Ester-functionalized pillar[6]arene as the gas chromatographic stationary phase with high-resolution performance towards the challenging isomers of xylenes, diethylbenzenes, and ethyltoluenes.

This work presents the first example of the utilization of polar ester group functionalized pillar[6]arene (P6A-C10-OAc) as a stationary phase for capillary gas chromatographic (GC) separations. The statically coated P6A-C10-OAc column showed a high column efficiency of 5393 plates/m and moderate polar nature. Its resolving capability and retention behaviors were investigated for a mixture of 20 analytes and more than a dozen isomers from apolar to polar in nature. As evidenced, the P6A-C10-OAc column achieved high-resolution separations of all the analytes and good inertness. Importantly, it exhibited distinctly advantageous performance for high resolution of the challenging isomers of xylenes, diethylbenzenes, ethyltoluenes, and halobenzenes over the commercial HP-5 (5% phenyl dimethyl polysiloxane), HP-35 (25% phenyl dimethyl polysiloxane), and PEG-20M (polyethylene glycol) columns.

Climatic conditions and concentrations of BTEX compounds in atmospheric media.

Climatic and meteorological conditions are among the factors affecting the ambient concentrations of BTEX compounds. This systematic review and meta-analysis aimed to interrogate the seasonal effect of climatic conditions on the concentrations of BTEX compounds. Three electronic bibliographic databases including Scopus, PubMed, and Web of Science were systematically searched up to November 14, 2023. The search algorithm followed PRISMA guidance and consisted of three groupings of keywords and their possible combinations. For various climatic conditions, the overall mean and 95% confidence interval (CI) of effect size related to BTEX concentrations were calculated using a random-effect model. In total, 104 articles were included for evaluation in this review. BTEX ambient concentration was higher in winter (ranging from 36 out of 79 relevant studies for xylene to 52 out of 97 relevant studies for benzene) followed by summer and autumn. For humidity conditions, the highest exposure values for BTEX were detected for rainy weather (ranging from 3 out of 5 relevant studies for toluene and xylene to 4 out of 5 relevant studies for benzene and ethyl benzene) compared to dry conditions. The pooled concentration (µg/m3) of benzene, toluene, ethyl benzene, and xylene were computed as 2.61, 7.12, 2.21, and 3.61 in spring, 2.13, 7.53, 1.61, and 2.75 in summer, 3.04, 9.59, 3.14, and 5.50 in autumn, and 3.56, 8.71, 2.35, and 3.91 in winter, respectively. Moreover, the pooled concentrations (µg/m3) of BTEX were measured as 2.98, 7.22, 1.90, and 3.03 in dry weather and 3.15, 6.30, 2.14, and 3.86 in rainy or wet weather, respectively. In most seasons, the ambient concentrations of BTEX were higher in countries with low and middle incomes and in Middle Eastern countries and East/Southeast Asia compared to those in other regions (P < 0.001). The increasing concentrations of BTEX in winter and autumn followed by the summer season and during rainy/wet weather appear to be reasonably consistent despite variations in study methods, quality, or geography. Therefore, it is recommended that more serious control measures are considered for decreasing exposure to BTEX in these climatic conditions.

Zeolite-like performance for xylene isomer purification using polymer-derived carbon membranes.

Polymers of intrinsic microporosity (PIMs) have been used as precursors for the fabrication of porous carbon molecular sieve (CMS) membranes. PIM-1, a prototypical PIM material, uses a fused-ring structure to increase chain rigidity between spirobisindane repeat units. These two factors inhibit effective chain packing, thus resulting in high free volume within the membrane. However, a decrease of pore size and porosity was observed after pyrolytic conversion of PIM-1 to CMS membranes, attributed to the destruction of the spirocenter, which results in the "flattening" of the polymer backbone and graphite-like stacking of carbonaceous strands. Here, a spirobifluorene-based polymer of intrinsic microporosity (PIM-SBF) was synthesized and used to fabricate CMS membranes that showed significant increases in p-xylene permeability (approximately four times), with little loss in p-xylene/o-xylene selectivity (13.4 versus 14.7) for equimolar xylene vapor separations when compared to PIM-1-derived CMS membranes. This work suggests that it is feasible to fabricate such highly microporous CMS membranes with performances that exceed current state-of-the-art zeolites at high xylene loadings.

Impact of xylene exposure during organogenesis on foeto-placental efficiency and foetal viability: Exploring its association with oxidative stress-induced inflammation and apoptosis in utero.

