Assessment of a fully-parametric thoraco-lumbar spine model generator with articulated ribcage.

The present paper describes a novel user-friendly fully-parametric thoraco-lumbar spine CAD model generator including the ribcage, based on 22 independent parameters (1 posterior vertebral body height per vertebra + 4 sagittal alignment parameters, namely pelvic incidence, sacral slope, L1-L5 lumbar lordosis, and T1-T12 thoracic kyphosis). Reliable third-order polynomial regression equations were implemented in Solidworks to analytically calculate 56 morphological dependent parameters and to automatically generate the spine CAD model based on primitive geometrical features. A standard spine CAD model, representing the case-study of an average healthy adult, was then created and positively assessed in terms of spinal anatomy, ribcage morphology, and sagittal profile. The immediate translation from CAD to FEM for relevant biomechanical analyses was successfully demonstrated, first, importing the CAD model into Abaqus, and then, iteratively calibrating the constitutive parameters of one lumbar and three thoracic FSUs, with particular interest on the hyperelastic material properties of the IVD, and the spinal and costo-vertebral ligaments. The credibility of the resulting lumbo-sacral and thoracic spine FEM with/without ribcage were assessed and validated throughout comparison with extensive in vitro and in vivo data both in terms of kinematics (range of motion) and dynamics (intradiscal pressure) either collected under pure bending moments and complex loading conditions (bending moments + axial compressive force).

Implantation Corridors in Canine Thoracic Vertebrae: A Morphometric Study in Dogs of Varying Sizes.

OBJECTIVE: Surgical stabilization to treat fractures, luxations, and congenital malformations in the thoracic spine can be difficult due to its unique anatomy and surrounding structures. Our objective was to document the morphometrics of the thoracic vertebrae relating to an ideal trajectory for dorsolateral implant placement in a variety of dog sizes and to assess proximity to important adjacent critical anatomical structures using computed tomography (CT) studies. STUDY DESIGN: Medical records for 30 dogs with thoracic CT were evaluated. Implantation corridor parameters for thoracic vertebrae (T1-T13) were measured, including the length, width, angle from midline, and allowable deviation angle for corridors simulated using an ideal implant trajectory. The distances from each vertebra to the trachea, lungs, aorta, subclavian artery, and azygos vein were also measured. RESULTS: Implantation corridor widths were often very narrow, particularly in the mid-thoracic region, and allowable deviation angles were frequently small. Distances to critical anatomical structures were often less than 1 mm, even in larger dogs. CONCLUSION: Thoracic implantation requires substantial precision to avoid breaching the canal, ineffective implant placement, and potential life-threatening complications resulting from invasion of surrounding anatomical structures.

Sexual dimorphism of the twelfth thoracic vertebra for sex determination in the Central Thai population.

Analyzing skeletal remains is crucial for identifying individuals, and forensic anthropologists use this analysis to determine biological characteristics, particularly sex, aiding criminal investigations. Among thoracic vertebrae, the twelfth thoracic vertebra (T12) is highly sexually dimorphic in various populations. This study aims to establish a discriminant function equation (DFE) for sex determination based on T12 in the Central Thai population. A total of 15 parameters of T12 were examined in 69 bone samples (43 males and 26 females). Among the 15 parameters, 14 were significantly different between males and females. The discriminant function equation (DFE) was generated as DFE = -19.578 + 0.376(i) BDsm + 0.254(l) PW + 0.081TDm, with a cutoff value of -0.296 for males and females, showing 92.8 % accuracy. The evaluation of the DFE using 10 blind samples showed 90 % accuracy. These findings may offer an additional method for sex determination through T12, complementing the examination of other skeletal elements.

Dataset of Finite Element Models of Normal and Deformed Thoracolumbar Spine.

