Nano-encapsulation of vitamin D3 active metabolites for application in chemotherapy: formulation study and in vitro evaluation.

PURPOSE: Calcitriol (1,25-dihydroxyvitamin D3), the active metabolite of vitamin D3, is a potential anticancer agent but with high risk of hypercalcemia which limits the achievement of effective serum concentrations. Thus, calcitriol targeting delivery by nanoparticles may present a good solution. METHODS: Vitamin D3 active metabolites were encapsulated into polymeric nanoparticles and different formulation parameters were tested. The growth inhibitory efficiency of these nanoparticles was carried out in vitro on human breast adenocarinoma cells (MCF-7). RESULTS: Using cholecalciferol (the inactive metabolite), different polymer and oil ratios were compared to select nanoparticles presenting high encapsulation efficiency and sustained release profile. Calcidiol/calcitriol loaded nanoparticles had good encapsulation efficiencies (around 90%) associated with sustained releases over 7 days and enhanced stability. Moreover, loaded nanoparticles showed similar growth inhibition to non-encapsulated metabolites of vitamin D3 on day 4 and higher activities on days 7 and 10 after treatment initiation. CONCLUSION: The nano-encapsulation of vitamin D3 active metabolites may offer a new and potentially effective strategy for vitamin D3-based chemotherapy overcoming its actual limitations. The targeting delivery of vitamin D3 metabolites should be encouraged.

Negatively charged chitosan nanoparticles prepared by ionotropic gelation for encapsulation of positively charged proteins.

The nanoprecipitation of hydrogel nanoparticles by complex coacervation is investigated through a systematic study of the popular chitosan-polyphosphate pair of polyelectrolytes with opposite charges at pH 4. Polyphosphates of varying molar masses and electrical charges are investigated as alternatives to the commonly used tripolyphosphate, so as to assess the influence of the strength of electrostatic interactions on the fabrication possibility, the size of hydrogel particles, and their overall charge. Sodium hexametaphosphate and sodium polyphosphate allow the manufacture of such nanoparticles with either a positive or a negative charge, depending on the chitosan/polyphosphate ratio and the order of mixing. The classical way of mixing by pouring the polyphosphate solution into the chitosan solution yields microparticles. Inverting the order of mixing by pouring the chitosan solution into the polyphosphate solution allows the precipitation of negatively charged nanoparticles with diameters in the range 100-200 nm. Such charge inversion of the chitosan into negative is not possible with the common TPP. It was achieved using sodium hexametaphosphate and sodium polyphosphate having a larger negative charge. Charge inversion of chitosan allows an efficient encapsulation of positively charged proteins with an improved encapsulation efficiency than in the usual TPP-based coacervate. The encapsulation of the bovine serum albumin at pH 4 is given as a case study of a positively charged protein.

Development of an oral nanovaccine for dogs against Echinococcus granulosus.

Dogs are the main source of animal and human cystic echinococcosis caused by the Cestode parasite Echinococcus granulosus. Dog vaccination seems to be a good strategy to control this parasitic disease. Here we present the development of a polymeric nanoparticle-based oral vaccine for dogs against Echinococcus granulosus delivered in enteric-coated capsules. To achieve our target, we encapsulated two recombinant antigens into biodegradable polymeric nanoparticles in the presence of Monophosphoryl lipid A as an adjuvant to ensure efficient delivery and activation of a protective mucosal immune response. The formulated delivery system showed a nanoparticle size less than 200 nm with more than 80 % antigen encapsulation efficiency and conserved integrity and immunogenicity. The nanoparticle surface was coated with chitosan to enhance adhesion to the gut mucosa and a subsequent antigen delivery. Chitosan-coated nanoparticles showed a higher cell internalization in murine macrophages and dendritic cells as well as a higher penetration into Caco-2 cells in vitro. Antigen-loaded nanoparticles were freeze-dried and enteric-coated capsules were filled with the obtained powder. The obtained results show a promising nanoparticles delivery system for oral vaccination.

