Materials for the Recovery of Uranium from Seawater.

More than 1000× uranium exists in the oceans than exists in terrestrial ores. With nuclear power generation expected to increase over the coming decades, access to this unconventional reserve is a matter of energy security. With origins in the mid-1950s, materials have been developed for the selective recovery of seawater uranium for more than six decades, with a renewed interest in particular since 2010. This review comprehensively surveys materials developed from 2000-2016 for recovery of seawater uranium, in particular including recent developments in inorganic materials; polymer adsorbents and related research pertaining to amidoxime; and nanostructured materials such as metal-organic frameworks, porous-organic polymers, and mesoporous carbons. Challenges of performing reliable and reproducible uranium adsorption studies are also discussed, as well as the standardization of parameters necessary to ensure valid comparisons between different adsorbents.

Accelerating Membrane-based CO2 Separation by Soluble Nanoporous Polymer Networks Produced by Mechanochemical Oxidative Coupling.

Achieving homogeneous dispersion of nanoporous fillers within membrane architectures remains a great challenge for mixed-matrix membrane (MMMs) technology. Imparting solution processability of nanoporous materials would help advance the development of MMMs for membrane-based gas separations. A mechanochemically assisted oxidative coupling polymerization strategy was used to create a new family of soluble nanoporous polymer networks. The solid-state ball-milling method affords inherent molecular weight control over polymer growth and therefore provides unexpected solubility for the resulting nanoporous frameworks. MMM-based CO2 /CH4 separation performance was significantly accelerated by these new soluble fillers. We anticipate this facile method will facilitate new possibilities for the rational design and synthesis of soluble nanoporous polymer networks and promote their applications in membrane-based gas separations.

Postsynthetically Modified Covalent Organic Frameworks for Efficient and Effective Mercury Removal.

A key challenge in environmental remediation is the design of adsorbents bearing an abundance of accessible chelating sites with high affinity, to achieve both rapid uptake and high capacity for the contaminants. Herein, we demonstrate how two-dimensional covalent organic frameworks (COFs) with well-defined mesopore structures display the right combination of properties to serve as a scaffold for decorating coordination sites to create ideal adsorbents. The proof-of-concept design is illustrated by modifying sulfur derivatives on a newly designed vinyl-functionalized mesoporous COF (COF-V) via thiol-ene "click" reaction. Representatively, the material (COF-S-SH) synthesized by treating COF-V with 1,2-ethanedithiol exhibits high efficiency in removing mercury from aqueous solutions and the air, affording Hg2+ and Hg0 capacities of 1350 and 863 mg g-1, respectively, surpassing all those of thiol and thioether functionalized materials reported thus far. More significantly, COF-S-SH demonstrates an ultrahigh distribution coefficient value (Kd) of 2.3 × 109 mL g-1, which allows it to rapidly reduce the Hg2+ concentration from 5 ppm to less than 0.1 ppb, well below the acceptable limit in drinking water (2 ppb). We attribute the impressive performance to the synergistic effects arising from densely populated chelating groups with a strong binding ability within ordered mesopores that allow rapid diffusion of mercury species throughout the material. X-ray absorption fine structure (XAFS) spectroscopic studies revealed that each Hg is bound exclusively by two S via intramolecular cooperativity in COF-S-SH, further interpreting its excellent affinity. The results presented here thus reveal the exceptional potential of COFs for high-performance environmental remediation.

In Situ Doping Strategy for the Preparation of Conjugated Triazine Frameworks Displaying Efficient CO2 Capture Performance.

An in situ doping strategy has been developed for the generation of a novel family of hexaazatriphenylene-based conjugated triazine frameworks (CTFs) for efficient CO2 capture. The resulting task-specific materials exhibit an exceptionally high CO2 uptake capacity (up to 4.8 mmol g(-1) at 297 K and 1 bar). The synergistic effects of ultrananoporosity and rich N/O codoped CO2-philic sites bestow the framework with the highest CO2 adsorption capacity among known porous organic polymers (POPs). This innovative approach not only enables superior CO2 separation performance but also provides tunable control of surface features on POPs, thereby affording control over bulk material properties. We anticipate this novel strategy will facilitate new possibilities for the rational design and synthesis of nanoporous materials for carbon capture.

Robust and Porous ß-Diketiminate-Functionalized Metal-Organic Frameworks for Earth-Abundant-Metal-Catalyzed C-H Amination and Hydrogenation.