Adult spine deformity (ASD) is prevalent and leads to a sagittal misalignment in the vertebral column. Computational methods, including Finite Element (FE) Models, have emerged as valuable tools for investigating the causes and treatment of ASD through biomechanical simulations. However, the process of generating personalised FE models is often complex and time-consuming. To address this challenge, we present a dataset of FE models with diverse spine morphologies that statistically represent real geometries from a cohort of patients. These models are generated using EOS images, which are utilized to reconstruct 3D surface spine models. Subsequently, a Statistical Shape Model (SSM) is constructed, enabling the adaptation of a FE hexahedral mesh template for both the bone and soft tissues of the spine through mesh morphing. The SSM deformation fields facilitate the personalization of the mean hexahedral FE model based on sagittal balance measurements. Ultimately, this new hexahedral SSM tool offers a means to generate a virtual cohort of 16807 thoracolumbar FE spine models, which are openly shared in a public repository.

Comparative finite element analysis of the first thoracic vertebra in artiodactyls.

Artiodactyls exhibit a striking diversity of the cervical vertebral column in terms of length and overall mobility. Using finite element analysis, this study explores the morphology at the cervico-thoracic boundary and its performance under loads in artiodactyls with different habitual neck postures and body sizes. The first thoracic vertebra of 36 species was loaded with (i) a compressive load on the vertebral body to model the weight of the head and neck exerted onto the trunk; and (ii) a tensile load at the spinous process to model the pull via the nuchal ligament. Additional focus was laid on the peculiar shape of the first thoracic vertebra in giraffes. We hypothesized that a habitually upright neck posture should be reflected in the greater ability to withstand compressive loads compared to tensile loads, whereas for species with a habitually suspended posture it should be the opposite. In comparison to species with a suspended posture, species with an upright posture exhibited lower stress (except Giraffidae). For compressive loads in larger species, stress surprisingly increased. Tensile loads in larger species resulted in decreased stress only in species with an intermediate or suspensory neck posture. High stress under tensile loads was mainly reflecting the relative length of the spinous process, while high stress under compressive loads was common in more "bell"-shaped vertebral bodies. The data supports a stability-mobility trade-off at the cervico-thoracic transition in giraffes. Performance under load at the cervico-thoracic boundary is indicative of habitual neck posture and is influenced by body size.

The Sima de los Huesos thorax and lumbar spine: Selected traits and state-of-the-art.

Information on the evolution of the thorax and lumbar spine in the genus Homo is hampered by a limited fossil record due to the inherent fragility of vertebrae and ribs. Neandertals show significant metric and morphological differences in these two anatomical regions, when compared to Homo sapiens. Thus, the important fossil record from the Middle Pleistocene site of Sima de los Huesos (SH) not only offers important information on the evolution of these anatomical regions within the Neandertal lineage but also provides important clues to understand the evolution of these regions at the genus level. We present the current knowledge of the costal skeleton, and the thoracic and lumbar spine anatomy of the hominins found in Sima de los Huesos compared to that of Neandertals and modern humans. The current SH fossil record comprises 738 vertebral specimens representing a minimum of 70 cervical, 95 thoracic and 47 lumbar vertebrae, 652 rib fragments representing a minimum of 118 ribs, and 26 sternal fragments representing 4 sterna. The SH hominins exhibit a morphological pattern in their thorax and lumbar spine more similar to that of Neandertals than to that of H. sapiens, which is consistent with the phylogenetic position of these hominins. However, there are some differences between the SH hominins and Neandertals in these anatomical regions, primarily in the orientation of the lumbar transverse processes and in the robusticity of the second ribs. The presence of some but not all of the suite of Neandertal-derived features is consistent with the pattern found in the cranium and other postcranial regions of this population.

Vertebral heart size and vertebral left atrial size reference ranges in healthy Miniature Schnauzers.

