The role of Chito-oligosaccharide in regulating ovarian germ stem cells function and restoring ovarian function in chemotherapy mice.

In recent years, the discovery of ovarian germ stem cells (OGSCs) has provided a new research direction for the treatment of female infertility. The ovarian microenvironment affects the proliferation and differentiation of OGSCs, and immune cells and related cytokines are important components of the microenvironment. However, whether improving the ovarian microenvironment can regulate the proliferation of OGSCs and remodel ovarian function has not been reported. In this study, we chelated chito-oligosaccharide (COS) with fluorescein isothiocyanate (FITC) to track the distribution of COS in the body. COS was given to mice through the best route of administration, and the changes in ovarian and immune function were detected using assays of organ index, follicle counting, serum estrogen (E2) and anti-Mullerian hormone (AMH) levels, and the expression of IL-2 and TNF-α in the ovaries. We found that COS significantly increased the organ index of the ovary and immune organs, reduced the rate of follicular atresia, increased the levels of E2 and AMH hormones, and increased the protein expression of IL-2 and TNF-α in the ovary. Then, COS and OGSCs were co-cultured to observe the combination of COS and OGSCs, and measure the survival rate of OGSCs. With increasing time, the fluorescence intensity of cells gradually increased, and the cytokines IL-2 and TNF-α significantly promoted the proliferation of OGSCs. In conclusion, COS could significantly improve the ovarian and immune function of chemotherapy model mice, and improve the survival rate of OGSCs, which provided a preliminary blueprint for further exploring the mechanism of COS in protecting ovarian function.

Surface modifications affect iron oxide nanoparticles' biodistribution after multiple-dose administration in rats.

Iron oxide nanoparticles (IONPs) possess many utilizable physical and chemical properties and have an acceptable level of biocompatibility. Therefore, they are extensively used in different medical applications. Hence, the challenge is to modify the surfaces of prepared iron oxide nanoformulations with a biocompatible coat to enhance their biosafety. In this study, different formulations of IONPs with different capping agents (citrate [Cit-IONPs], curcumin [Cur-IONPs], and chitosan [CS-IONPs]) were prepared and characterized using various physicochemical techniques. The biodistribution of iron and the histopathology of affected tissues were assessed after Cit-IONPs, Cur-IONPs, CS-IONPs, and commercial ferrous sulfate were orally administered to adult female Wistar rats for 10 consecutive days at a dose of 4 mg/kg of body weight/day. The results were compared with a control group injected orally with saline. The iron content in the kidneys, liver, and spleen was measured by atomic absorption spectroscopy. Histopathological alterations were also examined. The biodistribution results demonstrate that iron accumulated mainly in the liver tissue, whereas the lowest liver accumulation was observed after the administration of Cit-IONPs or CS-IONPs, respectively. In contrast, the administration of CS-IONPs displayed the highest spleen iron accumulation. The ferrous sulfate (FeSO4 )-treated group showed the highest kidney iron accumulation as compared with the other groups. The histopathological examination revealed that signs of toxicity were predominant for groups treated with Cit-IONPs or commercial FeSO4 . However, Cur-IONPs and CS-IONPs showed mild toxicity when administered at the same doses. The results obtained in the present study will provide insights into the expected in vivo effects after administration of each nanoformulation.

Synthesis and characterization of thermosensitive hydrogel based on quaternized chitosan for intranasal delivery of insulin.

Nasal administration is a form of systemic administration in which drugs are insufflated through the nasal cavity. Steroids, nicotine replacement, antimigraine drugs, and peptide drugs are examples of the available systematically active drugs as nasal sprays. For diabetic patients who need to use insulin daily, the nasal pathway can be used as an alternative to subcutaneous injection. In this regard, intranasal insulin delivery as a user-friendly and systemic administration has recently attracted more attention. In this study, a novel formulation consists of chitosan, chitosan quaternary ammonium salt (HTCC), and gelatin (Gel) was proposed and examined as a feasible carrier for intranasal insulin administration. First, the optimization of the chitosan-HTCC hydrogel combination has done. Afterward, Gel with various amounts blended with the chitosan-HTCC optimized samples. In the next step, swelling rate, gelation time, degradation, adhesion, and other mechanical, chemical, and biological properties of the hydrogels were studied. Finally, insulin in clinical formulation and dosage was blended with optimized thermosensitive hydrogel and the release procedure of insulin was studied with electrochemiluminescence technique. The optimal formulation (consisted of 2 wt% chitosan, 1 wt% HTCC, and 0.5 wt% Gel) showed low gelation time, uniform pore structure, and the desirable swelling rate, which were resulted in the adequate encapsulation and prolonged release of insulin in 24 H. The optimal samples released 65% of the total amount of insulin in the first 24 H, which is favorable for this study.

Design and in vitro antibiofilm activity of propolis diffusion-controlled biopolymers.

