Incidence and risk factors of proximal junctional kyphosis after internal fixation for adult spinal deformity: a systematic evaluation and meta-analysis.

To investigate the factors associated with proximal junctional kyphosis (PJK). A systematic search was performed. The weighted mean difference (WMD) was pooled for continuous variables, and the odds ratio (OR) was calculated for dichotomous variables. The PJK group had higher values for age (WMD = 2.53, 95%CI = 1.38 ~ 3.68, P < 0.001), female gender (OR = 1.56, 95%CI = 1.29 ~ 1.87, P < 0.001), and diagnosed osteoporosis (OR = 1.58, 95%CI = 1.11 ~ 2.26, P = 0.01). Preoperatively, significant differences were detected in sagittal vertical axis (SVA) (WMD = 19.29, 95%CI = 16.60 ~ 21.98, P < 0.001), pelvic incidence minus lumbar lordosis (PI-LL) (WMD = 2.71, 95%CI = 0.25 ~ 5.18, P = 0.03), pelvic tilt (PT) (WMD = 2.64, 95%CI = 1.38 ~ 3.90, P < 0.001), lumbar lordosis (LL) (WMD = - 1.76, 95%CI = - 2.73 ~ -0.79, P < 0.001), and sacral slope (SS) (WMD = - 2.80, 95%CI = - 5.57 ~ -0.04, P = 0.001). At follow-up, the following were higher in the PJK group: thoracic kyphosis (TK) (WMD = 5.51, 95%CI = 2.23 ~ 8.80, P < 0.001), proximal junctional angle (PJA) (WMD = 9.07, 95%CI = 4.21 ~ 13.92, P < 0.001), and PT (WMD = 1.51, 95%CI = 0.31 ~ 2.72, P = 0.01). However, there was no significant difference in SS (P = 0.49), and SVA (P = 0.11) between groups. Fusion to S1 or pelvis significantly increased the risk of PJK (OR = 2.08, P < 0.001). Ligament augmentation reduced the risk of PJK (OR = 0.34, 95%CI = 0.21 ~ 0.53, P < 0.001) better than the use of laminar hook (OR = 0.46, P < 0.001). Although no difference was detected for preoperative SRS-22 score (P = 0.056), a lower score (WMD = - 0.24, 95%CI = - 0.35 ~ -0.14, P < 0.001) was detected in PJK group at follow-up. The elderly female ASD patients were more susceptible to PJK, especially for those with osteoporosis, high preoperative SVA, low LL, large PT, and LIV extended to pelvis. The use of laminar hook and ligament reinforcement at the proximal end might prevent PJK.

Lumbar disc height and vertebral Hounsfield units: association with interbody cage subsidence.

OBJECTIVE: Postoperative subsidence of transforaminal lumbar interbody fusion (TLIF) cages can result in loss of lordosis and foraminal height, and potential recurrence of nerve root impingement. The objectives of this study were to determine factors associated with TLIF cage subsidence. Specifically, the authors sought to determine if preoperative disc height compared to cage height could be used to predict TLIF interbody cage subsidence, and if decreased postoperative vertebral Hounsfield units (HUs) predisposed to cage subsidence. METHODS: The authors retrospectively reviewed all patients undergoing instrumented TLIF from two institutions between July 2004 and June 2014. The preoperative disc height was measured for the operative and adjacent-level disc on MRI. The difference between cage and disc heights was measured and compared between the subsidence and nonsubsidence groups. The average HUs of the L1 vertebral body were measured on CT scans. RESULTS: Eighty-nine patients were identified with complete imaging and follow-up information. Forty-five patients (50.6%) had evidence of interbody cage subsidence on follow-up CT. The average cage subsidence was 5.5 mm (range 2.2-10.8 mm). The average implant height was significantly higher in the subsidence group compared to the nonsubsidence group (12.6 vs 11.2 mm). Additionally, the difference between cage height and preoperative adjacent-level disc height was also significantly larger in the subsidence group (3.8 vs 1.2 mm). First lumbar vertebral body (L1) HUs were significantly higher in the nonsubsidence versus the subsidence group (167.8 vs 137.71 HUs, p = 0.002). Multivariate logistic regression analysis identified suprajacent disc height and L1 HUs to be independent predictors of interbody cage subsidence. Receiver operating characteristic curves identified a suprajacent to cage height difference > 1.3 mm to have a 93.3% sensitivity for cage subsidence. CONCLUSIONS: This study is the first of its kind to demonstrate the association between vertebral body HUs and suprajacent disc height with the development of interbody cage subsidence after TLIF. The authors found that patients with lower HUs in the L1 vertebral body were more likely to experience subsidence, regardless of surgical level. Additionally, the study demonstrated that interbody cage height > 1.3 mm above the height of the suprajacent level is an independent risk factor for cage subsidence, with 93.3% sensitivity. These findings suggest that these factors may be utilized to create a template preoperatively for intraoperative cage selection.