OBJECTIVE: The inclusion of vertebral heart score (VHS) and, more recently, the inclusion of the vertebral left atrial size (VLAS) in radiographic evaluation have become important screening tools for identifying dogs with occult cardiac disease. Several recent papers have shown there are interbreed variations in the VHS reference range. Our hypothesis is that the Miniature Schnauzer would also have a higher reference range for its VHS. ANIMALS: The electronic medical records of IDEXX Telemedicine Consultants were searched for Miniature Schnauzers undergoing thoracic radiographs between March 1, 2022, and February 28, 2023. METHODS: Dogs were included if they had 3 view thoracic radiographs performed and no evidence of cardiopulmonary disease was detected. Dogs with incomplete radiographic studies or cardiac or extracardiac disease were excluded. The VHS and VLAS measurements were performed by 2 board-certified cardiologists independent of one another. RESULTS: A total of 1,000 radiographs were obtained of which 272 were included for the study. The overall range for the VHS in this cohort was 9.68 to 12.07 with a median of 10.9. For VLAS measurements, a range of 1.71 to 2.4 was documented with a median of 2.0. CLINICAL RELEVANCE: The VHS for Miniature Schnauzers without cardiac disease was confirmed to be higher than the canine reference range.

CT anatomical study of extreme lateral interbody fusion in thoracic spine.

Extreme Lateral Interbody Fusion (XLIF) is currently used in the clinical treatment of thoracic spine disorders and has achieved desirable results. In this study, we selected CT images of the thoracic spine from 54 patients and divided the intervertebral spaces into six regions (A, I, II, III, IV, P) using the Moro method. We observed the adjacent relationships between the thoracic spine and surrounding tissues such as the scapula, esophagus, thoracic aorta, and superior vena cava. We made four main findings: firstly, when the scapulae were symmetrical on both sides, over 80% of patients had the T1-4 II-III region obstructed by the scapulae; secondly, when the esophagus was located on the left side of the vertebral body, 3.7% to 24.1% of patients had the T4-9 region located in the II-III zone; furthermore, when the thoracic aorta was on the left side of the vertebral body, over 80% of individuals in the T4-9 segment occupied the II-III region, with the values being 55.5% and 20.4% for T9/10 and T10/11, respectively; finally, the superior vena cava was located on the right side of the T4/5 vertebra, with 3.7% of individuals having it in the II-III region, while on the left side of T5-9, 3.7% to 18.5% of individuals had it in the II-III region. Based on these findings, we suggest that XLIF should not be performed on the T1-4 vertebrae due to scapular obstruction. Selecting the left-sided approach for XLIF in the T4-11 segments may risk injuring the thoracic aorta, esophagus, and superior vena cava, while the T11/12 segment is considered safe and feasible. Choosing the right-sided approach for XLIF may pose a risk of injuring the superior vena cava in the T4/5 segment, but it is safe and feasible in the T5-12 segments.

Morphometric description of thoracic vertebral pedicles in adult Malawian cadavers and implications for transpedicula spine fixation / Descripción morfometrica de los pedículos vertebrales torácicos en cadáveres de Malawi adultos e implicaciones para la fijación transpedicular de la columna

SUMMARY: Thoracic pedicles are important during the surgical repair of the thoracic spine deformities. Individuals show considerable differences in the asymmetric dimensions of the thoracic pedicles across populations. The purpose of this study was to determine the thoracic pedicle size and angle in adult Malawian cadavers and to suggest the clinical implications associated particularly the transpedicular fixation of spinal deformities. Adult thoracic vertebra from undetermined sex specimens (n=227) from the skeletal collection in the Anatomy Division, Biomedical Sciences Department, College of Medicine, University of Malawi were measured to assess the pedicle width, pedicle height, chord length, transverse diameter, interpedicular distance, transverse and sagittal pedicle angles. The mean pedicle width was 4.71 ± 1.83 mm (left side) and 4.82 ± 1.77 mm (right side) and the mean pedicle height was 12.63 ± 2.61 mm (left side) and 12.60 ± 2.54 mm (right side). The mean transverse pedicle angle was 12.22 ± 2.30 degrees (left side) and 12.46 ± 2.34 degrees (right side). The mean sagittal pedicle angle was 9.24 ± 2.67 degrees (left side) and 9.40 ± 2.76 degrees (right side). The mean interpedicular distance was 16.67 ± 2.23 mm. Our sample population generally showed smaller thoracic pedicle dimensions than those reported in other populations. Prior knowledge of the variations regarding the thoracic pedicle dimensions is vital for the determination of the pedicle screw size and design. Most importantly the information helps surgeons during preoperative planning of the transpedicular thoracic spine fixation and radiological interpretation.

