Iron oxide nanoparticles derived from Polyalthia korintii (Dunal) Benth. & Hook. F leaves extract exhibits biological and dye degradation potentials.

Green synthesis of iron oxide nanoparticles using plant extracts is of tremendous interest owing to its cost effectiveness, ecofriendly and high efficiency compared to physical and chemical approaches. In the current study, we describe a green approach for producing iron oxide nanoparticles utilizing Polyalthia korintii aqueous leaf extract (PINPs). The prepared PINPs were assessed of their biological and dye degradation potentials. The physico-chemical characterization of PINPs using UV-Visible spectrophotometer, Fourier Transform Infrared Spectroscopy, X-Ray Diffraction studies, Field emission Scanning Electron Microscopy and Energy Dispersive X-ray spectroscopy analysis confirmed the synthesized sample comprised of iron oxide entity, predominantly spherical with the size range of 40-60 nm. Total Phenolic Content of PINPs is 59.36 ± 1.64 µg GAE/mg. The PINPs exhibited 89.78 ± 0.07% DPPH free radical scavenging and 28.7 ± 0.21% ABTS cation scavenging activities. The antibacterial activities were tested against different gram-positive and gram-negative bacteria and PINPs were more effective against Enterococcus faecalis and Klebsiella pneumoniae. Cytotoxicity of PINPs against K562 and HCT116 were measured and IC50 values were found to be 84.99 ± 4.3 µg/ml and 79.70 ± 6.2 µg/ml for 48 h respectively. The selective toxicity of PINPs was demonstrated by their lowest activity on lymphocytes, HEK293 cells, and erythrocytes. The toxicity (LC 50 values) against first, second, third and fourth instar larvae of Culex quinquefasciatus was 40 ± 1.5 mg/mL, 45 ± 0.8 mg/mL, 99 ± 2.1 mg/mL and 120 ± 3.5 mg/mL respectively. Finally, PINPs were utilized to as a catalyst for removal of textile dyes like Methylene blue and methyl orange in a fenton-like reaction. The results showed 100% dye degradation efficiency in a fenton like reaction within 35 min. Thus, the green synthesized PINPs exhibit antioxidant, antibacterial, antiproliferative, larvicidal and dye degradation potentials, indicating their suitability for biological and environmental applications.

Bacterial nanocellulose-clay film as an eco-friendly sorbent for superior pollutants removal from aqueous solutions.

The persistent water treatment and separation challenge necessitates innovative and sustainable advances to tackle conventional and emerging contaminants in the aquatic environment effectively. Therefore, a unique three-dimensional (3D) network composite film (BNC-KC) comprised of bacterial nanocellulose (BNC) incorporated nano-kaolinite clay particles (KC) was successfully synthesized via an in-situ approach. The microscopic characterization of BNC-KC revealed an effective integration of KC within the 3D matrix of BNC. The investigated mechanical properties of BNC-KC demonstrated a better performance compared to BNC. Thereafter, the sorption performance of BNC-KC films towards basic blue 9 dye (Bb9) and norfloxacin (NFX) antibiotic from water was investigated. The maximum sorption capacities of BNC-KC for Bb9 and NFX were 127.64 and 101.68 mg/g, respectively. Mechanistic studies showed that electrostatic interactions, multi-layered sorption, and 3D structure are pivotal in the NFX/Bb9 sorption process. The intricate architecture of BNC-KC effectively traps molecules within the interlayer spaces, significantly increasing sorption efficiency. The distinctive structural configuration of BNC-KC films effectively addressed the challenges of post-water treatment separation while concurrently mitigating waste generation. The environmental evaluation, engineering, and economic feasibility of BNC-KC are also discussed. The cost estimation assessment of BNC-KC revealed the potential to remove NFX and Bb9 from water at an economically viable cost.

Preparation of a New Hexafluorobutanol-Farnesol Based Supramolecular Solvent and Its Application in Microextraction of Sudan Dyes From Beverage and Water Samples.