Does interbody cage lordosis impact actual segmental lordosis achieved in minimally invasive lumbar spine fusion?

OBJECTIVE: In an effort to prevent loss of segmental lordosis (SL) with minimally invasive interbody fusions, manufacturers have increased the amount of lordosis that is built into interbody cages. However, the relationship between cage lordotic angle and actual SL achieved intraoperatively remains unclear. The purpose of this study was to determine if the lordotic angle manufactured into an interbody cage impacts the change in SL during minimally invasive surgery (MIS) for lumbar interbody fusion (LIF) done for degenerative pathology. METHODS: The authors performed a retrospective review of a single-surgeon database of adult patients who underwent primary LIF between April 2017 and December 2018. Procedures were performed for 1-2-level lumbar degenerative disease using contemporary MIS techniques, including transforaminal LIF (TLIF), lateral LIF (LLIF), and anterior LIF (ALIF). Surgical levels were classified on lateral radiographs based on the cage lordotic angle (6°-8°, 10°-12°, and 15°-20°) and the position of the cage in the disc space (anterior vs posterior). Change in SL was the primary outcome of interest. Subgroup analyses of the cage lordotic angle within each surgical approach were also conducted. RESULTS: A total of 116 surgical levels in 98 patients were included. Surgical approaches included TLIF (56.1%), LLIF (32.7%), and ALIF (11.2%). There were no differences in SL gained by cage lordotic angle (2.7° SL gain with 6°-8° cages, 1.6° with 10°-12° cages, and 3.4° with 15°-20° cages, p = 0.581). Subgroup analysis of LLIF showed increased SL with 15° cages only (p = 0.002). The change in SL was highest after ALIF (average increase 9.8° in SL vs 1.8° in TLIF vs 1.8° in LLIF, p < 0.001). Anterior position of the cage in the disc space was also associated with a significantly greater gain in SL (4.2° vs -0.3°, p = 0.001), and was the only factor independently correlated with SL gain (p = 0.016). CONCLUSIONS: Compared with cage lordotic angle, cage position and approach play larger roles in the generation of SL in 1-2-level MIS for lumbar degenerative disease.

Comparison of outcomes according to fixation technique following the modified Ludloff osteotomy for hallux valgus in patients with rheumatoid arthritis.

BACKGROUND: Clinical and radiological outcomes including fixation stability of osteotomy site were compared in rheumatoid arthritis (RA) patients who underwent modified Ludloff osteotomy to correct hallux valgus with osteotomy site fixation using two screws versus those who underwent additional fixation using a plate. METHODS: The fixation technique performed with two screws was used to fix the osteotomy sites following modified Ludloff osteotomy in 15 patients (15 feet, Group S), while the augmented plate fixation technique was used in 14 patients (16 feet, Group P). Surgical outcomes were analysed using the American Orthopedic Foot and Ankle Society (AOFAS) scores, and radiologic parameters measured before surgery and during follow-up examinations. To evaluate the stability of each osteotomy site fixation technique, the 1-2 inter-metatarsal angle (IMA) and angle of the altered margin of the lateral cortex (AMLC) were measured immediately and 6 weeks after surgery, and variations in the angles were compared. In addition, bone mineral density (BMD) values were compared between patients with correction loss at the osteotomy site and those with no loss of correction. RESULTS: No significant differences between groups were found for total AOFAS scores before surgery and at the final follow-up. However, significant differences were observed in the 1-2 IMA, beginning at 6 weeks postoperatively and continuing through the final follow-up. The 1-2 IMA and angle of AMLC measured immediately after and 6 weeks after surgery showed significantly greater variation in Group S than in Group P. In Group S, patients with correction loss (5 feet) at osteotomy site showed significantly lower BMD values than those with no loss of correction (10 feet). Despite the lower BMD values of patients in Group P than in Group S, a loss of correction did not occur in these patients. CONCLUSIONS: Correction loss occurred at the osteotomy site within 6 weeks postoperatively in patients who underwent fixation using only the two-screw fixation technique following modified Ludloff osteotomy; such loss could be reduced using the augmented plate fixation technique even in patients with osteoporosis.