RESUMEN: Los pedículos de las vértebras torácicas son importantes durante la reparación quirúrgica de las deformidades de la columna torácica. Los individuos muestran diferencias considerables en las dimensiones asimétricas de las vértebras torácicas entre poblaciones. El propósito de este estudio fue determinar el tamaño y el ángulo los pedículos de las vértebras torácicas en cadáveres de Malawi adultos y sugerir las implicaciones clínicas asociadas a la fijación transpedicular de las deformidades espinales. Se midieron 227 vértebras torácicas de muestras de individuos de sexo indeterminado de la colección esquelética en la División de Anatomía, Departamento de Ciencias Biomédicas, Facultad de Medicina, Universidad de Malawi para evaluar el ancho del pedículo, la altura del pedículo, la longitud, el diámetro transversal, distancia interpedicular y ángulos pediculares transversales y sagitales. El ancho medio del pedículo fue de 4,71 ± 1,83 mm (lado izquierdo) y 4,82 ± 1,77 mm (lado derecho) y la altura media del pedículo fue de 12,63 ± 2,61 mm (lado izquierdo) y 12,60 ± 2,54 mm (lado derecho). El ángulo pedicular transverso medio fue de 12,22 ± 2,3 grados (lado izquierdo) y 12,46 ± 2,34 grados (lado derecho). El ángulo pedicular sagital medio fue de 9,24 ± 2,67 grados (lado izquierdo) y 9,40 ± 2,76 grados (lado derecho). La distancia interpedicular media fue de 16,67 ± 2,23 mm. La población de esta muestra mostró dimensiones de los pedículos de las vértebras torácicas generalmente más pequeñas que las informadas en otras poblaciones. El conocimiento previo de las variaciones con respecto a las dimensiones de los pedículos de las vértebras torácicas es vital para la determinación del tamaño y diseño del tornillo pedicular. Lo más importante es que la información ayuda a los cirujanos durante la planificación preoperatoria para la fijación transpedicular de la columna torácica y su interpretación radiológica.

Anatomic measurement and clinical significance of the middle and lower thoracic segments in normal adults / Medición anatómica e importancia clínica de los segmentos torácico medio e inferior en adultos normales

Thoracic disc herniation (TDH) has high technical difficulty and serious complications, and the clinical anatomy of thoracic intervertebral foramen is less. Collecting 10 adult male cadavers, measuring the longitudinal diameter of the dorsal root ganglion (D1), the transverse diameter of the dorsal root ganglion (D2), horizontal sagittal diameter of the upper edge of the intervertebral disc (S1), the high of intervertebral foramen (H1), the height of articulationes costovertebrales (H2), the height of intervertebral disk (H3), the angel of the dorsal root ganglion (a). The aim of this study is to explore the safe area of middle and lower thoracic section and provide anatomical basis for the selection of operative cannula. Mastering the certain rules of the anatomical structure of the middle and lower thoracic segments, and referring to the above parameters in clinical, is conducive to the selection of the working casing during surgery.

La hernia de disco torácico (TDH) tiene una alta dificultad técnica y complicaciones graves, y la anatomía clínica del agujero intervertebral torácico es menor. Recolectando 10 cadáveres machos adultos, midiendo el diámetro longitudinal del ganglio de la raíz dorsal (D1), el diámetro transversal del ganglio de la raíz dorsal (D2), el diámetro sagital horizontal del borde superior del disco intervertebral (S1), el colmo del intervertebral agujero (H1), la altura de las articulaciones costovertebrales (H2), la altura del disco intervertebral (H3), el ángel del ganglio de la raíz dorsal (α). El objetivo de este estudio es explorar el área segura de la sección torácica media y baja y proporcionar una base anatómica para la selección de la cánula operatoria. Dominar ciertas reglas de la estructura anatómica de los segmentos torácicos medio e inferior, y referirse a los parámetros anteriores en clínica, es propicio para la selección de la carcasa de trabajo durante la cirugía.

