A carboethoxy quinoline-Derived Schiff base chemosensor: Crystal structure, selective Hg2+ ion detection and its computational study.

Environmental monitoring of mercury (Hg2+) ions has become increasingly important as a result of their detrimental effects on biological organisms at all levels. To recognize toxic metal ions, utmost effort has been devoted to developing new materials that are highly selective, ultra-sensitive, and provide rapid response. In this context, a new chemosensor, 2-imino [N - (N-amido phenyl)]-6-methoxy-3-carbethoxy quinoline (L), has been synthesized by combining 2-formyl-6-methoxy-3-carbethoxy quinoline and benzhydrazide and it has been extensively characterized by NMR, FTIR, ESI-Mass and SCXRD analysis. Probe L has excellent specificity and sensitivity toward Hg2+ ions in semi-aqueous solutions, with a detection limit of 0.185 µM, regardless of the presence of other interfering cations. Chromogenic behavior was demonstrated by the L when it changed the color of the solution from colorless to light yellow, a change that can be observed visually. The probe L forms a 1:1 stochiometric complex with an estimated association constant (Ka) of 6.74 × 104 M-1. The 1H NMR change and density functional theory calculations were analyzed to improve our understanding of the sensing mechanism. Also, an inexpensive and simple paper-based test kit has been developed for the on-site detection of mercury ions in water samples.

Quinoline-quinoline schiff-base as an effective chromogenic, fluorogenic, and smartphone assisted RGB detection of Pb2+ ion in near aqueous medium.

A novel multimode colorimetric and fluorescent chemosensor was developed using an 8-hydroxy quinoline carbaldehyde Schiff base with a quinoline hydrazide probe (E)-2-((2-(quinolin-2-yl)hydrazineylidene)methyl)quinolin-8-ol (L). NMR (1H & 13C), FTIR, and HR-mass spectral characterization techniques confirmed the probe L structural conformation. As Probe L contacts Pb2+ ions, a color change and turn-off emission can be visually detected in EtOH:H2O (1:1, v/v, pH = 7.21) medium. The probe displays a good emission at 440 nm due to the combined ESIPT and ICT process. The Pb2+ ion interacts with the probe and selectively quenches fluorescence by inhibiting ESIPT and >CN- isomerization. As per Job's plot, L-Pb2+ complex formation occurred in a 1:1 stoichiometric ratio, with association constant (Ka) and quenching constant (Ksv) estimated at 1.52 × 105 M-1 and 4.12 × 105 M, respectively. The detection limits of Pb2+ by spectrophotometric and spectrofluorometric were 1.99 µM (41 ppb) and 23.4 nM (485 ppt), respectively. Additionally, the test paper kit and RGB tool were used to monitor the color changes of L with Pb2+ and the LOD was found to be 5.99 µM (125 ppb). Its recognition mechanism has been verified by 1H NMR, ESI-mass, and theoretical studies.

Solvent-free automated thermal desorption-gas chromatography/mass spectrometry for direct screening of hazardous compounds in consumer textiles.

The global production of textiles utilizes numerous large-volume chemicals that may remain to some extent in the finished garments. Arylamines, quinolines, and halogenated nitrobenzene compounds are possible mutagens, carcinogens and/or skin sensitizers. For prevention, control of clothing and other textiles must be improved, especially those imported from countries without regulations of textile chemicals. An automated analytical methodology with on-line extraction, separation, and detection would largely simplify screening surveys of hazardous chemicals in textiles. Automated thermal desorption-gas chromatography/mass spectrometry (ATD-GC/MS) was developed and evaluated as a solvent-free, direct chemical analysis for screening of textiles. It requires a minimum of sample handling with a total run time of 38 min including sample desorption, chromatographic separation, and mass spectrometric detection. For most of the studied compounds, method quantification limit (MQL) was below 5 µg/g for 5 mg of textile sample, which is sufficiently low for screening and control of quinoline and arylamines regulated by EU. Several chemicals were detected and quantified when the ATD-GC/MS method was applied in a limited pilot screening of synthetic fiber garments. A number of arylamines were detected, where some of the halogenated dinitroanilines were found in concentrations up to 300 µg/g. This is ten times higher than the concentration limit for similar arylamines listed by the EU REACH regulation. Other chemicals detected in the investigated textiles were several quinolines, benzothiazole, naphthalene, and 3,5-dinitrobromobenzene. Based on the present results, we suggest ATD-GC/MS as a screening method for the control of harmful chemicals in clothing garments and other textiles.