In this study, a novel pH-sensitive hydrogel beads that is based on gelatin/sodium alginate/chitosan (GEL/SA/CS) loaded with propolis ethanolic extracts (PE) were synthesized. The swelling behavior of GEL/SA/CS hydrogel beads was studied in different pH solutions and compared with unloaded CS (GEL/SA) hydrogel beads. The in vitro release studies have been revealed using four different pH (1.3, 5.0, 6.0, and 6.8), a saliva environment (pH 6.8), a simulated gastric fluid (SGF) (pH 1.3), and a simulated intestinal fluid (SIF) (pH 6.8) to simulate the physiological conditions in gastrointestinal (GI) tract. Propolis-loaded hydrogel beads were found to be stable at pH 1.3, 5.0, 6.0, simulated saliva, SGF, and SIF mediums, whereas the beads lose their stability at pH 6.8 buffer solution. Tested microorganisms displayed greater sensitivity to PE-loaded hydrogel beads compared with pure propolis. Contrary to antimicrobial activity results, antibiofilm activity results of PE-loaded GEL/SA and GEL/SA/CS hydrogel beads were found at low levels. According to the obtained results, the propolis-loaded GEL/SA/CS hydrogel beads synthesized within this study can be used in the treatment of GI tract diseases such as oral mucositis, gastric ulcer, ulcerative colitis, and GI cancer, as controlled releasing carriers of propolis.

Evaluation of hyaluronic acid nanoparticle embedded chitosan-gelatin hydrogels for antibiotic release.

The development of chitosan-gelatin (CS-G) hydrogels embedded with ampicillin-loaded hyaluronic acid nanoparticles (HA-NPs) for wound dressing is proposed. It was aimed to provide controlled ampicillin delivery by incorporation of HA-NPs into biocompatible CS-G hydrogel structure. According to in vitro ampicillin release studies, 55% of ampicillin was released from CS-G/HA-NPs hydrogels after 5 days. Antibacterial performance of CS-G/HA-NPs hydrogels was proven with agar disc diffusion test. For cytotoxicity assay, fibroblast cell viability increased in CS-G/HA-NPs hydrogels compared with CS-G group after 24 hr incubation. Consequently, the potential ability of CS-G/HA-NPs hydrogels as a controlled drug delivery system has been verified.

The Formation of Chitosan-Coated Rhamnolipid Liposomes Containing Curcumin: Stability and In Vitro Digestion.

There is growing interest in developing biomaterial-coated liposome delivery systems to improve the stability and bioavailability of curcumin, which is a hydrophobic nutraceutical claimed to have several health benefits. The curcumin-loaded rhamnolipid liposomes (Cur-RL-Lips) were fabricated from rhamnolipid and phospholipids, and then chitosan (CS) covered the surface of Cur-RL-Lips by electrostatic interaction to form CS-coated Cur-RL-Lips. The influence of CS concentration on the physical stability and digestion of the liposomes was investigated. The CS-coated Cur-RL-Lips with RL:CS = 1:1 have a relatively small size (412.9 nm) and positive charge (19.7 mV). The CS-coated Cur-RL-Lips remained stable from pH 2 to 5 at room temperature and can effectively slow the degradation of curcumin at 80 °C; however, they were highly unstable to salt addition. In addition, compared with Cur-RL-Lips, the bioavailability of curcumin in CS-coated Cur-RL-Lips was relatively high due to its high transformation in gastrointestinal tract. These results may facilitate the design of a more efficacious liposomal delivery system that enhances the stability and bioavailability of curcumin in nutraceutical-loaded functional foods and beverages.

Formulation of Quaternized Aminated Chitosan Nanoparticles for Efficient Encapsulation and Slow Release of Curcumin.

An effective drug nanocarrier was developed on the basis of a quaternized aminated chitosan (Q-AmCs) derivative for the efficient encapsulation and slow release of the curcumin (Cur)-drug. A simple ionic gelation method was conducted to formulate Q-AmCs nanoparticles (NPs), using different ratios of sodium tripolyphosphate (TPP) as an ionic crosslinker. Various characterization tools were employed to investigate the structure, surface morphology, and thermal properties of the formulated nanoparticles. The formulated Q-AmCs NPs displayed a smaller particle size of 162 ± 9.10 nm, and higher surface positive charges, with a maximum potential of +48.3 mV, compared to native aminated chitosan (AmCs) NPs (231 ± 7.14 nm, +32.8 mV). The Cur-drug encapsulation efficiency was greatly improved and reached a maximum value of 94.4 ± 0.91%, compared to 75.0 ± 1.13% for AmCs NPs. Moreover, the in vitro Cur-release profile was investigated under the conditions of simulated gastric fluid [SGF; pH 1.2] and simulated colon fluid [SCF; pH 7.4]. For Q-AmCs NPs, the Cur-release rate was meaningfully decreased, and recorded a cumulative release value of 54.0% at pH 7.4, compared to 73.0% for AmCs NPs. The formulated nanoparticles exhibited acceptable biocompatibility and biodegradability. These findings emphasize that Q-AmCs NPs have an outstanding potential for the delivery and slow release of anticancer drugs.

