RESUMEN
The effective detection and release of circulating tumor cells (CTCs) are of great significance for cancer diagnosis and monitoring. The microfluidic technique has proved to be a promising method for CTCs isolation and subsequent analysis. However, complex micro-geometries or nanostructures were often constructed and functionalized to improve the capture efficiency, which limited the scale-up for high-throughput production and larger-scale clinical applications. Thus, we designed a simple conductive nanofiber chip (CNF-Chip)-embedded microfluidic device with a herringbone microchannel to achieve the efficient and specific capture and electrical stimulation-triggered rapid release of CTCs. Here, the most used epithelial cell adhesion molecule (EpCAM) was selected as the representative biomarker, and the EpCAM-positive cancer cells were mainly studied. Under the effects of the nanointerface formed by the nanofibers with a rough surface and the herringbone-based high-throughput microfluidic mixing, the local topographic interaction between target cells and nanofibrous substrate in the microfluidic was synergistically enhanced, and the capture efficiency for CTCs was further improved (more than 85%). After capture, the sensitive and rapid release of CTCs (release efficiency above 97%) could be conveniently achieved through the cleavage of the gold-sulfur bond by applying a low voltage (-1.2 V). The device was successfully used for the effective isolation of CTCs in clinical blood samples from cancer patients, indicating the great potential of this CNF-Chip-embedded microfluidic device in clinical applications.
Asunto(s)
Técnicas Analíticas Microfluídicas , Nanofibras , Células Neoplásicas Circulantes , Humanos , Nanofibras/química , Molécula de Adhesión Celular Epitelial , Microfluídica , Dispositivos Laboratorio en un Chip , Línea Celular TumoralRESUMEN
Electrochemical techniques offer great opportunities for the capture of chemical and biological entities from complex mixtures and their subsequent release into clean buffers for analysis. Such methods are clean, robust, rapid, and compatible with a wide range of biological fluids. Here, we designed an electrochemically addressable system, based on a conducting terpolymer [P(EDOT-co-EDOTSAc-co-EDOTEG)] coated onto a carbon cloth substrate, to selectively capture and release biological entities using a simple electrochemical redox process. The conducting terpolymer composition was optimized and the terpolymer-coated carbon cloth was extensively characterized using electrochemical analysis, Raman and Fourier transform-infrared spectroscopy, water contact angle analysis, and scanning electron microscopy. The conductive terpolymer possesses a derivative of EDOT with an acetylthiomethyl moiety (EDOTSAc), which is converted into a "free" thiol that then undergoes reversible oxidation/reduction cycles at +1.0 V and -0.8 V (vs Ag/AgCl), respectively. That redox process enables electrochemical capture and on-demand release. We first demonstrated the successful electrochemical capture/release of a fluorescently labeled IgG antibody. The same capture/release procedure was then applied to release extracellular vesicles (EVs), originating from both MCF7 and SKBR3 breast cancer cell line bioreactors. EVs were captured using the substrate-conjugated HER2 antibody which was purified from commercially available trastuzumab. Capture and release of breast cancer EVs using a trastuzumab-derived HER2 antibody has not been reported before (to the best of our knowledge). A rapid (2 min) release at a low potential (-0.8 V) achieved a high release efficiency (>70%) of the captured, HER2+ve, SKBR3 EVs. The developed system and the electrochemical method are efficient and straightforward and have vast potential for the isolation and concentration of various biological targets from large volumes of biological and other (e.g., environmental) samples.
RESUMEN
There is a significant and growing research interest in the isolation of extracellular vesicles (EVs) from large volumes of biological samples and their subsequent concentration into clean and small volumes of buffers, especially for applications in medical diagnostics. Materials that are easily incorporated into simple sampling devices and which allow the release of EVs without the need for auxiliary and hence contaminating reagents are particularly in demand. Herein, we report on the design and fabrication of a flexible, microporous, electrochemically switchable cloth that addresses the key challenges in diagnostic applications of EVs. We demonstrate the utility of our electrochemically switchable substrate for the fast, selective, nondestructive, and efficient capture and subsequent release of EVs. The substrate consists of an electrospun cloth, infused with a conducting polymer and decorated with gold particles. Utilizing gold-sulfur covalent bonding, the electrospun substrates may be functionalized with SH-terminated aptamer probes selective to EV surface proteins. We demonstrate that EVs derived from primary human dermal fibroblast (HDFa) and breast cancer (MCF-7) cell lines are selectively captured with low nonspecific adsorption using an aptamer specific to the CD63 protein expressed on the EV membranes. The specific aptamer-EV interactions enable easy removal of the nonspecifically bound material through washing steps. The conducting polymer component of the cloth provides a means for efficient (>92%) and fast (<5 min) electrochemical release of clean and intact captured EVs by cathodic cleavage of the Au-S bond. We demonstrate successful capture of diluted EVs from a large volume sample and their release into a small volume of clean phosphate-buffered saline buffer. The developed cloth can easily be incorporated into different designs for separation systems and would be adaptable to other biological entities including cells and other EVs. Furthermore, the capture/release capability holds great promise for liquid biopsies if used to targeted disease-specific markers.
