Coherent interfaces govern direct transformation from graphite to diamond.

Understanding the direct transformation from graphite to diamond has been a long-standing challenge with great scientific and practical importance. Previously proposed transformation mechanisms1-3, based on traditional experimental observations that lacked atomistic resolution, cannot account for the complex nanostructures occurring at graphite-diamond interfaces during the transformation4,5. Here we report the identification of coherent graphite-diamond interfaces, which consist of four basic structural motifs, in partially transformed graphite samples recovered from static compression, using high-angle annular dark-field scanning transmission electron microscopy. These observations provide insight into possible pathways of the transformation. Theoretical calculations confirm that transformation through these coherent interfaces is energetically favoured compared with those through other paths previously proposed1-3. The graphite-to-diamond transformation is governed by the formation of nanoscale coherent interfaces (diamond nucleation), which, under static compression, advance to consume the remaining graphite (diamond growth). These results may also shed light on transformation mechanisms of other carbon materials and boron nitride under different synthetic conditions.

Hierarchically structured diamond composite with exceptional toughness.

The well known trade-off between hardness and toughness (resistance to fracture) makes simultaneous improvement of both properties challenging, especially in diamond. The hardness of diamond can be increased through nanostructuring strategies1,2, among which the formation of high-density nanoscale twins - crystalline regions related by symmetry - also toughens diamond2. In materials other than diamond, there are several other promising approaches to enhancing toughness in addition to nanotwinning3, such as bio-inspired laminated composite toughening4-7, transformation toughening8 and dual-phase toughening9, but there has been little research into such approaches in diamond. Here we report the structural characterization of a diamond composite hierarchically assembled with coherently interfaced diamond polytypes (different stacking sequences), interwoven nanotwins and interlocked nanograins. The architecture of the composite enhances toughness more than nanotwinning alone, without sacrificing hardness. Single-edge notched beam tests yield a toughness up to five times that of synthetic diamond10, even greater than that of magnesium alloys. When fracture occurs, a crack propagates through diamond nanotwins of the 3C (cubic) polytype along {111} planes, via a zigzag path. As the crack encounters regions of non-3C polytypes, its propagation is diffused into sinuous fractures, with local transformation into 3C diamond near the fracture surfaces. Both processes dissipate strain energy, thereby enhancing toughness. This work could prove useful in making superhard materials and engineering ceramics. By using structural architecture with synergetic effects of hardening and toughening, the trade-off between hardness and toughness may eventually be surmounted.

Electronegativity and chemical hardness of elements under pressure.

SignificanceOver the years, many unusual chemical phenomena have been discovered at high pressures, yet our understanding of them is still very fragmentary. Our paper addresses this from the fundamental level by exploring the key chemical properties of atoms-electronegativity and chemical hardness-as a function of pressure. We have made an appropriate modification to the definition of Mulliken electronegativity to extend its applicability to high pressures. The change in atomic properties, which we observe, allows us to provide a unified framework explaining (and predicting) many chemical phenomena and the altered behavior of many elements under pressure.

Hard Copper Boride with Exceptional Conductivity.

Copper and boron seldom engage in reaction at ambient pressure. The few reports on copper-doped boron compounds that exist in the literature often lack definitive stoichiometry. Here, we report successful synthesis of Cu_{2-δ}B_{25} single crystals (δ∼0.03, indicating Cu understoichiometry) via a high-pressure melting method using copper and ß-rhombohedral boron as precursors. Crystals thus synthesized are characterized by a tetragonal boron sublattice, within which Cu atoms are either partially or fully situated at different interstices between B_{12} icosahedra. The crystals possess a high Vickers hardness of 26.5 GPa and an unusually high electrical conductivity of 1.19×10^{5} S/m-the highest conductivity among the icosahedron-based borides. Hall measurements reveal a notable p-n conduction type transition around 30 GPa. This transition, alongside the remarkable conductivity, is potentially modulated by the copper content and its valence states within the structure. The synthesis of Cu_{2-δ}B_{25} not only broadens the spectrum of hard materials but also opens new avenues for innovative modulation of electronic properties in boron-rich compounds, with promising technological implications.

Superconductivity in Diamond-Like BC15.