Morphological evaluation of the thoracic, lumbar and sacral column of the giant anteater (Myrmecophaga tridactyla Linnaeus, 1758) / Avaliação morfológica da coluna torácica, lombar e sacral do tamanduá-bandeira (Myrmecophaga tridactyla Linnaeus, 1758)

This study aimed to describe the number of thoracic, lumbar and sacral vertebrae in tridactyla through radiographic examinations associated with gross anatomy determination. For this purpose, 12 adult specimens of M. tridactyla were analyzed, assigned to the Screening Center of Wild Animals (CETAS), IBAMA-GO, and approved by the Ethics Committee on the Use of Animals (Process CEUA-UFG nr 018/2014). In the radiographic examinations the following numbers of thoracic (T) and lumbar (L) vertebrae were observed: 16Tx2L (n=7), 15Tx2L (n=3), and 15Tx3L (n=2). In contrast, the numbers of vertebrae identified by anatomical dissection were as follows: 16Tx2L (n=4), 15Tx2L (n=3), and 15Tx3L (n=5). This difference occurred in cases of lumbarization of thoracic vertebrae, as seen in three specimens, and was explained by changes in regional innervations identified by anatomical dissection and the presence of floating ribs (right unilateral=1, left unilateral=1 and bilateral=1), which were not identified by radiographic exams. Regarding the sacral vertebrae there was no variation depending on the methods used, which allowed the identification of 4 (n=1) or 5 (n=11) vertebrae. Thus, we concluded that there is variation in the number of thoracic, lumbar and sacral vertebrae, in addition to lumbarization, which must be considered based on the presence of floating ribs, in this species.(AU)

Este estudo teve como objetivo descrever o número de vértebras torácicas, lombares e sacrais em Myrmecophaga tridactyla por meio de exames radiográficos e por contagem anatômica. Foram analisados ​​doze espécimes adultos de M. tridactyla oriundos do Centro de Triagem de Animais Silvestres (CETAS), IBAMA-GO, após aprovação pela Comissão de Ética no Uso de Animais (Processo CEUA-UFG no. 018/2014). Nos exames radiográficos, foram observados os seguintes números de vertebras torácicas (T) e lombares (L): 16Tx2L (n=7), 15Tx2L (n=3), e 15Tx3L (n=2). Em contraste, o número de vértebras identificados através de dissecção anatómica foram como se segue: 16Tx2L (n=4), 15Tx2L (n=3), e 15Tx3L (n=5). Essa diferença ocorreu em casos de lombarização da vertebra torácica, como visto em três exemplares e, foi explicada por mudanças nas inervações regionais identificadas por meio de dissecção anatômica e a presença de costelas flutuantes (unilateral direita=1, unilateral esquerda=1 e bilateral=1) que não foram identificados por meio de exame radiográfico. Em relação ao número de vértebras sacrais não houve variação dos métodos utilizados, sendo que ambos permitiram a identificação de quatro (n=1) ou 5 (n=11) vértebras. Assim, concluiu-se que há variação no número de vértebras torácicas, lombares e sacrais, devido à lombarização, que devem ser consideradas com base na presença de costelas flutuantes nesta espécie.(AU)

Bases ósseas e musculares do corte comercial de pescoço de jacaré-do-pantanal (Caimanyacare Daudin, 1802) / Bone and muscular bases of commercial cut from the neck of Yacare Caiman (Caiman yacare Daudin, 1802)