In this work, a new supramolecular solvent (SUPRAS) was prepared for the first time using hexafluorobutanol (HFB) and farnesol (FO). FO acts as an amphiphile and HFB as a coacervation inducer and density regulator. The method of dispersive liquid-liquid microextraction followed by high-performance liquid chromatography, supported by a vortex technique, was established using the prepared SUPRAS for the determination of Sudan dyes in aqueous samples. The extraction parameters, including FO content, HFB content, vortex time, salt addition, and solution pH, were thoroughly investigated and optimized. Under the optimized conditions, the linearity range is 10-750 ng/mL for Sudan I, and 10-1000 ng/mL for Sudan III and Sudan IV, respectively. The limits of detection for Sudan dyes were in the range of 0.8-3.1 ng/mL. The inter- and intra-day relative standard deviations for Sudan dyes were in the range of 1.3%-4.1% and 0.2%-2.6%, respectively. Finally, the proposed method was applied to the determination of Sudan dyes in beverage and river water samples with recoveries ranging from 93.9% to 122.1%. Compared to conventional techniques for the extraction of Sudan dyes in real samples, the proposed method is simpler, faster, and more environmentally friendly.

Optimization of Extraction Conditions from Gac Fruit and Utilization of Peel-Derived Biochar for Crystal Violet Dye Removal.

Gac fruit (Momordica cochinchinensis Spreng.) is a prominent source of carotenoids, renowned for its exceptional concentration of these compounds. This study focuses on optimizing the extraction of active components from the aril of gac fruit by evaluating the effects of extraction temperature, solid-liquid ratio, and extraction time. The primary objective is to maximize the yield of gac oil while assessing its antioxidant capacity. To analyze the kinetics of the solid-liquid extraction process, both first-order and second-order kinetic models were employed, with the second-order model providing the best fit for the experimental data. In addition, the potential of gac fruit peel as a precursor for biochar production was investigated through carbonization. The resultant biochars were evaluated for their efficacy in adsorbing crystal violet (CV) dye from aqueous solutions. The adsorption efficiency of the biochars was found to be dependent on the carbonization temperature, with the highest efficiency observed for BCMC550 (91.72%), followed by BCM450 (81.35%), BCMC350 (78.35%), and BCMC250 (54.43%). The adsorption isotherm data conformed well to the Langmuir isotherm model, indicating monolayer adsorption behavior. Moreover, the adsorption kinetics were best described by the pseudo-second-order model. These findings underscore the potential of gac fruit and its byproducts for diverse industrial and environmental applications, highlighting the dual benefits of optimizing gac oil extraction and utilizing the peel for effective dye removal.

Production of Tyrian purple indigoid dye from tryptophan in Escherichia coli.

Tyrian purple, mainly composed of 6,6'-dibromoindigo (6BrIG), is an ancient dye extracted from sea snails and was recently demonstrated as a biocompatible semiconductor material. However, its synthesis remains limited due to uncharacterized biosynthetic pathways and the difficulty of regiospecific bromination. Here, we introduce an effective 6BrIG production strategy in Escherichia coli using tryptophan 6-halogenase SttH, tryptophanase TnaA and flavin-containing monooxygenase MaFMO. Since tryptophan halogenases are expressed in highly insoluble forms in E. coli, a flavin reductase (Fre) that regenerates FADH2 for the halogenase reaction was used as an N-terminal soluble tag of SttH. A consecutive two-cell reaction system was designed to overproduce regiospecifically brominated precursors of 6BrIG by spatiotemporal separation of bromination and bromotryptophan degradation. These approaches led to 315.0 mg l-1 6BrIG production from tryptophan and successful synthesis of regiospecifically dihalogenated indigos. Furthermore, it was demonstrated that 6BrIG overproducing cells can be directly used as a bacterial dye.

Spectral Characterization of Purpurin Dye and Its Application in pH Sensing, Cell Imaging and Apoptosis Detection.

Purpurin (1,2,4-trihydroxy-9,10-anthraquinone) is a natural red dye obtained from the red madder plant that is widely used in food and dyeing industries. The present study investigated the characteristics of purpurin and its application as a pH-sensitive probe to detect the pH of solutions and intracellular pH of mammalian and bacterial cells. Purpurin exhibited high pH-sensitive behavior, low analytes interference, high stability with pKa of 4.6 and visible colorimetric change. 1H NMR and FTIR studies indicated protonation of phenolic hydroxyl group under acidic condition with hypsochromic shift in the absorption and fluorescence spectra relative to that of basic condition. Cell culture studies using HeLa cells revealed that purpurin is well tolerated by the cells and the fluorescent imaging result indicated excellent cell permeability with possible use of the dye to detect the pH fluctuations in living cells under various physiological conditions such as apoptosis. Microbiological studies indicated that the dye could be used for visualization of bacteria under acidic condition.