Suspect and non-target screening of chemicals in clothing textiles by reversed-phase liquid chromatography/hybrid quadrupole-Orbitrap mass spectrometry.

The global manufacturing of clothing is usually composed of multistep processes, which include a large number of chemicals. However, there is generally no information regarding the chemical content remaining in the finished clothes. Clothes in close and prolonged skin contact may thus be a significant source of daily human exposure to hazardous compounds depending on their ability to migrate from the textiles and be absorbed by the skin. In the present study, twenty-four imported garments on the Swedish market were investigated with respect to their content of organic compounds, using a screening workflow. Reversed-phase liquid chromatography coupled to electrospray ionization/high-resolution mass spectrometry was used for both suspect and non-target screening. The most frequently detected compound was benzothiazole followed by quinoline. Nitroanilines with suspected mutagenic and possible skin sensitization properties, and quinoline, a carcinogenic compound, were among the compounds occurring at the highest concentrations. In some garments, the level of quinoline was estimated to be close to or higher than 50,000 ng/g, the limit set by the REACH regulation. Other detected compounds were acridine, benzotriazoles, benzothiazoles, phthalates, nitrophenols, and organophosphates. Several of the identified compounds have logP and molecular weight values enabling skin uptake. This pilot study indicates which chemicals and compound classes should be prioritized for future quantitative surveys and control of the chemical content in clothing as well as research on skin transfer, skin absorption, and systemic exposure. The results also show that the current control and prevention from chemicals in imported garments on the Swedish market is insufficient.

Determination of intracellular anlotinib, osimertinib, afatinib and gefitinib accumulations in human brain microvascular endothelial cells by liquid chromatography/tandem mass spectrometry.

RATIONALE: Brain metastases are a common complication in patients with non-small-cell lung cancer (NSCLC). Anlotinib hydrochloride is a novel multi-target tyrosine kinase inhibitor (TKI) exhibiting a superior overall response rate for brain metastases from NSCLC. The penetrability of anlotinib and three generations of epidermal growth factor receptor (EGFR) TKIs (osimertinib, afatinib and gefitinib) into brain microvascular endothelial cells (HBMECs) was compared. METHODS: A sensitive quantification method for the four TKIs was developed using liquid chromatography coupled to tandem mass spectrometry (LC/MS/MS). Anlotinib and the three EGFR TKIs were separated on an ACQUITY BEH C18 column after a direct protein precipitation, and then analyzed using electrospray ionization in positive ion mode. The linearity, accuracy, precision, limit of quantification, specificity and stability were assessed. RESULTS: The four analytes could be efficiently quantified in a single run of 3.8 min. The validation parameters of all analytes satisfy the acceptance criteria of bioanalytical method guidelines. The calibration range was 0.2-200 ng mL-1 for anlotinib and gefitinib, 1-500 ng mL-1 for osimertinib and 1-200 ng mL-1 for afatinib. The penetration of anlotinib across HBMECs was comparable with that of afatinib and gefitinib but less than that of osimertinib. CONCLUSIONS: A sensitive LC/MS/MS method to simultaneously measure anlotinib, osimertinib, afatinib and gefitinib in cell extracts was successfully validated and applied to determine their uptake inside HBMECs, which could pave the way for future research on the role of anlotinib in NSCLC brain metastases.

Surface sensing triggers a broad-spectrum antimicrobial response in Pseudomonas aeruginosa.

Interspecies bacterial competition may occur via cell-associated or secreted determinants and is key to successful niche colonization. We previously evolved Pseudomonas aeruginosa in the presence of Staphylococcus aureus and identified mutations in the Wsp surface-sensing signalling system. Surprisingly, a ΔwspF mutant, characterized by increased c-di-GMP levels and biofilm formation capacity, showed potent killing activity towards S. aureus in its culture supernatant. Here, we used an unbiased metabolomic analysis of culture supernatants to identify rhamnolipids, alkyl quinoline N-oxides and two siderophores as members of four chemical clusters, which were more abundant in the ΔwspF mutant supernatants. Killing activities were quorum-sensing controlled but independent of c-di-GMP levels. Based on the metabolomic analysis, we formulated a synthetic cocktail of four compounds, showing broad-spectrum anti-bacterial killing, including both Gram-positive and Gram-negative bacteria. The combination of quorum-sensing-controlled killing and Wsp-system mediated biofilm formation endows P. aeruginosa with capacities essential for niche establishment and host colonization.

