RESUMEN
The key of heterostructure is the combinations created by stacking various vdW materials, which can modify interlayer coupling and electronic properties, providing exciting opportunities for designer devices. However, this simple stacking does not create chemical bonds, making it difficult to fundamentally alter the electronic structure. Here, we demonstrate that interlayer interactions in heterostructures can be fundamentally controlled using hydrostatic pressure, providing a bonding method to modify electronic structures. By covering graphene with boron nitride and inducing an irreversible phase transition, the conditions for graphene lattice-matching bonding (IMB) were created. We demonstrate that the increased bandgap of graphene under pressure is well maintained in ambient due to the IMB in the interface. Comparison to theoretical modeling emphasizes the process of pressure-induced interfacial bonding, systematically generalizes, and predicts this model. Our results demonstrate that pressure can irreversibly control interlayer bonding, providing opportunities for high-pressure technology in ambient applications and IMB engineering in heterostructures.
RESUMEN
Leveraging its ultrahigh carrier mobility, zero-bandgap linear dispersion, and extremely short response time, graphene exhibits remarkable potential in ultrafast broad-band photodetection. Nonetheless, the inherently low responsivity of graphene photodetectors, due to the low photogenerated carrier density, significantly impedes the development of practical devices. In this study, we present an improved photoresponse within a graphene-hexagonal boron nitride-graphene vertical tunnel junction device, where the crystallographic orientation of the two graphene electrodes is aligned. Through meticulous device structure design and the adjustment of bias and gate voltages, we observe a 2 orders of magnitude increase in tunneling photocurrent, which is attributed to the momentum-conserving resonant electron tunneling. The enhanced external photoresponsivity is evident across a wide temperature and spectral range and achieves 0.7 A/W for visible light excitation. This characteristic, coupled with the device's negative differential conductance, suggests a novel avenue for highly efficient photodetection and high-frequency, logic-based optoelectronics using van der Waals heterostructures.
RESUMEN
Achieving high-temperature superlubricity is essential for modern extreme tribosystems. Solid lubrication is the sole viable alternative due to the degradation of liquid ones but currently suffers from notable wear, instability, and high friction coefficient. Here, we report robust superlubricity in MoS2/graphene van der Waals heterostructures at high temperatures up to â¼850 K, achieved through localized heating to enable reliable friction testing. The ultralow friction of the MoS2/graphene heterostructure is found to be notably further reduced at elevated temperature and dominantly contributed by the MoS2 edge. The observation can be well described by a multi-contact model, wherein the thermally activated rupture of edge-contacts facilitates the sliding. Our results should be applicable to other van der Waals heterostructures and shed light on their applications for superlubricity at elevated temperature.
RESUMEN
Altermagnets, distinct from conventional ferromagnets or antiferromagnets, have recently attracted attention as the third category of collinear magnets, which exhibit the coexistence of zero net magnetization and spin polarization due to their unique lattice symmetries. Meanwhile, the additional layer degrees of freedom in multilayer sliding ferroelectrics offer opportunities for coupling with lattice symmetries, paving the way for an innovative approach to constructing multiferroic lattices. In this study, altermagnetic tuning in SnS2/MnPSe3/SnS2 heterostructures is achieved by breaking and restoration of lattice inversion symmetry through sliding ferroelectric switching. First-principles calculations reveal that the spin density and corresponding time-reversal symmetry of MnPSe3 can be manipulated by lattice symmetry, triggering phase transitions between antiferromagnetism and altermagnetism. This research establishes a novel form of magnetoelectric coupling mediated by lattice symmetry and provides a theoretical basis for the design of miniature information processing and memory devices based on altermagnetism.
RESUMEN
Control over the optical properties of atomically thin two-dimensional (2D) layers, including those of transition metal dichalcogenides (TMDs), is needed for future optoelectronic applications. Here, the near-field coupling between TMDs and graphene/graphite is used to engineer the exciton line shape and charge state. Fano-like asymmetric spectral features are produced in WS2, MoSe2, and WSe2 van der Waals heterostructures combined with graphene, graphite, or jointly with hexagonal boron nitride (h-BN) as supporting or encapsulating layers. Furthermore, trion emission is suppressed in h-BN encapsulated WSe2/graphene with a neutral exciton red shift (44 meV) and binding energy reduction (30 meV). The response of these systems to electron beam and light probes is well-described in terms of 2D optical conductivities of the involved materials. Beyond fundamental insights into the interaction of TMD excitons with structured environments, this study opens an unexplored avenue toward shaping the spectral profile of narrow optical modes for application in nanophotonic devices.