The potential maternal and foetal toxicity resulting from exposure to xylene at or below the allowable limit of 100 ppm during gestation is not thoroughly studied. The aim of this study was to investigate maternal and foetal outcomes following prenatal exposure to xylene during organogenesis. Pregnant Sprague Dawley (SD) rats were administered intraperitoneal (IP) corn oil (vehicle), 100, 500, and 1000 parts per million (ppm) of xylene from gestational day (GD) 6 until GD17. Clinical signs, maternal weight gain, and food consumption were recorded daily. A caesarean hysterectomy was performed on GD21 to assess the reproductive and foetal outcomes. Exposure to 1000 ppm of xylene caused a significant decrease in the maternal body weight and food consumption, and an increase in intrauterine foetal deaths. Foetal assessment revealed a significant decrease in foetal weight in both male and female foetuses of female rats treated with 500 and 1000 ppm. Male placental weight was significantly decreased in all xylene-treated groups, while 1000 ppm xylene significantly decreased female placental weight. Histologically, marked uterine inflammatory lesions, fibrosis of the liver and renal tissues, as well as increased placental glycogen content were observed. Immunohistochemistry revealed a significant increase in lipid peroxidation and apoptotic markers. Thus, the foeto-maternal toxicities of xylene have been shown to be mediated by a systemic inflammatory response that exacerbates intrauterine oxidative stress and impairs foeto-placental transfer, leading to an increase in foetal mortality.

Health risk assessment of exposure to benzene, toluene, ethyl benzene, and xylene in shoe industry-related workplaces.

Benzene, toluene, ethyl benzene, and xylene (BTEX) are prevalent pollutants in shoe industry-related workplaces. The aim of this study was to assess exposure to BTEX and their carcinogenic and non-carcinogenic risks in shoe-industry-related workplaces. This study was carried out at different shoe manufactures, small shoe workshop units, shoe markets, and shoe stores in Tabriz, Iran in 2021. Personal inhalation exposure to BTEX was measured using the National Institute for Occupational Safety and Health (NIOSH) 1501 method. Carcinogenic and non-carcinogenic risks due to inhalation exposure to BTEX were estimated by United States Environmental Protection Agency (U.S. EPA) method based on Mont Carlo simulation. Results showed that the concentrations of benzene and toluene were higher than the threshold limit value (TLV) in both gluing and non-gluing units of shoe manufactures. The total carcinogenic risk (TCR) due to exposure to benzene and ethyl benzene was considerable in all shoe industry-related workplaces. Also, the hazard index (HI) as a non-carcinogenic index was higher than standard levels in all shoe industry-related workplaces. Therefore, shoe industry-related workers are at cancer and non-cancer risks due to exposure to BTEX. Prevention measures need to be implemented to reduce the concentration of BTEX in shoe industry-related workplaces.

Development of a Smartwatch with Gas and Environmental Sensors for Air Quality Monitoring.

In recent years, there has been a growing interest in developing portable and personal devices for measuring air quality and surrounding pollutants, partly due to the need for ventilation in the aftermath of COVID-19 situation. Moreover, the monitoring of hazardous chemical agents is a focus for ensuring compliance with safety standards and is an indispensable component in safeguarding human welfare. Air quality measurement is conducted by public institutions with high precision but costly equipment, which requires constant calibration and maintenance by highly qualified personnel for its proper operation. Such devices, used as reference stations, have a low spatial resolution since, due to their high cost, they are usually located in a few fixed places in the city or region to be studied. However, they also have a low temporal resolution, providing few samples per hour. To overcome these drawbacks and to provide people with personalized and up-to-date air quality information, a personal device (smartwatch) based on MEMS gas sensors has been developed. The methodology followed to validate the performance of the prototype was as follows: firstly, the detection capability was tested by measuring carbon dioxide and methane at different concentrations, resulting in low detection limits; secondly, several experiments were performed to test the discrimination capability against gases such as toluene, xylene, and ethylbenzene. principal component analysis of the data showed good separation and discrimination between the gases measured.

Enhancement of Gaseous o-Xylene Elimination by Chlorosulfonic Acid-Modified H-Zeolite Socony Mobil-5.