Formation of a Thiol-Ene Addition Product of Asthma Medication Montelukast Caused by a Widespread Tin-Based Thermal Stabilizer.

We report the formation and characterization of two diastereomeric thiol-ene addition products of the asthma medication Montelukast within chewing tablets. Widespread tin-based thermal stabilizers dioctyltin bis(2-ethylhexyl thioglycolate) and monooctyltin tris(2-ethylhexyl thioglycolate), used in the manufacturing process of the medication's forming foil, were identified as the source of the thiol reactant, showing that these stabilizers may play a part in the degradation of Montelukast and APIs with functionalities similar to those of Montelukast, which should be considered during development of medication. The isolation and analysis of these impurities was performed by HPLC and UV-vis spectroscopy. HRMS and NMR data were collected to characterize and determine the structures of these compounds.

Non-rhizobial endophytic (NRE) yeasts assist nodulation of Rhizobium in root nodules of blackgram (Vigna mungo L.).

The signal orchestration between legumes and the rhizobia attribute to symbiotic nitrogen fixation through nodule formation. Root nodules serve as a nutrient-rich reservoir and harbor diverse microbial communities. However, the existence of non-rhizobial endophytes (NRE) and their role inside the root nodules are being explored; there is no evidence on yeast microflora inhabiting nodule niche. This study focused on unraveling the presence of yeast in the root nodules and their possible function in either nodulation or signal exchange. From the root nodules of blackgram, two yeast strains were isolated and identified as Candida glabrata VYP1 and Candida tropicalis VYW1 based on 18S rRNA gene sequencing and phylogeny. These strains possessed plant growth-promoting traits viz., IAA, ACC deaminase, siderophore, ammonia, and polyamine production. The functional capacity of endophytic yeast strains, and their interaction with Rhizobium sp. was further unveiled via profiling volatile organic compounds (VOC). Among the VOCs, α-glucopyranoside and pyrroloquinoline pitches a pivotal role in activating lectin pathways and phosphorous metabolism. Further, lectin pathways are crucial for nodulating bacterium, and our study showed that these endophytic yeasts assist nodulation by Rhizobium sp. via activating the nod factors. The plant growth-promoting traits of NRE yeast strains coupled with their metabolite production, could recruit them as potential drivers in the plant-microbe interaction.

Synergistic effect of Pseudomonas putida II-2 and Achromobacter sp. QC36 for the effective biodegradation of the herbicide quinclorac.

Quinclorac (QNC) is an effective but environmentally persistent herbicide commonly used in rice production. However, few studies have investigated its environmental behavior and degradation. In the present study, we carried out microbial cultures in the presence of QNC to observe changes in soil microbiota and to identify species capable of QNC degradation by using high-throughput sequencing of the 16S rRNA. Pseudomonas was the dominant genus, and Pseudomonas putida II-2 and other species were found to be capable of mineralizing QNC as a source of carbon and energy. However, this degradation rate was slow, only reaching 51.5 ± 1.6% for 7 days at 30 °C on QNC + minimal salt medium. Achromobacter sp. QC36 co-metabolized QNC when rice straw was added into the mineral salt medium containing QNC, and a mixed culture of both strains could mineralize approximately 92% of the 50 mg/L QNC after 5 days of cultivation in the presence of rice straw, at 25-35 °C and pH 6.0-8.0. Non-phytotoxicity of tobacco after degradation of QNC by mixed strains was evidenced in a pot experiment. These results suggest that this mixed culture may be useful in QNC bioremediation and can be used as a bio-formulation for agro-economical and industrial application.

A novel HPLC method developed and validated for the detection and quantification of atorvastatin, fluvastatin, pitavastatin and pravastatin during transdermal delivery studies.