Hybrid core-shell particles for mRNA systemic delivery.

mRNA based infectious disease vaccines have opened the venue for development of novel nucleic acids-based therapeutics. For all mRNA therapeutics dedicated delivery systems are required, where different functionalities and targeting abilities need to be optimized for the respective applications. One option for advanced formulations with tailored properties are lipid-polymer hybrid nanoparticles with complex nanostructure, which allow to combine features of several already well described nucleic acid delivery systems. Here, we explored hyaluronic acid (HA) as coating of liposome-mRNA complexes (LRCs) to investigate effects of the coating on surface charge, physicochemical characteristics and biological activity. HA was electrostatically attached to positively charged complexes, forming hybrid LRCs (HLRCs). At different N/P ratios, physico-chemical characterization of the two sets of particles showed similarity in size (around 200 nm) and mRNA binding abilities, while the presence of the HA shell conferred a negative surface charge to otherwise positive complexes. High transfection efficiency of LRCs and HLRCs in vitro has been obtained in THP-1 and human monocytes derived from PBMC, an interesting target cell population for cancer and immune related pathologies. In mice, quantitative biodistribution of radiolabeled LRC and HLRC particles, coupled with bioluminescence studies to detect the protein translation sites, hinted towards both particles' accumulation in the hepatic reticuloendothelial system (RES). mRNA translated proteins though was found mainly in the spleen, a major source for immune cells, with preference for expression in macrophages. The results showed that surface modifications of liposome-mRNA complexes can be used to fine-tune nanoparticle physico-chemical characteristics. This provides a tool for assembly of stable and optimized nanoparticles, which are prerequisite for future therapeutic interventions using mRNA-based nanomedicines.

Imaging of Dysfunctional Elastogenesis in Atherosclerosis Using an Improved Gadolinium-Based Tetrameric MRI Probe Targeted to Tropoelastin.

Dysfunctional elastin turnover plays a major role in the progression of atherosclerotic plaques. Failure of tropoelastin cross-linking into mature elastin leads to the accumulation of tropoelastin within the growing plaque, increasing its instability. Here we present Gd4-TESMA, an MRI contrast agent specifically designed for molecular imaging of tropoelastin within plaques. Gd4-TESMA is a tetrameric probe composed of a tropoelastin-binding peptide (the VVGS-peptide) conjugated with four Gd(III)-DOTA-monoamide chelates. It shows a relaxivity per molecule of 34.0 ± 0.8 mM-1 s-1 (20 MHz, 298 K, pH 7.2), a good binding affinity to tropoelastin (KD = 41 ± 12 µM), and a serum half-life longer than 2 h. Gd4-TESMA accumulates specifically in atherosclerotic plaques in the ApoE-/- murine model of plaque progression, with 2 h persistence of contrast enhancement. As compared to the monomeric counterpart (Gd-TESMA), the tetrameric Gd4-TESMA probe shows a clear advantage regarding both sensitivity and imaging time window, allowing for a better characterization of atherosclerotic plaques.

Supersaturable self-microemulsifying delivery systems: an approach to enhance oral bioavailability of benzimidazole anticancer drugs.

This study explored the design of supersaturable self-microemulsifying drug delivery systems (S-SMEDDS) to address poor solubility and oral bioavailability of a novel benzimidazole derivative anticancer drug (BI). Firstly, self-microemulsifying drug delivery systems SMEDDS made of Miglyol® 812, Kolliphor® RH40, Transcutol® HP, and ethanol were prepared and loaded with the BI drug. Upon dispersion, the systems formed neutrally charged droplets of around 20 nm. However, drug precipitation was observed following incubation with simulated gastric fluid (pH 1.2). Aiming at reducing this precipitation and enhancing drug payload, supersaturable systems were then prepared by adding 1% hydroxypropyl cellulose as precipitation inhibitor. Supersaturable systems maintained a higher amount of drug in a supersaturated state in gastric medium compared with conventional formulations and were stable in simulated intestinal medium (pH 6.8). In vitro cell studies using Caco-2 cell line showed that these formulations reduced in a transient manner the transepithelial electrical resistance of the monolayers without toxicity. Accordingly, confocal images revealed that the systems accumulated at tight junctions after a 2 h exposure. In vivo pharmacokinetic studies carried out following oral administration of BI-loaded S-SMEDDS, SMEDDS, and free drug to healthy mice showed that supersaturable systems promoted drug absorption compared with the other formulations. Overall, these data highlight the potential of using the supersaturable approach as an alternative to conventional SMEDDS for improving oral systemic absorption of lipophilic drugs.

In vitro evaluations on canine monocyte-derived dendritic cells of a nanoparticles delivery system for vaccine antigen against Echinococcus granulosus.

