Identification the Role of Grain Boundaries in Polycrystalline Photovoltaics via Advanced Atomic Force Microscope.

Atomicforce microscopy (AFM)-based scanning probing techniques, including Kelvinprobe force microscopy (KPFM) and conductive atomic force microscopy (C-AFM), have been widely applied to investigate thelocal electromagnetic, physical, or molecular characteristics of functional materials on a microscopic scale. The microscopic inhomogeneities of the electronic properties of polycrystalline photovoltaic materials can be examined by these advanced AFM techniques, which bridge the local properties of materials to overall device performance and guide the optimization of the photovoltaic devices. In this review, the critical roles of local optoelectronic heterogeneities, especially at grain interiors (GIs) and grain boundaries (GBs) of polycrystalline photovoltaic materials, including versatile polycrystalline silicon, inorganic compound materials, and emerging halide perovskites, studied by KPFM and C-AFM, are systematically identified. How the band alignment and electrical properties of GIs and GBs affect the carrier transport behavior are discussed from the respective of photovoltaic research. Further exploiting the potential of such AFM-based techniques upon a summary of their up-to-date applications in polycrystalline photovoltaic materials is beneficial to acomprehensive understanding of the design and manipulation principles of thenovel solar cells and facilitating the development of the next-generation photovoltaics and optoelectronics.

Tin-Lead Perovskite Solar Cells with Preferred Crystal Orientation by Buried Interface Approach.

Mixed tin-lead perovskite solar cells (PSCs) have garnered much attention for their ideal bandgap and high environmental research value. However, poly (3,4-ethylenedioxythiophene): poly (styrene sulfonate) (PEDOT: PSS), widely used as a hole transport layer (HTL) for Sn-Pb PSCs, results in unsatisfactory power conversion efficiency (PCE) and long-term stability of PSCs due to its acidity and moisture absorption. A synergistic strategy by incorporating histidine (HIS) into the PEDOT: PSS HTL is applied to simultaneously regulate the nucleation and crystallization of perovskite (PVK). HIS neutralizes the acidity of PEDOT: PSS and enhances conductivity. Especially, the coordination of the C═N and -COO- functional groups in the HIS molecule with Sn2+ and Pb2+ induces vertical growth of PVK film, resulting in the release of residual surface stress. Additionally, this strategy also optimizes the energy level alignment between the perovskite layer and the HTL, which improves charge extraction and transport. With these cooperative effects, the PCE of Sn-Pb PSCs reaches 21.46% (1 sun, AM1.5), maintaining excellent stability under a nitrogen atmosphere. Hence, the buried interface approach exhibits the potential for achieving high-performance and stable Sn-Pb PSCs.

Ternary-Metal Sn-Pb-Zn Perovskite to Reconstruct Top Surface for Efficient and Stable Less-Pb Perovskite Solar Cells.

Though Sn-Pb alloyed perovskite solar cells (PSCs) achieved great progress, there is a dilemma to further increase Sn for less-Pb requirement. High Sn ratio (>70%) perovskite exhibits nonstoichiometric Sn:Pb:I at film surface to aggravate Sn2+ oxidation and interface energy mismatch. Here, ternary metal alloyed (FASnI3 )0.7 (MAPb1- x Znx I3 )0.3 (x = 0-3%) is constructed for Pb% < 30% perovskite. Zn with smaller ionic size and stronger ionic interaction than Sn/Pb assists forming high-quality perovskite film with ZnI6 4- enriched at surface to balance Sn:Pb:I ratio. Differing from uniform bulk doping, surface-rich Zn with lower lying orbits pushes down the energy band of perovskite and adjusts the interface energy for efficient charge transfer. The alloyed PSC realizes efficiency of 19.4% at AM1.5 (one of the highest values reported for Pb% < 30% PSCs). Moreover, stronger bonding of Zn─I and Sn─I contributes to better durability of ternary perovskite than binary perovskite. This work highlights a novel alloy method for efficient and stable less-Pb PSCs.

Multifunctional dual-interface layer enables efficient and stable inverted perovskite solar cells.

