Rare presentation of maxillary osteonecrosis and tooth exfoliation induced by herpes zoster infection in a 29-year-old Chinese male: a case report and literature review.

BACKGROUND: We present a case of a 29-year-old male patient without immunodeficiency who suffered from rapid osteonecrosis and tooth exfoliation resulting from herpes zoster (HZ) infection in the left maxillary branch of the trigeminal nerve. Various complications associated with shingles infections have been reported, cases of osteonecrosis and tooth exfoliation due to HZ infection among young people without immunodeficiency are rare. In this case, we focus on the particular manifestation of HZ infection. CASE PRESENTATION: The patient presented with clusters of erythema and papules, along with non-hemorrhagic blisters on the left face and the loss of the left upper incisor. All lesions were localized to the left side of the face without exceeding the midline. After receiving antibacterial and antiviral treatment, successful control over the infection was achieved; however, he experienced the loss of all upper teeth on the left side except for the first and second upper left molars. CONCLUSION: This case highlights that rapid osteonecrosis and tooth exfoliation may occur among young individuals without immunodeficiency after HZ infection. HZ infection of the face should be taken very seriously to obtain prompt treatment to prevent the rare complications of bone necrosis and tooth loss as much as possible.

[Innovative methods and developments in oral care. 3D planning in oral and maxillofacial surgery]. / Serie: Innovatieve technieken en ontwikkelingen in de mondzorg. 3D-planning in de mka-chirurgie.

With the use of cone beam computed tomography, intraoral scanning and 3D stereophotogrammetry, a virtual 3D head model of a patient can be reconstructed with image fusion. In this way, the malposition, deficiency and other anomalies at the level of bone, dentition and soft tissue can be quantified objectively. The desired position of the dentition, occlusion and soft tissue in the facial profile can be virtually drawn in and used as a guideline for treatment planning. Based on the principle of backward planning, it is possible to determine what repositioning of the jaw is required, where there is a need for bone augmentation and how many dental implants are necessary to obtain the desired treatment outcome. From this perspective, 3D treatment planning has become a treatment standard for the 4 clinical pillars supporting oral and maxillofacial surgery, specifically orthognathic surgery, implantology, craniofacial surgery and head & neck oncology. 3D planning has influenced today's workflow, planning of complex surgery and contributed to useful further innovations and efficient healthcare.

Complications According to the Handling of the Pterygoid Plate During Bimaxillary Surgery.

BACKGROUND: During bimaxillary surgery, manipulation of the pterygoid plate is required to facilitate movement of the maxilla. This study examined the complications that occurred after handling the pterygoid plate during a Le Fort I osteotomy. PATIENTS AND METHODS: This study compared and analyzed complications according to the pterygoid plate handling method in 80 patients who underwent bimaxillary surgery at Pusan National University Dental Hospital from December 2015 to July 2020. The pterygoid plate was fractured or removed intentionally only if it interfered with the maxilla. Otherwise, it was not treated. The complications during surgery and the follow-up period were investigated. RESULTS: Fourteen patients experienced complications, of which excessive bleeding, hearing problems, and nonunion were encountered in 10, 2, and 2 patients, respectively. Of the 10 patients with excessive bleeding patients, the pterygoid plate was manipulated in 8 patients, which was controlled during surgery. Two patients complained of hearing loss with ear congestion immediately after surgery; both patients improved spontaneously within 1 month. Two nonunion patients underwent plate refixation at least 6 months postoperatively, and normal healing was achieved afterward. CONCLUSIONS: Fracture and removal of the pterygoid plate during orthognathic surgery did not significantly affect the occurrence of complications during and after surgery.

Biomechanical Behavior of All-on-4 and M-4 Configurations in an Atrophic Maxilla: A 3D Finite Element Method.