Surgical management of Charcot neuroarthropathy of the ankle and hindfoot in patients with diabetes.

BACKGROUND: Charcot neuroarthropathy (CN) of the ankle and hindfoot (Sanders/Frykberg Type IV) is challenging to treat surgically or nonsurgically. The deformities associated with ankle/hindfoot CN are often multiplanar, resulting in sagittal, frontal and rotational malalignment. In addition, shortening of the limb often occurs from collapse of the distal tibia, talus and calcaneus. These deformities also result in significant alterations in the biomechanics of the foot. For example, a varus ankle/hindfoot results in increased lateral column plantar pressure of the foot, predisposing the patient to lateral foot ulceration. Collapse of the talus, secondary to avascular necrosis or neuropathic fracture, further accentuates these deformities and contributes to a limb-length inequality. SURGICAL MANAGEMENT: The primary indication for surgical reconstruction is a nonbraceable deformity associated with instability. Other indications include impending ulceration, inability to heal an ulcer, recurrent ulcers, presence of osteomyelitis and/or significant pain. Arthrodesis of the ankle and/or hindfoot is the method of choice when surgically correcting CN deformities in this region. The choice of fixation (i.e. internal or external fixation) depends on largely on the presence or absence of active infection and bone quality. CONCLUSION: Surgical reconstruction of ankle and hindfoot CN is associated with a high rate of infectious and noninfectious complications. Despite this high complication rate, surgeons embarking on surgical reconstruction of ankle and hindfoot CN should strive for limb salvage rates approximating 90%. Preoperative measures that can improve outcomes include assessment of vascular status, optimization of glycemic control, correction of vitamin D deficiency and cessation of tobacco use.

Surgical treatment of the Charcot foot.

With the increased number of diabetics worldwide and the increased incidence of morbid obesity in more prosperous cultures, there has become an increased awareness of Charcot arthropathy of the foot and ankle. Outcome studies would suggest that patients with deformity associated with Charcot Foot arthropathy have impaired health related quality of life. This awareness has led reconstructive-minded foot and ankle surgeons to develop surgical strategies to treat these acquired deformities. This article outlines the current clinical approach to this disabling medical condition.

Press-fit fixation using autologous bone in the tibial canal causes less enlargement of bone tunnel diameter in ACL reconstruction--a CT scan analysis three months postoperatively.

BACKGROUND: Bone tunnel enlargement is a phenomenon present in all anterior cruciate ligament (ACL)- reconstruction techniques. It was hypothesized that press-fit fixation using a free autograft bone plug reduces the overall tunnel size in the tibial tunnel. METHODS: In a prospective cohort study twelve patients who underwent primary ACL reconstruction using an autologous quadriceps tendon graft and adding a free bone block for press-fit fixation (PF) in the tibial tunnel were matched to twelve patients who underwent ACL reconstruction with a hamstring graft and interference screw fixation (IF). The diameters of the bone tunnels were analysed by a multiplanar reconstruction technique (MPR) in a CT scan three months postoperatively. Manual and instrumental laxity (Lachman test, Pivot-shift test, Rolimeter) and functional outcome scores (International Knee Documentation Committee sore, Tegner activity level) were measured after one year follow up. RESULTS: In the PF group the mean bone tunnel diameter at the level of the joint entrance was not significantly enlarged. One and two centimeter distal to the bone tunnel diameter was reduced by 15% (p = .001). In the IF group the bone tunnel at the level of the joint entrance was enlarged by 14% (p = .001). One and two centimeter distal to the joint line the IF group showed a widening of the bone tunnel by 21% (p < .001) One and two centimeter below the joint line the bone tunnel was smaller in the PF group when compared to the IF group (p < .001). No significant difference for laxity test and functional outcome scores could be shown. CONCLUSION: This study demonstrates that press-fit fixation with free autologous bone plugs in the tibial tunnel results in significantly smaller diameter of the tibial tunnel compared to interference screw fixation.

Bone resorption during the first year after implantation of a single-segment dynamic interspinous stabilization device and its risk factors.