It is important to develop effective strategies for enhancing the removal capacity of aromatic volatile organic compounds (VOCs) by modifying conventional porous adsorbents. In this study, a novel HZSM-5 zeolite-supported sulfonic acid (ZSM-OSO3H) was prepared through ClSO3H modification in dichloromethane and employed for the elimination of gaseous o-xylene. The ClSO3H modification enables the bonding of -OSO3H groups onto the HZSM-5 support, achieving a loading of 8.25 mmol·g-1 and leading to a degradation in both crystallinity and textural structure. Within an active temperature range of 110-145 °C, ZSM-OSO3H can efficiently remove o-xylene through a novel reactive adsorption mechanism, exhibiting a removal rate exceeding 98% and reaching a maximum breakthrough adsorption capacity of 264.7 mg. The adsorbed o-xylene derivative is identified as 3,4-dimethylbenzenesulfonic acid. ZSM-OSO3H demonstrates superior adsorption performance for o-xylene along with excellent recyclability. These findings suggest that ClSO3H sulfonation offers a promising approach for modifying various types of zeolites to enhance both the elimination and resource conversion of aromatic VOCs.

The impact of ozone treatment on the removal effectiveness of various refractory compounds in wastewater from petroleum refineries.

Large volumes of wastewater are generated during petroleum refining processes. Petroleum refinery wastewater (PRW) can contain highly toxic compounds that can harm the environment. These toxic compounds can be a challenge in biological treatment technologies due to the effects of these compounds on microorganisms. These challenges can be overcome by using ozone (O3) as a standalone or as a pretreatment to the biological treatment. Ozone was used in this study to degrade the organic pollutants in the heavily contaminated PRW from a refinery in Mpumalanga province of South Africa. The objective was achieved by treating the raw PRW using ozone at different ozone treatment times (15, 30, 45, and 60 min) at a fixed ozone concentration of 3.53 mg/dm3. The ozone treatment was carried out in a 2-liter custom-designed plexiglass cylindrical reactor. Ozone was generated from an Eco-Lab-24 corona discharge ozone generator using clean, dry air from the Afrox air cylinder as feed. The chemical oxygen demand, gas chromatograph characterization, and pH analysis were performed on the pretreated and post-treated PRW samples to ascertain the impact of the ozone treatment. The ozone treatment was effective in reducing the benzene, toluene, ethylbenzene, and xylenes (BTEX) compounds in the PRW. The 60-min ozone treatment of different BTEX pollutants in the PRW resulted in the following percentage reduction: benzene 95%, toluene 77%, m + p-xylene 70%, ethylbenzene 69%, and o-xylene 65%. This study has shown the success of using ozone in reducing the toxic BTEX compounds in a heavily contaminated PRW.

One Collision-Two Substituents: Gas-Phase Preparation of Xylenes under Single-Collision Conditions.

The fundamental reaction pathways to the simplest dialkylsubstituted aromatics-xylenes (C6 H4 (CH3 )2 )-in high-temperature combustion flames and in low-temperature extraterrestrial environments are still unknown, but critical to understand the chemistry and molecular mass growth processes in these extreme environments. Exploiting crossed molecular beam experiments augmented by state-of-the-art electronic structure and statistical calculations, this study uncovers a previously elusive, facile gas-phase synthesis of xylenes through an isomer-selective reaction of 1-propynyl (methylethynyl, CH3 CC) with 2-methyl-1,3-butadiene (isoprene, C5 H8 ). The reaction dynamics are driven by a barrierless addition of the radical to the diene moiety of 2-methyl-1,3-butadiene followed by extensive isomerization (hydrogen shifts, cyclization) prior to unimolecular decomposition accompanied by aromatization via atomic hydrogen loss. This overall exoergic reaction affords a preparation of xylenes not only in high-temperature environments such as in combustion flames and around circumstellar envelopes of carbon-rich Asymptotic Giant Branch (AGB) stars, but also in low-temperature cold molecular clouds (10 K) and in hydrocarbon-rich atmospheres of planets and their moons such as Triton and Titan. Our study established a hitherto unknown gas-phase route to xylenes and potentially more complex, disubstituted benzenes via a single collision event highlighting the significance of an alkyl-substituted ethynyl-mediated preparation of aromatic molecules in our Universe.

Highly Efficient Separation of Intermediate-Size m-Xylene from Xylenes via a Length-Matched Metal-Organic Framework with Optimal Oxygen Sites Distribution.