BACKGROUND In edentulous patients, the concept of 4 implants with early loading has been widely used in clinical settings. In the case of bone atrophy in the anterior maxilla, using short implants or an angulated implant may be a good choice for treatment. The occlusal scheme remains a key aspect of All-on-4. The aim of this study was to use the 3-dimensional (3D) finite element method (FEM) to evaluate how different All-on-4 designs for canine-guided and group function occlusion affected the distribution of stress in the atrophic premaxilla. MATERIAL AND METHODS A 3D edentulous maxilla model was created and in 3D FEM, 3 different configurations - M4, All-on-4, and short implant - were modeled by changing the anterior implants and using 2 different occlusal schemes. For each model, the occlusal load was applied to simulate lateral movements. For cortical bone, the maximum and minimum principal stress values were generated, and for ductile materials, von Mises stress values were obtained. RESULTS No significant differences were detected among the models; generally, however, the highest stress values were observed in the M-4 model and the models with short implants. Slightly higher stress values were observed in the group function occlusion group than in the canine-guided occlusion group. CONCLUSIONS To promote better primary stabilization, M-4 or short implant configurations with canine-guided occlusion appear to be preferable for patients who have severe atrophy in the anterior maxilla.

Prefabricated Composite Tissues for the Reconstruction of Complex Maxillary Defects: Functional and Aesthetic Principles.

The anatomical structures of the maxilla include the mucosa lining attached to the bone in a pneumatized "light weight construction" to support facial tissues and to provide physiological oral and nasal function. Therefore, the anatomically correct restoration of the maxilla in the case of "full thickness defects" still represents a barely resolved surgical challenge from a functional and aesthetic point of view. Since exactly similar tissues are hardly available for reconstructive purposes, reconstruction with various flaps remains highly accepted.As there is no clear evidence, that any reconstructive option is superior to another, the surgeon's preference remains the main factor determining the treatment of choice for maxillary defects.In order to provide for an anatomically correct reconstruction the concept of prefabrication of bone grafts accompanying soft tissues flaps could have a valuable option. This concept has been presented in the past but still has not gained wide acceptance. In this review paper, the authors will discuss the philosophy of our rational and approach, present details of the reconstruction to achieve improved functional and aesthetic results for full thickness maxillary defects based in almost 30 years of experience.

Three-Dimensional Bioprinting: Role in Craniomaxillary Surgery Ethics and Future.

Three-dimensional (3D) printing and bioprinting is gaining lot of momentum, especially in surgical specialties. These two technologies have wide array of applications in presurgical, surgical, and in vitro scenarios. Bioprinting can generate customized patient specific tissue engineered from specialized cells. This technology can be a gold standard in reconstructive and regenerative surgeries, if used in regulated and ethical environment. This communication focuses on basics of these technologies, their role in surgical specialties, ethical issues specific to these technologies, and its future.

Best Practice Guidelines for the Management of Acute Craniomaxillofacial Trauma During the COVID-19 Pandemic.

Coronavirus disease 2019 (COVID-19) is an infectious disease that is caused by severe respiratory syndrome coronavirus 2. Although elective surgical procedures are being cancelled in many parts of the world during the COVID-19 pandemic, acute craniomaxillofacial (CMF) trauma will continue to occur and will need to be appropriately managed. Surgical procedures involving the nasal, oral, or pharyngeal mucosa carry a high risk of transmission due to aerosolization of the virus which is known to be in high concentration in these areas. Intraoperative exposure to high viral loads through aerosolization carries a very high risk of transmission, and the severity of the disease contracted in this manner is worse than that transmitted through regular community transmission. This places surgeons operating in the CMF region at particularly high risk during the pandemic. There is currently a paucity of information to delineate the best practice for the management of acute CMF trauma during the COVID-19 pandemic. In particular, a clear protocol describing optimal screening, timing of intervention and choice of personal protective equipment, is needed. The authors have proposed an algorithm for management of CMF trauma during the COVID-19 pandemic to ensure that urgent and emergent CMF injuries are addressed appropriately while optimizing the safety of surgeons and other healthcare providers. The algorithm is based on available evidence at the time of writing. As the COVID-19 pandemic continues to evolve and more evidence and better testing becomes available, the algorithm should be modified accordingly.

The Accuracy of Maxillary Position Using a Computer-Aided Design/Computer-Aided Manufacturing Intermediate Splint Derived Via Surgical Simulation in Bimaxillary Orthognathic Surgery.

