Experimental Analysis of Robotic Cortical Bone Specimen Drilling Performance: Effect of Cryogen.

In orthopedic surgery, precise bone screw insertion is crucial for stabilizing fractures, necessitating a preliminary cortical bone drilling procedure. However, this process can induce temperatures exceeding 70 °C due to the low thermal conductivity of cortical bone, potentially leading to thermal osteonecrosis. Furthermore, significant cutting forces and torque pose risks of tool breakage and bone damage, underlining the need for high precision and optimal processing parameters. Traditionally, drilling relies on the surgeon's experience and often results in imprecise outcomes due to inconsistent feed rates. Therefore, this study proposes the use of a 6-axis robot for controlled drilling, offering precise control over angular velocities and consistent feed rates. Additionally, explore the use of cryogenic liquid nitrogen (LN2) as a novel cooling method compared to conventional saline solutions, examining its efficacy under various cutting conditions. The results demonstrate that LN2 cooling conditions lead to a reduction in thrust and torque under specific processing conditions, and facilitate smoother chip evacuation. Additionally, LN2 significantly lowers the peak temperature around the drilling site, thus minimizing the risk of thermal osteonecrosis. Consequently, the use of a 6-axis robot provides consistent feed rates, and LN2 cooling achieves optimal processing conditions, enabling a more controlled and effective drilling process.

Acromioclavicular joint dislocation with loop double endobutton fixation assisted by orthopaedic surgery robot positioning system.

OBJECTIVE: Acute acromioclavicular (AC) joint dislocation is a common orthopedic injury that can significantly impair shoulder function and reduce quality of life. Effective treatment methods are essential to restore function and alleviate pain. To investigate the short-term clinical efficacy of the minimally invasive closed-loop double endobutton fixation assisted by orthopaedic surgery robot positioning system (TiRobot) in the treatment of AC joint dislocation, and to evaluate its feasibility and safety. METHODS: The clinical data of 19 patients with AC joint dislocation who underwent treatment with closed-loop double Endobutton fixation assisted by TiRobot between May 2020 and December 2022 were retrospectively analyzed. Visual Analog Scale (VAS) pain scores, the Constant Murley Score (CMS), and shoulder abduction range of motion were assessed and compared preoperatively and at the last follow-up. Computed tomography (CT) parameters of the acromioclavicular joint, including acromioclavicular distance (ACD), the distance between the upper and lower Endobutton (DED), the horizontal distance between the anterior edge of the distal clavicle and the anterior edge of the acromion (DACC), the diameter of the clavicular tunnel (DCT), and coracoid tunnel diameter (DC), were compared at 2 days, and 1 month after surgery, as well as at the last follow-up, along with the evaluation of intraoperative and postoperative complications. RESULTS: The postoperative VAS, CMS, and shoulder-abduction range of motion were significantly improved compared with the preoperative (all, P<0.05). The statistical analysis showed no significant difference in the CT image parameters of the acromioclavicular joint at 2 days and 1 month after surgery(all, P>0.05). Comparisons of DCT and DC revealed statistically significant differences between the last follow-up and 1 month after surgery (P<0.05), and no statistically significant difference was found in ACD, DED, and DACC(all, P>0.05). There were no complications such as infection or vascular or neurological damage, no cases of rostral or clavicle fractures, loss of reduction, heterotopic ossification, shoulder stiffness, and no loosening or breaking of internal fixations. CONCLUSION: Closed-loop double endobutton internal fixation assisted by TiRobot is an ideal method for the treatment of acute acromioclavicular (AC) joint dislocation. This method has the advantages of relatively simple operation, more accurate localization of bone tunnel during operation, less surgical trauma, and good recovery of shoulder function.

Ex-vivo parametric study of laser ablation-based drilling of cortical bone.

