Cyclopentane rings in hydrophobic chains of a phospholipid enhance the bilayer stability to electric breakdown.

Archaeal lipids ensure unprecedented stability of archaea membranes in extreme environments. Here, we incorporate a characteristic structural feature of an archaeal lipid, the cyclopentane ring, into hydrocarbon chains of a short-chain (C12) phosphatidylcholine to explore whether the insertion would allow such a lipid (1,2-di-(3-(3-hexylcyclopentyl)-propanoate)-sn-glycero-3-phosphatidylcholine, diC12cp-PC) to form stable bilayers at room temperature. According to fluorescence-based assays, in water diC12cp-PC formed liquid-crystalline bilayers at room temperature. Liposomes produced from diC12cp-PC retained calcein for over a week when stored at +4 °C. diC12cp-PC could also form model bilayer lipid membranes that were by an order of magnitude more stable to electrical breakdown than egg PC membranes. Molecular dynamics simulation showed that the cyclopentane fragment fixes five carbon atoms (or four C-C bonds), which is compensated by the higher mobility of the rest of the chain. This was found to be the reason for the remarkable stability of the diC12cp-PC bilayer: restricted conformational mobility of a chain segment increases the membrane bending modulus (compared to a normal hydrocarbon chain of the same length). Here, higher stiffness practically does not affect the line tension of a membrane pore edge. Rather it makes it more difficult for diC12cp-PC to rearrange in order to line the edge of a hydrophilic pore; therefore, fewer pores are formed.

UV-promoted radical formation, and near-IR-induced and spontaneous conformational isomerization in monomeric 9-methylguanine isolated in low-temperature Ar matrices.

Three low-energy isomers of 9-methylguanine, the amino-oxo (AO) form and two amino-hydroxy (AH1 and AH2) conformers, were trapped from the gas phase into low-temperature argon matrices. The AH1 and AH2 isomers, differing in the orientation of the OH group, were found to transform into each other upon excitation with near-IR light. The population of the AO form of the compound was not changed upon any near-IR irradiation of the matrix samples. Using monochromatic near-IR light, generated by a frequency-tunable laser source, it was possible to selectively induce the AH1 → AH2 or AH2 → AH1 conversion. Photoreversibility of this conformational transformation was then demonstrated. Exposure of matrix-isolated monomers of 9-methylguanine to broadband near-IR light also led to conformational conversions within the amino-hydroxy tautomeric form; the final stage of this process was always the same photostationary state independent of the initial ratio of AH1 and AH2 populations. Spontaneous conformational conversion, transforming the higher-energy AH2 form into the lower-energy AH1 isomer, was observed for matrix-isolated monomers of 9-methylguanine kept in the dark. The mechanism of this process must rely on quantum tunneling of the light hydrogen atom. Irradiation of matrix-isolated 9-methylguanine with UV laser light at λ = 288 or 285 nm led to a substantial consumption of the two AH forms, while the amount of AO isomer remained unchanged. On the other hand, a decrease in the population of the AO isomer occurred upon excitations at shorter wavelengths, λ = 280 or 275 nm. The spectral changes observed after UV-irradiation suggest the generation (and stabilization in the matrix) of a radical species, resulting from the photocleavage of the O-H or N1-H bonds, in the AH or AO isomer, respectively.

Instability-induced pattern formation of photoactivated functional polymers.

Since the pioneering work of Turing on the formation principles of animal coat patterns [Turing AM (1952) Phil Trans R Soc Lond B 237(641):37-72], such as the stripes of a tiger, great effort has been made to understand and explain various phenomena of self-assembly and pattern formation. Prominent examples are the spontaneous demixing in emulsions, such as mixtures of water and oil [Herzig EM, et al. (2007) Nat Mater 6:966-971]; the distribution of matter in the universe [Kibble TWB (1976) J Phys A: Math Gen 9(8):1387]; surface reconstruction in ionic crystals [Clark KW, et al. (2012) Nanotechnol 23(18):185306]; and the pattern formation caused by phase transitions in metal alloys, polymer mixtures and binary Bose-Einstein condensates [Sabbatini J, et al. (2011) Phys Rev Lett 107:230402]. Photoactivated pattern formation in functional polymers has attracted major interest due to its potential applications in molecular electronics and photoresponsive systems. Here we demonstrate that photoactivated pattern formation on azobenzene-containing polymer films can be entirely explained by the physical concept of phase separation. Using experiments and simulations, we show that phase separation is caused by an instability created by the photoactivated transitions between two immiscible states of the polymer. In addition, we have shown in accordance with theory, that polarized light has a striking effect on pattern formation indicated by enhanced phase separation.