PURPOSE: The purpose of this study was to assess the clinical interventions and the accuracy of maxillary reposition using a computer-aided design/computer-aided manufacturing (CAD/CAM) splint derived via surgical simulation. MATERIALS AND METHODS: The retrospective study comprised 24 patients who underwent bimaxillary surgery. The patients were assigned to 1 of 2 groups by a way of maxillary repositioning. One group received conventional intermediate wafers and the other CAD/CAM wafers during Le Fort I osteotomy. We recorded operation time, blood loss, the operative accuracy. Accuracy was analyzed by 3-dimensional computed tomography images before and immediately after the operation. The evaluation points were the right maxillary first incisor (U1), the right maxillary second molar (M2-right), and the left maxillary second molar (M2-left). RESULTS: The 2 groups did not differ significantly in operation time and blood losses. The vertical axis of U1 data differed significantly between the 2 groups (P = 0.008). None of the horizontal, vertical, or anteroposterior axis of M2-right data differed significantly, and anteroposterior axis of M2-left data differed significantly (P = 0.0296). The CAD/CAM group 3-dimensional distance errors were less than those of the conventional group for all points. CONCLUSION: Placement of CAD/CAM splint allowed highly accurate repositioning; the accuracy exceeded that afforded by conventional model surgery using a facebow and articulator.

How Is the Created Alveolar Space Finally Restored After Maxillary Anterior Segmental Distraction Osteogenesis?

OBJECTIVE: Maxillary anterior segmental distraction osteogenesis (MASDO) for cleft and palate patients is the alternative treatment option to correct malocclusion with maxillary arch deficiency and severe crowding. After MASDO, prosthetic considerations are crucial for patients with cleft lip and palate because it is related to facial esthetics and occlusal function. The objectives of this study were to investigate the final restoration type for created alveolar space by MASDO. METHODS: Thirteen patients with cleft lip and palate who underwent MASDO and orthodontic treatment from the years 2000 to 2010 in Yonsei University were examined. Final restorations are classified as dental implants, conventional prosthesis, and orthodontic space closure. The relationship between the distracted areas and final restoration type was investigated. The authors evaluated lateral cephalograms obtained at predistraction osteogenesis (pre-DO; T1), postdistraction osteogenesis (post-DO; T2), and debond (T3), and measured changes from T1 to T2 and from T2 to T3. RESULTS: There was no significant difference of final restoration percentage of dental implants, conventional prosthesis, and space closure with orthodontic treatment. However, dental implants and conventional prostheses were applied more frequently in the posterior area and in the anterior area, respectively. The relapse rate was observed as 36.7% and 22.4% in the values of N-A distance and ANB angulation in T2-T3 stage. CONCLUSION: The MASDO site should be decided, based on final restoration goal. Among the created alveolar spaces, implants were applied mainly to the posterior site and the conventional prostheses were mostly restored to the anterior site. For space closure by orthodontic approach, the area could be both anterior or posterior.

Variability in Current Procedural Terminology Codes for Craniomaxillofacial Trauma Reconstruction: A National Survey.

BACKGROUND: Current Procedural Terminology (CPT) codes are an important part of surgical documentation and billing for services provided within the United States. This limited coding language presents a challenge in the heterogenous and rapidly evolving field of craniofacial surgery. The authors aimed to survey members of the American Society of Maxillofacial Surgery (ASMS) to characterize the variability in coding practices in the surgical management of craniofacial trauma. METHODS: A cross-sectional of 500 members of the ASMS survey was carried out. Descriptive statistics were calculated. The effect of various practice characteristics on coding practices was evaluated using Chi-squared tests and Fisher's exact tests. RESULTS: In total, 79 participants responded including 77 plastic surgeons. About 75% worked in academic centers and 38% reported being in practice over 20 years. Coding practices were not significantly associated with training background or years in practice. Unilateral mandibular and unilateral nasoorbitoethmoid fractures demonstrated the greatest agreement with 99% and 88% of respondents agree upon a single coding strategy, respectively. Midface fractures, bilateral nasoorbitoethmoid fractures, and more complex mandibular demonstrated considerable variability in coding. CONCLUSION: There is a wide variability among members of the ASMS in CPT coding practices for the operative management of craniofacial trauma. To more accurately convey the complexity of craniofacial trauma reconstruction to billers and insurance companies, the authors must develop a more descriptive coding language that captures the heterogeneity of patient presentation and surgical procedures.

Modified V-Y Myocutaneous Flap With Vascular Pedicle for the Repair of Maxillofacial Skin Defects.