RESUMEN
The integration of one-selector-one-resistor crossbar arrays requires the selectors featured with high nonlinearity and bipolarity to prevent leakage currents and any crosstalk among distinct cells. However, a selector with sufficient nonlinearity especially in the frame of device miniaturization remains scarce, restricting the advance of high-density storage devices. Herein, a high-performance memory selector is reported by constructing a graphene/hBN/WSe2 heterostructure. Within the temperature range of 300-80 K, the nonlinearity of this selector varies from ≈103 - ≈104 under forward bias, and increases from ≈300 - ≈105 under reverse bias, the highest reported nonlinearity among 2D selectors. This improvement is ascribed to direct tunneling at low bias and Fowler-Nordheim tunneling at high bias. The tunneling current versus voltage curves exhibit excellent bipolarity behavior because of the comparable hole and electron tunneling barriers, and the charge transport polarity can be effectively tuned from N-type or P-type to bipolar by simply changing source-drain bias. In addition, the conceptual memory selector exhibits no sign of deterioration after 70 000 switching cycles, paving the way for assembling 2D selectors into modern memory devices.
RESUMEN
Artificial van der Waals heterostructures, obtained by stacking two-dimensional (2D) materials, represent a novel platform for investigating physicochemical phenomena and applications. Here, the electrochemistry at the one-dimensional (1D) edge of a graphene sheet, sandwiched between two hexagonal boron nitride (hBN) flakes, is reported. When such an hBN/graphene/hBN heterostructure is immersed in a solution, the basal plane of graphene is encapsulated by hBN, and the graphene edge is exclusively available in the solution. This forms an electrochemical nanoelectrode, enabling the investigation of electron transfer using several redox probes, e.g., ferrocene(di)methanol, hexaammineruthenium, methylene blue, dopamine and ferrocyanide. The low capacitance of the van der Waals edge electrode facilitates cyclic voltammetry at very high scan rates (up to 1000 V s-1), allowing voltammetric detection of redox species down to micromolar concentrations with sub-second time resolution. The nanoband nature of the edge electrode allows operation in water without added electrolyte. Finally, two adjacent edge electrodes are realized in a redox-cycling format. All the above-mentioned phenomena can be investigated at the edge, demonstrating that nanoscale electrochemistry is a new application avenue for van der Waals heterostructures. Such an edge electrode will be useful for studying electron transfer mechanisms and the detection of analyte species in ultralow sample volumes.
RESUMEN
The strategic integration of low-dimensional InAs-based materials and emerging van der Waals systems is advancing in various scientific fields, including electronics, optics, and magnetics. With their unique properties, these InAs-based van der Waals materials and devices promise further miniaturization of semiconductor devices in line with Moore's Law. However, progress in this area lags behind other 2D materials like graphene and boron nitride. Challenges include synthesizing pure crystalline phase InAs nanostructures and single-atomic-layer 2D InAs films, both vital for advanced van der Waals heterostructures. Also, diverse surface state effects on InAs-based van der Waals devices complicate their performance evaluation. This review discusses the experimental advances in the van der Waals epitaxy of InAs-based materials and the working principles of InAs-based van der Waals devices. Theoretical achievements in understanding and guiding the design of InAs-based van der Waals systems are highlighted. Focusing on advancing novel selective area growth and remote epitaxy, exploring multi-functional applications, and incorporating deep learning into first-principles calculations are proposed. These initiatives aim to overcome existing bottlenecks and accelerate transformative advancements in integrating InAs and van der Waals heterostructures.