Crystal structure of the nucleosome containing ultraviolet light-induced cyclobutane pyrimidine dimer.

The cyclobutane pyrimidine dimer (CPD) is induced in genomic DNA by ultraviolet (UV) light. In mammals, this photolesion is primarily induced within nucleosomal DNA, and repaired exclusively by the nucleotide excision repair (NER) pathway. However, the mechanism by which the CPD is accommodated within the nucleosome has remained unknown. We now report the crystal structure of a nucleosome containing CPDs. In the nucleosome, the CPD induces only limited local backbone distortion, and the affected bases are accommodated within the duplex. Interestingly, one of the affected thymine bases is located within 3.0 Å from the undamaged complementary adenine base, suggesting the formation of complementary hydrogen bonds in the nucleosome. We also found that UV-DDB, which binds the CPD at the initial stage of the NER pathway, also efficiently binds to the nucleosomal CPD. These results provide important structural and biochemical information for understanding how the CPD is accommodated and recognized in chromatin.

Crystal Structure and Photocatalytic Activity of Al-Doped TiO2 Nanofibers for Methylene Blue Dye Degradation.

Al-TiO2 nanofibers were prepared using a sol-gel derived electrospinning by varying the Al/Ti molar ratio from 0 to 0.73 to investigate the effect of Al doping on the crystal structure and the photocatalytic activity of Al-TiO2 for methylene blue (MB) degradation. XRD results indicated that as the Al/Ti molar ratio rose, crystal structure of Al-TiO2 was changed from anatase/rutile (undoped), anatase (0.07-0.18), to amorphous phase (0.38-0.73), which was confirmed by XPS and Raman analysis. The degradation kinetic constant increased from 7.3 x 10(-4) min(-1) to 4.5 x 10(-3) min(-1) with the increase of Al/Ti molar ratios from 0 to 0.38, but decreased to 3.4 x 10(-3) min(-1) when the Al/Ti molar ratio reached 0.73. The Al-TiO2 catalyst doped with 0.38 Al/Ti molar ratio demonstrated the best MB degradation. Experimental results indicated that the Al doping in Al-TiO2 was mainly attributed to the crystal structure of TiO2 and the photocatalytic degradation of MB.

Highly Efficient Far Red/Near-Infrared Solid Fluorophores: Aggregation-Induced Emission, Intramolecular Charge Transfer, Twisted Molecular Conformation, and Bioimaging Applications.

The development of organic fluorophores with efficient solid-state emissions or aggregated-state emissions in the red to near-infrared region is still challenging. Reported herein are fluorophores having aggregation-induced emission ranging from the orange to far red/near-infrared (FR/NIR) region. The bioimaging performance of the designed fluorophore is shown to have potential as FR/NIR fluorescent probes for biological applications.

Electron photodetachment dissociation for structural characterization of synthetic and bio-polymer anions.

Tandem mass spectrometry (MS-MS) is a generic term evoking techniques dedicated to structural analysis, detection or quantification of molecules based on dissociation of a precursor ion into fragments. Searching for the most informative fragmentation patterns has led to the development of a vast array of activation modes that offer complementary ion reactivity and dissociation pathways. Collisional activation of ions using atoms, molecules or surface resulting in unimolecular dissociation of activated ions still plays a key role in tandem mass spectrometry. The discovery of electron capture dissociation (ECD) and then the development of other electron-ion or ion/ion reaction methods, constituted a significant breakthrough, especially for structural analysis of large biomolecules. Similarly, photon activation opened promising new frontiers in ion fragmentation owing to the ability of tightly controlled internal energy deposition and easy implementation on commercial instruments. Ion activation by photons includes slow heating methods such as infrared multiple photon dissociation (IRMPD) and black-body infrared radiative dissociation (BIRD) and higher energy methods like ultra-violet photodissociation (UVPD) and electron photo detachment dissociation (EPD). EPD occurs after UV irradiation of multiply negatively charged ions resulting in the formation of oxidized radical anions. The present paper reviews the hypothesis regarding the mechanisms of electron photo-detachment, radical formation and direct or activated dissociation pathways that support the observation of odd and even electron product ions. Finally, the value of EPD as a complementary structural analysis tool is illustrated through selected examples of synthetic polymers, oligonucleotides, polypeptides, lipids, and polysaccharides.

Gas-phase study on uridine: Conformation and X-ray photofragmentation.