Considering that the hydrophobicity of PTAA as the surface of an inverted perovskite solar cell (PSC) substrate directly influences the crystallization and top surface properties of perovskite films, dual-interface engineering is a significant strategy to obtain excellent PSCs. PFN-Br was inserted into the PTAA/perovskite interface to ensure close interfacial contact and achieve exceptional crystallization, and then the perovskite top surface was covered with 3-PyAI to further improve its interface property. The mechanism of interaction of PFN-Br and 3-PyAI with perovskites was analyzed through various characterization methods. The results showed that the introduction of a hydrophilic interface layer reduces voids and defects at the bottom of the film. Additionally, the existence of 3-PyAI reduces surface defects, optimizes energy level alignment, and decreases non-radiative recombination, which is beneficial for charge transfer. Consequently, the open circuit voltage (VOC) and fill factor (FF) of the optimized device were greatly enhanced, and the champion device showed a power conversion efficiency (PCE) of 22.07%. The unencapsulated device with PFN-Br&3-PyAI can retain 80% of its initial performance after aging in the air atmosphere (25 °C at a relative humidity (RH) of 25%) for 27 days. Moreover, the reverse bias stability of the device was improved, with the reverse breakdown voltage (VRB) reaching -2 V. This work recommends a dual-interface strategy for efficient and reliable PTAA-based PSCs.

Urea additive improves the performance of low bandgap tin-lead perovskite solar cells.

Recently, narrow bandgap tin-lead mixed perovskite solar cells (PSCs) have become a research hotspot because they can be applied in tandem cells to break the Shockley-Queisser radiative limit of the single junction PSCs. However, the introduction of tin, on the one hand, makes the crystal quality of perovskite thin film worse, leading to the increase of film defects; on the other hand, the easy oxidation of divalent tin also leads to the increase of defect states, which seriously affects the photoelectric conversion efficiency of tin-lead cell devices. Good crystallization and low defect density of perovskite layer are very important to ensure good light absorption and photogenerated carrier generation and transport. Here, we adjust the crystallization of tin-lead perovskite films by a Lewis base-urea (CO(NH2)2), which significantly increases the grain size and improves the film morphology. At the same time, because of the Lewis base property of urea, the uncoordinated Pb2+and Sn2+defects of Lewis acids in the tin-lead films are effectively passivated, and the occurrence of non-radiative recombination in the films is reduced. Under the dual effects of improving crystallization and passivating defects, the photoelectric performance of tin-lead perovskite solar cell devices is significantly improved to 18.1% compared with the original device of 15.4%.

Rational design of formamidine tin-based perovskite solar cell with 30% potential efficiency via 1-D device simulation.

As a promising photovoltaic technology, halide perovskite solar cells (PSCs) have recently attracted wide attention. This work presents a systematic simulation of low bandgap formamidinium tin iodide (FASnI3)-based p-n heterojunction PSCs to investigate the effects of multiple optoelectronic variations on the photovoltaic performance. The structures of the simulated devices are n-i-p, electron transport layer-free (ETL-free), hole transport layer-free (HTL-free), and inverted HTL-free. The simulation is conducted with the Solar Cell Capacitance Simulator (SCAPS-1D). The power conversion efficiencies (PCEs) dramatically decrease when the acceptor doping density (NA) of the absorber layer exceeds 1016 cm-3. For all devices, the photovoltaic parameters dramatically decrease when the absorber defect density (Nt) is over 1015 cm-3, and the best absorber layer thickness is 1000 nm. It should be pointed out that the Nt and the interface defect layer (IDL) are the primary culprits that seriously affect the device performance. When the interfacial defect density (Nit) exceeds 1012 cm-3, PCEs begin to decline significantly. Therefore, paying attention to these defect layers is necessary to improve the PCE. Furthermore, the proper conduction band offset (CBO) between the electron transport layer (ETL) and absorber layer positively affects PSCs' performance. These simulation results help fabricate highly efficient and environment-friendly narrow bandgap PSCs.