O jacaré-do-pantanal (Caiman yacare) é uma espécie abundante no ecossistema do Pantanal. Sua exploração comercial está regulamentada desde 1990 e se tornou um agronegócio em expansão. Para atender essa demanda, uma unidade processadora instalada em Mato Grosso, vem comercializando carne de jacaré em diferentes cortes, entre os quais o filé de dorso, oriundo do pescoço, nos últimos quatro anos. O objetivo desta pesquisa foi descrever os músculos e correspondentes bases ósseas desse corte. Para a descrição de ossos, utilizaram-se seis carcaças desossadas de exemplares juvenis de jacaré-do-pantanal, além de um exemplar adulto obtido após morte do animal, por doação, do Zoológico da UFMT. Os ossos foram macerados em água corrente, clareados com solução de água oxigenada a 10 volumes, e seus detalhes anatômicos foram descritos. Para descrever o músculo, 24 exemplares juvenis foram obtidos após abate e esfola, conservados em freezer e descongelados quando utilizados, sem qualquer fixação. Após a evisceração, foram dissecados em ambos os antímeros, para verificação de simetria de ocorrência, fixações musculares, relacões de sintopia, forma e arquitetura muscular. Verificou-se que a coluna cervical em C. yacare apresenta nove vértebras cervicais (VC), associadas com as respectivas costelas, que servem de base principal ao filé de dorso, que é constituído pela musculatura cervical, exceto os músculos intertransversais cervicais e intercostais cervicais externos.

The yacare Caiman (Caiman yacare) is an abundant species in the Pantanal ecosystem. Commercial exploitation was regulated in 1990 and has become a thriving business. In order to fulfill this demand, a processing plant settled in Mato Grosso state, Brazil, has been supplying for the last four years different cuts of Pantanal Caiman meat, including the "filé de dorso" (back sirloin) obtained from the neck. The aim of this study was to describe the muscles and corresponding bones related to this cut. To describe the bones, we used six boned carcasses from juvenile yacare Caiman, as well as an adult specimen obtained after animal death, by donation from the Federal University of Mato Grosso Zoo. The bones were macerated in water, bleached with 10 volume-hydrogen-peroxide solution, and their anatomical details were recorded. In order to describe the muscles, 24 juvenile specimens were obtained after slaughter and skinning, preserved in a freezer at -20oC, and thawed at the time of use, without any fixation. After evisceration, the specimens were dissected on both sides to verify symmetry of structures, muscle attachments, sintopy relations, shape, and muscular architecture. The cervical spine of C. yacare features nine cervical vertebrae (CV) associated to their ribs, serving as the main base for the back sirloin cut, which is formed by neck muscles, except for the intertransverse cervical and external intercostal cervical muscles.

Costal facet variations on the eighth, ninth and tenth thoracic vertebrae: association with sex and shifts in the cranio-caudal pattern of the human axial skeleton

Different variants of the ninth and tenth thoracic vertebrae are described in the literature with little information on their prevalence in human populations. To review this question, 5 osteological samples from different geographical areas were studied for the presence of costal facets on the eighth (T8), ninth (T9) and tenth (T10) thoracic vertebrae. We found that inferior costal facets on vertebral centrum were absent bilaterally in 1.5% of T8 and in 46% of T9; costal facets on both T10 transverse processes were absent in 39% of cases. Absence of inferior costal facets on the T8 and T9 centrum and costal facets on the T10 transverse processes was positively associated with cranial shifts at regional borders of the spine. However, additional analysis revealed that the position of the costo-central articulation at the level of T8 and T9 as well as the position of the most inferior "typical" thoracic vertebra significantly depended on sex (p<0.001). Sex differences were most pronounced at the level of T9 where females showed very frequent absence of inferior costal facets (76% of cases compared to 47% in males). This suggests a difference in an average 10th rib position in relation to the spine in females. Significant sex differences in the position of the most inferior "typical" thoracic vertebra may be partially explained by the fact that females in general are more likely to develop some forms of cranial shifts. However, according to the literature, the female axial skeleton possesses a complex of morphological features that is seen as an adaptation to pregnancy. In this view, the different position of the female 10th rib may be one component of the complex