Frequently orthopedic surgeries require mechanical drilling processes especially for inserted biodegradable screws or removing small bone lesions. However mechanical drilling techniques induce large number of forces as well as have substantially lower material removal rates resulting in prolong healing times. This study focuses on analyzing the impact of quasi-continuous laser drilling on the bone's surface as well as optimizing the drilling conditions to achieve high material removal rates. An ex-vivo study was conducted on the cortical region of desiccated bovine bone. The laser-based drilling on the bovine bine specimens was conducted in an argon atmosphere using a number of laser pulses ranging from 100 to 15,000. The morphology of the resulting laser drilled cavities was characterized using Energy dispersive Spectroscopy (EDS) and the width and depth of the drills were measured using a laser based Profilometer. Data from the profilometer was then used to calculate material removal rates. At last, the material removal rates and laser processing parameters were used to develop a statistical model based on Design of Experiments (DOE) approach to predict the optimal laser drilling parameters. The main outcome of the study based on the laser drilled cavities was that as the number of laser pulses increases, the depth and diameter of the cavities progressively increase. However, the material removal rates revealed a decrease in value at a point between 4000 and 6000 laser pulses. Therefore, based on the sequential sum of square method, a polynomial curve to the 6th power was fit to the experimental data. The predicted equation of the curve had a p-value of 0.0010 indicating statistical significance and predicted the maximum material removal rate to be 32.10 mm3/s with 95%CI [28.3,35.9] which was associated with the optimum number of laser pulses of 4820. Whereas the experimental verification of bone drilling with 4820 laser pulses yielded a material removal rate of 33.37 mm3/s. Therefore, this study found that the carbonized layer formed due to laser processing had a decreased carbon content and helped in increasing the material removal rate. Then using the experimental data, a polymetric equation to the sixth power was developed which predicted the optimized material removal rate to occur at 4820 pulses.

Surgical Scissors: The Core Surgical Instrument.

Surgical scissors form an essential part of both basic and specialty surgical sets. Their prime function is to cut tissues. They are also used for blunt dissection/development of tissue planes and piercing tissues. A wide variety of scissors are available for use in practice. This review article briefly describes common surgical scissors in orthopaedic use. The basic construct, biomechanics, types, their identification, specific uses, and care aspects are also discussed. A surgeon should be aware of the different types of scissors, their biomechanical features, and specific uses, as they are an important tool in his/her armamentarium. (Journal of Surgical Orthopaedic Advances 33(1):001-004, 2024).

Review of mechanisms of expandable spine surgery devices.

INTRODUCTION: Expandable devices such as interbody cages, vertebral body reconstruction cages, and intravertebral body expansion devices are frequently utilized in spine surgery. Since the introduction of expandable implants in the early 2000s, the variety of mechanisms that drive expansion and implant materials have steadily increased. By examining expandable devices that have achieved commercial success and exploring emerging innovations, we aim to offer an in-depth evaluation of the different types of expandable cages used in spine surgery and the underlying mechanisms that drive their functionality. AREAS COVERED: We performed a review of expandable spinal implants and devices by querying the National Library of Medicine MEDLINE database and Google Patents database from 1933 to 2024. Five major types of mechanical jacks that drive expansion were identified: scissor, pneumatic, screw, ratchet, and insertion-expansion. EXPERT OPINION: We identified a trend of screw jack mechanism being the predominant machinery in vertebral body reconstruction cages and scissor jack mechanism predominating in interbody cages. Pneumatic jacks were most commonly found in kyphoplasty devices. Critically reviewing the mechanisms of expansion and identifying trends among effective and successful cages allows both surgeons and medical device companies to properly identify future areas of development.

Design and performance analysis of low damage anti-skid crescent drills for bone drilling.

BACKGROUND: With orthopedic surgery increasing year on year, the main challenges in bone drilling are thermal damage, mechanical damage, and drill skid. The need for new orthopedic drills that improve the quality of surgery is becoming more and more urgent. METHODS: Here, we report the skidding mechanism of drills at a wide range of inclination angle and propose two crescent drills (CDTI and CDTII). The anti-skid performance and drilling damage of the crescent drills were analyzed for the first time. Inclined bone drilling experiments were carried out with crescent drills and twist drills and real-time drilling forces and temperatures were collected. RESULTS: The crescent drills are significantly better than the twist drill in terms of anti-skid, reducing skidding forces, thrust forces and temperature. The highest temperature is generated close to the upper surface of the workpiece rather than at the hole exit. Finally, the longer crescent edge with a small and negative polar angle increases the rake angle of the cutting edge and reduces thrust forces but increases skidding force and temperature. This study can promote the development of high-quality orthopedic surgery and the development of new bone drilling tools. CONCLUSION: The crescent drills did not skid and caused little drilling damage. In comparison, the CDTI performs better in reducing the skidding force, while the CDTII performs better in reducing the thrust force.