We have designed a strategy for postsynthesis installation of the ß-diketiminate (NacNac) functionality in a metal-organic framework (MOF) of UiO-topology. Metalation of the NacNac-MOF (I) with earth-abundant metal salts afforded the desired MOF-supported NacNac-M complexes (M = Fe, Cu, and Co) with coordination environments established by detailed EXAFS studies. The NacNac-Fe-MOF catalyst, I•Fe(Me), efficiently catalyzed the challenging intramolecular sp(3) C-H amination of a series of alkyl azides to afford α-substituted pyrrolidines. The NacNac-Cu-MOF catalyst, I•Cu(THF), was effective in promoting the intermolecular sp(3) C-H amination of cyclohexene using unprotected anilines to provide access to secondary amines in excellent selectivity. Finally, the NacNac-Co-MOF catalyst, I•Co(H), was used to catalyze alkene hydrogenation with turnover numbers (TONs) as high as 700,000. All of the NacNac-M-MOF catalysts were more effective than their analogous homogeneous catalysts and could be recycled and reused without a noticeable decrease in yield. The NacNac-MOFs thus provide a novel platform for engineering recyclable earth-abundant-element-based single-site solid catalysts for many important organic transformations.

Salicylaldimine-based metal-organic framework enabling highly active olefin hydrogenation with iron and cobalt catalysts.

A robust and porous Zr metal-organic framework, sal-MOF, of UiO topology was synthesized using a salicylaldimine (sal)-derived dicarboxylate bridging ligand. Postsynthetic metalation of sal-MOF with iron(II) or cobalt(II) chloride followed by treatment with NaBEt3H in THF resulted in Fe- and Co-functionalized MOFs (sal-M-MOF, M = Fe, Co) which are highly active solid catalysts for alkene hydrogenation. Impressively, sal-Fe-MOF displayed very high turnover numbers of up to 145000 and was recycled and reused more than 15 times. This work highlights the unique opportunity of developing MOF-based earth-abundant catalysts for sustainable chemical synthesis.

A metal-organic framework containing unusual eight-connected Zr-oxo secondary building units and orthogonal carboxylic acids for ultra-sensitive metal detection.

Two metal-organic frameworks (MOFs) with Zr-oxo secondary building units (SBUs) were prepared by using p,p'-terphenyldicarboxylate (TPDC) bridging ligands pre-functionalized with orthogonal succinic acid (MOF-1) and maleic acid groups (MOF-2). Single-crystal X-ray structure analysis of MOF-1 provides the first direct evidence for eight-connected SBUs in UiO-type MOFs. In contrast, MOF-2 contains twelve-connected SBUs as seen in the traditional UiO MOF topology. These structural assignments were confirmed by extended X-ray absorption fine structure (EXAFS) analysis. The highly porous MOF-1 is an excellent fluorescence sensor for metal ions with the detection limit of <0.5 ppb for Mn(2+) and three to four orders of magnitude greater sensitivity for metal ions than previously reported luminescent MOFs.

Novel dual-mode immunomagnetic method for studying reactivation of nerve agent-inhibited butyrylcholinesterase.

A novel immunomagnetic method has been developed for the simultaneous measurement of organophosphorus nerve agent (OPNA) adducts to butyrylcholinesterase (BuChE) and free OPNAs in serum. This new approach, deemed dual-mode immunomagnetic analysis (Dual-Mode IMA), combines immunomagnetic separation (IMS) and immunomagnetic scavenging (IMSc) and has been used to measure the effectiveness of cholinesterase reactivators on OPNA-inhibited BuChE in serum. BuChE inhibited by the nerve agent VX, uninhibited BuChE, and unbound VX were measured up to 1 h after the addition of oxime reactivators pralidoxime (2-PAM) and obidoxime. IMS experiments consisted of extracting BuChE and VX-BuChE serum adducts using antibutyrylcholinesterase monoclonal antibodies conjugated to protein-G ferromagnetic particles. In a parallel set of experiments using IMSc, BuChE-coated magnetic beads were used to extract free VX from protein-depleted serum. Adducts from both IMS and IMSc were analyzed using a published IMS liquid chromatography tandem mass spectrometry (IMS-LC-MS/MS) protocol, which has also been demonstrated with other OPNAs. By applying this Dual-Mode IMA approach, 2-PAM was observed to be more potent than obidoxime in reactivating VX-adducted BuChE. VX-BuChE peptide concentrations initially measured at 19.7 ± 0.7 ng/mL decreased over 1 h to 10.6 ± 0.6 ng/mL when reactivated with 2-PAM and 14.4 ± 1.2 ng/mL when reactivated with obidoxime. These experiments also show that previously published IMS-LC-MS/MS analyses are compatible with serum treated with oximes. Dual-Mode IMA is the first immunoaffinity method developed for the simultaneous measurement of OPNA adducted BuChE, unadducted BuChE, and free nerve agent in serum and is a promising new tool for studying reactivator effectiveness on cholinesterases inhibited by nerve agents.