No disponible

Estudo morfométrico do músculo latíssimo do dorso em fetos humanos / Morphometric study of the latissimus dorsi muscle in human fetuses

Introdução: O músculo latíssimo do dorso (MLD) é largo, triangular e realiza extensão, adução e rotação medial do braço. É vascularizado pelos vasos toracodorsais e ramos perfurantes das artérias intercostais posteriores e lombares, configurando retalho tipo V de Mathes e Nahai, de grande aplicabilidade em cirurgia plástica. O objetivo é analisar a morfometria e a vascularização do MLD em fetos humanos. Método: Dissecou-se a região axilar e o MLD de oito fetos humanos formolizados (três do sexo feminino e cinco do sexo masculino), entre 20 e 32 semanas gestacionais, em decúbito dorsal e abdução completa do braço. Mensuraram-se os comprimentos dos vasos subescapulares e toracodorsais, e foi realizada a morfometria do músculo. Resultados: Em todos os fetos, os vasos toracodorsais conferiram a vascularização primária do MLD. Em 25%, a veia subescapular era tributária direta da veia axilar; 25% dos casos apresentaram veia circunflexa da escápula dupla. O ramo para o músculo serrátil anterior foi único em todos os casos. Em 50% dos casos, o ramo angular da artéria toracodorsal foi visualizado e, em 25% deles, era proveniente do ramo para o músculo serrátil anterior. A distância entre a inserção do músculo e a entrada do pedículo neurovascular variou entre 1,1 e 1,9 cm em fetos de 21 e 26 semanas, respectivamente. Todos os fetos apresentaram a margem anterior do músculo na linha axilar média. Conclusão: A morfometria constante e a reduzida variação anatômica do pedículo vascular encontradas possibilitam a realização de pesquisas envolvendo o uso do MLD em reconstruções cirúrgicas intraútero.

Introduction: The latissimus dorsi muscle (LDM) is a flat triangular muscle which extends, adducts and draws the arm medially. Its blood supply is from the thoracodorsal vessels and the perforating branches of the posterior intercostal and lumbar arteries, therefore, it is a type V flap variety, which has great applicability in plastic surgery. This study aims to analyze the morphometry and the vascularization of MLD in human fetuses. Methods: The axillary region and LDM of eight human fetuses (3 females, 5 males), between 20 and 32 weeks of gestational ages, were dissected in supine position with complete abduction of the arm. The subscapular and thoracodorsal vessels lengths were measured and the morphology of the muscle was studied. Results: In all fetuses, the dominant vascular pedicle of LDM was the thoracodorsal vessels. In 25% of cases the subscapular vein was tributary of the axillary vein. Double circumflex scapular vein were found in 25% of the cases. In all fetuses, the serratus anterior branch was unique. In 50% of the cases the angular branch of the thoracodorsal artery was found, 25% of them were from the serratus anterior branch. The length between its insertion and the entry of the neurovascular pedicle was 1.1 to 1.9 cm in fetuses of 21 and 26 weeks, respectively. In all fetuses, the anterior border of the muscle was at the mid-axillary line. Conclusion: The constant morphometry and reduced anatomical variation of the vascular pedicle enables new studies regarding the use of LDM in surgical reconstructions in utero.

Anatomía y exploración física de la columna cervical y torácica / Anatomy and physical examination of the cervical and thoracic

La presente revisión brinda una pincelada sobre la anatomía cervical y torácica para introducir una metódica, adecuada y completa exploración física orientada tanto en el diagnóstico de las patologías más comunes, así como la detección de simuladores y otros casos de importancia médico legal...