Thermographic analysis of perforations in polyurethane blocks performed with experimental conical drill bit in comparison to conventional orthopedic drill bit: a preliminary study.

OBJECTIVE: Conical orthopedic drill bits may have the potential to improve the stabilization of orthopedic screws. During perforations, heat energy is released, and elevated temperatures could be related to thermal osteonecrosis. This study was designed to evaluate the thermal behavior of an experimental conical drill bit, when compared to the conventional cylindrical drill, using polyurethane blocks perforations. RESULTS: The sample was divided into two groups, according to the method of drilling, including 25 polyurethane blocks in each: In Group 1, perforations were performed with a conventional orthopedic cylindrical drill; while in Group 2, an experimental conical drill was used. No statistically significant difference was observed in relation to the maximum temperature (MT) during the entire drilling in the groups, however the perforation time (PT) was slightly longer in Group 2. Each drill bit perforated five times and number of perforations was not correlated with a temperature increase, when evaluated universally or isolated by groups. The PT had no correlation with an increase in temperature when evaluating the perforations universally (n = 50) and in Group 1 alone; however, Group 2 showed an inversely proportional correlation for these variables, indicating that, for the conical drill bit, drillings with longer PT had lower MT.

Influence of different position modal parameters on milling chatter stability of orthopedic surgery robots.

This research is dedicated to exploring the dynamics of milling chatter stability in orthopedic surgery robots, focusing on the impact of position modal parameters on chatter stability. Initially, we develop a dynamic milling force model for the robotic milling process that integrates both modal coupling and regenerative effects. We then employ the zero-order frequency domain method to derive a chatter stability domain model, visually represented through stability lobe diagrams (SLDs). Through conducting hammer test experiments, we ascertain the robot's modal parameters at varying positions, enabling the precise generation of SLDs. This study also includes experimental validation of the chatter SLD analysis method, laying the groundwork for further examination of chatter stability across different positional modal parameters. Finally, our analysis of the variations in modal parameters on the stability of robot milling chatter yields a theoretical framework for optimizing cutting parameters and developing control strategies within the context of orthopedic surgery robots.

Development and Validation of a Low-Cost Drilling Model.

Background: Simulation models enable learners to have repeated practise at their own time, to master the psycho-motor and sensory acuity aspects of surgery and build their confidence in the procedure. The study aims to develop and evaluate the feasibility of a low-cost drilling model to train surgeons in the drilling task. The model targets three aspects of drilling - (1) Reduce plunge depth, (2) Ability to differentiate between bone and medullary canal and (3) Increase accuracy drilling in various angles. Methods: This cross-sectional study was conducted after obtaining ethics approval. We invited Consultants in the field of Orthopaedic or Hand Surgery to form the 'expert' group, and the 'novice' group consisted of participants who had no prior experience in bone drilling. We developed a drilling simulator model made from a polyvinyl chloride (PVC) pipe filled with liquid silicone. This model cost less than US$5. An electric Bosch drill (model GBM 10 RE) with a 1.4 mm K-wire 10 cm in length (6.5 cm outside the drill) was used for drilling. The main outcomes of the study were time taken for drilling, plunge depth, ability to penetrate the far cortex and accuracy. Results: Thirty-one participants were recruited into the study, of which 15 were experts and 16 were novices. The experts performed significantly better for plunge depth (t = -3.65, p = 0.0003) and accuracy (t = -2.07, p = 0.04). The experts required 20% less time to complete the drilling tasks, but it was not statistically significant (t = -0.79, p = 0.43). Conclusions: The low-cost drilling model could be useful in training Residents in the drilling task. It will allow Residents to practise independently at their own time and assess their own performance.

Robot-assisted retractor in spine surgery: Preliminary evaluation of its feasibility and two operation mode in beagles.