A Study On the Optoelectronic Parameters of Natural Dyes Extracted from Beetroot, Cabbage, Walnut, and Henna for Potential Applications in Organic Electronics.

In this work, the optoelectronic parameters of natural dyes extracted from beetroot, red cabbage, walnut leaves, and henna were comprehensively investigated, namely the optical energy gap (Eg), extinction coefficient (k), refractive index (n), dielectric constant ([Formula: see text], and optical conductivity ([Formula: see text]. Results showed a high refractive index, dielectric constant and optical conductivity ([Formula: see text] and [Formula: see text]) for the dye extracted from red cabbage, while minimum values of [Formula: see text] and [Formula: see text] were obtained for the henna dye. The transition type of the optical absorption of the dyes was found to be a direct allowed transition, which is taken place between the bonding and antibonding molecular energy levels. The reported results herein are essential in revealing the viability of these natural dyes for potential applications in organic electronics, including organic photovoltaics, photodiodes, and sensors.

Supercritical fluid chromatography for the analysis of natural dyes: From carotenoids to flavonoids.

Plant-derived natural dyes are used in a variety of formulated products, from food to cosmetics and pharmaceutics. In addition to their color, they also provide some bioactivity. While they are mostly analyzed with high-performance liquid chromatography, supercritical fluid chromatography was also employed for several dye families, mostly for carotenoids and chlorophylls, and more recently for anthraquinones and flavonoids. These supercritical fluid chromatography methods are described in this review. Because the dyes have different structures and structural variations (polarity, isomers, etc.), the best chromatographic system to achieve their separation is not always the same. Hydrophobic stationary phases are preferred for the most hydrophobic dyes (chlorophylls and carotenoids) while polar stationary phases are preferred for the polar dyes (anthraquinones and flavonoids). Regarding the mobile phase composition, chlorophylls and carotenoids are best eluted with moderate proportions of co-solvent in CO2 (about 40%), while the most polar glycosylated flavonoids require higher proportions of co-solvent and acidic additives. Because dyes are colorful, ultraviolet-visible detection is often sufficient, while mass spectrometry offers additional structural information. Furthermore, fundamental information can also be gained through chromatographic analysis of dyes: either solubility in supercritical fluids, in view of their extraction, or retention behavior providing an understanding of stationary phase properties.

Stable Crystalline Organic-Inorganic Hybrid Indium Phosphate with Dye Removal and Ractopamine Detection Applications.

A highly stable framework of an organic-inorganic hybrid indium phosphate (NTOU-7) was synthesized under hydro(solvo)thermal conditions and structurally characterized by single-crystal X-ray diffraction and solid-state NMR spectroscopy. This is the first example of a post-transition-metal phosphate incorporating tetradentate organic molecules. The In atoms in the inorganic layers are coordinated by imidazole rings of the 1,2,4,5-tetrakis(imidazol-1-ylmethyl)benzene linkers to generate a new solid-state material. NTOU-7 showed high chemical stability and displayed excellent performance for both dye removal and ractopamine (RAC) detection, which are interesting environmental and biosensing applications. The sensitivity and ultralow limit of detection were 607.9 µA·µM·cm-2 and 2.74 × 10-10 mol·L-1 (0.08 ppb), which meet the requirements stated by the Codex Alimentarius Commission (10 ppb RAC residue in beef and pork). The detection performance was confirmed by sensing spiked-in RAC in real pork samples. We also reported the synthesis, characterization, structural stability, dye removal, and sensing properties of NTOU-7.

TiO2 modified orthocortical and paracortical cells having enhanced photocatalytic degradation and photoreduction properties.