OBJECTIVE: It is challenging to repair postoperative defect caused by skin tumor resection on the maxillofacial, which not only affects appearance but also impairs functions. To better repair skin defect on the maxillofacial, the application value of V-Y vascular myocutaneous flap was introduced in our study. METHODS: Between June 2011 and December 2018, 16 patients with maxillofacial skin tumors who received extensive resection were enrolled in our study. The defect on the maxillofacial was repaired by V-Y vascular myocutaneous flap. The follow-up period lasted for 12 to 24 months. RESULTS: All 16 cases of myocutaneous flaps survived with 1 case of partial venous congestion and 1 case of partial distal necrosis. No recurrence occurred during follow-up. The color and texture of myocutaneous flaps like those of the surrounding skin. CONCLUSION: Featured with better freeness, larger repair range and aesthetic effect of "kite" flaps, V-Y vascular myocutaneous flap can repair the superior border of zygomatic arch pedicled with facial artery and repair 1.5 cm above the superior border of zygomatic arch pedicled with transverse facial artery for elderly patients in Asia.

Is a Final Splint Necessary in Bimaxillary Orthognathic Surgery?

For bimaxillary orthognathic surgery, a splint is commonly used to achieve the final occlusion and is then maintained through initial skeletal healing. The purpose of this study is to document how often a final splint is used to achieve the planned intraoperative occlusion, and how often is the final splint retained after surgery to maintain the occlusion during the initial skeletal healing phase.The investigators developed a retrospective case series. The study variables were demographic and operative. The outcome variables were the use of a final splint to achieve the desired intraoperative occlusion; the frequency and clinical indication for maintaining the final splint during the 5-weeks of initial skeletal healing; and the occlusion achieved after initial healing (5 weeks) compared to that planned from model surgery. Descriptive statistics were reported.The study sample was composed of 41 consecutive subjects. The mean age at operation was 26.9 ±â€Š11.8 years and 51% of the subjects were male. Twenty-five subjects required segmental maxillary surgery. The final splint was used in 39% of subjects to achieve final occlusion and maintained postoperatively in only 10%. No subjects developed transverse relapse during the initial healing phase (5-weeks). All subjects with planned immediate mid-arch open-bites (n = 8) showed vertical improvement or closure during the initial healing when the splint was not maintained.The use of a final occlusal splint and then maintenance of the splint through initial skeletal healing is not required in the majority of bimaxillary orthognathic surgery cases to achieve the planned occlusion.

Application of Suprafascially Harvested Anterolateral Thigh Perforator Flap for the Reconstruction of Oral and Maxillofacial Defects.

PURPOSE: The aim of this study was to evaluate the feasibility and efficacy of the suprafascially elevated anterolateral thigh (ALT) perforator flap for reconstructing oral and maxillofacial defects. PATIENTS AND METHODS: The authors analyzed a retrospective case series of 15 patients who underwent reconstruction of oral and maxillofacial defects with the suprafascially raised ALT perforator flap from June 2015 through January 2017 at the Second Xiangya Hospital. The flap harvest and the methods for defect reconstruction are described, and the reconstructive efficacy is reported. RESULTS: Of the 15 patients, 12 were men, and 3 were women, with an average age of 49.5 years. Postoperatively, all flaps survived completely, without vascular compromise or major wound complications. All patients were followed for approximately 1 to 37 months, and they were satisfied with the esthetic and functional results of the recipient- and donor- sites after the reconstruction. CONCLUSIONS: Because of the reduced donor-site complications, satisfactory esthetic and functional results, and high success rate of flap transplantation, the use of suprafascially harvested ALT perforator flap is a good choice for the reconstruction of oral and maxillofacial defects, in cases in which the fascia lata is not needed.

Retrospective 3D analysis of bone regeneration after cystectomy of odontogenic cysts.