OBJECTIVE: To assess the feasibility of the robot-assisted retractor. To compare the muscle injury of the two operation modes, intermittent retraction mode and continuous retraction mode in the robot-assisted retractor to find a better robot operation mode. METHODS: A new robot-assisted retractor experimental platform was developed. Three incisions were made on the backs of three beagles. The robot-assisted retractor was used to retract the muscle on both sides of the incisions in intermittent retraction mode and continuous retraction mode, and the operation of the robot system was observed. The muscle samples were stained with hematoxylin-eosin (HE) to observe the muscle injury. The difference between the muscle injuries of the two groups was statistically compared using paired t test. RESULTS: The robot-assisted retractor can precisely retract to the specified position without malfunction or dangerous actions. Histologic evaluation showed that fewer muscle injury was found in the intermittent retraction mode group of the robot-assisted retractor compared to the continuous retraction mode group. CONCLUSION: The robot-assisted retractor offers a certain degree of feasibility and safety. The robot-assisted retractor is able to effectively reduce muscle injury with the intermittent retraction mode.

Does Reusable Instrumentation for Four-Anchor Rotator Cuff Repair Offer Decreased Waste Disposal Costs and Lower Waste-Related Carbon Emissions?

INTRODUCTION: Orthopaedic surgery is culpable, in part, for the excessive carbon emissions in health care partly due to the utilization of disposable instrumentation in most procedures, such as rotator cuff repair (RCR). To address growing concerns about hospital waste, some have considered replacing disposable instrumentation with reusable instrumentation. The purpose of this study was to estimate the cost and carbon footprint of waste disposal of RCR kits that use disposable instrumentation compared with reusable instrumentation. METHODS: The mass of the necessary materials and their packaging to complete a four-anchor RCR from four medical device companies that use disposable instrumentation and one that uses reusable instrumentation were recorded. Using the cost of medical waste disposal at our institution ($0.14 per kilogram) and reported values from the literature for carbon emissions produced from the low-temperature incineration of noninfectious waste (249 kgCO 2 e/t) and infectious waste (569 kgCO 2 e/t), we estimated the waste management cost and carbon footprint of waste disposal produced per RCR kit. RESULTS: The disposable systems of four commercial medical device companies had 783%, 570%, 1,051%, and 478%, respectively, greater mass and waste costs when compared with the reusable system. The cost of waste disposal for the reusable instrumentation system costs on average $0.14 less than the disposable instrumentation systems. The estimated contribution to the overall carbon footprint produced from the disposal of a RCR kit that uses reusable instrumentation was on average 0.37 kg CO2e less than the disposable instrumentation systems. CONCLUSION: According to our analysis, reusable instrumentation in four-anchor RCR leads to decreased waste and waste disposal costs and lower carbon emissions from waste disposal. Additional research should be done to assess the net benefit reusable systems may have on hospitals and the effect this may have on a long-term decrease in carbon footprint. LEVEL OF EVIDENCE: Level II.

Screening complications in the postoperative period of orthopedic surgeries by video arthroscopy

To analyze the prevalence and characteristics of late postoperative complications of orthopedic surgeries by video arthroscopy.This was a descriptive cross-sectional study that evaluated, through its own instrument, local and systemic postoperative complications of patients undergoing orthopedic surgeries by video arthroscopy. The study included 270 patients, who were evaluated on days 30(without prosthesis) and 90(with prosthesis placement) of the postoperative period, by telephone service. The selection of participants occurred sequentially and population-based, within the data collection period, from February to July 2020, in a large hospital for medium and high complexity surgeries. Of the 270 procedures performed in the period, 4.4% (n = 12) presented late postoperative infection. The most frequent complications were erythema (83%), edema (75%) and secretion (67%) in the surgical wound. Most used antibiotic therapy (92%) and anti-inflammatory drugs (67%). Hospital readmission was not necessary concerning the complications. Only 50% required medical evaluation before the scheduled time.The need for practices that ensure the quality of perioperative care and improve the active search to assess surgical outcomes is reinforced.