RESUMEN
Two-dimensional (2D) van der Waals heterostructures endow individual 2D material with the novel functional structures, intriguing compositions, and fantastic interfaces, which efficiently provide a feasible route to overcome the intrinsic limitations of single 2D components and embrace the distinct features of different materials. However, the construction of 2D heterostructures with uniform heterointerfaces still poses significant challenges. Herein, a universal in-situ interfacial growth strategy is designed to controllably prepare a series of MXene-based tin selenides/sulfides with 2D van der Waals homogeneous heterostructures. Molten salt etching by-products that are usually recognized as undesirable impurities, are reasonably utilized by us to efficiently transform into different 2D nanostructures via in-situ interfacial growth. The obtained MXene-based 2D heterostructures present sandwiched structures and lamellar interlacing networks with uniform heterointerfaces, which demonstrate the efficient conversion from 3D composite to 2D heterostructures. Such 2D heterostructures significantly enhance charge transfer efficiency, chemical reversibility, and overall structural stability in the electrochemical process. Taking 2D-SnSe2/MXene anode as a representative, it delivers outstanding lithium storage performance with large reversible capacities and ultrahigh capacity retention of over 97% after numerous cycles at 0.2, 1.0, and 10.0 A g-1 current density, which suggests its tremendous application potential in lithium-ion batteries.
RESUMEN
Recent advancements in spin-orbit torque (SOT) technology in two-dimensional van der Waals (2D vdW) materials have not only pushed spintronic devices to their atomic limits but have also unveiled unconventional torques and novel spin-switching mechanisms. The vast diversity of SOT observed in numerous 2D vdW materials necessitates a screening strategy to identify optimal materials for torque device performance. However, such a strategy has yet to be established. To address this critical issue, a combination of density functional theory and non-equilibrium Green's function is employed to calculate the SOT in various 2D vdW bilayer heterostructures. This leads to the discovery of three high SOT systems: WTe2/CrSe2, MoTe2/VS2, and NbSe2/CrSe2. Furthermore, a figure of merit that allows for rapid and efficient estimation of SOT is proposed, enabling high-throughput screening of optimal materials and devices for SOT applications in the future.
RESUMEN
Flexible hydroelectric generators (HEGs) are promising self-powered devices that spontaneously derive electrical power from moisture. However, achieving the desired compatibility between a continuous operating voltage and superior current density remains a significant challenge. Herein, a textile-based van der Waals heterostructure is rationally designed between conductive 1T phase tungsten disulfide@carbonized silk (1T-WS2@CSilk) and carbon black@cotton (CB@Cotton) fabrics with an asymmetric distribution of oxygen-containing functional groups, which enhances the proton concentration gradients toward high-performance wearable HEGs. The vertically staggered 1T-WS2 nanosheet arrays on the CSilk fabric provide abundant hydrophilic nanochannels for rapid carrier transport. Furthermore, the moisture-induced primary battery formed between the active aluminum (Al) electrode and the conductive textiles introduces the desired electric field to facilitate charge separation and compensate for the decreased streaming potential. These devices exhibit a power density of 21.6 µW cm-2, an open-circuit voltage (Voc) of 0.65 V sustained for over 10 000 s, and a current density of 0.17 mA cm-2. This performance makes them capable of supplying power to commercial electronics and human respiratory monitoring. This study presents a promising strategy for the refined design of wearable electronics.
RESUMEN
In-plane anisotropic two-dimensional (2D) materials exhibit in-plane orientation-dependent properties. The anisotropic unit cell causes these materials to show lower symmetry but more diverse physical properties than in-plane isotropic 2D materials. In addition, the artificial stacking of in-plane anisotropic 2D materials can generate new phenomena that cannot be achieved in in-plane isotropic 2D materials. In this perspective we provide an overview of representative in-plane anisotropic 2D materials and their properties, such as black phosphorus, group IV monochalcogenides, group VI transition metal dichalcogenides with 1T' and Tdphases, and rhenium dichalcogenides. In addition, we discuss recent theoretical and experimental investigations of twistronics using in-plane anisotropic 2D materials. Both in-plane anisotropic 2D materials and their twistronics hold considerable potential for advancing the field of 2D materials, particularly in the context of orientation-dependent optoelectronic devices.