BACKGROUND/OBJECTIVE: In this retrospective study, we aimed to investigate a new 3D evaluation method for evaluating bone regeneration after cystectomy of odontogenic cysts. METHODS: The study included 26 patients who underwent cystectomies between 2012 and 2017 and had received either fillings or non-fillings with autologous iliac crest. Bony regeneration was analyzed using 3D imaging software and comparing identical regions of interest (ROIs) that were determined by exact overlays of the postoperative cone beam computer tomography (CBCT) or computer tomography (CT) images. Outcome measures, including volume changes according to the defect size and configuration, patient age, the entity and distribution of the cysts, were collected. RESULTS: Twenty-six patients (5 women and 21 men) had 30 defects, including nine keratocysts, seven radicular cysts and 14 dentigerous cysts. A total of 73% of the defects were in the mandible. The mean 3D follow-up time was 12 months. According to the 3D evaluation of bony regeneration, the defect size and configuration showed no significant differences between the groups (filled or non-filled with 15 defects per group). CONCLUSIONS: By establishing a standardized 3D method for evaluating bone regeneration, healing can be better monitored and evaluated.

Intracranial actinomycosis of odontogenic origin masquerading as auto-immune orbital myositis: a fatal case and review of the literature.

BACKGROUND: Actinomycetes can rarely cause intracranial infection and may cause a variety of complications. We describe a fatal case of intracranial and intra-orbital actinomycosis of odontogenic origin with a unique presentation and route of dissemination. Also, we provide a review of the current literature. CASE PRESENTATION: A 58-year-old man presented with diplopia and progressive pain behind his left eye. Six weeks earlier he had undergone a dental extraction, followed by clindamycin treatment for a presumed maxillary infection. The diplopia responded to steroids but recurred after cessation. The diplopia was thought to result from myositis of the left medial rectus muscle, possibly related to a defect in the lamina papyracea. During exploration there was no abnormal tissue for biopsy. The medial wall was reconstructed and the myositis responded again to steroids. Within weeks a myositis on the right side occurred, with CT evidence of muscle swelling. Several months later he presented with right hemiparesis and dysarthria. Despite treatment the patient deteriorated, developed extensive intracranial hemorrhage, and died. Autopsy showed bacterial aggregates suggestive of actinomycotic meningoencephalitis with septic thromboembolism. Retrospectively, imaging studies showed abnormalities in the left infratemporal fossa and skull base and bilateral cavernous sinus. CONCLUSIONS: In conclusion, intracranial actinomycosis is difficult to diagnose, with potentially fatal outcome. An accurate diagnosis can often only be established by means of histology and biopsy should be performed whenever feasible. This is the first report of actinomycotic orbital involvement of odontogenic origin, presenting initially as bilateral orbital myositis rather than as orbital abscess. Infection from the upper left jaw extended to the left infratemporal fossa, skull base and meninges and subsequently to the cavernous sinus and the orbits.

Surgical treatment of medication-related osteonecrosis of the upper jaw: Case series.

PURPOSE: The management of maxillary medication-related osteonecrosis of the jaw (MRONJ) is challenging. Therefore, identifying the proper treatment is important. This study aimed to evaluate the surgical treatment of maxillary MRONJ using single-layer closure with mucoperiosteal flap and double-layer closure with buccal fat pad flap (BFPF) and mucoperiosteal flap and to find the outcomes after rehabilitation with obturators. METHODS: A retrospective analysis was conducted and included all surgically treated and followed-up maxillary MRONJ cases in a single center. Demographics and clinical data, stage of MRONJ, surgical treatment, and treatment outcome were collected. RESULTS: Seventy-nine lesions were included. Removal of necrotic bone was followed by coverage with mucoperiosteal flap in 60 lesions and BFPF in 14 lesions. Seven lesions (five primarily and two following unsuccessful treatment with BFPF) underwent necrectomy and were reconstructed with obturators. Complete mucosal healing was achieved in 76.7% of the lesions covered with mucoperiosteal flap. BFPF led to complete mucosal healing in 85.7% of the lesions. No complications were observed in the defects rehabilitated with obturators. CONCLUSION: Removal of necrotic bone followed by closure with mucoperiosteal flap is reliable for MRONJ treatment. BFPF is effective for closure of MRONJ-related oroantral communications (OACs).

Oral ulceration with bone sequestration: Retrospective study of eight cases and literature review.