Avaliação ortopédica e ultrassonográfica da estabilidade dos quadris de recém-nascidos encaminhados por pediatras, com suspeita de Displasia Típica do Desenvolvimento / Orthopedic and ultrasound assessment of hip stability of newborns referred by pediatricians with suspected Developmental Dysplasia

RESUMO Objetivo: avaliar recém-nascidos com suspeita de instabilidade do quadril, encaminhados por pediatras a um serviço ortopédico terciário. Métodos: recém-nascidos de uma maternidade pública universitária, com suspeita de instabilidade ou fatores de risco para displasia do quadril, eram encaminhados ao Departamento de Ortopedia e Anestesiologia, Ribeirão Preto/SP, onde eram avaliados clinicamente e através de exames ultrassonográficos dos quadris. Constatada a displasia, iniciava-se o tratamento, e em casos em que havia apenas imaturidade do quadril e exame clínico normal, procedia-se à observação e re-exame clinico e ultrassonográfico com dois ou três meses de vida. Resultados: foram examinados 448 recém-nascidos, com predominância feminina e média de idade na primeira avaliação de 27 dias. A principal causa do encaminhamento foi apresentação pélvica. Em 8% havia sinal de Ortolani positivo e em 12,5% estalido no quadril. No exame ortopédico, 405 (90,5%) pacientes eram normais, 8,5% apresentavam estalido no quadril e 1,1% apresentavam teste de Ortolani positivo. À ultrassonografia, 368 (89,5%) apresentavam imaturidade, 26 (6,3%) tinham displasia moderada e em 17 (4,1%) pacientes os quadris eram francamente displásicos. Todos os casos com sinal de Ortolani positivo apresentavam quadro ultrassonográfico de displasia. Conclusão: houve excesso de diagnóstico de instabilidade do quadril na avaliação do pediatra, o que, no entanto, permitiu ao paciente uma segunda avaliação, em ambiente mais especializado e com mais recursos tecnológicos.

ABSTRACT Objective: to evaluate newborns with suspected hip instability, referred by pediatricians to a tertiary orthopedic service. Methods: newborns from a public university maternity hospital, with suspected instability or risk factors for hip dysplasia, were referred to the Department of Orthopedics and Anesthesiology, Ribeirão Preto/SP, where we evaluated them clinically and through ultrasound examinations of the hips. Once we found dysplasia, we initiated treatment, and in cases in which there was only hip immaturity and normal clinical examination, we performed clinical and ultrasound observation and review at two or three months of age. Results: we examined 448 newborns, with female predominance and average age at first evaluation of 27 days. The main cause of referral was pelvic presentation at delivery. In 8% there was a positive Ortolani sign and in 12.5%,. At orthopedic examination, 405 (90.5%) patients were normal, 8.5% had hip click and 1.1% had positive Ortolani test. At ultrasound, 368 (89.5%) had immaturity, 26 (6.3%) had moderate dysplasia and in 17 (4.1%) patients the hips were frankly dysplastic. All cases with positive Ortolani sign showed dysplasia at ultrasound. Conclusion: there was an excess diagnosis of hip instability in the pediatrician evaluation, which, however, allowed the patient a second assessment, in a more specialized environment and with more technological resources.

Foot drop: an iatrogenic complication of spinal anesthesia / Pé caído: uma complicação iatrogênica da anestesia espinhal

Abstract Background and objectives Foot drop in postoperative period is very rare after spinal anesthesia. Early clinical assessment and diagnostic interventions is of prime importance to establish the etiology and to start appropriate management. Close follow-up is warranted in early postoperative period in cases when patient complain paresthesia or pain during needle insertion or drug injection. Case report A 22-year-old male was undergone lower limb orthopedic surgery in spinal anesthesia. During shifting from postoperative ward footdrop was suspected during routine assessment of regression of spinal level. Immediately the patient was referred to a neurologist and magnetic resonance imaging was done, which was inconclusive. Conservative management was started and nerve conduction study was done on the 4th postoperative day that confirmed pure motor neuropathy of right peroneal nerve. Patient was discharged with ankle splint and physiotherapy after slight improvement in motor power (2/5). Conclusions Foot drop is very rare after spinal anesthesia. Any suspected patient must undergo emergent neurological consultation and magnetic resonance imaging to exclude major finding and need for early surgical intervention.