BACKGROUND: Dynamic interspinous stabilization devices generally provide satisfactory results, but can result in recurrent lumbar disc herniation, spinous process fracture, or bone resorption of the spinous process. The purpose of this study was to investigate if the Wallis dynamic stabilization device is associated with bone resorption. METHODS: Patients who underwent single-segment posterior lumbar decompression and implantation of a Wallis dynamic interspinous stabilization device at the L4/5 level between January 1, 2009 and October 1, 2011 were included. Bone resorption rate, Oswestry Disability Index (ODI), Japanese Orthopedic Association (JOA) score, and visual analogue scale (VAS) pain score were measured. Patient baseline and 1-year follow-up data were collected and analyzed. The bone resorption rate of the L4 and L5 spinous processes was calculated. RESULTS: Twenty four males and 20 females with a mean age of 42.7 ± 14.7 years were included. Twenty nine patients had significant bone resorption (bone resorption rate > 20%) and 15 had no bone resorption (bone resorption rate ≤ 20%) at 1 year after surgery. Lumbar lordosis ≥ 50° was associated with a lower bone resorption than lumbar lordosis < 50° and increasing BMI was associated with increased bone resorption. There were no significant differences between the bone resorption and no bone resorption groups in the improvement rate of VAS pain score, ODI, and JOA score at 1 year after surgery. CONCLUSIONS: Significant bone resorption occurs within 1 year after implantation of the Wallis device in more than 50% of patients. However, it does not affect short-term functional results.

Development of biodegradable polycaprolactone film as an internal fixation material to enhance tendon repair: an in vitro study.

BACKGROUND: Current tendon repair techniques do not provide sufficient tensile strength at the repair site, and thus early active motion rehabilitation after tendon repair is discouraged. To enhance the post-operative tensile strength, we proposed and tested an internal fixation technique using a polycaprolactone (PCL) biofilm. PCL was chosen for its good biocompatibility, excellent mechanical strength, and an appropriate degradation time scale. METHODS: PCL biofilms were prepared by a modified melt-molding/leaching technique, and the physical and mechanical properties and in vitro degradation rate were assessed. The pore size distribution of the biofilm and the paratenon of native tendons were observed using scanning electron microscopy. Next, we determined whether this biofilm could enhance the tensile strength of repaired tendons. We performed tensile tests on rabbit Achilles tendons that were first lacerated and then repaired: 1) using modified Kessler suture combined with running peripheral suture ('control' group), or 2) using biofilm to wrap the tendon and then fixation with sutures ('biofilm' group). The influence of different repair techniques on tendon tensile strength was evaluated by mechanical testing. RESULTS: The novel biofilm had supple texture and a smooth surface. The mean thickness of the biofilm was 0.25 mm. The mean porosity of the biofilm was 45.3%. The paratenon of the rabbit Achilles tendon had pores with diameters ranging from 1 to 9 µm, which were similar to the 4-12 µm diameter pores in the biofilm cross-section. The weight loss of the biofilms at 4 weeks was only 0.07%. The molecular weight of PCL biofilms did not change after immersion in phosphate buffered saline for 4 weeks. The failure loads of the biofilm were similar before (48 ± 9 N) and after immersion (47 ± 7 N, P > 0.1). The biofilm group had ~70% higher mean failure loads and 93% higher stiffness compared with the control group. CONCLUSIONS: We proposed and tested an internal fixation technique using a PCL biofilm to enhance tendon repair. Internal fixation with the biofilm followed by standard suturing can significantly increase the tensile strength of tendon repair sites. This technique has the potential to allow active motion rehabilitation during the early post-operative period.

Deep Learning Application in Spinal Implant Identification.

STUDY DESIGN: Retrospective observational study. OBJECTIVE: To demonstrate the clinical usefulness of deep learning by identifying previous spinal implants through application of deep learning. SUMMARY OF BACKGROUND DATA: Deep learning has recently been actively applied to medical images. However, despite many attempts to apply deep learning to medical images, the application has rarely been successful. We aimed to demonstrate the effectiveness and usefulness of deep learning in the medical field. The goal of this study was to demonstrate the clinical usefulness of deep learning by identifying previous spinal implants through application of deep learning. METHODS: For deep learning algorithm development, radiographs were retrospectively obtained from clinical cases in which the patients had lumbar spine one-segment instrument surgery. A total of 2894 lumbar spine anteroposterior (AP: 1446 cases) and lateral (1448 cases) radiographs were collected. Labeling work was conducted for five different implants. We conducted experiments using three deep learning algorithms. The traditional deep neural network model built by coding the transfer learning algorithm, Google AutoML, and Apple Create ML. Recall (sensitivity) and precision (specificity) were measured after training. RESULTS: Overall, each model performed well in identifying each pedicle screw implant. In conventional transfer learning, AP radiography showed 97.0% precision and 96.7% recall. Lateral radiography showed 98.7% precision and 98.2% recall. In Google AutoML, AP radiography showed 91.4% precision and 87.4% recall; lateral radiography showed 97.9% precision and 98.4% recall. In Apple Create ML, AP radiography showed 76.0% precision and 73.0% recall; lateral radiography showed 89.0% precision and 87.0% recall. In all deep learning algorithms, precision and recall were higher in lateral than in AP radiography. CONCLUSION: The deep learning application is effective for spinal implant identification. This demonstrates that clinicians can use ML-based deep learning applications to improve clinical practice and patient care.Level of Evidence: 3.