In this study, cortical cells resultant from wool fibers were loaded with TiO2 nanoparticles in a hydrothermal process and were then engineered as organic-nonorganic hybrid composite photocatalysts for both photodegradation of organic dyes and photoreduction of heavy metal ions. The microstructure and photocatalytic properties of TiO2 modified cortical cells (i.e. both orthocortical and paracortical cells) were systematically characterized using a series of analytical techniques including FESEM, TEM, element analysis, Mott-Schottky curve, BET specific surface area, Zeta potentials, as well as XRD, FTIR, XPS, DRS, PL, UPS, EDS and ESR spectra. Their photocatalytic performance and trapping experiments of the TiO2 modified cortical cells were measured in the photodegradation of methylene blue (MB) dye and Congo Red (CR) dye as well as the photoreduction of Cr(VI) ions under visible light irradiation. It was found that anatase TiO2 nanoparticles were chemically grafted on the surface of the two cortical cells via O-Ti4+/O-Ti3+ bonds, and that TiO2 nanoparticles were formed inside the orthocortical cells in the hydrothermal process. The TiO2 modified orthocortical and paracortical cells possessed much higher photocatalytic efficiency than the commercially available TiO2 nanoparticle powder, Degussa P25, in the photodegradation of cationic MB dye and photoreduction of Cr(VI) ions, while their photocatalytic efficiency in the photodegradation of anionic CR dye is smaller because of their greater negative Zeta potentials and photogenerated holes as the main reactive radical species. In comparison with the TiO2 modified paracortical cells, the higher photocatalytic efficiency of the TiO2 modified orthocortical cells was demonstrated in the photodegradation of MB dye solution and this might be due to both the S-doped TiO2 nanoparticles infiltrated into the naturally hydrophilic orthocortical cells and the primary reactive radical species of photogenerated holes being trapped in the cells.

Preparation of new hydrophobic deep eutectic solvents and their application in dispersive liquid-liquid microextraction of Sudan dyes from food samples.

In this work, a new generation of hydrophobic deep eutectic solvents (DESs) was prepared using eugenol (as hydrogen bond donor) and benzyltriethylammonium bromide, benzyltributylammonium bromide, benzyltriethylammonium chloride and benzyltributylammonium chloride (as hydrogen bond acceptor) in different molar ratios. These DESs were applied to vortex-assisted dispersive liquid-liquid microextraction of Sudan dyes from food samples, followed by high-performance liquid chromatographic determination. The influencing parameters, including the type of DES, amount of DES, extraction time, solution pH and salt addition, were investigated and optimized. Under the optimized conditions, a linear range of 2-1000 ng mL-1 with determination coefficients of <0.999 was obtained. Limits of detection and limits of quantification were in the range of 0.5 to 1 ng mL-1 and 2 to 3 ng mL-1, respectively. The proposed method was successfully used in the determination of Sudan dyes in chili sauce, chili powder and ketchup, and satisfactory recoveries of between 89.9 and 119.3% were obtained, with relative standard deviations in the range of 0.1-6.8%. The proposed method is simple, green and efficient, and can be applied to determine Sudan dyes in complex matrices.

Copper iodide decorated graphitic carbon nitride sheets with enhanced visible-light response for photocatalytic organic pollutant removal and antibacterial activities.

The photocatalytic process is an environmentally-friendly procedure that has been well known in the destruction of organic pollutants in water. The multiple semiconductor heterojunctions are broadly applied to enhance the photocatalytic performances in comparison to the single semiconductor. Polymeric semiconductors have received much attention as inspiring candidates owing to their adjustable optical absorption features and simply adaptable electronic structure. The shortcomings of the current photocatalytic system, which restricts their technical applications incorporate fast charge recombination, low-utilization of visible radiation, and low immigration capability of the photo-induced electron-hole. This paper indicates the novel fabrication of new CuI/g-C3N4 nanocomposite by hydrothermal and ultrasound-assisted co-precipitation methods. The structure, shape, and purity of the products were affected by different weight percentages and fabrication processes. Electron microscope unveils that CuI nanoparticles are distributed on g-C3N4. The bandgap of pure carbon nitride is estimated at 2.70 eV, and the bandgap of the nanocomposite has increased to 2.8 eV via expanding the amount of CuI. The CuI/C3N4 nanocomposite has a great potential to degrade cationic and anionic dyes in high value because of its appropriate bandgap. It can be a great catalyst for water purification. The photocatalytic efficiency is affected by multiple factors such as types of dyes, fabrication methods, the light sources, mass ratios, and scavengers. The fabricated CuI/C3N4 nanocomposite exposes higher photocatalytic performance than the pure C3N4 and CuI. The photocatalytic efficiency of nanocomposite is enhanced by enhancing the amount of CuI. Besides, the fabricated CuI/C3N4 revealed remarkable reusability without the obvious loss of photocatalytic activity. The antibacterial activity of the specimens reveals that the highest antimicrobial activities are revealed against P. aeruginosa and E. coli. These results prove that the nanocomposite possesses high potential for killing bacteria, and it can be nominated as a suitable agent against bacteria.