Resumo Justificativa e objetivos Pé caído no período pós-operatório é muito raro após a anestesia espinhal. Avaliação clínica e intervenções diagnósticas precoces são de primordial importância para estabelecer a etiologia e iniciar o tratamento adequado. Um acompanhamento atento é justificado no pós-operatório imediato nos casos em que o paciente se queixa de parestesia ou dor durante a inserção da agulha ou da injeção de fármacos. Relato de caso Paciente do sexo masculino, 22 anos, submetido a cirurgia ortopédica de membros inferiores sob anestesia espinhal. Durante a transferência para a sala de recuperação pós-operatória, houve suspeita de pé caído durante a avaliação rotineira da regressão do nível espinhal. O paciente foi imediatamente enviado ao neurologista e uma ressonância magnética foi feita, mas não foi conclusiva. O manejo conservador foi iniciado e o estudo de condução nervosa foi feito no 4° dia de pós-operatório, o que confirmou a neuropatia motora pura do nervo fibular direito. O paciente foi dispensado com imobilizador de tornozelo e fisioterapia após ligeira melhoria da força motora (2/5). Conclusões Pé caído é muito raro após a anestesia espinhal. Qualquer paciente suspeito deve ser submetido à consulta neurológica de emergência e ressonância magnética para excluir o principal achado e a necessidade de intervenção cirúrgica precoce.

Nuevas tecnologías para la Sanidad Militar / New technologies for Military Health System

El tratamiento de las bajas de combate en zona de operaciones presenta un conjunto de desafíos, entre los que se encuentra el reto logístico de proporcionar a los cirujanos militares materiales quirúrgicos estériles. La impresión 3D puede ofrecer una solución para superar el desafío logístico mediante la utilización de resinas termoplásticas resistentes, duraderas y biocompatibles, que pueden ser moldeadas en cualquier forma, mediante fabricación por adición, para producir instrumentos quirúrgicos estériles y bajo demanda, en escalones sanitarios desplegados fuera del territorio nacional

The treatment of combat casualties in the area of operations presents a set of challenges, including the logistical challenge of providing sterile surgical materials to military surgeons. 3D printing can offer a solution to overcome the logistical challenge by using resistant, durable and biocompatible thermoplastic resins, which can be formed into any shape, by additive manufacturing, to produce sterile and on demand surgical instruments in a deployed medical echelon outside the national territory

Tratamiento quirúrgico de las dismetrías y deformidades angulares de miembros inferiores mediante epifisiodesis con tornillos transfisarios (técnica de Metaizeau) / Surgical treatment of lower limb length discrepancy and angular deformity by epiphysiodesis with transphyseal screw (Metaizeau technique) / Tratamento cirúrgico das dismetrias e deformidades angulares de membros inferiores mediante epifisiodese com parafusos transfisários (técnica de Metaizeau)

Evaluamos los niños con dismetrías y deformidades angulares operados mediante la Técnica de Metaizeau en el período 2010-2014, mediante un estudio retrospectivo de 11 pacientes, analizados en 2 Grupos. Grupo 1 (Dismetrías), formado por 5 pacientes, de los cuales 3 fueron operados solamente mediante esta técnica, mientras que 2 requirieron adicionalmente procedimientos de alargamiento femoral, valoramos dismetría inicial, dismetría por predicción para el último control y para el final de la madurez, y dismetría final. Grupo 2 (Deformidades Angulares), formado por 6 pacientes, de los cuales 1 presentaba genu varo, 4 genu valgo y 1 valgo de tobillo, valoramos el ángulo femorotibial anatómico, ángulo femoral distal lateral anatómico, ángulo tibial proximal medial, y ángulo tibioastragalino. En ambos Grupos se valoraron las complicaciones. El seguimiento promedio fue de 2 años y 5 meses. En el Grupo 1 obtuvimos dismetría promedio inicial 7,64 cm., dismetría promedio por predicción para el último control 8,54 cm., dismetría promedio final 7,62 cm., corrección promedio lograda 0,91 cm. En el Grupo 2 el promedio de corrección del ángulo femorotibial anatómico 16,85˚, promedio de corrección del ángulo femoral distal lateral anatómico 16,85˚, promedio de corrección del ángulo tibial proximal medial 7,62˚. No detectamos complicaciones en ningún paciente. En 8 (72,72%) pacientes la Técnica fue efectiva, mientras que en 3 (27,27%) los resultados fueron malos por errores técnicos o error en la predicción. La Técnica de Metaizeau, respetando los detalles quirúrgicos y realizando una adecuada predicción, es una buena opción para el tratamiento de dismetrías y deformidades angulares.