Determining the Difference in Clinical and Radiologic Outcomes Between Expandable and Nonexpandable Titanium Cages in Cervical Fusion Procedures: A Systematic Review and Meta-Analysis.

BACKGROUND: Expandable cages have been increasingly used in cervical and lumbar reconstructions; however, there is a paucity in the literature on how they compare with traditional nonexpandable cages in the cervical spine. We present a systematic review and meta-analysis, comparing the clinical and radiologic outcomes of expandable versus nonexpandable corpectomy cage use in the cervical spine. METHODS: A database search identified studies detailing the outcomes of expandable and nonexpandable titanium cage use in the cervical spine. These studies were screened using the PRISMA protocol. Fixed-effects and random-effects models were used with a 95% confidence interval. Two analyses were carried out for each outcome: one including all studies and the other including only studies reporting on exclusively 1-level and 2-level cases. RESULTS: Forty-one studies were included. The mean change in segmental lordosis was significantly greater in expandable cages (all, 6.72 vs. 3.69°, P < 0.001; 1-level and 2-level, 6.81° vs. 4.31°, P < 0.001). The mean change in cervical lordosis was also significantly greater in expandable cages (all, 5.71° vs. 3.11°, P = 0.027; 1-level and 2-level, 5.71° vs. 2.07°, P = 0.002). No significant difference was found between the complication rates (all, P = 0.43; 1-level and 2-level, P = 0.94); however, the proportion of revisions was significantly greater in expandable cages (all, 0.06 vs. 0.02, P = 0.03; 1-level and 2-level, 0.08 vs. 0.01, P = 0.017). CONCLUSIONS: The use of expandable cages may carry a modest improvement in radiologic outcomes compared with nonexpandable cages in the cervical spine; however, they may also lead to a higher rate of revisions based on our analyses.

Pseudarthrosis and Rod Fracture Rates After Transforaminal Lumbar Interbody Fusion at the Caudal Levels of Long Constructs for Adult Spinal Deformity Surgery.

BACKGROUND: Interbody fusion at the caudal levels of long constructs for adult spinal deformity (ASD) surgery is used to promote fusion and secure a solid foundation for maintenance of deformity correction. We sought to evaluate long-term pseudarthrosis, rod fracture, and revision rates for TLIF performed at the base of a long construct for ASD. METHODS: We reviewed 316 patients who underwent TLIF as a component of ASD surgery for medical comorbidities, surgical characteristics, and rate of unplanned reoperation for pseudarthrosis or instrumentation failure at the TLIF level. Fusion grading was assessed after revision surgery for pseudarthrosis at the TLIF level. RESULTS: Rate of pseudarthrosis at the TLIF level was 9.8% (31/316), and rate of rod fractures was 7.9% (25/316). The rate of revision surgery at the TLIF level was 8.9% (28/316), and surgery was performed at a mean of 20.4 ± 16 months from the index procedure. Current smoking status (odds ratio 3.34, P = 0.037) was predictive of pseudarthrosis at the TLIF site. At a mean follow-up of 43 ± 12 months after revision surgery, all patients had achieved bony union at the TLIF site. CONCLUSIONS: At 3-year follow-up, the rate of pseudarthrosis after TLIF performed at the base of a long fusion for ASD was 9.8%, and the rate of revision surgery to address pseudarthrosis and/or rod fracture was 8.9%. All patients were successfully treated with revision interbody fusion or posterior augmentation of the fusion mass, without need for further revision procedures at the TLIF level.

Clinical outcomes and safety of the SpineJack vertebral augmentation system for the treatment of vertebral compression fractures in a United States patient population.