OBJECTIVE: Oral ulceration with bone sequestration (OUBS) describes a site-specific intraoral ulcer that covers exposed, non-vital bone in patients lacking any etiological factor known to induce osteonecrosis. We aimed to conduct a retrospective study of eight new cases of OUBS and review the literature. SUBJECTS AND METHODS: This is a retrospective study of OUBS cases, diagnosed and managed during 2007-2017. Inclusion criteria were the presence of oral ulcer with exposed non-vital bone at sites of bone prominence and the absence of any factor known to cause osteonecrosis. The English literature was reviewed on original OUBS cases. RESULTS: Eight patients (5 males and 3 females, aged 27-75 years) were diagnosed with OUBS during years 2007-2017. Four cases involved the mandibular mylohyoid ridge, one a mandibular anterior exostosis and three the maxillary buccal/palatal exostoses. Exposed bone was removed under local anesthesia, resulting in complete healing in all cases. The literature review yielded 32 OUBS cases in the mandible. CONCLUSION: Oral ulceration with bone sequestration is a distinct, probably under-reported rather than rare clinical entity that should be regarded the provisional diagnosis in case of an oral ulcer covering exposed, non-vital bone at sites of bone prominence in patients lacking any etiological factor known to induce osteonecrosis.

Streptococcus chosunense sp. nov., Isolated from Human Postoperative Maxillary Cyst.

A novel facultative anaerobic, non-spore forming, non-motile, and Gram-stain-positive coccus, designated strain ChDC B353T, was isolated from human postoperative maxillary cyst. The 16S ribosomal RNA gene (16S rDNA) sequence of the strain was most closely related to those of Streptococcus pseudopneumoniae ATCC BAA-960T (99.4%), Streptococcus mitis NCTC 12261T (99.3%), and Streptococcus pneumoniae NCTC 7465T (99.2%). The major fatty acids of the strain were C16:0 (43.2%) and C18:1 ω6c/C18:1 ω7c (20.2%). The genome of strain ChDC B353T was composed of 1,902,053 bps. The DNA G+C content of the strain was 40.2 mol%. Average nucleotide identity (ANI) values between strain ChDC B353T and S. pseudopneumoniae ATCC BAA-960T, S. mitis NCTC 12261T, and S. pneumoniae NCTC 7465T were 91.9%, 93.5%, and 91.3%, respectively. Genome-to-genome distance (GGD) values between strain ChDC B353T and S. pseudopneumoniae ATCC BAA-960T, S. mitis NCTC 12261T, or S. pneumoniae NCTC 7465T were 46.6% (44.0-49.2%), 53.2% (50.5-55.9%), and 46.0% (43.5-48.7%), respectively. The threshold values of ANI and GGD for species discrimination are 95-96% and 70%, respectively. These results reveal that strain ChDC B353T (= KCOM 1699T = JCM 33453T) is a novel species belonging to genus Streptococcus, for which a name of Streptococcus chosunense sp. nov. is proposed.

Minimally-Invasive Endoscopic-Assisted Sinus Augmentation.

OBJECTIVES: The purpose of this article is to evaluate endoscopic-assisted technique by lateral approach for sinus floor augmentation, to reduce the incidence of Schneiderian membrane perforation, and to guarantee a sufficient apposition of new bone even in the posterior maxillary sinus. METHODS: From January 2017 to December 2017, 10 patients affected by severe maxillary atrophy underwent endoscopic-assisted sinus augmentation using a lateral approach. RESULTS: In only 1 patient, a little perforation of sinus membrane was observed intraoperatively and it was repaired. No abnormal postoperative bleeding was observed. None of the patients experienced oro-antral fistula, infection, or V2 dysesthesia. The authors did not find radiologic evidences of biomaterial displaced on the maxillary sinus or postoperative sinusitis. CONCLUSIONS: The authors evaluated endoscopic-assisted maxillary sinus augmentation technique using a lateral approach that allows a direct and clear view of the surgical field. This technique, as the preliminary results demonstrate, is safe and helpful, especially in avoiding membrane perforation and in xenograft optimal distribution. It could be very useful in retreatment patients.

Predictability of Mandibular Autorotation After Le Fort I Maxillary Impaction in Case of Vertical Maxillary Excess.

A retrospective study of 20 patients treated for vertical maxillary excess between 2009 and 2010, solely by superior surgical repositioning of the maxilla. Clinical and radiological cephalometric parameters were analyzed statistically and their impact on achieving the predicted postoperative mandibular autorotation and on relapse. According to our study, patients presenting with an anterior open bite and a low occlusal plane angle might fail to achieve the predicted mandibular autorotation and are prone to postoperative relapse. No correlation was found between the extent of maxillary impaction and the presence of autorotation.