Since dogs play a central role in the contamination of humans and livestock with Echinococcus granulosus, the development of an effective vaccine for dogs is essential to control the disease caused by this parasite. For this purpose, a formulation based on biodegradable polymeric nanoparticles (NPs) as delivery system of recombinant Echinococcus granulosus antigen (tropomyosin EgTrp) adjuved with monophosphoryl lipid A (MPLA) has been developed. The obtained nanoparticles had a size of approximately 200 nm in diameter into which the antigen was correctly preserved and encapsulated. The efficiency of this system to deliver the antigen was evaluated in vitro on canine monocyte-derived dendritic cells (cMoDCs) generated from peripheral blood monocytes. After 48 h of contact between the formulations and cMoDCs, we observed no toxic effect on the cells but a strong internalization of the NPs, probably through different pathways depending on the presence or not of MPLA. An evaluation of cMoDCs activation by flow cytometry showed a stronger expression of CD80, CD86, CD40 and MHCII by cells treated with any of the tested formulations or with LPS (positive control) in comparison to cells treated with PBS (negative control). A higher activation was observed for cells challenged with EgTrp-NPs-MPLA compared to EgTrp alone. Formulations with MPLA, even at low ratio of MPLA, give better results than formulations without MPLA, proving the importance of the adjuvant in the nanoparticles structure. Moreover, autologous T CD4+ cell proliferation observed in presence of cMoDCs challenged with EgTrp-NPs-MPLA was higher than those observed after challenged with EgTrp alone (p<0.05). These first results suggest that our formulation could be used as an antigen delivery system to targeting canine dendritic cells in the course of Echinococcus granulosus vaccine development.

Iodinated polymer nanoparticles as contrast agent for spectral photon counting computed tomography.

Suspensions of iodinated polymer nanoparticles are evaluated as contrast agent for Computed Tomography (CT) and Spectral Photon Counting Computed Tomography (SPCCT). Iodine containing moieties are grafted to poly(vinyl alcohol) by means of a covalent ester bond up to high degree of substitution of 0.77 providing high iodine content of 71 wt%. Polymer nanoparticles of 150 nm diameter stabilized by the block copolymer poly(caprolactone)-b-poly(ethylene glycol) are highly stable in water and human serum. High coverage of nanoparticles by PEG chains in a dense brush conformation (0.30 molecules·nm-2) provides resistance against fast elimination by mononuclear phagocytes system. Iodine concentration is increased up to 100 mg(i)·mL-1 by a centrifugation/redispersion step, which sets radiopacity of the contrast agent in the right range for imaging cardiovascular system and biodistribution. SPCCT 'Material Decomposition' and 'K-edge reconstruction' methods allow accurate quantification of iodine, as well as specific discrimination of iodine and gadolinium in mixed phantom samples. Intravenous injection of iodinated polymer nanoparticles to rats provides a clear visualization of the cardiovascular system over several hours followed by progressive accumulation in liver and spleen. This material is a 'blood pool' contrast agent with very long residence time in the blood stream.

Comparison of Three Processes for Parenteral Nanoemulsion Production: Ultrasounds, Microfluidizer, and Premix Membrane Emulsification.

Nanoemulsions are of great interest for pharmaceutical applications, including parenteral dosage forms. However, their production is still limited and requires more efficient and adaptive technologies. The more common systems are high-shear homogenization such as microfludizers at industrial scale and ultrasounds at research scale, both based on high energy, limiting their application for sensitive drugs. Recently a process based on premix membrane emulsification (PME) was developed to produce nanoemulsions. These 3 processes have been compared for the production of a model parenteral nanoemulsion containing all-trans retinoic acid, a thermolabile molecule that is used in the treatment of acute promyelocytic leukemia in a parenteral form. Droplet size and active integrity were studied because of their major interest for efficacy and safety assessment. Regarding droplet size, PME produced monodispersed droplets of 335 nm compared with the other processes that produced nanoemulsions of around 150 nm but with the presence of micron-size droplets detected by laser diffraction and optical microscopy. No real difference between the 3 processes was observed on active degradation during emulsifcation. However regarding stability, especially at 40°C, nanoemulsions obtained with the microfluidizer showed a greater molecule degradation and unstable nanoemulsion with a 4-times droplet size increase under stress conditions.

Polymeric nanocapsules as drug carriers for sustained anticancer activity of calcitriol in breast cancer cells.