The SpineJack implant system was recently FDA approved for treatment of vertebral compression fractures (VCF), however United States-based outcomes data is lacking. We sought to examine the safety and clinical outcomes following vertebral augmentation using the SpineJack implant for treatment of VCF in a U.S. patient population. An IRB-approved, retrospective study of SpineJack implants used in vertebral augmentation was performed from 11/2018 to 2/2020. Outcome objectives included pain improvement, vertebral body height (VH) restoration, improvement in local kyphotic angle (LKA), and incidence of adjacent level fractures (ALF). Complications were reviewed to assess safety of the procedure. Thirty patients with VCF (60% female; mean [SD] age of 62.7 [±12.8] years) underwent a total of 53 vertebral augmentations with 106 SpineJack implants. Worst pain scores decreased significantly from 8.7 to 4.3 (95%CI of the change [Δ]: 4.3-4.4; p < 0.001). Middle and anterior VH significantly increased from 13.1 ± 0.2 to 15.9 ± 0.2 mm (95%CI Δ: 2.6-2.9 mm; p < 0.001) and 15.6 ± 0.2 to 16.8 ± 0.2 mm (95%CI Δ: 1.1-1.4 mm; p < 0.001), respectively. LKA was significantly decreased from 10.0 ± 2.1 to 7.4 ± 2.1 degrees (95%CI Δ: 2.4-2.8 degrees; p < 0.001). Four patients (13%) sustained ten ALF over a median (IQR) follow up period of 94 (17.5-203) days. There were no major adverse events during the follow up period. To summarize, vertebral augmentation with SpineJack implants of patients with VCF resulted in significantly decreased pain, restored VH, and improved LKA, without major adverse events. However, 13% of patients sustained ALF during a median follow up period of 3 months.

Image-guided spine surgery: state of the art and future directions.

Navigation technology is a widely available tool in spine surgery and has become a part of clinical routine in many centers. The issue of where and when navigation technology should be used is still an issue of debate. It is the aim of this study to give an overview on the current knowledge concerning the technical capabilities of image-guided approaches and to discuss possible future directions of research and implementation of this technique. Based on a Medline search total of 1,462 publications published until October 2008 were retrieved. The abstracts were scanned manually for relevance to the topics of navigated spine surgery in the cervical spine, the thoracic spine, the lumbar spine, as well as ventral spine surgery, radiation exposure, tumor surgery and cost-effectivity in navigated spine surgery. Papers not contributing to these subjects were deleted resulting in 276 papers that were included in the analysis. Image-guided approaches have been investigated and partially implemented into clinical routine in virtually any field of spine surgery. However, the data available is mostly limited to small clinical series, case reports or retrospective studies. Only two RCTs and one metaanalysis have been retrieved. Concerning the most popular application of image-guided approaches, pedicle screw insertion, the evidence of clinical benefit in the most critical areas, e.g. the thoracic spine, is still lacking. In many other areas of spine surgery, e.g. ventral spine surgery or tumor surgery, image-guided approaches are still in an experimental stage. The technical development of image-guided techniques has reached a high level as the accuracies that can be achieved technically meet the anatomical demands. However, there is evidence that the interaction between the surgeon ('human factor') and the navigation system is a source of inaccuracy. It is concluded that more effort needs to be spend to understand this interaction.

Percutaneous posterior-lateral lumbar interbody fusion for degenerative disc disease using a B-Twin expandable spinal spacer.

Degenerative disc disease (DDD) causes gradual intervertebral space collapse, concurrent discogenic or facet-induced pain, and possible compression radiculopathy. A new minimal invasion procedure of percutaneous posterior-lateral lumbar interbody fusion (PPLIF) using a B-Twin stand-alone expandable spinal spacer (ESS) was designed to treat this disease and evaluated by follow-up more than 1 year. 12 cases with chronic low back pain and compressive radiculopathy due to DDD refractory were selected to conservative treatment. Under fluoroscopy in the posterior-lateral position, a K-wire was advanced into the intervertebral space and a dilator and working cannula were introduced into the disc space step by step. Discectomy and endplate scratching were performed through the cannula using pituitary forceps and endplate curettage. An ESS was inserted into the intervertebral space by a B-Twin expandable spinal delivery system after some bone graft chips implanted into the disc space. The ongoing study includes intraoperative difficulties, complications, radiologic evidence of fusion and clinical outcome as scored by pre- and postoperative questionnaires pertaining to pain intensity and degree of disability. The 12 procedures of lumbar interbody fusion using stand-alone expandable spinal system through percutaneous approach were successful. Radiologic study demonstrated fusion in a total of 11 cases and only 1 exception after more than 1 year visiting. The values of Visual Analog Scale (VAS) on movement and Oswestry Disability Index (ODI) dropped by more than 80 and 67.4%, respectively. Disk space heights averaging 9.0 mm before procedure were increased to 11.5 mm 1 month (a significant difference compared with preprocedure, P < 0.01) after surgery and stabilized at 10.8 mm upon final follow-up (a significant difference compared with preprocedure, P < 0.01). The results demonstrated that the percutaneous approach for posterior-lateral lumbar interbody fusion using expandable spinal system is a valuable micro-invasion method for the DDD patients and can achieve the same outcome as with other methods.