Advancing the compositional space of a compound class can result in intriguing superconductors, such as LaH10. Herein, we performed a comprehensive first-principles structural search on a binary B-C system with various chemical compositions. The identified diamond-like BC15, named d-BC15, is thermodynamically superior to the synthesized BC3 and BC5. Interestingly, d-BC15 shows anisotropic superconductivity resulting from three distinct Fermi surfaces. Its predicted critical temperature (Tc) is 43.6 K at ambient pressure, beyond the McMillan limit. d-BC15 reaches a maximum of around 75 K at 0.43% hole doping due to the substantially enhanced density of states at the Fermi level. Additionally, d-BC15 demonstrates superhard characteristics with a Vickers hardness of 75 GPa. The calculated tensile and shear stresses are 72 and 73 GPa, respectively. The combination of high superconductivity and superhardness in d-BC15 offers new insights into the design of multifunctional materials.

Recent advance of ATP citrate lyase inhibitors for the treatment of cancer and related diseases.

ATP citrate lyase (ACLY), a strategic metabolic enzyme that catalyzes the glycolytic to lipidic metabolism, has gained increasing attention as an attractive therapeutic target for hyperlipidemia, cancers and other human diseases. Despite of continual research efforts, targeting ACLY has been very challenging. In this field, most reported ACLY inhibitors are "substrate-like" analogues, which occupied with the same active pockets. Besides, some ACLY inhibitors have been disclosed through biochemical screening or high throughput virtual screening. In this review, we briefly summarized the cancer-related functions and the recent advance of ACLY inhibitors with a particular focus on the SAR studies and their modes of action. We hope to provide a timely and updated overview of ACLY and the discovery of new ACLY inhibitors.

Ultrahigh-Pressure Magnesium Hydrosilicates as Reservoirs of Water in Early Earth.

The origin of water on the Earth is a long-standing mystery, requiring a comprehensive search for hydrous compounds, stable at conditions of the deep Earth and made of Earth-abundant elements. Previous studies usually focused on the current range of pressure-temperature conditions in the Earth's mantle and ignored a possible difference in the past, such as the stage of the core-mantle separation. Here, using ab initio evolutionary structure prediction, we find that only two magnesium hydrosilicate phases are stable at megabar pressures, α-Mg_{2}SiO_{5}H_{2} and ß-Mg_{2}SiO_{5}H_{2}, stable at 262-338 GPa and >338 GPa, respectively (all these pressures now lie within the Earth's iron core). Both are superionic conductors with quasi-one-dimensional proton diffusion at relevant conditions. In the first 30 million years of Earth's history, before the Earth's core was formed, these must have existed in the Earth, hosting much of Earth's water. As dense iron alloys segregated to form the Earth's core, Mg_{2}SiO_{5}H_{2} phases decomposed and released water. Thus, now-extinct Mg_{2}SiO_{5}H_{2} phases have likely contributed in a major way to the evolution of our planet.

Novel magnesium borides and their superconductivity.

With the motivation of searching for new superconductors in the Mg-B system, we performed ab initio evolutionary searches for all the stable compounds in this binary system in the pressure range of 0-200 GPa. We found previously unknown, yet thermodynamically stable, compositions MgB3 and Mg3B10. Experimentally known MgB2 is stable in the entire pressure range 0-200 GPa, while MgB7 and MgB12 are stable at pressures below 90 GPa and 35 GPa, respectively. We predict a reentrant behavior for MgB4, which becomes unstable against decomposition into MgB2 and MgB7 at 4 GPa and then becomes stable above 61 GPa. We find ubiquity of phases with boron sandwich structures analogous to the AlB2-type structure. However, with the exception of MgB2, all other magnesium borides have low electron-phonon coupling constants λ of 0.32-0.39 and are predicted to have Tc below 3 K.

Phagraphene: A Low-Energy Graphene Allotrope Composed of 5-6-7 Carbon Rings with Distorted Dirac Cones.

Using systematic evolutionary structure searching we propose a new carbon allotrope, phagraphene [fæ'græfi:n], standing for penta-hexa-hepta-graphene, because the structure is composed of 5-6-7 carbon rings. This two-dimensional (2D) carbon structure is lower in energy than most of the predicted 2D carbon allotropes due to its sp(2)-binding features and density of atomic packing comparable to graphene. More interestingly, the electronic structure of phagraphene has distorted Dirac cones. The direction-dependent cones are further proved to be robust against external strain with tunable Fermi velocities.

A novel phase of beryllium fluoride at high pressure.