Fragmentation of RNA nucleoside uridine, induced by carbon 1s core ionization, has been studied. The measurements by combined electron and ion spectroscopy have been performed in gas phase utilizing synchrotron radiation. As uridine is a combination of d-ribose and uracil, which have been studied earlier with the same method, this study also considers the effect of chemical environment and the relevant functional groups. Furthermore, since in core ionization the initial core hole is always highly localized, charge migration prior to fragmentation has been studied here. This study also demonstrates the destructive nature of core ionization as in most cases the C 1s ionization of uridine leads to concerted explosions producing only small fragments with masses ≤43 amu. In addition to fragmentation patterns, we found out that upon evaporation the sugar part of the uridine molecule attains hexagonal form.

Photoinduced symmetry-breaking intramolecular charge transfer in a quadrupolar pyridinium derivative.

We report here a joint experimental and theoretical study of a quadrupolar, two-branched pyridinium derivative of interest as a potential non-linear optical material. The spectral and photophysical behaviour of this symmetric system is greatly affected by the polarity of the medium. A very efficient photoinduced intramolecular charge transfer, surprisingly more efficient than in the dipolar asymmetric analogue, is found to occur by femtosecond resolved transient absorption spectroscopy. TD-DFT calculations are in excellent agreement with these experimental findings and predict large charge displacements in the molecular orbitals describing the ground state and the lowest excited singlet state. The theoretical study also revealed that in highly polar media the symmetry of the excited state is broken giving a possible explanation to the fluorescence and transient absorption spectra resembling those of the one-branched analogous compound in the same solvents. The present study may give an important insight into the excited state deactivation mechanism of cationic (donor-π-acceptor-π-donor)(+) quadrupolar compounds characterised by negative solvatochromism, which are expected to show significant two-photon absorption (TPA). Moreover, the water solubility of the investigated quadrupolar system may represent an added value in view of the most promising applications of TPA materials in biology and medicine.

UV-tunable laser induced phototransformations of matrix isolated anethole.

A matrix isolation study of the infrared spectra and structure of anethole (1-methoxy-4-(1-propenyl)benzene) has been carried out, showing the presence of two E conformers (AE1, AE2) of the molecule in the as-deposited matrices. Irradiation using ultraviolet-tunable laser light at 308-307 nm induced conformationally selective phototransformations of these forms into two less stable Z conformers (AZ1, AZ2). The back reactions were also detected upon irradiation at 301 nm. On the whole, the obtained results allow for full assignment of the infrared spectra of all the four experimentally observed anethole isomers and showed that the narrowband UV-induced E-Z photoisomerization is an efficient and selective way to interconvert the two isomers of anethole into each other, with conformational discrimination. Photolysis of anethole was observed as well, with initial methoxyl O-C bond cleavage and formation of CH3 and p-propenylphenoxy (AR) radicals, followed by radical recombination to form 2-methyl-4-propenyl-2,4-cyclohexadienone, which subsequently undergoes ring-opening generating several conformers of long-chain conjugated ketenes. Interpretation of the experimental observations was supported by density functional theory (B3LYP and B2PLYD) calculations.

Electron-induced hydrogen loss in uracil in a water cluster environment.

Low-energy electron-impact hydrogen loss due to dissociative electron attachment (DEA) to the uracil and thymine molecules in a water cluster environment is investigated theoretically. Only the A(')-resonance contribution, describing the near-threshold behavior of DEA, is incorporated. Calculations are based on the nonlocal complex potential theory and the multiple scattering theory, and are performed for a model target with basic properties of uracil and thymine, surrounded by five water molecules. The DEA cross section is strongly enhanced when the attaching molecule is embedded in a water cluster. This growth is due to two effects: the increase of the resonance lifetime and the negative shift in the resonance position due to interaction of the intermediate negative ion with the surrounding water molecules. A similar effect was earlier found in DEA to chlorofluorocarbons.

Ultrafast laser ablation in liquids for nanomaterials and applications.

We present an inclusive overview of the ultrafast ablation technique performed in liquids. Being a comparatively new method, we bring out the recent progress achieved, present the challenges ahead, and outline the future prospects for this technique. The review is conveniently divided into five parts: (a) a succinct preamble to the technique of ultrafast ablation in liquids (ULAL) is provided. A brief introduction to the conventional ns ablation is also presented for the sake of completeness (b) fundamental physical processes involved in this technique are elaborated (c) specific advantages of the technique compared to other physical and chemical methodologies are enumerated (d) applications of this technique in photonics; biomedical and explosives detection [using surface-enhanced Raman scattering (SERS)] is updated (e) future prospects describing the potential of this technique for creating unique nanoparticles (NPs) and nanostructures (NSs) for niche applications. We also discuss some of the recently reported significant results achieved in a variety of materials, especially metals, using this technique. Furthermore, we present some of our own experimental data obtained from ULAL of Ag, Cu, and Zn in a variety of liquids such as acetone, water, acetonitrile etc. The generated NPs (colloidal solutions) and NSs (on substrates) have been successfully utilized for nonlinear optical, SERS, and biomedical applications.