Tuning amidoximate to enhance uranyl binding: a density functional theory study.

Amidoxime functionalized sorbents have shown great promise in extracting uranium from seawater, though the rationale for this affinity is not apparent. To enhance binding by amidoxime and to develop more selective sorbents, a detailed understanding of the electronic structure is necessary. This study investigates the electronic effects of amidoximate ligands bound to the uranyl cation, UO2(2+). Density functional theory calculations have been performed on a series of uranyl-amidoximate derivatives to investigate their structural, electronic, and thermochemical properties. The computational findings are in good agreement with available experimental data, with average error in bond length below 0.07 Å for all systems. Binding strength was observed to be directly related to electron donation, as evidenced by the plot of log(K/K0) vs the Hammett constant (σpara) of the substituent adjacent to the oximate function. From this observation, we propose and investigate two new imidazole-derived oximes, both of which possess greater binding strength than amidoximate derivatives.

High-throughput immunomagnetic scavenging technique for quantitative analysis of live VX nerve agent in water, hamburger, and soil matrixes.

We have developed a novel immunomagnetic scavenging technique for extracting cholinesterase inhibitors from aqueous matrixes using biological targeting and antibody-based extraction. The technique was characterized using the organophosphorus nerve agent VX. The limit of detection for VX in high-performance liquid chromatography (HPLC)-grade water, defined as the lowest calibrator concentration, was 25 pg/mL in a small, 500 µL sample. The method was characterized over the course of 22 sample sets containing calibrators, blanks, and quality control samples. Method precision, expressed as the mean relative standard deviation, was less than 9.2% for all calibrators. Quality control sample accuracy was 102% and 100% of the mean for VX spiked into HPLC-grade water at concentrations of 2.0 and 0.25 ng/mL, respectively. This method successfully was applied to aqueous extracts from soil, hamburger, and finished tap water spiked with VX. Recovery was 65%, 81%, and 100% from these matrixes, respectively. Biologically based extractions of organophosphorus compounds represent a new technique for sample extraction that provides an increase in extraction specificity and sensitivity.

A high-throughput diagnostic method for measuring human exposure to organophosphorus nerve agents.

An automated high-throughput immunomagnetic separation (IMS) method for diagnosing exposure to the organophosphorus nerve agents (OPNAs) sarin (GB), cyclohexylsarin (GF), VX, and Russian VX (RVX) was developed to increase sample processing capacity for emergency response applications. Diagnosis of exposure to OPNAs was based on the formation of OPNA adducts to butyrylcholinesterase (BuChE). Data reported with this method represent a ratio of the agent-specific BuChE adduct concentration, relative to the total BuChE peptide concentration that provides a nonactivity measurement expressed as percent adducted. All magnetic bead transfer steps and washes were performed using instrumentation in a 96-well format allowing for simultaneous extraction of 86 clinical samples plus reference materials. Automating extractions increased sample throughput 50-fold, as compared to a previously reported manual method. The limits of detection, determined using synthetic peptides, were 1 ng/mL for unadducted BuChE and GB-, GF-, VX-, and RVX-adducted BuChE. The automated method was characterized using unexposed serum and serum pools exposed to GB, GF, VX, or RVX. Variation for the measurement of percent adducted was <12% for all characterized quality control serum pools. Twenty-six (26) serum samples from individuals asymptomatic for cholinesterase inhibitor exposure were analyzed using this method, and no background levels of OPNA exposure were observed. Unexposed BuChE serum concentrations measured using this method ranged from 2.8 µg/mL to 10.6 µg/mL, with an average concentration of 6.4 µg/mL.

Scalable Formation of Diamine-Appended Metal-Organic Framework Hollow Fiber Sorbents for Postcombustion CO2 Capture.

We describe a straightforward and scalable fabrication of diamine-appended metal-organic framework (MOF)/polymer composite hollow fiber sorbent modules for CO2 capture from dilute streams, such as flue gas from natural gas combined cycle (NGCC) power plants. A specific Mg-MOF, Mg2(dobpdc) (dobpdc4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate), incorporated into poly(ether sulfone) (PES) is directly spun through a conventional "dry-jet, wet-quench" method. After phase separation, a cyclic diamine 2-(aminomethyl)piperidine (2-ampd) is infused into the MOF within the polymer matrix during postspinning solvent exchange. The MOF hollow fibers from direct spinning contain as high as 70% MOF in the total fibers with 98% of the pure MOF uptake. The resulting fibers exhibit a step isotherm and a "shock-wave-shock" breakthrough profile consistent with pure 2-ampd-Mg2(dobpdc). This work demonstrates a practical method for fabricating 2-ampd-Mg2(dobpdc) fiber sorbents that display the MOF's high CO2 adsorption capacity while lowering the pressure drop during operation.