An HPLC method was developed and validated to quantify and identify several statins (atorvastatin, fluvastatin, pitavastatin and pravastatin) that were used during transdermal drug delivery. The method proved to be most effective with a Restek Ultra C18, 250 x 4.6 mm, 5 µm column, a flow rate of 1.0 ml/min, UV detection at 240 nm and injection volume of 10 µl. The mobile phase used was acetonitrile/Milli-Q® water with 0.1% orthophosphoric acid starting with 30% acetonitrile, which increased linearly to 70% (after 4 min) for up to 10 min and then re-equilibrated to start conditions. This HPLC method indicated linearity (correlation coefficient (R²) of 1) within the concentration range of 0.05-200.00 µg/ml and had an average recovery of 98-103%. Limit of detection (LOD) and limit of quantification (LOQ) showed that statins could still be identified at concentrations of 0.004-0.006 µg/ml with the exception of atorvastatin (quantifiable at 0.013-0.035 µg/ml). Specificity performed during method validation, confirmed that the method was suitable for accurate detection and quantification of the statins when included in the transdermal formulations with other excipients.

Copper nanoclusters: an efficient fluorescence sensing platform for quinoline yellow.

Fluorescence quenching behavior of artificial food colorant quinoline yellow (QY), on interaction with l-cysteine stabilized copper nanoclusters (l-Cys-CuNCs) is investigated in this work. For this purpose, l-cysteine stabilized CuNCs were synthesized and characterized using various analytical techniques. Results demonstrated that the synthesized probe (size ~2 nm) had very promising optical features such as bright blue fluorescence, significant quantum yield and excellent photostability. l-Cys-CuNCs can function as a fluorescence sensor by selectively sensing QY among other yellow colorants, giving a detection limit as low as 0.11 µM. The developed sensor exhibited a linear concentration range from 5.50 to 0.20 µM. The developed fluorescence assay was successfully applied for testing commercial samples, thereby making this sensing strategy significant for quality control of food stuffs.

Study of pre-treatment of quinoline in aqueous solution using activated carbon made from low-cost agricultural waste (walnut shells) modified with ammonium persulfate.

Activated carbon made from agricultural waste (walnut shells) was investigated as a suitable adsorbent for effectively removing quinoline from industrial wastewater. The activated carbon was treated with phosphoric acid and oxidized by ammonium persulfate and its ability to adsorb pyridine and quinoline in aqueous solution was investigated. Kinetic parameters for the adsorption process were determined through pseudo-first-order and pseudo-second-order kinetic models and intraparticle diffusion models. Equilibrium experiments and adsorption isotherms were analyzed using Langmuir and Freundlich adsorption isotherms. After reaching equilibrium, the activated carbon adsorbed quinoline in preference to pyridine: the equilibrium adsorptions from individual aqueous solutions (200 µL L-1) of quinoline and pyridine were 166.907 mg g-1 and 72.165 mg g-1, respectively. Thermodynamic studies of quinoline adsorption were conducted at different temperatures and indicated that quinoline adsorption was an endothermic and spontaneous process. The column-adsorption of quinoline and pyridine was consistent with the Thomas model and the Yoon-Nelson model. The removal efficiency of quinoline reached more than 97% for a velocity of 6 mL min-1 at the initial adsorption stage.

Quantitative SIMS Imaging of Agar-Based Microbial Communities.

After several decades of widespread use for mapping elemental ions and small molecular fragments in surface science, secondary ion mass spectrometry (SIMS) has emerged as a powerful analytical tool for molecular imaging in biology. Biomolecular SIMS imaging has primarily been used as a qualitative technique; although the distribution of a single analyte can be accurately determined, it is difficult to map the absolute quantity of a compound or even to compare the relative abundance of one molecular species to that of another. We describe a method for quantitative SIMS imaging of small molecules in agar-based microbial communities. The microbes are cultivated on a thin film of agar, dried under nitrogen, and imaged directly with SIMS. By use of optical microscopy, we show that the area of the agar is reduced by 26 ± 2% (standard deviation) during dehydration, but the overall biofilm morphology and analyte distribution are largely retained. We detail a quantitative imaging methodology, in which the ion intensity of each analyte is (1) normalized to an external quadratic regression curve, (2) corrected for isomeric interference, and (3) filtered for sample-specific noise and lower and upper limits of quantitation. The end result is a two-dimensional surface density image for each analyte. The sample preparation and quantitation methods are validated by quantitatively imaging four alkyl-quinolone and alkyl-quinoline N-oxide signaling molecules (including Pseudomonas quinolone signal) in Pseudomonas aeruginosa colony biofilms. We show that the relative surface densities of the target biomolecules are substantially different from values inferred through direct intensity comparison and that the developed methodologies can be used to quantitatively compare as many ions as there are available standards.