A previously unknown thermodynamically stable high-pressure phase of BeF2 has been predicted using the evolutionary algorithm USPEX. This phase occurs in the pressure range 18-27 GPa. Its structure has C2/c space group symmetry and contains 18 atoms in the primitive unit cell. Given the analogy between BeF2 and SiO2, silica phases have been investigated as well, but the new phase has not been observed to be thermodynamically stable for this system. However, it is found to be metastable and to have comparable energy to the known metastable phases of SiO2, suggesting a possibility of its synthesis.

Crystal structure prediction and its application in Earth and materials sciences.

Evolutionary algorithms, based on physically motivated forms of variation operators and local optimization, proved to be a powerful approach in determining the crystal structure of materials. This review summarized the recent progress of the USPEX method as a tool for crystal structure prediction. In particular, we highlight the methodology in (1) prediction of molecular crystal structures and (2) variable-composition structure predictions, and their applications to a series of systems, including Mg(BH4)2, Xe-O, Mg-O compounds, etc. We demonstrate that this method has a wide field of applications in both computational materials design and studies of matter at extreme conditions.

New reconstructions of the (110) surface of rutile TiO2 predicted by an evolutionary method.

Reconstructions of the (110) surface of rutile TiO2 (the dominant surface of this important mineral and catalyst) are investigated using the evolutionary approach, resolving previous controversies. Depending on thermodynamic conditions, four different stable reconstructions are observed for this surface. We confirm the recently proposed "Ti2O3-(1×2)" and "Ti2O-(1×2)" reconstructions and predict two new reconstructions "Ti3O2-(1×2)" and "Ti3O3-(2×1)," which match experimental results. Furthermore, we find that surface electronic states are sensitive to reconstructions and, therefore, depend on thermodynamic conditions.

Unexpected reconstruction of the α-boron (111) surface.

We report a novel reconstruction of the α-boron (111) surface, discovered using ab initio evolutionary structure prediction, and show that this unexpected neat structure has a much lower energy than the recently proposed (111)-I(R,(a)) surface. In this reconstruction, all single interstitial boron atoms bridge neighboring B(12) icosahedra by polar covalent bonds, and this satisfies the electron counting rule, leading to the reconstruction-induced metal-semiconductor transition. The peculiar charge transfer between the interstitial atoms and the icosahedra plays an important role in stabilizing the surface.

[Infect of pingshen decoction on serum HGF, Cys C and TGF-beta1 diabetic nephropathy in early stage].

Study the serum level of HGF, Cys C and TGF-beta1 in type 2 diabetic nephropathy (DN), the infect of Pingshen decoction on those index. Selected 69 cases of 2 type DN and randomly divided into therapy group (36 cases) and control group (33 cases). The therapy group were treated with Pingshen decoction 1 dose/d, bid po. The control group were treated with NephritisShu tablet, 6 tablet, tid po. 8 weeks was a course. Before and after treatment, we examine the serum level of HGF, Cys C and TGF-beta1 by ELISA and immunonephelometry, and compare with 30 cases of healthy control group. The study demonstrates that before treatment, the serum level of HGF in both groups were significantly lower than healthy control group (P < 0.01), but Cys C, TGF-beta1 were significantly higher (P < 0.01). After treatment, the serum level of HGF of both groups were increased. The serum level of HGF of therapy group were significantly higher than of control group (P < 0.01), but the serum level of Cys C and TGF-beta1 were significantly lower than control group (P < 0.01). The serum level of HGF was correlated negatively with Cys C,TGF-beta1. In control group, the UAER, urine beta2-MG and quantity of 24-hour urine protein were significantly decreased after treatment (P < 0.01). The index of urine of therapy group were significantly lower than control group (P < 0.01). Results indicate that test of serum level of HGF and Cys C,TGF-beta1 of diabetic nephropathy have important clinical significance. Pingshen decoction can effectively intervene in the serum level of HGF and Cys C, TGF-beta1 and index of urine.

Gut microbiota modulating intestinal stem cell differentiation.

Proliferation and differentiation of intestinal stem cell (ISC) to replace damaged gut mucosal epithelial cells in inflammatory states is a critical step in ameliorating gut inflammation. However, when this disordered proliferation continues, it induces the ISC to enter a cancerous state. The gut microbiota on the free surface of the gut mucosal barrier is able to interact with ISC on a sustained basis. Microbiota metabolites are able to regulate the proliferation of gut stem and progenitor cells through transcription factors, while in steady state, differentiated colonocytes are able to break down such metabolites, thereby protecting stem cells at the gut crypt. In the future, the gut flora and its metabolites mediating the regulation of ISC differentiation will be a potential treatment for enteropathies.