Nanospace Decoration with Uranyl-Specific "Hooks" for Selective Uranium Extraction from Seawater with Ultrahigh Enrichment Index.

Mining uranium from seawater is highly desirable for sustaining the increasing demand for nuclear fuel; however, access to this unparalleled reserve has been limited by competitive adsorption of a wide variety of concentrated competitors, especially vanadium. Herein, we report the creation of a series of uranyl-specific "hooks" and the decoration of them into the nanospace of porous organic polymers to afford uranium nanotraps for seawater uranium extraction. Manipulating the relative distances and angles of amidoxime moieties in the ligands enabled the creation of uranyl-specific "hooks" that feature ultrahigh affinity and selective sequestration of uranium with a distribution coefficient threefold higher compared to that of vanadium, overcoming the long-term challenge of the competing adsorption of vanadium for uranium extraction from seawater. The optimized uranium nanotrap (2.5 mg) can extract more than one-third of the uranium in seawater (5 gallons), affording an enrichment index of 3836 and thus presenting a new benchmark for uranium adsorbent. Moreover, with improved selectivity, the uranium nanotraps could be regenerated using a mild base treatment. The synergistic combination of experimental and theoretical analyses in this study provides a mechanistic approach for optimizing the selectivity of chelators toward analytes of interest.

Capture of Iodine from Nuclear-Fuel-Reprocessing Off-Gas: Influence of Aging on a Reduced Silver Mordenite Adsorbent after Exposure to NO/NO2.

Iodine radioisotopes released during nuclear fuel reprocessing must be removed from the off-gas stream before discharge. One promising material for iodine capture is reduced silver mordenite (Ag0Z). Nevertheless, the adsorbent's capacity will degrade, or age, over time when the material is exposed to other off-gas constituents. Though the overall impact of aging is known, the underlying physical and chemical processes are not. To examine these processes, Ag0Z samples were prepared and aged in 2% NO2 in dry air and in 1% NO in N2 gas streams at 150 °C for up to six months. Aged samples were then characterized using scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and X-ray absorption spectroscopy. These techniques show that aging involves two overarching processes: (i) oxidation of the silver nanoparticles present in Ag0Z and (ii) migration of oxidized silver into the mordenite's inner network. Silver on the nanoparticle's surface is oxidized through adsorption of O2, NO, and NO2. Raman spectroscopy and X-ray absorption spectroscopy indicate that nitrates are the primary products of this adsorption. Most of these nitrates migrate into the interior of the mordenite and exchange at framework binding sites, returning silver to its unreduced state (AgZ). The remaining nitrates exist at a persistent concentration without aggregating into bulk-phase AgNO3. X-ray absorption spectroscopy results further indicate that iodine adsorption occurs on not just Ag0Z but also on AgZ and a portion of the nitrates in the system. AgZ adsorbs a sizable quantity of iodine early in the aging process, but its capacity drops rapidly over time. For well-aged samples, nitrates are responsible for up to 95% of mordenite's iodine capacity. These results have enhanced our understanding of the aging process in silver mordenite and are expected to guide the development of superior adsorbents for the capture of radioactive iodine from reprocessing off-gas.

Harnessing strong metal-support interactions via a reverse route.

Engineering strong metal-support interactions (SMSI) is an effective strategy for tuning structures and performances of supported metal catalysts but induces poor exposure of active sites. Here, we demonstrate a strong metal-support interaction via a reverse route (SMSIR) by starting from the final morphology of SMSI (fully-encapsulated core-shell structure) to obtain the intermediate state with desirable exposure of metal sites. Using core-shell nanoparticles (NPs) as a building block, the Pd-FeOx NPs are transformed into a porous yolk-shell structure along with the formation of SMSIR upon treatment under a reductive atmosphere. The final structure, denoted as Pd-Fe3O4-H, exhibits excellent catalytic performance in semi-hydrogenation of acetylene with 100% conversion and 85.1% selectivity to ethylene at 80 °C. Detailed electron microscopic and spectroscopic experiments coupled with computational modeling demonstrate that the compelling performance stems from the SMSIR, favoring the formation of surface hydrogen on Pd instead of hydride.

Design Strategies to Enhance Amidoxime Chelators for Uranium Recovery.