Development and validation of an LC-MS/MS method for the determination of a novel thienoquinolin urea transporter inhibitor PU-48 in rat plasma and its application to a pharmacokinetic study.

A specific, sensitive and stable high-performance liquid chromatographic-tandem mass spectrometry (LC-MS/MS) method was developed and validated for the quantitative determination of methyl 3-amino-6-methoxythieno [2,3-b]quinoline-2-carboxylate (PU-48), a novel diuretic thienoquinolin urea transporter inhibitor in rat plasma. In this method, the chromatographic separation of PU-48 was achieved with a reversed-phase C18 column (100 × 2.1 mm, 3 µm) at 35°C. The mobile phase consisted of acetonitrile and water with 0.05% formic acid added with a gradient elution at flow rate of 0.3 mL/min. Samples were detected with the triple-quadrupole tandem mass spectrometer with multiple reaction monitoring mode via electrospray ionization source in positive mode. The retention time were 6.2 min for PU-48 and 7.2 min for megestrol acetate (internal standard, IS). The monitored ion transitions were mass-to-charge ratio (m/z) 289.1 → 229.2 for PU-48 and m/z 385.3 → 267.1 for the internal standard. The calibration curve for PU-48 was linear over the concentration range of 0.1-1000 ng/mL (r2 > 0.99), and the lower limit of quantitation was 0.1 ng/mL. The precision, accuracy and stability of the method were validated adequately. The developed and validated method was successfully applied to the pharmacokinetic study of PU-48 in rats.

Decay of Quinclorac in Acidic Paddy Soil and Risk Evaluation to the Subsequent Crop, Tobacco (Nicotiana tabacum L.).

Quinclorac is a selective herbicide commonly used in China to control monocotyledonous weeds in paddy fields. A field experiment was conducted to quantify the environmental behavior of quinclorac in acidic paddy soil under rice (Oryza sativa L.) field conditions, and to evaluate the risk of its residues to the subsequent crop of tobacco (Nicotiana tabacum L.). Rice was sprayed once with quinclorac 50% WP at 562.5, 375.0, or 187.5 g a.i. ha-1 at 7 days after transplanting the seedlings. Decay of quinclorac in paddy field soil followed first-order kinetics, with a half-life of 28.29-30.27 days. At harvest time, 0.090, 0.074 and 0.034 mg kg-1 of quinclorac were found in soils following the above-described treatments, respectively. Leaves of the subsequent crop, tobacco, sown the year after the quinclorac treatments, exhibited different dose-dependent degrees of visible phytotoxicity symptoms.

A 4,5-quinolimide-based fluorescent sensor for the turn-on detection of Cd2+ with live-cell imaging.

A 4,5-quinolimide derivative, BNA, bearing the amide-DPA receptor, was synthesized as a turn-on fluorescent sensor for Cd2+. Under physiological conditions, BNA could distinguish Cd2+ from Zn2+, showing turn-on fluorescence behaviour and an increased fluorescence lifetime. BNA and Cd2+ formed a 1 : 1 stoichiometric complex, and the detection limit was measured to be as low as 11 nM. Furthermore, BNA was utilized for fluorescence imaging of Cd2+ in live cells. To the best of our knowledge, it is the first 4,5-quinolimide-based sensor for the detection of metal ions.

Assessment of quinoxyfen phototransformation pathways by liquid chromatography coupled to accurate mass spectrometry.