Clinical use of calcitriol (1,25-dihydroxyvitamin D3) as an anticancer agent is currently limited by the requirement of supraphysiological doses and associated hypercalcemia. Nanoencapsulation of calcitriol is a strategy to overcome these drawbacks, allowing reduced administrated doses and/or frequency, while retaining the therapeutic activity towards cancer cells. For this purpose, we investigated the impact of calcitriol encapsulation on its antiproliferative activity and optimized formulation parameters with that respect. Calcitriol-loaded polymeric nanoparticles with different polymer:oil ratios were prepared by the nanoprecipitation method. Nanoparticles had similar mean size (200 nm) and EE (85%) whereas their release profile strongly depended on formulation parameters. Antiproliferative and cytotoxic activities of formulated calcitriol were evaluated in vitro using human breast adenocarcinoma cells (MCF-7) and showed that calcitriol-induced cell growth inhibition was closely related to its release kinetics. For the most suitable formulation, a sustained cell growth inhibition was observed over 10 days compared to free form. Advantages of calcitriol encapsulation and the role of formulation parameters on its biological activity in vitro were demonstrated. Selected nanoparticle formulation is a promising calcitriol delivery system ensuring a prolonged anticancer activity that could improve its therapeutic efficiency.

Microencapsulation of rifampicin for the prevention of endophthalmitis: In vitro release studies and antibacterial assessment.

Rifampicin encapsulated microparticles were designed for intraocular injection after cataract surgery to prevent postoperative endophthalmitis. Microparticles were formulated by emulsification diffusion method using poly(lactic acid-co-glycolic acid) (PLGA) as polymer in order to propose a new form of rifampicin that overcome its limitations in intraocular delivery. Depending on processing formulation, different types of microparticles were prepared, characterized and evaluated by in vitro release studies. Two types of microparticles were selected to get a burst release of rifampicin, to reach minimal inhibitory concentrations to inhibit 90% of Staphylococcus epidermidis mainly involved in postoperative endophthalmitis, combined with a sustained release to maintain rifampicin concentration over 24h. The antibacterial activity and antiadhesive property on intraocular lenses were evaluated on S. epidermidis. Microparticles, with a rapid rifampicin release profile, showed an effect towards bacteria development similar to free rifampicin over 48h. However, slow-release profile microparticles exhibited a similar antibacterial effect during the first 24h, and were able to destroy all the S epidermidis in the medium after 30h. The association of the two formulations allowed obtaining interesting antibacterial profile. Moreover, rifampicin-loaded microparticles have shown a very efficient anti-adherent effect of S. epidermidis on intraocular lenses at 24h. These results propose rifampicin microparticles as suitable for antibioprophylaxis of the postoperative endophthalmitis.

Antimicrobial nanocapsules: from new solvent-free process to in vitro efficiency.

Skin and mucosal infections constitute recurrent pathologies resulting from either inappropriate antiseptic procedures or a lack of efficacy of antimicrobial products. In this field, nanomaterials offer interesting antimicrobial properties (eg, long-lasting activity; intracellular and tissular penetration) as compared to conventional products. The aim of this work was to produce, by a new solvent-free process, a stable and easily freeze-dryable chlorhexidine-loaded polymeric nanocapsule (CHX-NC) suspension, and then to assess the antimicrobial properties of nanomaterials. The relevance of the process and the physicochemical properties of the CHX-NCs were examined by the assessment of encapsulation efficiency, stability of the nanomaterial suspension after 1 month of storage, and by analysis of granulometry and surface electric charge of nanocapsules. In vitro antimicrobial activities of the CHX-NCs and chlorhexidine digluconate solution were compared by measuring the inhibition diameters of two bacterial strains (Escherichia coli and Staphylococcus aureus) and one fungal strain (Candida albicans) cultured onto appropriate media. Based on the findings of this study, we report a new solvent-free process for the production of nanomaterials exhibiting antimicrobial activity, suitable stability, and easily incorporable as a new ingredient in various pharmaceutical products.

Development of a nanoparticle-based system for the delivery of retinoic acid into macrophages.

The aim of the present work is to prepare nanoparticulate systems that can target and modulate the functions of mononuclear phagocytes by local administration. All-trans retinoic acid (RA) was chosen as an immunomodulator to be encapsulated in biodegradable nanoparticles (NP). Different formulations were prepared by the nanoprecipitation method and poly(d,l)lactic acid based nanocapsules (NC) were selected to continue the study. RA-NC demonstrated a sustained release profile and an enhanced stability for 7 days. The uptake of fluorescent (NileRed) labeled NP was conducted on bone marrow derived macrophages (BMM) in vitro and xenograft glioma nude mice in vivo. Fluorescent microscopy observations and flow cytometry analysis demonstrated that NR-NC were engulfed by BMM in vitro and lasted inside over 7 days. The intratumoral injection of NR-NC confirmed that NC were efficiently uptaken by infiltrated macrophages. The effects of RA loaded NC on BMM were also evaluated by RT(2)-PCR array. Our results suggest that polymeric nanoparticles are suitable carriers to deliver RA into macrophages and can offer a new strategy in tumor macrophage-based treatment.