Asunto(s)
Técnicas Electroquímicas/métodos , Vesículas Extracelulares/química , Aptámeros de Nucleótidos/química , Aptámeros de Nucleótidos/metabolismo , Compuestos Bicíclicos Heterocíclicos con Puentes/química , Línea Celular , Vesículas Extracelulares/metabolismo , Oro/química , Humanos , Células MCF-7 , Polímeros/química , Porosidad , Azufre/química , Tetraspanina 30/metabolismoRESUMEN
Early diagnosis and therapy of cancer metastasis are of great importance for disease outcome. Circulating tumor cells (CTCs) offer the ability for noninvasive tumor profiling in real time. However, simply capturing and counting tumor cells are inadequate to provide valuable information about tumor. Efficiently releasing the captured cells is necessary for the downstream characterization. Herein, we describe a mild electrochemical strategy to effectively isolate CTCs from the bloodstream and rapidly release the captured cells in 2â¯min for downstream molecular characterization, as realized on a conductive poly(aminophenylboronic acid) derivatized electrode. The boronic ester linkage between dopamine (DA) and boronic acids-functionalized electrode is stable, and only upon the application of a weak potential perturbation does the boronic ester dissociate and release cells without compromising cell viability. This platform is reusable after acid treatment and has the potential to be the next-generation platform for cell capture and release, realizing the clinical value of CTCs as biomarkers.
Asunto(s)
Ácidos Borónicos/química , Ésteres/química , Células Neoplásicas Circulantes/patología , Técnicas Biosensibles , Recuento de Células , Línea Celular Tumoral , Separación Celular , Supervivencia Celular , Células Inmovilizadas , Dopamina/química , Técnicas Electroquímicas , Electrodos , Humanos , Oxidación-ReducciónRESUMEN
The effective capture and release of circulating tumor cells (CTCs) is of significant importance in cancer prognose and treatment. Here we report a highly efficient method to capture and release human leukemic lymphoblasts (CCRF-CEM) using aptamers modified gold nanowire arrays (AuNWs). The gold nanowires, showing tunable morphologies from relatively random pillar deposit to relatively uniform arrays, were fabricated by electrochemical deposition using anodic aluminum oxide (AAO) as template. Upon simply being modified with aptamers by Au-S chemistry, the AuNWs exhibit higher specificity to target cells. Also compared to flat gold substrate, the AuNWs with nanostructure can capture target cells with much higher capture yield. Moreover, the captured CCRF-CEM cells can be released from AuNWs efficiently with little damage through an electrochemical desorption process. We predict that our strategy has great potential in providing a simple and economical platform for CTCs isolation, cancer diagnosis, and therapy.
Asunto(s)
Células Neoplásicas Circulantes , Electrodos , Oro , Humanos , Nanoestructuras , NanocablesRESUMEN
The possibility to release drugs from conducting polymers, like polypyrrole or poly(3,4-ethylenedioxythiophene) (PEDOT), has been described and investigated for a variety of different substances during the last years, showing a wide interest in these release systems. A point that has not been looked at so far however is the possibility of other substances, next to the intended ones, leaving the polymer film under the high voltage excursions during redox sweeping. In this study we target this weakness of commonly used detection methods by implementing a high precision analytical method (high-performance liquid chromatography) that allows a separation and subsequently a detailed quantification of all possible release products. We could identify a significantly more complex release behavior for a PEDOT:Dex system than has been assumed so far, revealing the active release of the monomer upon redox activation. The released EDOT could thereby be shown to result from the bulk material, causing a considerable loss of polymer (>10% during six release events) that could partly account for the observed degradation or delamination effects of drug-eluting coatings. The monomer leakage was found to be substantially higher for a PEDOT:Dex film compared to a PEDOT:PSS sample. This finding indicates an overestimation of drug release if side products are mistaken for the actual drug mass. Moreover the full picture of released substances implements the need for further studies to reduce the monomer leakage and identify possible adverse effects, especially in the perspective of releasing an anti-inflammatory substance for attenuation of the foreign body reaction toward implanted electrodes.