Quinoxyfen has been recently identified as a priority hazardous substance in the field of the European water policy. In this work, its fate in aqueous samples and solid supports under UV and solar radiation is investigated. Diverse degradation experiments were carried out, at lab scale, using spiked aliquots of different aqueous matrices (ultrapure, treated wastewater and river water) irradiated at different wavelengths (λ = 254 nm, λ = 365 nm and solar light). Half-lives of quinoxyfen (2-26 min) depended on the wavelength and the intensity of radiation whilst the nature of the aqueous matrix did not play an important role in degradation kinetics. Moreover, experiments under solar radiation of doped silicone tubes were performed to simulate degradation when quinoxyfen is adsorbed on plant leaves or soil. As the compound is not completely mineralized, the identification of quinoxyfen transformation products (TPs) was performed by liquid chromatography quadrupole time-of-flight mass spectrometry (LC-QTOF-MS) injection of different irradiated time aliquots. The full-fragment ion spectra, at different collision energies, allowed the elucidation of the chemical structure of TPs formed by hydroxylation, cyclization or cleavage reactions. Five out of seven identified TPs have not been reported previously. The ecotoxicity simulation by software (TEST and ECOSAR) for TPs revealed that some of them could cause harmful effects to organisms such as Daphnia magna or Fathead minnow in a similar extent to the precursor; moreover, the time course profiles of major TPs (TP1 and TP2) revealed a much higher resistance to further photodegradation than quinoxyfen. Graphical abstract Quinoxyfen phototransformation pathways.

An eco-friendly direct spectrofluorimetric method for the determination of irreversible tyrosine kinase inhibitors, neratinib and pelitinib: application to stability studies.

A new rapid and simple stability-indicating spectrofluorimetric method has been developed for the determination of two irreversible tyrosine kinase inhibitors (TKIs), neratinib (NER) and pelitinib (PEL). The method is based upon measurement of the native fluorescence intensity of both drugs at λex 270 nm in aqueous borate buffer solutions (pH 10.5). The fluorescence intensity recorded at 545 nm (NER) and 465 nm (PEL) were rectilinear over the concentration range of 0.1-10 µg/mL for both drugs with a high correlation coefficient (r > 0.999). The proposed method provided low limits of detection and of quantitation of 0.07, 0.11 µg/mL (NER) and 0.02, 0.05 µg/mL (PEL), respectively. The method was successfully applied for the determination of NER and PEL in bulk powder. The proposed methods were fully validated as per the International Conference on Harmonisation (ICH) guidelines. The application of the method was extended to stability studies of both NER and PEL under different forced-degradation conditions (acidic-induced, base-induced, oxidative, wet heat, and photolytic degradation). Moreover, the kinetics of the base-induced and oxidative degradation of both drugs was investigated and the pseudo-first-order rate constants and half-lives were estimated at different temperatures. Also, an Arrhenius plot was applied to predict the stability behaviour of the two drugs at room temperature. Copyright © 2016 John Wiley & Sons, Ltd.

Development of an enantioselective capillary electrophoretic method for the simultaneous determination of montelukast enantiomeric and diastereoisomeric forms and its main degradation product.

A stereoselective CD-MEKC system has been developed for the quality control of Montelukast (MK), commercialized as a pure enantiomer. The proposed method is the first one that allows the simultaneous determination of MK, its enantiomeric form, diasteroisomers and its main degradation compound (MK sulphoxide). CD-MEKC system is composed of 10 mM SDS, 10 mM sulfobutylether-ß-CD, 10 mM TM-ß-CD, and 20 mM borate buffer at pH 9.0. Combination of these two CDs allows high baseline enantioresolution between MK and its enantiomeric impurity, but also, between the diasteroisomeric forms. Moreover, a multivariate design was applied to optimize operational parameters. The method was designed to meet with requirements of the official pharmacopoeias and fully validated according to international guidelines. Linearity of MK was demonstrated in the range from 10.0 to 100.0 µg/mL (r(2) = 0.9908) with a LOD and LOQ of 0.30 and 0.90 µg/mL, respectively. Intra and interday precision were evaluated and RSD values were below 2%, and also, accuracy expressed as percentage of recovery was in a range from 99.0 to 101.9 for the three assayed levels. The method allows determining 0.02% w/w of the enantiomeric and diasteroisomeric impurities, and 0.01% w/w of MK sulphoxide. Robustness was evaluated by a Plackett and Burman design. Finally, the CD-MEKC system was successfully applied to the determination of related substances in MK bulk drug and its quantification in two pediatric pharmaceutical dosage forms.