RESUMEN
Two-dimensional topological insulators have attracted much interest due to their potential applications in spintronics and quantum computing. To access the exotic physical phenomena, a gate electric field is required to tune the Fermi level into the bulk band gap. Hexagonal boron nitride (h-BN) is a promising alternative gate dielectric due to its unique advantages such as flat and charge-free surface. Here we present a h-BN/graphite van der Waals heterostructure as a top gate on HgTe heterostructure-based Hall bar devices. We compare our results to devices with h-BN/Ti/Au and HfO2/Ti/Au gates. Devices with a h-BN/graphite gate show no charge carrier density shift compared to as-grown structures, in contrast to a significant n-type carrier density increase for HfO2/Ti/Au. We attribute this observation mainly to the comparable work function of HgTe and graphite. In addition, devices with h-BN gate dielectric show slightly higher electron mobility compared to HfO2-based devices. Our results demonstrate the compatibility between layered materials transfer and wet-etched structures and provide a strategy to solve the issue of significant shifts of the carrier density in gated HgTe heterostructures.
RESUMEN
The field-effect transistor (FET) is a fundamental component of semiconductors and the electronic industry. High on-current and mobility with layer-dependent features are required for outstanding FET channel material. Two-dimensional materials are advantageous over bulk materials owing to their higher mobility, high ON/OFF ratio, low tunneling current, and leakage problems. Moreover, two-dimensional heterostructures provide a better way to tune electrical properties. In this work, the two distinct possibilities of PdSe2/MoSe2heterostructure have been employed through mechanical exfoliation and analyzed their electrical response. These diffe approaches to heterostructure formation serve as crucial components of our investigation, allowing us to explore and evaluate the unique electronic properties arising from each design. This work demonstrates that the heterostructure possesses a better ON/OFF ratio of â¼5.78 × 105, essential in switching characteristics. Moreover, MoSe2provides a defect-free interface to PdSe2, resulting in a higher ON current of â¼10µA and mobility of â¼63.7 cm2V-1s-1, necessary for transistor applications. In addition, comprehending the process of charge transfer occurring at the interface between transition metal dichalcogenides is fundamental for advancing next-generation technologies. This work provides insights into the interface formed between the PdSe2and MoSe2that can be harnessed in transistor applications.
RESUMEN
With the widespread application of highly integrated electronic devices, the urgent development of multifunctional polymer-based composite materials with high electromagnetic interference shielding effectiveness (EMI SE) and thermal conductivity capabilities is critically essential. Herein, a graphene/carbon felt/polyimide (GCF/PI) composite is prepared through constructing 3D van der Waals heterostructure by heating carbon felt and graphene at high temperature. The GCF-3/PI composite exhibits the highest through-plane thermal conductivity with 1.31 W·m-1·K-1, when the content of carbon felt and graphene is 14.1 and 1.4 wt.%, respectively. The GCF-3/PI composite material achieves a thermal conductivity that surpasses pure PI by 4.9 times. Additionally, GCF-3/PI composite shows an outstanding EMI SE of 69.4 dB compared to 33.1 dB for CF/PI at 12 GHz. The 3D van der Waals heterostructure constructed by carbon felt and graphene sheets is conducive to the formation of continuous networks, providing fast channels for the transmission of phonons and carriers. This study provides a guidance on the impact of 3D van der Waals heterostructures on the thermal and EMI shielding properties of composites.
RESUMEN
We recently synthesized one-dimensional (1D) van der Waals heterostructures in which different atomic layers (e.g., boron nitride or molybdenum disulfide) seamlessly wrap around a single-walled carbon nanotube (SWCNT) and form a coaxial, crystalized heteronanotube. The growth process of 1D heterostructure is unconventional-different crystals need to nucleate on a highly curved surface and extend nanotubes shell by shell-so understanding the formation mechanism is of fundamental research interest. In this work, we perform a follow-up and comprehensive study on the structural details and formation mechanism of chemical vapor deposition (CVD)-synthesized 1D heterostructures. Edge structures, nucleation sites, and crystal epitaxial relationships are clearly revealed using transmission electron microscopy (TEM). This is achieved by the direct synthesis of heteronanotubes on a CVD-compatible Si/SiO2 TEM grid, which enabled a transfer-free and nondestructive access to many intrinsic structural details. In particular, we have distinguished different-shaped boron nitride nanotube (BNNT) edges, which are confirmed by electron diffraction at the same location to be strictly associated with its own chiral angle and polarity. We also demonstrate the importance of surface cleanness and isolation for the formation of perfect 1D heterostructures. Furthermore, we elucidate the handedness correlation between the SWCNT template and BNNT crystals. This work not only provides an in-depth understanding of this 1D heterostructure material group but also, in a more general perspective, serves as an interesting investigation on crystal growth on highly curved (radius of a couple of nanometers) atomic substrates.