Xylene separation is crucial but challenging, especially for the preferential separation of the intermediate-size m-xylene from xylene mixtures. Herein, exploiting the differences in molecular length and alkyl distribution among xylenes, we present a length-matched metal-organic framework, formulated as Al(OH)[O2C-C4H2O-CO2], featuring an effective pore size corresponding to m-xylene molecular length combined with multiple negative O hydrogen bond donors distribution, can serve as a molecular trap for efficient preferential separation of the intermediate-size m-xylene. Benchmark separation performance was achieved for separating m-xylene from a ternary mixture of m-xylene/o-xylene/p-xylene, with simultaneous record-high m-xylene uptake (1.3 mmol g-1) and m-xylene/p-xylene selectivity (5.3) in the liquid-phase competitive adsorption. Both vapor- and liquid-phase fixed-bed tests confirmed its practical separation capability with benchmark dynamic m-xylene/p-xylene and m-xylene/o-xylene selectivities, as well as excellent regenerability. The selective and strong m-xylene binding affinity among xylene molecules was further elucidated by simulations, validating the effectiveness of such a pore environment for the separation of intermediate-size molecules.

Confinement of p-Xylene in the Pores of a Bilanthanide Metal-Organic Framework for Highly Selective Recognition.

The rapid and accurate sensing of p-xylene, an essential raw material with a multi-billion-dollar market, in xylene mixture is of great significance in industry; however, the highly similar molecular structures, energy levels, and spectral characteristics of xylene isomers make the selective recognition extremely challenging. Metal-organic frameworks (MOFs) exhibiting tailorable pores and potential binding sites provide prospects for xylene sensing but a comprehensive understanding of the pore effect is still elusive, primarily due to the intricacies involved in the sensing process. Herein, we reported a robust bilanthanide MOF NKU-999-EuTb with precisely engineered pores to accommodate p-xylene, of which the binding sites were confirmed by single crystal X-ray diffraction and dynamic magnetic susceptibilities. NKU-999-EuTb exhibits high-performance in selective recognition for p-xylene towards its isomers. Through a systematical study, it was revealed that absorbing p-xylene into the pores governs the sensing performance. This work provides insights for developing advanced sensing materials for complex isomers.

Combined Omics Approach Reveals Key Differences between Aerobic and Microaerobic Xylene-Degrading Enrichment Bacterial Communities: Rhodoferax─A Hitherto Unknown Player Emerges from the Microbial Dark Matter.

Among monoaromatic hydrocarbons, xylenes, especially the ortho and para isomers, are the least biodegradable compounds in oxygen-limited subsurface environments. Although much knowledge has been gained regarding the anaerobic degradation of xylene isomers in the past 2 decades, the diversity of those bacteria which are able to degrade them under microaerobic conditions is still unknown. To overcome this limitation, aerobic and microaerobic xylene-degrading enrichment cultures were established using groundwater taken from a xylene-contaminated site, and the associated bacterial communities were investigated using a polyphasic approach. Our results show that the xylene-degrading bacterial communities were distinctly different between aerobic and microaerobic enrichment conditions. Although members of the genus Pseudomonas were the most dominant in both types of enrichments, the Rhodoferax and Azovibrio lineages were only abundant under microaerobic conditions, while Sphingobium entirely replaced them under aerobic conditions. Analysis of a metagenome-assembled genome of a Rhodoferax-related bacterium revealed aromatic hydrocarbon-degrading ability by identifying two catechol 2,3-dioxygenases in the genome. Moreover, phylogenetic analysis indicated that both enzymes belonged to a newly defined subfamily of type I.2 extradiol dioxygenases (EDOs). Aerobic and microaerobic xylene-degradation experiments were conducted on strains Sphingobium sp. AS12 and Pseudomonas sp. MAP12, isolated from the aerobic and microaerobic enrichments, respectively. The obtained results, together with the whole-genome sequence data of the strains, confirmed the observation that members of the genus Sphingobium are excellent aromatic hydrocarbon degraders but effective only under clear aerobic conditions. Overall, it was concluded that the observed differences between the bacterial communities of aerobic and microaerobic xylene-degrading enrichments were driven primarily by (i) the method of aromatic ring activation (monooxygenation vs dioxygenation), (ii) the type of EDO enzymes, and (iii) the ability of degraders to respire utilizing nitrate.

MALDI Mass Spectrometry Imaging and Semi-Quantification of Topically Delivered Lactic Acid.