Treatment of distal humeral fractures using conventional implants. Biomechanical evaluation of a new implant configuration.

BACKGROUND: In the face of costly fixation hardware with varying performance for treatment of distal humeral fractures, a novel technique (U-Frame) is proposed using conventional implants in a 180 degrees plate arrangement. In this in-vitro study the biomechanical stability of this method was compared with the established technique which utilizes angular stable locking compression plates (LCP) in a 90 degrees configuration. METHODS: An unstable distal 3-part fracture (AO 13-C2.3) was created in eight pairs of human cadaveric humeri. All bone pairs were operated with either the "Frame" technique, where two parallel plates are distally interconnected, or with the LCP technique. The specimens were cyclically loaded in simulated flexion and extension of the arm until failure of the construct occurred. Motion of all fragments was tracked by means of optical motion capturing. Construct stiffness and cycles to failure were identified for all specimens. RESULTS: Compared to the LCP constructs, the "Frame" technique revealed significant higher construct stiffness in extension of the arm (P = 0.01). The stiffness in flexion was not significantly different (P = 0.16). Number of cycles to failure was found significantly larger for the "Frame" technique (P = 0.01). CONCLUSIONS: In an in-vitro context the proposed method offers enhanced biomechanical stability and at the same time significantly reduces implant costs.

2D-fluoroscopic navigated percutaneous screw fixation of pelvic ring injuries--a case series.

BACKGROUND: Screw fixation of pelvic ring fractures is a common, but demanding procedure and navigation techniques were introduced to increase the precision of screw placement. The purpose of this case series was the evaluation of screw misplacement rate and functional outcome of percutaneous screw fixation of pelvic ring disruptions using a 2D navigation system. METHODS: Between August 2004 and December 2007, 44 of 442 patients with pelvic injuries were included for closed reduction and percutaneous screw fixation of disrupted pelvic ring lesions using an optoelectronic 2D-fluoroscopic based navigation system. Operating and fluoroscopy time were measured, as well as peri- and postoperative complications documented. Screw position was assessed by postoperative CT scans. Quality of live was evaluated by SF 36-questionnaire in 40 of 44 patients at mean follow up 15.5 +/- 1.2 month. RESULTS: 56 iliosacral- and 29 ramus pubic-screws were inserted (mean operation time per screw 62 +/- 4 minutes, mean fluoroscopy time per screw 123 +/- 12 seconds). In post-operative CT-scans the screw position was assessed and graded as follows: I. secure positioning, completely in the cancellous bone (80%); II. secure positioning, but contacting cortical bone structures (14%); III. malplaced positioning, penetrating the cortical bone (6%). The malplacements predominantly occurred in bilateral overlapping screw fixation. No wound infection or iatrogenic neurovascular damage were observed. Four re-operations were performed, two of them due to implant-misplacement and two of them due to implant-failure. CONCLUSION: 2D-fluoroscopic navigation is a safe tool providing high accuracy of percutaneous screw placement for pelvic ring fractures, but in cases of a bilateral iliosacral screw fixation an increased risk for screw misplacement was observed. If additional ramus pubic screw fixations are performed, the retrograde inserted screws have to pass the iliopubic eminence to prevent an axial screw loosening.

A hollow cylindrical PMMA strut for cervical spine reconstruction after cervical multilevel corpectomy.

