertain due to multiple potential confounders such as hyperglycemia, fluid overload, and malnutrition. This study aimed to more comprehensively evaluate the association between chronic pre-dialysis hyponatremia and clinical outcomes in MHD patients. METHODS: We analyzed the data of 194 MHD patients with regular real-time measurements of pre-dialysis serum sodium from July 2015 to March 2021. Hyponatremia was defined as SNa ≤ 135 mmol/L and normonatremia as SNa > 135 mmol/L and < 145 mmol/L. We evaluated the association of baseline pre-dialysis serum sodium (SNa) and time-averaged SNa (TASNa) levels with all-cause mortality or new major adverse cardiovascular events (MACE) in MHD patients. Furthermore, the SNa levels were glucose, serum albumin, and fluid overload adjusted. The associations between SNa levels and all-cause mortality or new MACE were analyzed using time-varying Cox regression models. RESULTS: Among the total of 194 patients, 24 patients died and 45 new MACE occurred during a mean 35.2-month follow-up period. The baseline pre-dialysis SNa level was 137.1 ± 2.8 mmol/L (127-144 mmol/L). Kaplan-Meier survival analysis showed that there were no significant differences in all-cause mortality or new MACE between hyponatremia and normonatremia groups according to baseline pre-dialysis SNa or glucose-corrected SNa (gcSNa). The mean values of both TASNa and time-averaged glucose-corrected SNa (TAgcSNa) were 136.9 ± 2.4 mmol/L and 138.3 ± 2.0 mmol/L, respectively. Kaplan-Meier survival analysis showed that patients with pre-dialysis hyponatremia had higher all-cause mortality or new MACE compared with normonatremia patients whether grouped on TASNa or TAgcSNa. Cox models showed an increased risk of all-cause mortality and new MACE in MHD patients with pre-dialysis hyponatremia based on TASNa or TAgcSNa. Even after full adjustment including time-dependent age and dialysis vintage, gender, diabetes, time-averaged weight gain (TAWG), and serum albumin, patients with pre-dialysis hyponatremia based on TASNa (HR 2.89; 95% CI 1.18-7.04; model 3) or TAgcSNa (HR 5.03; 95% CI 1.87-13.57; model 3) had approximately twofold or fourfold greater risk of all-cause mortality, respectively, compared with those with normonatremia. The risk of new MACE was also significantly elevated in patients with pre-dialysis hyponatremia based on TASNa (HR 3.86; 95% CI 2.13-7.01; model 1) or TAgcSNa (HR 2.43; 95% CI 1.14-5.15; model 1). After adjustment for time-dependent age and dialysis vintage, gender, diabetes, TAWG, and serum albumin, patients with pre-dialysis hyponatremia based on TASNa (HR 2.33; 95% CI 1.16-4.68; model 3) had a higher risk of new MACE compared with those with normonatremia. CONCLUSIONS: Pre-dialysis time-averaged hyponatremia is independently associated with increased risks of all-cause mortality or new MACE in MHD patients. The baseline SNa level is not a predictor of clinical outcomes due to its variation over time. Hyperglycemia, fluid overload, and malnutrition do not have a significant impact on the risk association between chronic hyponatremia and all-cause mortality or new MACE in MHD patients.
Asunto(s)
Insuficiencia Cardíaca , Hiperglucemia , Hiponatremia , Desnutrición , Desequilibrio Hidroelectrolítico , Humanos , Hiponatremia/etiología , Diálisis/efectos adversos , Diálisis Renal/efectos adversos , Desequilibrio Hidroelectrolítico/etiología , Desnutrición/complicaciones , Albúmina Sérica , Insuficiencia Cardíaca/complicaciones , Enfermedad Crónica , Sodio , Glucosa , Hiperglucemia/complicacionesRESUMEN
ZnO, as an important semiconductor material, has attracted much attention due to its excellent physical properties, which can be widely used in many fields. Notably, the defects concentration and type greatly affect the intrinsic properties of ZnO. Thus, controllable adjustment of ZnO defects is particularly important for studying its photoelectric properties. In this work, we fabricated ZnO ceramics (ZnO(C)) with different defects through spark plasma sintering (SPS) process by varying sintering temperature and using reduction environment. The experimental results indicate that the changes of color and light absorption in as-prepared ZnO originate from the different kinds of defects, i.e., oxygen vacancies (VO), interstitial zinc (Zni), and Zinc vacancies (VZn). Moreover, with the increase in calcination temperature, the concentration of oxygen defects and interstitial zinc defects in the ceramics increases gradually, and the conductivity of the ceramics is also improved. However, too many defects are harmful to the photoelectrochemical properties of the ceramics, and the appropriate oxygen defects can improve the utilization of visible light.