Nanopatterning by laser interference lithography: applications to optical devices.

A systematic review, covering fabrication of nanoscale patterns by laser interference lithography (LIL) and their applications for optical devices is provided. LIL is a patterning method. It is a simple, quick process over a large area without using a mask. LIL is a powerful technique for the definition of large-area, nanometer-scale, periodically patterned structures. Patterns are recorded in a light-sensitive medium that responds nonlinearly to the intensity distribution associated with the interference of two or more coherent beams of light. The photoresist patterns produced with LIL are the platform for further fabrication of nanostructures and growth of functional materials used as the building blocks for devices. Demonstration of optical and photonic devices by LIL is reviewed such as directed nanophotonics and surface plasmon resonance (SPR) or large area membrane reflectors and anti-reflectors. Perspective on future directions for LIL and emerging applications in other fields are presented.

Electronic and structural response of nanomaterials to ultrafast and ultraintense laser pulses.

The interaction of materials with ultrafast and ultraintense laser pulses is a current frontier of science both experimentally and theoretically. In this review, we briefly discuss some recent theoretical studies by the present authors with our method of semiclassical electron-radiation-ion dynamics (SERID). In particular, Zhou et al. and Jiang et al. respectively, determined the optimal duration and optimal timing for a series of femtosecond scale laser pulses to excite a specific vibrational mode in a general chemical system. A set of such modes can be used as a "fingerprint" for characterizing a particular molecule or a complex in a solid. One can therefore envision many applications, ranging from fundamental studies to detection of chemical or biological agents. Allen et al. proved that dimers are preferentially emitted during photofragmentation of C60 under an ultrafast and ultraintense laser pulse. For interactions between laser pulses and semiconductors, e.g., GaAs, Si and InSb, besides experimentally accessible optical properties--epsilon(omega) and chi(2)-Allen et al. offered many other indicators to confirm the nonthermal nature of structural changes driven by electronic excitations and occurring during the first few hundred femtoseconds. Lin et al. found that, after the application of a femtosecond laser pulse, excited electrons in materials automatically equilibrate to a Fermi-Dirac distribution within roughly 100 fs, solely because of their coupling to the nuclear motion, even though the resulting electronic temperature is one to two orders of magnitude higher than the kinetic temperature defined by the nuclear motion.

Pulse laser deposited nanostructured ZnO thin films: a review.

This review summarizes the work principles of pulse laser deposition (PLD) apparatus, physical processes like ablation, and plasma plume formation accompanying the deposition of un-doped ZnO from target to substrate material. Various modes of deposition and factors influencing the properties of thin films such as substrate temperature, background gas pressure, laser energy density (laser fluence), target to substrate distance, repetition rate, oxygen partial pressure in deposition chamber, deposition time and post growth annealing which control deposition parameters such as adsorption, desorption, surface diffusion, nucleation, and crystallization/re-crystallization are also discussed in this review. Moreover, various film properties such as morphology, roughness of the film surface, film thickness, grain size, optical transmittance, sensitivity, electrical conductivity, uniformity and electrical resistivity of the deposited ZnO thin films have also been enumerated in the present review.

General hydrophobic interaction potential for surfactant/lipid bilayers from direct force measurements between light-modulated bilayers.

We establish and quantify correlations among the molecular structures, interaction forces, and physical processes associated with light-responsive self-assembled surfactant monolayers or bilayers at interfaces. Using the surface forces apparatus (SFA), the interaction forces between adsorbed monolayers and bilayers of an azobenzene-functionalized surfactant can be drastically and controllably altered by light-induced conversion of trans and cis molecular conformations. These reversible conformation changes affect significantly the shape of the molecules, especially in the hydrophobic region, which induces dramatic transformations of molecular packing in self-assembled structures, causing corresponding modulation of electrostatic double layer, steric hydration, and hydrophobic interactions. For bilayers, the isomerization from trans to cis exposes more hydrophobic groups, making the cis bilayers more hydrophobic, which lowers the activation energy barrier for (hemi)fusion. A quantitative and general model is derived for the interaction potential of charged bilayers that includes the electrostatic double-layer force of the Derjaguin-Landau-Verwey-Overbeek theory, attractive hydrophobic interactions, and repulsive steric-hydration forces. The model quantitatively accounts for the elastic strains, deformations, long-range forces, energy maxima, adhesion minima, as well as the instability (when it exists) as two bilayers breakthrough and (hemi)fuse. These results have several important implications, including quantitative and qualitative understanding of the hydrophobic interaction, which is furthermore shown to be a nonadditive interaction.