We evaluated children with lower limb length discrepancy and angular deformity operated by the Metaizeau technique in the 2010-2014 period through a retrospective study of 11 patients analyzed in 2 groups. Group 1 (Lower limb length discrepancy), consisted of 5 patients, among whom 3 were operated only by Metaizeau technique, whereas the other 2 additionally required procedures for femoral elongation. We evaluated initial discrepancy, predicted discrepancy for ultimate control and at maturity, and final discrepancy. Group 2 (Angular deformity), consisted of 6 patients, among whom 1 had genu varum, 4 genu valgum and, 1 ankle valgus. We evaluated anatomic femorotibial angle, anatomic lateral distal femoral angle, medial proximal tibial angle, and tibio talar angle. In both groups the complications were assessed. The average follow-up was 2 years and 5 months. In Group 1 we obtained the following values: average initial discrepancy, 7.64 cm; average discrepancy predicted for ultimate control, 8.54 cm; average final discrepancy, 7.62 cm and average correction achieved, 0.91 cm. In Group 2 the values were: average correction anatomic femorotibial angle, 16.85˚; average correction anatomic lateral distal femoral angle, 16.85˚ and average correction medial proximal tibial angle, 7.62˚. We found no complications in any patient. In 8 patients (72.72%) the technique was effective, while in 3 (27.27%) the results were poor due to technical errors or prediction errors . Metaizeau Technique, respecting the surgical details and making an accurate prediction is an effective, simple and uncomplicated procedure.

Avaliamos as crianças com dismetrias e deformidades angulares operadas pela técnica de Metaizeau no período de 2010 até 2014, mediante um estudo retrospectivo de 11 pacientes analisados em dois grupos. Grupo 1 (Dismetrias), constituído por cinco pacientes, dos quais 3 foram operados apenas por esta técnica, enquanto que os outros dois precisaram de procedimentos adicionais de alongamento femoral. Avaliamos a dismetria inicial, a dismetria por predição para o último controle e para o final da maturação, e a dismetria final. Grupo 2 (deformidades angulares), constituído por 6 pacientes, entre os quais um apresentava genu varo, 4 genu valgo e um, valgo do tornozelo. Avaliamos o ângulo femorotibial anatômico, o ângulo femoral distal anatômico o ângulo femoral distal lateral anatômico, o ângulo tibial proximal medial, e o ângulo tibioastragalino. Em ambos os grupos foram avaliadas as complicações. O seguimento médio foi de 2 anos e 5 meses. No Grupo 1, obtivemos dismetría inicial média de 7,64 cm, dismetria média por previsão para o último controle de 8,54 cm, dismetría final média de 7,62 cm e correcção média atingida de 0,91 cm. No Grupo 2, a correção de ângulo tibiofemoral anatómica média 16,85˚, correção média do ângulo femoral distal lateral anatómico 16,85˚, e correção média de ângulo tibial proximal medial de 7,62˚. Não detectamos complicações em nenhum paciente. A técnica foi efetiva em 8 (72,72%) pacientes, mas em 3 (27,27%) os resultados foram insatisfatórios por erros técnicos ou na predicção. A técnica de Metaizeau, desde que sejam respeitados os detalhes cirúrgicos e seja feita uma predicção adequada, é uma boa escolha para o tratamento de dismetrías e deformidades angulares.

El uso del manguito de isquemia en COT / The use of tourniquet in orthopaedic surgery

El uso del manguito de isquemia es muy habitual en cirugía ortopédica y traumatología. Las recomendaciones básicas actuales son utilizar un manguito lo más ancho posible, bien almohadillado, y lo más distal posible. La extremidad debe exanguinarse con venda de esmarch o mediante elevación, al menos 5 minutos tras la administración del antibiótico profiláctico de la cirugía (si procede). Nunca se debería mantener durante más de dos horas, y en todo caso, siempre el menor tiempo posible. La presión también debe ser la mínima, recomendándose actualmente usar la presión de oclusión del miembro (LOP) más un margen de seguridad. Si se va a cementar, se recomienda usar isquemia, al menos durante el momento de la cementación. Las complicaciones son raras y casi siempre debidas al mal empleo del torniquete. La más frecuente es el dolor postoperatorio. Cada vez se está usando más el manguito en combinación con técnicas de anestesia troncular (muñeca y tobillo). Las contraindicaciones absolutas para el uso del manguito son la neuropatía periférica, la trombosis venosa profunda, la enfermedad de Raynaud, y la enfermedad vascular periférica