Dependence of the Heterogeneity of Grain Boundaries on Adjacent Grains in Perovskites and Its Impact on Photovoltage.

In polycrystalline perovskites, grain boundaries (GBs) that isolate grains determine the optoelectronic properties of a semiconductor, and hence affect the photovoltaic performance of a solar cell. Photocurrent and photovoltage are affected by the microscopic structure of perovskites but are difficult to quantify on the intragrain length scale and are often treated as homogeneous within the photoactive layer. Here, the nanoscale through-film and lateral photoresponse of large-grained perovskite are studied by photoconductive atomic force microscopy. Photocurrent collection along GBs relies on the formation of adjacent grains, exhibiting GB to GB heterogeneity. Regarding to the spatially correlated heterogeneity, the photovoltage of grains deduced from the photoresponse curves at specific positions is larger than that of GBs by up to 0.4 V, suggesting that the photovoltage loss mainly originates from the shunting of GBs through the whole perovskite layer. These spatial heterogeneities are alleviated by depositing a capping layer onto the perovskite layer, highlighting the role of the inserted layer between the perovskite and electrode in real solar cells. This research reveals the heterogeneity of GBs and its influence on photovoltage that actually occurs in virtual solar cells, which is crucial for optimizing perovskite-based solar cells.

Aged sol-gel solution-processed texture tin oxide for high-efficient perovskite solar cells.

Mesoporous n-i-p perovskite solar cells (PeSCs) demonstrate attractive potential for obtaining high power conversion efficiencies (PCEs), by employing inorganic electron transport layers (ETLs). However, these ETLs composed of dual layers (a condense layer and a mesoporous layer) suffer the composite process and high sintering temperature. Here, we demonstrate a simple and efficient process to improve the device performance of PeSCs by using a textured SnO2 film. Self-aged sol-gel SnO2 solution after spin coating results in a textured structure without sacrificing the surface coverage. Excellent light trapping ability is achieved by optimizing the aged time of sol-gel SnO2 solution, which mimics the evolution of the conventional mesoporous layer. Such a SnO2 textured structure provides a large contact area for rapid charge extraction, and alleviates interfacial recombination loss. Therefore, this PeSC yields an optimal PCE of 19%, which is prominent in state-of-the-art SnO2-based devices. These results indicate that one-step solution processed SnO2 with a textured structure offers a simple and efficient way to improve the device performance of PeSCs without a complex process.

Ionic behavior of organic-inorganic metal halide perovskite based metal-oxide-semiconductor capacitors.

Organic-inorganic metal halide perovskites are promising semiconductors for optoelectronic applications. Despite the achievements in device performance, the electrical properties of perovskites have stagnated. Ion migration is speculated to be the main contributing factor for the many unusual electrical phenomena in perovskite-based devices. Here, to understand the intrinsic electrical behavior of perovskites, we constructed metal-oxide-semiconductor (MOS) capacitors based on perovskite films and performed capacitance-voltage (C-V) and current-voltage (I-V) measurements of the capacitors. The results provide direct evidence for the mixed ionic-electronic transport behavior within perovskite films. In the dark, there is electrical hysteresis in both the C-V and I-V curves because the mobile negative ions take part in charge transport despite frequency modulation. However, under illumination, the large amount of photoexcited free carriers screens the influence of the mobile ions with a low concentration, which is responsible for the normal C-V properties. Validation of ion migration for the gate-control ability of MOS capacitors is also helpful for the investigation of perovskite MOS transistors and other gate-control photovoltaic devices.

Influence of brewing conditions on taste components in Fuding white tea infusions.