Electro-optical switching by liquid-crystal controlled metasurfaces.

We study the optical response of a metamaterial surface created by a lattice of split-ring resonators covered with a nematic liquid crystal and demonstrate millisecond timescale switching between electric and magnetic resonances of the metasurface. This is achieved due to a high sensitivity of liquid-crystal molecular reorientation to the symmetry of the metasurface as well as to the presence of a bias electric field. Our experiments are complemented by numerical simulations of the liquid-crystal reorientation.

Novel microwave assisted synthesis of ZnS nanomaterials.

A novel ambient pressure microwave assisted technique is developed in which silver and indium-modified ZnS is synthesized. The as-prepared ZnS is characterized by x-ray diffraction, UV-vis spectroscopy, x-ray photoelectron spectroscopy and luminescence spectroscopy. This procedure produced crystalline materials with particle sizes below 10 nm. The synthesis technique leads to defects in the crystal which induce mid-energy levels in the band gap and lead to indoor light photocatalytic activity. Increasing the amount of silver causes a phase transition from cubic blende to hexagonal phase ZnS. In a comparative study, when the ZnS cubic blende is heated in a conventional chamber furnace, it is completely converted to ZnO at 600 °C. Both cubic blende and hexagonal ZnS show excellent photocatalytic activity under irradiation from a 60 W light bulb. These ZnS samples also show significantly higher photocatalytic activity than the commercially available TiO(2) (Evonik-Degussa P-25).

Orientation-controlled growth and optical properties of diverse Ag nanoparticles on Si(100) and Si(111) wafers.

Well-controlled growth of Ag nanoparticles (NPs) on Si substrates is important for next generation Si-based optoelectronic devices, but only randomly oriented Ag NPs have been previously reported. In this work, well-oriented Ag NPs with regular shapes are pseudomorphically grown on Si(100) and Si(111) substrates with crystallographic relationships of {100} mathematical left angle bracket 010 mathematical right angle bracket Ag ∥ {100} mathematical left angle bracket 010 mathematical right angle bracket Si and {111} mathematical left angle bracket 110 mathematical right angle bracket Ag ∥ {111} mathematical left angle bracket 110 mathematical right angle bracket Si, respectively. From a cross-sectional image, the Ag NPs on Si(100) substrates penetrate into Si and generate an inverted pyramid-like structure terminated by {111} planes embedded in Si substrates. In contrast, the Ag NPs on Si(111) substrates show flat morphology with the top plane terminated by Ag {111}. The Si underneath Ag NPs was not penetrated by Ag and a SiO(2) layer was formed between Ag and Si. Photoluminescence spectra of the Ag NPs show ultraviolet emissions centered in the 340-343 nm range. The mathematical left angle bracket 111 mathematical right angle bracket-oriented Ag particles show stronger emissions with an extra peak at 343 nm compared with mathematical left angle bracket 100 mathematical right angle bracket-oriented Ag NPs. Raman spectra show that the mathematical left angle bracket 100 mathematical right angle bracket - and mathematical left angle bracket 111 mathematical right angle bracket-oriented Ag NPs can enhance the peak intensity of Si(100) and Si(111) by 45.3% and 32.5%, respectively. The orientation-controlled Ag NPs with anisotropic optical properties are promising materials for Si-based optoelectronics.

Looking at radiation damage on prebiotic building blocks.

A number of complex organic molecules have been detected in the interstellar medium, as well as in meteorites or comets. Among them, some exobiologic-relevant molecules have attracted particular interest. In the hypothesis of an exogen transport of prebiotic building blocks at the origin of life, the survival of such species and particularly their resistance to the solar UV radiation or cosmic rays is a key issue. For that purpose, we have performed a theoretical approach of the charge transfer dynamics induced by collision of protons with nucleobases and the 2-deoxy-d-ribose sugar moiety in a wide collision energy range. Calculations have been carried out by means of ab initio quantum chemistry molecular methods and compared to previous theoretical results using carbon projectile ions. Qualitative trends can be exhibited on DNA or RNA building blocks damage, which may concern studies on prebiotic species under spatial radiation.