CeO2 foam-like nanostructure: biosynthesis and their efficient removal of hazardous dye.

In this study, CeO2 (cerium oxide) nanoparticles were synthesized using Pinus halepensis pollen and were characterized by field emission scanning electron microscopy (FESEM), powder X-ray diffraction (PXRD) and Raman spectroscopy. The results showed that the ensuing CeO2 nanostructures, ranging in size from 5 to 25 nm, had high porosity. Synthesized CeO2 showed the effective catalytic activity towards the photocatalytic removal of dyes. In this work, the photocatalytic activity to removal dye (methyl violet 2B), in the absence of UV radiation, using cerium dioxide nanoparticles (CeO2-NP) was determined. In this research, four main factors such as effect on color, concentration and pH were examined and maximum %R was obtained about was 97% in 75 min in presence of 50 mg of hydrogen peroxide.

Optimization of a Sustainable Protocol for the Extraction of Anthocyanins as Textile Dyes from Plant Materials.

Anthocyanins are the largest group of polyphenolic pigments in the plant kingdom. These non-toxic, water-soluble compounds are responsible for the pink, red, purple, violet, and blue colors of fruits, vegetables, and flowers. Anthocyanins are widely used in the production of food, cosmetic and textile products, in the latter case to replace synthetic dyes with natural and sustainable alternatives. Here, we describe an environmentally benign method for the extraction of anthocyanins from red chicory and their characterization by HPLC-DAD and UPLC-MS. The protocol does not require hazardous solvents or chemicals and relies on a simple and scalable procedure that can be applied to red chicory waste streams for anthocyanin extraction. The extracted anthocyanins were characterized for stability over time and for their textile dyeing properties, achieving good values for washing fastness and, as expected, a pink-to-green color change that is reversible and can therefore be exploited in the fashion industry.

Recent Achievements in Dyes Removal Focused on Advanced Oxidation Processes Integrated with Biological Methods.

In the last 3 years alone, over 10,000 publications have appeared on the topic of dye removal, including over 300 reviews. Thus, the topic is very relevant, although there are few articles on the practical applications on an industrial scale of the results obtained in research laboratories. Therefore, in this review, we focus on advanced oxidation methods integrated with biological methods, widely recognized as highly efficient treatments for recalcitrant wastewater, that have the best chance of industrial application. It is extremely important to know all the phenomena and mechanisms that occur during the process of removing dyestuffs and the products of their degradation from wastewater to prevent their penetration into drinking water sources. Therefore, particular attention is paid to understanding the mechanisms of both chemical and biological degradation of dyes, and the kinetics of these processes, which are important from a design point of view, as well as the performance and implementation of these operations on a larger scale.

Husk of Agarwood Fruit-Based Hydrogel Beads for Adsorption of Cationic and Anionic Dyes in Aqueous Solutions.

Hydrogel beads based on the husk of agarwood fruit (HAF)/sodium alginate (SA), and based on the HAF/chitosan (CS) were developed for the removal of the dyes, crystal violet (CV) and reactive blue 4 (RB4), in aqueous solutions, respectively. The effects of the initial pH (2-10) of the dye solution, the adsorbent dosage (0.5-3.5 g/L), and contact time (0-540 min) were investigated in a batch system. The dynamic adsorption behavior of CV and RB4 can be represented well by the pseudo-second-order model and pseudo-first-order model, respectively. In addition, the adsorption isotherm data can be explained by the Langmuir isotherm model. Both hydrogel beads have acceptable adsorption selectivity and reusability for the study of selective adsorption and regeneration. Based on the effectiveness, selectivity, and reusability of these hydrogel beads, they can be treated as potential adsorbents for the removal of dyes in aqueous solutions.

Colored Corn: An Up-Date on Metabolites Extraction, Health Implication, and Potential Use.