BACKGROUND: White tea has received increasing attention of late as a result of its sweet taste and health benefits. During the brewing of white tea, many factors may affect the nutritional and sensory quality of the resulting infusions. The present study aimed to investigate the effect of various infusion conditions on the taste components of Fuding white tea, including infusion time, ratio of tea and water, number of brewing steps, and temperature. RESULTS: Brewing conditions had a strong effect on the taste compound profile and sensory characteristics. The catechin, caffeine, theanine and free amino acid contents generally increased with increasing infusion time and temperature. Conditions comprising an infusion time of 7 min, a brewing temperature of 100 °C, a tea and water ratio of 1:30 or 1:40, and a second brewing step, respectively, were shown to obtain the highest contents of most compounds. Regarding tea sensory evaluation, conditions comprising an infusion time of 3 min, a brewing temperature of 100 °C, a tea and water ratio of 1:50, and a first brewing step, resulted in the highest sensory score for comprehensive behavior of color, aroma and taste. CONCLUSION: The results of the present study reveal differences in the contents of various taste compounds, including catechins, caffeine, theanine and free amino acids, with respect to different brewing conditions, and sensory scores also varied with brewing conditions. © 2016 Society of Chemical Industry.

Effect of water quality on the main components in Fuding white tea infusions.

The aim of this study was to investigate the effect of water quality on the main components in Fuding white tea infusions, including catechins, caffeine, theanine and free amino acids. Pure, tap and spring water were tested, and water quality was found to have a distinct effect on the main compounds extracted. Pure water, which was weakly acidic and low in dissolved ions, achieved the highest catechin content, whereas caffeine and theanine, and amino acids, were higher in infusions made with spring and tap water, respectively. Sensory evaluation was performed to evaluate infusion colour, taste and aroma, and sensory quality was similarly influenced by water type, due primarily to differences in dissolved ions. Pure water was more suitable for brewing white tea with superior colour, aroma and taste.

CH3NH3PbI(3-x)Cl(x) films with coverage approaching 100% and with highly oriented crystal domains for reproducible and efficient planar heterojunction perovskite solar cells.

Depositing pinhole-free perovskite films is of vital importance for achieving high performance perovskite solar cells, especially in a planar heterojunction device. Here, perovskite films with coverage approaching 100% and with highly oriented crystal domains were obtained by carefully controlling the annealing temperature and duration. Perovskite solar cells with an average efficiency of 12% and a maximum efficiency of 15.17% were achieved in a planar heterojunction structure. Comprehensive characterization and analysis showed that appropriate annealing temperature and duration allowed the perovskite crystals to grow slowly, resulting in highly oriented crystal domains without any internal voids or pinholes. The anisotropic transport properties of perovskite crystals ensure efficient electron and hole transport to their corresponding electrodes.

A numerical study of the phase behaviors of drug particle/star triblock copolymer mixtures in dilute solutions for drug carrier application.

The complex microstructures of drug particle/ABA star triblock copolymer in dilute solutions have been investigated by a theoretical approach which combines the self-consistent field theory and the hybrid particle-field theory. Simulation results reveal that, when the volume fraction of drug particles is smaller than the saturation concentration, the drug particle encapsulation efficiency is 100%, and micelle loading capacity increases with increasing particle volume fraction. When the volume fraction of drug particles is equal to the saturation concentration, the micelles attain the biggest size, and micelle loading capacity reaches a maximum value which is independent of the copolymer volume fraction. When the volume fraction of drug particles is more than the saturation concentration, drug particle encapsulation efficiency decreases with increasing volume fraction of drug particles. Furthermore, it is found that the saturation concentration scales linearly with the copolymer volume fraction. The above simulation results are in good agreement with experimental results.

Polymer Lewis Base for Improving the Charge Transfer in Tin-Lead Mixed Perovskite Solar Cells.

The poor film stability of Sn-Pb mixed perovskite film and the mismatched interface energy levels pose significant challenges in enhancing the efficiency of tin-lead (Sn-Pb) mixed perovskite solar cells. In this study, polyvinylpyrrolidone (PVP) is introduced into the PVK perovskite precursor solution, effectively enhancing the overall stability of the film. This improvement is achieved through the formation of robust coordination bonds between the carbonyl (C=O) in the pyrrole ring and the undercoordinated SnII and PbII, thereby facilitating the passivation of defects. Furthermore, the introduction of PVP inhibits the oxidation of tin (Sn), thereby enhancing the n-type characteristics of the perovskite film. This adjustment in the energy level of the PVK perovskite film proves instrumental in reducing interface energy loss, subsequently improving interface charge transfer and mitigating device recombination. Consequently, perovskite solar cells incorporating PVP achieve an outstanding champion power conversion efficiency (PCE) of 21.31%.