BACKGROUND: Lactic acid is a common active ingredient in many topical skincare products; however, measuring its delivery into the skin is challenging due to the presence of a large level of endogenous lactic acid. In this study, matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI-MSI) was used to quantitatively and qualitatively measure the delivery of lactic acid into the skin from a range of topical skincare products. MATERIALS AND METHODS: Porcine skin samples were treated with various skincare products containing lactic acid. After 24 h, skin samples were sectioned and treated via H&E staining or prepared for MALDI-MSI using chemical derivatization. Samples were then analyzed by MALDI-MSI imaging to obtain lactic acid distribution in the entire skin section. RESULTS: Due to the high level of endogenous lactic acid in the skin, a "triple isotope" of lactic acid (L-Lactic acid-13 C3 ), was needed to provide full resolution from the skin's background signal with MALDI-MSI. With this approach, the topically delivered lactic acid could be quantitatively and qualitatively analyzed from a variety of skincare products. CONCLUSIONS: The combination of L-Lactic acid-13 C3 and MALDI-MSI was successfully used to quantitatively and qualitatively measure the topical delivery of lactic acid from a variety of skincare products. This approach could be used in future work to better understand the mode of action of lactic acid as an active ingredient in skincare products.

Chia (Salvia hispanica L.) can directly suppress basic ovarian cell functions in two farm animal species and protect ovarian cells from the proliferation-stimulating influence of xylene.

The influence of the functional food plant chia (Salvia hispanica L.) on reproduction functions and its ability to prevent the negative effects of environmental contaminants has not yet been studied. Our study aimed to examine the effect of chia seed extract alone and in combination with xylene on the markers of proliferation, apoptosis and hormones release by cultured bovine and porcine ovarian granulosa cells. The extract of chia reduced all of the measured parameters in bovine and porcine ovarian cells but had no effect on the proliferation of porcine cells. Xylene, stimulated proliferation and IGF-I release and inhibited the release of progesterone and testosterone but not apoptosis of bovine granulosa cells. It promoted proliferation, apoptosis and progesterone output by porcine cells. Chia mitigated the stimulatory effect of xylene on proliferation but not on other parameters in both species. The present results are the first demonstration of a direct effect of chia on basic ovarian cell functions. They confirmed a direct influence of xylene on these functions and found a similar stimulatory action of xylene on bovine and porcine ovarian cell proliferation. The present observations demonstrated species-specific differences in the characteristics of xylene influences on ovarian cell apoptosis and secretory activity. Finally, the present results indicate that chia can be a natural protector against the proliferation-stimulating effects of xylene on ovarian cells in both species.

A high-performance xylene-free tissue-clearing agent for routine histology: Preliminary histomorphological results.

After the discovery of the hazardous effects of xylene, less toxic substitutes were proposed for routine histology in the last years. However, the introduction of new xylene-free substitutes in histological processes requires a careful evaluation of their performance in terms of morphological and microscopic details to permit a solid diagnosis as well as good quality immunohistochemical and biomolecular analyses. In this study, we analyzed the performance of a new commercially available xylene-free Tissue-Tek® Tissue-Clear® agent in comparison with another routine xylene-free solvent yet available and employed in routine histological process. Serial histological tissue samples (n = 300) were selected and processed with the two clearing agents. Comparison and evaluation were also performed on slides obtained 6 months after paraffin embedding and archive storage. Blinded semiquantitative analysis of technical performance and morphological details, including tissue architecture and nuclear and cytoplasmic details, was performed on Haematoxylin-Eosin stained sections by two technicians and two pathologists, respectively. Evaluation of tissue slides documented a good overall histological performance in slides obtained after processing with the two different clearing agents. Slides obtained with Tissue-Tek® Tissue-Clear® displayed a higher score in some quality parameters, further supporting its use as a valid alternative to the other commercial routine xylene-free solvents.

p-Xylene Oxidation to Terephthalic Acid: New Trends.

Large-scale terephthalic acid production from the oxidation of p-xylene is an especially important process in the polyester industry, as it is mainly used in polyethylene terephthalate (PET) manufacturing, a polymer that is widely used in fibers, films, and plastic products. This review presents and discusses catalytic advances and new trends in terephthalic acid production (since 2014), innovations in terephthalic acid purification processes, and simulations of reactors and reaction mechanisms.

Conversion of Methanol to Para-Xylene over ZSM-5 Zeolites Modified by Zinc and Phosphorus.