RESUMEN
The resonant tunneling diode (RTD) is one of the very few room-temperature-operating quantum devices to date that is able to exhibit negative differential resistance. However, the reported key figure of merit, the current peak-to-valley ratio (PVR), of graphene RTDs has been up to only 3.9 at room temperature thus far. This remains very puzzling, given the atomically flat interfaces of the 2D materials. By varying the active area and perimeter of RTDs based on a graphene/hexagonal boron nitride/graphene heterostructure, we discovered that the edge doping can play a dominant role in determining the resonant tunneling, and a large area-to-perimeter ratio is necessary to obtain a high PVR. The understanding enables establishing a novel design rule and results in a PVR of 14.9, which is at least a factor of 3.8 higher than previously reported graphene RTDs. Furthermore, a theory is developed allowing extraction of the edge doping depth for the first time.
RESUMEN
Transition metal dichalcogenide heterostructures provide a versatile platform to explore electronic and excitonic phases. As the excitation density exceeds the critical Mott density, interlayer excitons are ionized into an electron-hole plasma phase. The transport of the highly non-equilibrium plasma is relevant for high-power optoelectronic devices but has not been carefully investigated previously. Here, we employ spatially resolved pump-probe microscopy to investigate the spatial-temporal dynamics of interlayer excitons and hot-plasma phase in a MoSe2/WSe2 twisted bilayer. At the excitation density of â¼1014 cm-2, well exceeding the Mott density, we find a surprisingly rapid initial expansion of hot plasma to a few microns away from the excitation source within â¼0.2 ps. Microscopic theory reveals that this rapid expansion is mainly driven by Fermi pressure and Coulomb repulsion, while the hot carrier effect has only a minor effect in the plasma phase.
RESUMEN
Energy transfer processes may be engineered in van der Waals heterostructures by taking advantage of the atomically abrupt, Å-scale, and topologically tailorable interfaces within them. Here, we prepare heterostructures comprised of 2D WSe2 monolayers interfaced with dibenzotetraphenylperiflanthene (DBP)-doped rubrene, an organic semiconductor capable of triplet fusion. We fabricate these heterostructures entirely through vapor deposition methods. Time-resolved and steady-state photoluminescence measurements reveal rapid subnanosecond quenching of WSe2 emission by rubrene and fluorescence from guest DBP molecules at 612 nm (λexc = 730 nm), thus providing clear evidence of photon upconversion. The dependence of the upconversion emission on excitation intensity is consistent with a triplet fusion mechanism, and maximum efficiency (linear regime) of this process occurs at threshold intensities as low as 110 mW/cm2, which is comparable to the integrated solar irradiance. This study highlights the potential for advanced optoelectronic applications employing vdWHs which leverage strongly bound excitons in monolayer TMDs and organic semiconductors.
RESUMEN
In superlattices of twisted semiconductor monolayers, tunable moiré potentials emerge, trapping excitons into periodic arrays. In particular, spatially separated interlayer excitons are subject to a deep potential landscape and they exhibit a permanent dipole providing a unique opportunity to study interacting bosonic lattices. Recent experiments have demonstrated density-dependent transport properties of moiré excitons, which could play a key role for technological applications. However, the intriguing interplay between exciton-exciton interactions and moiré trapping has not been well understood yet. In this work, we develop a microscopic theory of interacting excitons in external potentials allowing us to tackle this highly challenging problem. We find that interactions between moiré excitons lead to a delocalization at intermediate densities, and we show how this transition can be tuned via twist angle and temperature. The delocalization is accompanied by a modification of optical moiré resonances, which gradually merge into a single free exciton peak.