Self-Assembled Monolayer Suppresses Interfacial Reaction between NiOx and Perovskite for Efficient and Stable Inverted Inorganic Perovskite Solar Cells.

Inorganic NiOx has attracted tremendous attention in organic-inorganic hybrid perovskite solar cells (PSCs) in recent years but is relatively less used in all-inorganic PSCs. In this study, we have discovered and confirmed the detrimental interfacial reaction between NiOx and DMAI-containing CsPbI3 inorganic perovskites. Thus, a self-assembled monolayer, Br-2PACz, is employed to modify the NiOx surface to obstruct the adverse interfacial reaction and further improve the device performance. The results demonstrate that Br-2PACz modification on NiOx can also improve interface contact, perovskite film morphology, and energy level alignments. Consequently, a champion power conversion efficiency (PCE) of 19.34% with a high open-circuit voltage (VOC) of 1.15 V is obtained for inverted NiOx/Br-2PACz-based CsPbI3 PSCs compared to the reference NiOx-based PSC with a moderate PCE of 15.16% (VOC 1.05 V). Moreover, the stabilities of both CsPbI3 films and devices exhibited significant enhancement after Br-2PACz modification. The unpacked PSCs could maintain 80, 73, and 89% of the initial efficiency after aging in 30-35% RH for 960 h, heating at 60 °C for 48 h, and continuous illumination for 284 h, respectively, highly superior to the reference devices. Our work offers a facile and effective approach for developing high-performance inverted NiOx-based CsPbI3 PSCs.

Efficient Air-Processed MA-Free Perovskite Solar Cells by SH-Based Silane Interface Modification.

Air-processed perovskite solar cells (PSCs) with high photoelectric conversion efficiency (PCE) can not only further reduce the production cost but also promote its industrialization. During the preparation of the PSCs in ambient air, the contact of the buried interface not only affects the crystallization of the perovskite film but also affects the interface carrier transport, which is directly related to the performance of the device. Here, we optimize the buried interface by introducing 3-mercaptopropyltrimethoxysilane (MPTMS, (CH3O)3Si(CH2)3SH) on the nickel oxide (NiOx) surface. The crystallization of the perovskite film is improved by enhancing surface hydrophobicity; besides, the SH-based functional group of MPTMS passivates the uncoordinated lead at the interface, which effectively reduces the defects at the bottom interface of perovskite and inhibits the nonradiative recombination at the interface. Moreover, the energy level between the NiOx layer and the perovskite layer is better matched. Based on multiple functions of MPTMS modification, the open circuit voltage of the device is obviously improved, and efficient air-processed methylamine-free (MA-free) PSCs are realized with PCE reaching 21.0%. The device still maintains the initial PCE of 85% after 1000 h aging in the glovebox. This work highlights interface modification in air-processed MA-free PSCs to promote the industrialization of PSCs.

Unveiling Local Current Behavior and Manipulating Grain Homogenization of Perovskite Films for Efficient Solar Cells.

Achieving high power conversion efficiency in perovskite solar cells (PSCs) heavily relies on fabricating homogeneous perovskite films. However, understanding microscopic-scale properties such as current generation and open-circuit voltage within perovskite crystals has been challenging due to difficulties in quantifying intragrain behavior. In this study, the local current intensity within state-of-the-art perovskite films mapped by conductive atomic force microscopy reveals a distinct heterogeneity, which exhibits a strong anticorrelation to the external biases. Particularly under different external bias polarities, specific regions in the current mapping show contrasting conductivity. Moreover, grains oriented differently exhibit varied surface potentials and currents, leading us to associate this local current heterogeneity with the grain orientation. It was found that the films treated with isopropanol exhibit ordered grain orientation, demonstrating minimized lattice heterogeneity, fewer microstructure defects, and reduced electronic disorder. Importantly, devices exhibiting an ordered orientation showcase elevated macroscopic optoelectronic properties and boosted device performance. These observations underscore the critical importance of fine-tuning the grain homogenization of perovskite films, offering a promising avenue for further enhancing the efficiency of PSCs.