RESUMEN
A zirconium-based metal-organic framework containing boron (UiO-66-B) is prepared, which displays efficient photocatalytic H2O2 production. The H2O2 evolution rate is about 1002 µmol g-1 h-1, much higher than that of most known photocatalysts. Pristine UiO-66 displays a much lower activity (314 µmol g-1 h-1) under the same conditions, suggesting the significant role of boron. Both theoretical calculations and the combined experimental results verify the above conclusion, and the role of boron is ascribed to the following aspects: (1) enhanced O2 adsorption, (2) highly selective proton-coupled two-electron transfer, (3) faster carrier separation and surface charge transfer, and (4) faster generation but slower decomposition rates of H2O2. This work highlights key factors in the two-electron O2 reduction reaction (ORR), presents a deeper understanding of the role of boron in enhancing H2O2 production, and provides a new strategy for designing photocatalysts with excellent H2O2 evolution efficiency.
RESUMEN
Monoclinic bismuth vanadate (BiVO4) is an attractive material with which to fabricate photoanodes due to its suitable band structure and excellent photoelectrochemical (PEC) performance. However, the poor PEC stability originating from its severe photo-corrosion greatly restricts its practical applications. In this paper, pristine and Mo doped BiVO4 ceramics were prepared using the spark plasma sintering (SPS) method, and their photoelectrochemical properties as photoanodes were investigated. The as-prepared 1% Mo doped BiVO4 ceramic (Mo-BVO (C)) photoanode exhibited enhanced PEC stability compared to 1% Mo doped BiVO4 films on fluorine doped Tin Oxide (FTO) coated glass substrates (Mo-BVO). Mo-BVO (C) exhibited a photocurrent density of 0.54 mA/cm2 and remained stable for 10 h at 1.23 V vs. reversible hydrogen electrode (RHE), while the photocurrent density of the Mo-BVO decreased from 0.66 mA/cm2 to 0.11 mA/cm2 at 1.23 V vs. RHE in 4 h. The experimental results indicated that the enhanced PEC stability of the Mo-BVO (C) could be attributed to its higher crystallinity, which could effectively inhibit the dissociation of vanadium in BiVO4 during the PEC process. This work may illustrate a novel ceramic design for the improvement of the stability of BiVO4 photoanodes, and might provide a general strategy for the improvement of the PEC stability of metal oxide photoanodes.
RESUMEN
Surface engineering is of importance to reduce the reaction barrier of oxygen evolution reaction (OER). Herein, the NiFe Prussian blue analogue (NiFe-PBA)-F catalyst with a multilevel structure was obtained from NiFe-PBAs via a fluorination strategy, which presents an ultralow OER overpotential of 190 mV at 10 mA cm-2 in alkaline solution, with a small Tafel slope of 57 mV dec-1 and excellent stability. Interestingly, surface fluorination engineering could achieve a controllable removal of ligands of the cyan group, contributing to keep the framework structure of NiFe-PBAs. Particularly, NiFe-PBAs-F undergoes a dramatic reconstruction with the dynamic migration of F ions, which creates more active sites of F-doped NiFeOOH and affords more favorable adsorption of oxygen intermediates. Density functional theory calculations suggest that F doping increases the state density of Ni 3d orbital around the Fermi level, thus improving the conductivity of NiFeOOH. Furthermore, based on our experimental results, the lattice oxygen oxidation mechanism for NiFe-PBAs-F was proposed. Our work not only provides a new pathway to realize the controllable pyrolysis of NiFe-PBAs but also gives more insights into the reconstruction and the mechanism for the OER process.