In this work, the influence of different phosphorus sources and the modification of zinc and phosphorus on the performance of the conversion of methanol to aromatics (MTA) was investigated. The results showed that the phosphorus source had a significant impact on the selectivity of para-xylene (PX) in xylene and catalyst stability. The introduction of P resulted in the covering of the active acid sites and the narrowing of the pore of the ZSM-5 zeolite, which improved the shape-selectivity for PX in the methanol conversion reaction. Compared with the modifiers of H3PO4 and (NH4)3PO4, the ZSM-5 zeolite modified by (NH4)2HPO4 exhibited better catalyst stability and PX-selectivity due to its larger specific surface area, pore volume and suitable acidity. When the ZSM-5 zeolite was modified by Zn and P, the effect of Zn and P on the selectivity to aromatics and PX in xylene was almost opposite. With the increase in P-loading, the selectivity of PX in xylene gradually increased but at the cost of decreasing the aromatic-selectivity. On the other hand, the loading of Zn introduced Zn-Lewis acid sites to provide aromatization active centers and improved the aromatic-selectivity. However, excessive Zn reduced the selectivity of PX in xylene. The catalyst activity and aromatic-selectivity could be improved to some extent with an appropriate ratio of Zn and P, while maintaining or increasing the para-selectivity of xylene. Compared with 5% P/ZSM-5 catalyst modified with only (NH4)2HPO4, the PX selectivity in xylene over the Zn-P/ZSM-5 catalyst modified with 5% Zn and 1% P improved from 86.6% to 90.1%, and the PX yield increased by 59%.

Performance and Mechanism of Chlorine Dioxide on BTEX Removal in Liquid and Indoor Air.

With the development of the chemical industry, benzene, toluene, ethylbenzene, and xylene (BTEX) have gradually become the major indoor air pollutants. Various gas treatment techniques are widely used to prevent the physical and mental health hazards of BTEX in semi-enclosed spaces. Chlorine dioxide (ClO2) is an alternative to chlorine as a secondary disinfectant with a strong oxidation ability, a wide range of action, and no carcinogenic effects. In addition, ClO2 has a unique permeability which allows it to eliminate volatile contaminants from the source. However, little attention has been paid to the removal of BTEX by ClO2, due to the difficulty of removing BTEX in semi-enclosed areas and the lack of testing methods for the reaction intermediates. Therefore, this study explored the performance of ClO2 advanced oxidation technology on both liquid and gaseous benzene, toluene, o-xylene, and m-xylene. The results showed that ClO2 was efficient in the removal of BTEX. The byproducts were detected by gas chromatography-mass spectrometry (GC-MS) and the reaction mechanism was speculated using the ab initio molecular orbital calculations method. The results demonstrated that ClO2 could remove the BTEX from the water and the air without causing secondary pollution.

Advanced Fractionation of Kraft Lignin by Aqueous Hydrotropic Solutions.

Lignin is an underutilized high-potential biopolymer that has been extensively studied over the past few decades. However, lignin still has drawbacks when compared with well-known petroleum-based equivalents, and the production of tailored lignin fractions is highly in demand. In this work, a new method for the fractionation of Lignoboost Kraft Lignin (LKL) is proposed by using two different hydrotropes: sodium xylenesulfonate (SXS) and sodium cumenesulfonate (SCS). The different fractions are obtained by sequentially decreasing the hydrotropic concentration with the addition of water. Four and three different fractions were retrieved from the use of SXS and SCS, respectively. The LKL and respective fractions were analysed, and compared by GPC, FTIR-ATR, 1H-NMR, 13C-NMR, 31P NMR, 2D HSQC and SEM. The fractions showed different molecular weights, polydispersity, and amount of functional groups. Our water-based lignin fractionation platform can potentially be combined with different lignin extraction and processing technologies, with the advantage of hydrotrope recycling.

Fluorinated Human Serum Albumin as Potential 19F Magnetic Resonance Imaging Probe.

Fluorinated human serum albumin conjugates were prepared and tested as potential metal-free probes for 19F magnetic resonance imaging (MRI). Each protein molecule was modified by several fluorine-containing compounds via the N-substituted natural acylating reagent homocysteine thiolactone. Albumin conjugates retain the protein's physical and biological properties, such as its 3D dimensional structure, aggregation ability, good solubility, proteolysis efficiency, biocompatibility, and low cytotoxicity. A dual-labeled with cyanine 7 fluorescence dye and fluorine reporter group albumin were synthesized for simultaneous fluorescence imaging and 19F MRI. The preliminary in vitro studies show the prospects of albumin carriers for multimodal imaging.