Estudo morfométrico do corpo e forame vertebral das vértebras torácicas e lombares / Morphometric study of the vertebral body and vertebral foramen of the thoracic and lumbar vertebrae

Foi realizado estudo morfométrico das vértebras torácicas e lombares de 17 conjuntos de coluna vertebral, tendo sido selecionados parâmetros relacionados ao corpo vertebral (altura, diâmetro transversal e diâmetro sagital) e forame vertebral (diâmetro sagital e diâmetro transversal), que foram avaliados por meio de medida direta utilizando-se paquímetro. Para todos os parâmetros estudados foi observada a variaçäo de seus valores médios nos diferentes níveis da coluna torácica e lombar e também as variaçöes dos valores individuais dentro de cada nível. Os valores médios apresentaram um padräo de distribuiçäo ao longo da coluna vertebral, caracterizando a tendência individual dos parâmetros nos diferentes segmentos vertebrais, bem como as variaçöes individuais de cada coluna.

Estudo anatômico experimental em vértebras torácicas na determinação das medidas axiais e sagitais dos pedículos e angulações do parafuso-transpedicular pra fixação da coluna vertebral / Anatomical and experimental study in thoracic vertebrae for measuring the transversal and sagital pedicles and angulation of the transpedicular screws or fixation of the vertebral column

O trabalho tem por objetivo estabelecer, por meio experimental, medidas anatômicas axiais e sagitais dos pedículos e angulações de penetração do parafuso transpedicular na coluna torácica.O trabalho foi realizado no Departamento de Anatomia e Cirurgia Experimental da Facine/Uespi no período de março de 2000 a agosto de 2002. Foram utilizadas 09 colunas torácicas de cadáveres, submetidas a dissecção de ligamentos e músculos paravertebrais. As medidas foram realizadas no pedículo direito e utilizados parafusos que variaram de 4 a 8mm de espessura por 25 a 45mm de comprimento. Os parafusos transpediculares foram introduzidos nos corpos vertebrais. As vértebras com parafusos fixados foram radiografadas e em seguida fotografadas com câmera digital Mavica (MVC-FD7). As fotos das radiografias foram analisadas no programa de computador da UTHSCSA Image Tool for Windows version 2.00, onde foram obtidos: largura transversal, largura sagital do pedículo e o ângulo pedicular transversal e sagital de entrada do parafuso. Na coluna torácica, tanto a espessura transversal quanto a sagital do pedículo aumentado de T1 a T12 (transversal 8ñ0,5mm a 11ñ1,1mm e sagital 8 ñ0,4mm a 16 ñ 0,6mm respectivamente), a angulação com avaliação axial de entrada do parafuso diminuiu (T1=14§ /T12=5§) a angulação sagital do pedículo apresentou valores +2º para -5º na coluna superior, alcançando 10ºñ2º na porção média, e 4ºñ2º na parte inferior. Os resultados experimentais obtidos neste traabalho são de estrema importância para tornar o sistema de fixação da coluna torácica por parafusos transpediculares mais ágil, prático e seguro, beneficiando o paciente

Paraplejia secundaria a metástasis de un carcinoma folicular de Strumma ovarii / Secundary paraplegia a to metastasis of follicular carcinoma of ovarian struma

Se presenta el caso clínico de una paciente de 47 años de edad a la que dos años antes se les practicó histerectomía con salpingo-oforectomía bilateral por tumor ovárico reportado como un tumor de la granulosa. Acude nuevamente con cuadro de paraplejía secundaria a comprensión medular por fractura patológica de vértebra dorsal (T7-8). Se le practica laminectomía de la lesión vertebral osteolítica, la que se reporta como correspondiente a un carcinoma folicular de tiroides metastásico. Posteriormente es sometida a una tiroidectomía total, la pieza de esta ocasión se reportó como "glándula tiroidea normal". En busca de la lesión primaria se reexamina la pieza y laminillas de histerectomía, diagnosticándose un carcinoma folicular y struma ovarii. Es tratada con Iodo 131, recupera la motilidad y cinco años después se encuentra en perfectas condiciones, haciendo vida normal. Se hacen comentarios sobre dicha entidad