First-principles determination of the structure of magnesium borohydride.

The energy landscape of Mg(BH(4))(2) under pressure is explored by ab initio evolutionary calculations. Two new tetragonal structures, with space groups P4 and I4(1)/acd, are predicted to be lower in enthalpy by 15.4 and 21.2 kJ/mol, respectively, than the earlier proposed P4(2)nm phase. We have simulated x-ray diffraction spectra, lattice dynamics, and equations of state of these phases. The density, volume contraction, bulk modulus, and simulated x-ray diffraction patterns of I4(1)/acd and P4 structures are in excellent agreement with the experimental results.

Discovery of carbon-based strongest and hardest amorphous material.

Carbon is one of the most fascinating elements due to its structurally diverse allotropic forms stemming from its bonding varieties (sp, sp 2 and sp 3). Exploring new forms of carbon has been the eternal theme of scientific research. Herein, we report on amorphous (AM) carbon materials with a high fraction of sp 3 bonding recovered from compression of fullerene C60 under high pressure and high temperature, previously unexplored. Analysis of photoluminescence and absorption spectra demonstrates that they are semiconducting with a bandgap range of 1.5-2.2 eV, comparable to that of widely used AM silicon. Comprehensive mechanical tests demonstrate that synthesized AM-III carbon is the hardest and strongest AM material known to date, and can scratch diamond crystal and approach its strength. The produced AM carbon materials combine outstanding mechanical and electronic properties, and may potentially be used in photovoltaic applications that require ultrahigh strength and wear resistance.

Novel superhard carbon: C-centered orthorhombic C8.

A novel carbon allotrope of C-centered orthorhombic C(8) (Cco-C(8)) is predicted by using a recently developed particle-swarm optimization method on structural search. Cco-C(8) adopts a sp(3) three-dimensional bonding network that can be viewed as interconnected (2,2) carbon nanotubes through 4- and 6-member rings and is energetically more favorable than earlier proposed carbon polymorphs (e.g., M carbon, bct-C(4), W carbon, and chiral C(6)) over a wide range of pressures studied (0-100 GPa). The simulated x-ray diffraction pattern, density, and bulk modulus of Cco-C(8) are in good accordance with the experimental data on structurally undetermined superhard carbon recovered from cold compression of carbon nanotube bundles. The simulated hardness of Cco-C(8) can reach a remarkably high value of 95.1 GPa, such that it is capable of cracking diamond.

Universal phase transitions of B1-structured stoichiometric transition metal carbides.

The high-pressure phase transitions of B1-structured stoichiometric transition metal carbides (TMCs, TM = Ti, Zr, Hf, V, Nb, and Ta) were systematically investigated using ab initio calculations. These carbides underwent universal phase transitions along two novel phase-transition routes, namely, B1 → distorted TlI (TlI') → TlI and/or B1 → distorted TiB (TiB') → TiB, when subjected to pressure. The two routes can coexist possibly because of the tiny enthalpy differences between the new phases under corresponding pressures. Four new phases result from atomic slips of the B1-structured parent phases under pressure. After completely releasing the pressure, taking TiC as representative of TMCs, only its new TlI'-type phase is mechanically and dynamically stable, and may be recovered.

Low-energy 3D sp2 carbons with versatile properties beyond graphite and graphene.

Carbon materials with full sp2-hybridized bonding, e.g. zero-dimensional (0D) fullerenes, 1D carbon nanotubes, and 2D graphene, possess outstanding and unparalleled properties, and have unique scientific and technological importance. The theoretical design and experimental exploration of other types of novel sp2 carbon allotropes, especially with 3D architectures, is always a compelling scientific theme. Here we proposed a class of low-energy 3D sp2 carbons with exceptional properties, not only possessing excellent mechanical properties such as high 3D strength, rubber-like ultra-stretchability, and negative Poisson's ratio, but also including the electronic properties of graphite-like metallicity and graphene-like Dirac cone, which are the desirable properties across a broad range of potential applications. Furthermore, a design route was suggested to access these 3D sp2 carbons by the polymerization of edge-functionalized graphene nanoribbon arrays.