Reductive Sn2+ Compensator for Efficient and Stable Sn-Pb Mixed Perovskite Solar Cells.

Tin-lead (Sn-Pb) mixed perovskite with a narrow bandgap is an ideal candidate for single-junction solar cells approaching the Shockley-Queisser limit. However, due to the easy oxidation of Sn2+, the efficiency and stability of Sn-Pb mixed perovskite solar cells (PSCs) still lag far behind that of Pb-based solar cells. Herein, highly efficient and stable FA0.5MA0.5Pb0.5Sn0.5I0.47Br0.03 compositional PSCs are achieved by introducing an appropriate amount of multifunctional Tin (II) oxalate (SnC2O4). SnC2O4 with compensative Sn2+ and reductive oxalate group C2O4 2- effectively passivates the cation and anion defects simultaneously, thereby leading to more n-type perovskite films. Benefitting from the energy level alignment and the suppression of bulk nonradiative recombination, the Sn-Pb mixed perovskite solar cell treated with SnC2O4 achieves a power conversion efficiency of 21.43%. More importantly, chemically reductive C2O4 2- effectively suppresses the notorious oxidation of Sn2+, leading to significant enhancement in stability. Particularly, it dramatically improves light stability.

Transcriptome and proteomics conjoint analysis reveal anti-alcoholic liver injury effect of Dianhong Black Tea volatile substances.

Dianhong Black Tea, a fermented tea containing various bioactive ingredients, has been found to have a significant role in alleviating alcoholic liver injury (ALI). One of its main unique components, Dianhong Black Tea volatile substances (DBTVS), may have potential anti-ALI effects. However, its effects and underlying molecular mechanisms are still unknown. In this study, we aimed to investigate the potential of DBTVS as an anti-ALI agent using alcohol-fed rats. We assessed the effect of DBTVS on ALI by analyzing serum transaminase and lipid levels, as well as conducting hematoxylin-eosin and oil red O staining. Additionally, GC-MS was used to detect the components of DBTVS, while transcriptome, proteomics analysis, Western blot, and molecular docking were employed to uncover the underlying mechanisms. Our results demonstrated that DBTVS significantly reduced serum ALT and AST levels and improved lipid metabolism disorders. Moreover, we identified 14 components in DBTVS, with five of them exhibiting strong binding affinity with key proteins. These findings suggested that DBTVS could be a promising agent for the prevention and treatment of ALI. Its potential therapeutic effects may be attributed to its ability to regulate lipid metabolism through the PPAR signaling pathway.

Realizing anti-self-discharged lithium-sulfur batteries by using hierarchical porous carbon nanofibers embedded with Fe/Ni-N catalytic sites.

Lithium-sulfur (Li-S) batteries are featured with high gravimetric energy density, yet their commercial application is significantly deteriorated with the severe self-discharging resulted from the polysulfides shuttle and sluggish electrochemical kinetics. Here, a hierarchical porous carbon nanofibers implanted with Fe/Ni-N (denoted as Fe-Ni-HPCNF) catalytic sites are prepared and used as a kinetics booster toward anti-self-discharged Li-S batteries. In this design, the Fe-Ni-HPCNF possesses interconnected porous skeleton and abundant exposed active sites, enabling fast Li-ion conduction, excellent shuttle inhibition and catalytic ability for polysulfides' conversion. Combined with these advantages, this cell with the Fe-Ni-HPCNF equipped separator exhibits an ultralow self-discharged rate of 4.9% after resting for one week. Moreover, the modified batteries deliver a superior rate performance (783.3 mAh g-1 at 4.0 C) and an outstanding cycling life (over 700 cycles with 0.057% attenuation rate at 1.0 C). This work may guide the advanced design of anti-self-discharged Li-S batteries.