STUDY DESIGN: Between January 2002 and December 2005, a prospective study was performed with 14 patients. The patients had cervical diseases and received more than 1 segment anterior cervical corpectomies. OBJECTIVES: We investigated the effectiveness of the hollow cylindrical polymethyl methacrylate (PMMA) strut with the autograft for fusion and reconstruction of the cervical spine after multiplelevel cervical corpectomy. SUMMARY OF BACKGROUND DATA: We usually used the titanium mesh cage to reconstruct the cervical spine after cervical corpectomy. A significant number of poor outcomes were noted. Because the mesh cage is very hard, it sinks into the vertebral body without the cortex. It is also difficulty to assess the fusion status. METHODS: A total of 14 patients (age range: 31 to 76 y) underwent anterior cervical corpectomy after fusion and reconstruction with cylindrical PMMA struts. Each patient was reinforced with anterior cervical plate fixation. Follow-up radiographic evaluation was comprised of plain lateral dynamic radiographs and computerized tomography (CT) scans. We evaluated the patients for cervical lordosis and vertebral body height on the basis of plain radiographs. The fusion status was evaluated with CT scans. Neurologic status was assessed preoperative and postoperatively using the Nurick's grading system. RESULTS: : The mean follow-up was 48.2 months (range: 28 to 70 mo). All patients showed spinal stability at 6 months follow-up on the basis of plain lateral dynamic radiograph results. Thirteen patients showed neurologic improvement with complete bony fusion in the 24-month reconstructed CT scans. There were no complications related to the hollow cylindrical PMMA strut. One patient had loosened screws and required a second operation. CONCLUSIONS: The cylindrical PMMA strut provides solid fusion and increased cervical lordosis and vertebral body height. There are few complications associated with the use of this strut, and neurologic recovery is satisfactory. The hollow cylindrical PMMA strut, combined with an anterior cervical plate, is a very successful surgical construct in these patients after long-segmental cervical corpectomy.

Successful treatment of thoracolumbar fractures with short-segment pedicle instrumentation.

STUDY DESIGN: Retrospective radiographic review. OBJECTIVE: To determine whether clinical factors or common classification systems can predict the radiologic outcome of short-segment thoracolumbar fracture fixation. SUMMARY OF BACKGROUND DATA: Previous reports have indicated that short-segment thoracolumbar fracture fixation might not be appropriate for highly comminuted fractures or for patients with multiple traumatic injuries. METHODS: We conducted a retrospective radiographic review of 46 thoracolumbar fractures treated with short-segment posterior instrumentation to determine the rate of correction loss and instrumentation failure in relation to the Load Sharing Classification of Spine Fracture system and the AO Classification of Fractures system. No postoperative bracing was used. Patients with multisystem organ trauma and those with isolated injuries were included. RESULTS: An average loss of correction of 7.5 degree was observed. Pedicle screw placement into the fractured vertebra seemed to protect against correction loss: 4 of the 7 patients (57%) in the no intermediate fixation group had >10 degree loss of correction. No relationship was shown between loss of correction and Load Sharing Classification (< or = 6 or > or = 7 points), loss of correction and AO Classification, or loss of correction and level of injury (thoracolumbar junction vs. lower lumbar). CONCLUSIONS: With modern instrumentation and techniques, short-segment thoracolumbar fracture fixation could be used successfully, despite highly comminuted injuries, without anterior column support or supplemental bracing.

Decompression and interspinous dynamic stabilization using the locker for lumbar canal stenosis associated with low-grade degenerative spondylolisthesis.

BACKGROUND: Decompression and spinal fusion have been generally recommended for spinal stenosis associated with low-grade degenerative spondylolisthesis (DS), although this is still controversial. The purpose of the present study is to analyze the clinical and radiological outcomes of interspinous dynamic stabilization using the Locker (WINNOVA co, Seoul, Korea) for lumbar canal stenosis with grade I DS. METHODS: The authors performed a retrospective review of 23 consecutive patients who underwent single level decompression and the Locker application for lumbar canal stenosis with grade I DS and were followed up for at least 2 years. Excluded were those with DS grade II or higher and DS combined with foraminal disc herniation/stenosis. The mean age of patients at the time of surgery was 62.1 years (range: 45-81 years). RESULTS: There were no complications in the perioperative period. At a mean follow-up duration of 28.3 months (range: 24-32 months), visual analogue scale scores for back pain, leg pain, and Oswestry disability index had decreased significantly; from 4.6, 7.2, and 38.5% to 2.4, 2.6, and 15.3%, respectively. Clinical success was achieved in 87% of the patients. The mean percentage of slippage did not change significantly. The mean sagittal rotation angle significantly decreased from 9.7 to 6.5 degrees (p=0.01). One patient (4.3%) underwent secondary fusion surgery due to persistent pain. CONCLUSIONS: Decompression and interspinous dynamic stabilization using the Locker yielded favorable clinical and radiological outcomes for lumbar canal stenosis with grade I DS and could be an alternative for spinal fusion. However, further long-term follow-up studies are necessary.