Your browser doesn't support javascript.
loading
Integration of Microfluidic Chip and Probe with a Dual Pump System for Measurement of Single Cells Transient Response.
Du, Xu; Kaneko, Shingo; Maruyama, Hisataka; Sugiura, Hirotaka; Tsujii, Masaru; Uozumi, Nobuyuki; Arai, Fumihito.
Afiliación
  • Du X; Department of Micro-Nano Mechanical Science and Engineering, Nagoya University, Nagoya 464-8603, Japan.
  • Kaneko S; Department of Mechanical Engineering, The University of Tokyo, Tokyo 113-8656, Japan.
  • Maruyama H; Department of Micro-Nano Mechanical Science and Engineering, Nagoya University, Nagoya 464-8603, Japan.
  • Sugiura H; Department of Mechanical Engineering, The University of Tokyo, Tokyo 113-8656, Japan.
  • Tsujii M; Department of Biomolecular Engineering, Graduate School of Engineering, Tohoku University, Sendai 980-8579, Japan.
  • Uozumi N; Department of Biomolecular Engineering, Graduate School of Engineering, Tohoku University, Sendai 980-8579, Japan.
  • Arai F; Department of Micro-Nano Mechanical Science and Engineering, Nagoya University, Nagoya 464-8603, Japan.
Micromachines (Basel) ; 14(6)2023 Jun 07.
Article en En | MEDLINE | ID: mdl-37374795
The integration of liquid exchange and microfluidic chips plays a critical role in the biomedical and biophysical fields as it enables the control of the extracellular environment and allows for the simultaneous stimulation and detection of single cells. In this study, we present a novel approach for measuring the transient response of single cells using a system integrated with a microfluidic chip and a probe with a dual pump. The system was composed of a probe with a dual pump system, a microfluidic chip, optical tweezers, an external manipulator, an external piezo actuator, etc. Particularly, we incorporated the probe with the dual pump to allow for high-speed liquid change, and the localized flow control enabled a low disturbance contact force detection of single cells on the chip. Using this system, we measured the transient response of the cell swelling against the osmotic shock with a very fine time resolution. To demonstrate the concept, we first designed the double-barreled pipette, which was assembled with two piezo pumps to achieve a probe with the dual pump system, allowing for simultaneous liquid injection and suction. The microfluidic chip with on-chip probes was fabricated, and the integrated force sensor was calibrated. Second, we characterized the performance of the probe with the dual pump system, and the effect of the analysis position and area of the liquid exchange time was investigated. In addition, we optimized the applied injection voltage to achieve a complete concentration change, and the average liquid exchange time was achieved at approximately 3.33 ms. Finally, we demonstrated that the force sensor was only subjected to minor disturbances during the liquid exchange. This system was utilized to measure the deformation and the reactive force of Synechocystis sp. strain PCC 6803 in osmotic shock, with an average response time of approximately 16.33 ms. This system reveals the transient response of compressed single cells under millisecond osmotic shock which has the potential to characterize the accurate physiological function of ion channels.
Palabras clave

Texto completo: 1 Banco de datos: MEDLINE Idioma: En Revista: Micromachines (Basel) Año: 2023 Tipo del documento: Article País de afiliación: Japón

Texto completo: 1 Banco de datos: MEDLINE Idioma: En Revista: Micromachines (Basel) Año: 2023 Tipo del documento: Article País de afiliación: Japón