Colored (orange, pink, red, purple, and blue) corn strongly attracted attention on its healthy properties mainly due to its anthocyanin and carotenoid composition which is also responsible for its pigmentation. The present review summarized the recent updates on the extraction and chemical characterization of the main plant secondary metabolites present in colored seeds, kernel, cob, husk, and silk. The main approaches used to stabilize the extracts have been discussed as well as their food and non-food uses. Both in vitro and in vivo (animal models) studies on the different effects (antibacterial, antimutagenic, antioxidant, and anti-inflammatory activities, effects on metabolic syndrome, diabetes, glucose and lipidic metabolism, and neuroprotection) of pigmented extracts on animal and human health have been summarized.

Development of photochemical integrated submerged membrane bioreactor for textile dyeing wastewater treatment.

A pilot-scale photocatalytic membrane bioreactor (PMBR) was developed for the treatment of textile dyeing wastewater. The PMBR is made of mild steel rectangular reactor of photocatalytic unit and polyethersulphone submerged hollow fibre membrane bioreactor unit with the working volume of about 20 L. For easy recovery, the tungsten oxide (WO3) and WO3/1% graphene oxide (GO)-powdered photocatalyst were made into bead and immersed in photocatalytic reactor. Graphene oxide incorporation has shown better results in decolourisation and degradation when compared with WO3 alginate alone. The incorporation of GO into WO3 minimises the recombination of photogenerated electron-hole pairs. The operating conditions such as 3 h of contact time for photocatalysis reaction (WO3/1% GO), 10 h hydraulic retention time for MBR and 100 kPa of transmembrane pressure were optimised. Chemical oxygen demand removal efficiency of 48% was attained with photocatalysis, and the removal efficiency was further increased up to 76% when integrated with MBR. The colour removal efficiency after photocatalysis was 25% further increased up to 70% with MBR. Complete total suspended solid removal has been achieved with this hybrid system.

Synthesis of Fe2SiO4-Fe7Co3 Nanocomposite Dispersed in the Mesoporous SBA-15: Application as Magnetically Separable Adsorbent.

The mixture containing alloy and oxide with iron-based phases has shown interesting properties compared to the isolated species and the synergy between the phases has shown positive effect on dye adsorption. This paper describes the synthesis of Fe2SiO4-Fe7Co3-based nanocomposite dispersed in Santa Barbara Amorphous (SBA)-15 and its application in dye adsorption followed by magnetic separation. Thus, it was studied the variation of reduction temperature and amount of hydrogen used in synthesis and the effect of these parameters on the physicochemical properties of the iron and cobalt based oxide/alloy mixture, as well as the methylene blue adsorption capacity. The XRD and Mössbauer results, along with the temperature-programmed reduction (TPR) profiles, confirmed the formation of Fe2SiO4-Fe7Co3-based nanocomposites. Low-angle XRD, N2 isotherms, and TEM images show the formation of the SBA-15 based mesoporous support with a high surface area (640 m2/g). Adsorption tests confirmed that the material reduced at 700 °C using 2% of H2 presented the highest adsorption capacity (49 mg/g). The nanocomposites can be easily separated from the dispersion by applying an external magnetic field. The interaction between the dye and the nanocomposite occurs mainly by π-π interactions and the mixture of the Fe2SiO4 and Fe7Co3 leads to a synergistic effect, which favor the adsorption.

Application of Natural Pigments in Ordinary Cooked Ham.

The possibility of obtaining a carmine or pink color on ordinary cooked ham by applying natural dyes from three plant species, namely red radish (Raphanus sativus L.), hibiscus (Roselle sabdariffa L.) and red beetroot (Beta vulgaris L.), was investigated. The extracts were evaluated for the stability at physical-chemical parameters and subjected to cytotoxicity assays in the gastric cell line AGS Encapsulation of the extracts in soybean lecithin liposomes and maltodextrin microcapsules was performed. Lyophilized extracts before and after encapsulation in maltodextrin were applied in the formulation of ordinary cooked ham and used in a pilot scale of production. The color of cooked ham samples from different assays was evaluated visually and by colorimetry. The results suggest that the coloration of ordinary cooked ham obtained with extracts of red beetroot is very promising for future applications in this type of meat product.