To move nuclear as a primary energy source, uranium resources must be secured beyond what terrestrial reserves can provide. Given the vast quantity of uranium naturally found in the ocean, adsorbent materials have been investigated to recover this vital fuel source. Amidoxime (AO) has been found to be the state-of-the-art functional group for this purpose, however, improvements must still be made to overcome the issues with selectively capturing uranium at such a low concentration found in the ocean. Herein, we report PAF-1 as a platform to study the effects of two amidoxime ligands. The synthesized adsorbents, PAF-1-CH2NHAO and PAF-1-NH(CH2)2AO, with varying chain lengths and grafting degrees, were investigated for their uranium uptakes and kinetic efficiency. PAF-1-NH(CH2)2AO was found to outperform PAF-1-CH2NHAO, with a maximum uptake capacity of 385 mg/g and able to reduce a uranium-spiked solution to ppb level within 10 min. Further studies with PAF-1-NH(CH2)2AO demonstrated effective elution for multiple adsorption cycles and showed promising results for uranium recovery in the diverse composition of a spiked seawater solution. The work presented here moves forward design principles for amidoxime-functionalized ligands and provides scope for strategies to enhance the capture of uranium as a sustainable nuclear fuel source.

Peroxide-treated metal-organic framework templated adsorbents for remediation of high level nuclear waste.

Remediation of legacy nuclear waste is one of the greatest challenges faced by the US Department of Energy, with projected cleanup efforts requiring over five decades and hundreds of billions of dollars. New materials are necessary to accelerate waste processing, achieving time and financial savings. Herein we report a peroxide treatment to a Ti metal-organic framework (MOF) and related MOF-templated adsorbents. The resulting materials displayed exceptional affinity for Am(III), achieving distribution coefficients in excess of 105 mL/g, and out-performing state-of-the-art benchmarks monosodium titanate (MST) and peroxo-treated modified MST (mMST) for removal of 85Sr(II) and 239, 240Pu(IV) from legacy nuclear waste simulant.

Engineering nanoporous organic frameworks to stabilize naked Au clusters: a charge modulation approach.

A simple charge modulation approach has been developed to stabilize naked Au clusters on a nanoporous conjugated organic network. Through engineering pore walls with regulated charges, the controllable growth of Au nanoclusters has been realized. The resulting supported catalyst exhibits excellent performance in the aerobic oxidation of alcohols.

Covalent Organic Frameworks as a Decorating Platform for Utilization and Affinity Enhancement of Chelating Sites for Radionuclide Sequestration.

The potential consequences of nuclear events and the complexity of nuclear waste management motivate the development of selective solid-phase sorbents to provide enhanced protection. Herein, it is shown that 2D covalent organic frameworks (COFs) with unique structures possess all the traits to be well suited as a platform for the deployment of highly efficient sorbents such that they exhibit remarkable performance, as demonstrated by uranium capture. The chelating groups laced on the open 1D channels exhibit exceptional accessibility, allowing significantly higher utilization efficiency. In addition, the 2D extended polygons packed closely in an eclipsed fashion bring chelating groups in adjacent layers parallel to each other, which may facilitate their cooperation, thereby leading to high affinity toward specific ions. As a result, the amidoxime-functionalized COFs far outperform their corresponding amorphous analogs in terms of adsorption capacities, kinetics, and affinities. Specifically, COF-TpAb-AO is able to reduce various uranium contaminated water samples from 1 ppm to less than 0.1 ppb within several minutes, well below the drinking water limit (30 ppb), as well as mine uranium from spiked seawater with an exceptionally high uptake capacity of 127 mg g-1 . These results delineate important synthetic advances toward the implementation of COFs in environmental remediation.

Bio-inspired nano-traps for uranium extraction from seawater and recovery from nuclear waste.

Nature can efficiently recognize specific ions by exerting second-sphere interactions onto well-folded protein scaffolds. However, a considerable challenge remains to artificially manipulate such affinity, while being cost-effective in managing immense amounts of water samples. Here, we propose an effective approach to regulate uranyl capture performance by creating bio-inspired nano-traps, illustrated by constructing chelating moieties into porous frameworks, where the binding motif's coordinative interaction towards uranyl is enhanced by introducing an assistant group, reminiscent of biological systems. Representatively, the porous framework bearing 2-aminobenzamidoxime is exceptional in sequestering high uranium concentrations with sufficient capacities (530 mg g-1) and trace quantities, including uranium in real seawater (4.36 mg g-1, triple the benchmark). Using a combination of spectroscopic, crystallographic, and theory calculation studies, it is revealed that the amino substituent assists in lowering the charge on uranyl in the complex and serves as a hydrogen bond acceptor, boosting the overall uranyl affinity of amidoxime.