Application of tourniquet during surgery is very common in Orthopaedics. General guidelines are to use a cuff as wide as possible, to pad the tourniquet properly, and to place it distally. The limb should be exanguinated, by elevating and/or using an Esmarch bandage, at least five minutes after the administration of prophylactic antibiotic. The tourniquet should never be hold more than two hours, and in any case, it should be released as soon as possible. Use of lowest effective inflation pressure is the standard, moreover, use of the Limb Occlusion Pressure (LOP) with a safety margin has been currently advocated. It is also recommended to use the tourniquet at least during cementation. In addition, combination of tourniquet with regional anesthesia techniques (wrist and ankle) is becoming more popular. Complications are rare and usually due to a wrong use of the tourniquet. The most common is postoperative pain. Absolute contraindications for the tourniquet are peripheral neuropathy, deep vein thrombosis, Raynaud’s disease and peripheral vascular disease

Luxación congénita de rodilla: a propósito de 2 casos / Congenital dislocation of the knee: Report of 2 cases

La luxación congénita de rodilla (LCR) es una patología muy poco frecuente cuyo diagnóstico se realiza al nacimiento por los hallazgos clínicos, confirmándose radiológicamente. Se ha relacionado con diversas etiologías, desde malas posiciones fetales intraútero hasta trastornos genéticos. El pronóstico dependerá del inicio precoz del tratamiento y de la asociación de otras anomalías congénitas. Presentamos 2 nuevos casos de LCR observados en nuestro hospital en el período de un mes, diagnosticados en los primeros momentos tras el nacimiento, ambos con buena evolución clínica

Congenital dislocation of the knee is a rare disease. The diagnosis is made at birth by clinical findings, and confirmed radiologically. It has been associated with various etiologies from intrauterine fetal malpositions to genetic disorders. The prognosis depends on early treatment and whether there are other congenital anomalies. We report two new cases of congenital dislocation of the knee, observed in our hospital during the period of a month, diagnosed immediately after birth, and both with a good clinical outcome

Inestabilidad Crónica de Tobillo. Actualización / Chronic Ankle Instability. Update

Los esguinces de tobillo son una de las lesiones más comunes en la vida diaria y deportiva. Hasta un 20% de estas lesiones provocan el desarrollo de una inestabilidad crónica de tobillo. En la exploración clínica destaca la referencia a una sensación de falta de control sobre la articulación. El tratamiento debe comenzar por una rehabilitación funcional y preventiva. Si el tratamiento conservador no es suficiente, la primera opción quirúrgica es la reparación ligamentosa directa o anatómica. Cuando los tejidos no son lo suficientemente resistentes, el segundo grupo de técnicas consiste en la reconstrucción anatómica, con diferentes injertos como refuerzo. Cuando estas opciones fracasan, o en estabilidades muy evolucionadas, existe un tercer grupo de técnicas basadas en la tenodesis o reconstrucciones no anatómicas. Es importante evaluar el estado articular en su conjunto, mediante técnicas como la artroscopia, para poder aportar una respuesta al resto de lesiones asociadas a la inestabilidad

Lateral ankle sprains are among the most common injuries incurred during daily life and sports participation. Up to 20% of these injuries result in the development of chronic ankle instability. In clinical examination revealed a reference to a feeling of lack of control over the joint. Treatment should start with a functional and preventive rehabilitation. If conservative treatment is not enough, the initial surgical option is direct or anatomical ligament repair when the quality of the ruptured ligaments permits. Anatomical reconstruction with autograft or allograft should be performed when the ruptured ligaments are attenuated. Non-anatomical reconstruction should be reserved for unsuccessful cases after anatomical repair or in cases where no adequate ligament remnants are available for reconstruction. Ankle arthroscopy is an important adjunct to ligamentous repair and should be performed at the time of repair to identify and address intra-articular conditions associated with chronic ankle instability