Polyvinyl Alcohol/Chitosan Single-Layered and Polyvinyl Alcohol/Chitosan/Eudragit RL100 Multi-layered Electrospun Nanofibers as an Ocular Matrix for the Controlled Release of Ofloxacin: an In Vitro and In Vivo Evaluation.

A novel nanofiber insert was prepared with a modified electrospinning method to enhance the ocular residence time of ofloxacin (OFX) and to provide a sustained release pattern by covering hydrophilic polymers, chitosan/polyvinyl alcohol (CS/PVA) nanofibers, with a hydrophobic polymer, Eudragit RL100 in layers, and by glutaraldehyde (GA) cross-linking of CS-PVA nanofibers for the treatment of infectious conjunctivitis. The morphology of the prepared nanofibers was studied using scanning electron microscopy (SEM). The average fiber diameter was found to be 123 ± 23 nm for the single electrospun nanofiber with no cross-linking (OFX-O). The single nanofibers, cross-linked for 10 h with GA (OFX-OG), had an average fiber diameter of 159 ± 30 nm. The amount of OFX released from the nanofibers was measured in vitro and in vivo using UV spectroscopy and microbial assay methods against Staphylococcus aureus, respectively. The antimicrobial efficiency of OFX formulated in cross-linked and non-cross-linked nanofibers was affirmed by observing the inhibition zones of Staphylococcus aureus and Escherichia coli. In vivo studies using the OFX nanofibrous inserts on a rabbit eye confirmed a sustained release pattern for up to 96 h. It was found that the cross-linking of the nanofibers by GA vapor could reduce the burst release of OFX from OFX-loaded CS/PVA in one layer and multi-layered nanofibers. In vivo results showed that the AUC0-96 for the nanofibers was 9-20-folds higher compared to the OFX solution. This study thus demonstrates the potential of the nanofiber technology is being utilized to sustained drug release in ocular drug delivery systems.

Evidences of Biomimetic and Nonantibiotic Characteristics of the Zinc-Carboxymethyl Chitosan-Genipin Organometallic Complex and Its Biocompatibility Aspects.

Bioinspired nonantibiotics can prove to be a better and an efficient tool to fight against antimicrobial resistance. In our study, biomaterial composed of zinc-carboxymethyl chitosan (CMC)-genipin was investigated for this purpose. Briefly, CMC was synthesized and transformed to porous scaffolds using the freeze drying method. The scaffolds were cross-linked and stabilized with genipin and zinc (2 M zinc acetate), respectively. FTIR spectroscopic data testified Zn complex formation and pointed out the absence of water molecule like that of zinc motif containing proteins. Hence, the complex may be termed as biomimetic. Genipin (0.5%) cross-linking appeared to contribute additively to the wet compressive strength of the zinc-CMC scaffolds. Biodegradation data revealed better stability of CMC-genipin-zinc scaffolds in enzymatic and nonenzymatic conditions than their redundant controls. The scaffolds seem to support adhesion and proliferation of human dental pulp stem cells and were hemocompatible to human red blood corpuscles, as revealed by scanning electron microscopy. The scaffolds were found to be antibacterial and mildly antibiofilm when tested against biofilm-forming bacteria, that is, Staphylococcus aureus (ATCC 9144), making it a potential nonantibiotic-like biomaterial. To conclude, this organometallic complex-based biomaterial may potentially serve as a weapon against antimicrobial resistance. Furthermore, the biomaterial potentially finds its application in dental, maxillofacial, and orthopedic tissue engineering applications.

Design of Chitosan Nanocapsules with Compritol 888 ATO® for Imiquimod Transdermal Administration. Evaluation of Their Skin Absorption by Raman Microscopy.

PURPOSE: Design imiquimod-loaded chitosan nanocapsules for transdermal delivery and evaluate the depth of imiquimod transdermal absorption as well as the kinetics of this absorption using Raman Microscopy, an innovative strategy to evaluate transdermal absorption. This nanovehicle included Compritol 888ATO®, a novel excipient for formulating nanosystems whose administration through the skin has not been studied until now. METHODS: Nanocapsules were made by solvent displacement method and their physicochemical properties was measured by DLS and laser-Doppler. For transdermal experiments, newborn pig skin was used. The Raman spectra were obtained using a laser excitation source at 532 nm and a 20/50X oil immersion objective. RESULTS: The designed nanocapsules, presented nanometric size (180 nm), a polydispersity index <0.2 and a zeta potential +17. The controlled release effect of Compritol was observed, with the finding that half of the drug was released at 24 h in comparison with control (p < 0.05). It was verified through Raman microscopy that imiquimod transdermal penetration is dynamic, the nanocapsules take around 50 min to penetrate the stratum corneum and 24 h after transdermal administration, the drug was in the inner layers of the skin. CONCLUSIONS: This study demonstrated the utility of Raman Microscopy to evaluate the drugs transdermal penetration of in the different layers of the skin. Graphical Abstract New imiquimod nanocapsules: evaluation of their skin absorption by Raman Microscopy and effect of the compritol 888ATO® in the imiquimod release profile.