Assessment of the Efficacy and Bond Strength of Different Dentin-bonding Agents with Adhesives on Primary Teeth: An In Vitro Study.

AIM: The purpose of this study was to evaluate the effectiveness and strength of three various dentin-bonding agents used with adhesives on primary teeth. MATERIALS AND METHODS: The study used 80 recently extracted, healthy human maxillary anterior primary teeth that had undergone physiologic resorption, or over-retention. Teeth were cut to expose a flat dentin surface at a depth of 1.5 mm. All samples were divided into four groups (20 samples in each group) as follows: Group I-Control group, Group II-Primary teeth bonding with 6th-generation bonding agent, Group III-Primary teeth bonding with 7th-generation bonding agent, Group IV-Primary teeth bonding with 8th-generation bonding agent. All of the samples' dentinal surfaces were covered with composite resin using a Teflon mold after adhesive had been applied. A universal testing machine (INSTRON) was used to assess the shear bond strength. Data were collected and statistically analyzed. RESULTS: The maximum mean shear bond strength was found in 8th-generation bonding agent (30.76 ± 0.16), followed by 7th-generation bonding agent (26.08 ± 0.21), 6th-generation bonding agent (25.32 ± 0.06), and control group (6.18 ± 0.09). Statistically significant difference was found between the three different bonding agents (p < 0.001). CONCLUSION: On conclusion, the 8th-generation bonding agent demonstrated a greater shear bond strength to dentin than the 7th and 6th-generation bonding agent. CLINICAL SIGNIFICANCE: The emergence of different bonding techniques to the market improves the durability and quality of restorations. An effective bonding to the tooth would also reduce bacterial penetration, marginal microleakage, possibility of pulpal inflammation preserve tooth structure, and postoperative sensitivity by allowing less cavity preparation. How to cite this article: Alqarni AS, Al Ghwainem A. Assessment of the Efficacy and Bond Strength of Different Dentin-bonding Agents with Adhesives on Primary Teeth: An In Vitro Study. J Contemp Dent Pract 2024;25(4):342-345.

Comparative Assessment of Marginal Micro Leakage of Different Esthetic Restorative Materials Used on Primary Teeth: An In-vitro Study.

AIM: The aim of the current investigation was to evaluate the marginal microleakage of various esthetic restorative materials applied to primary teeth. MATERIALS AND METHODS: A total of 75 noncarious primary molars that were removed for orthodontic intervention and teeth nearing exfoliation were chosen. One millimeter (mm) above the cementoenamel junction, on the buccal surface of the teeth, Class V cavities were prepared. William's graded periodontal probe was used to standardize cavity preparation on all teeth. 3 mm was the cavity's length, 2 mm in width, and 2 mm in depth. The teeth were then divided into three groups (25 samples in each group) according to the type of esthetic restorative material used. Group I: Resin-modified glass ionomer cement, Group II: Ormocer, Group III: Giomer. The samples underwent 500 cycles of thermocycling, with an immersion time of 60 seconds and a well time of 15 seconds, between 5 and 55°C. The samples were submerged in methylene blue dye for 24 hours at room temperature and dried. The samples were then divided into sections and examined with a stereomicroscope. Data was recorded and statistically analyzed. RESULTS: The least marginal microleakage was found in the ormocer group (1.22 ± 0.01) followed by resin-modified glass ionomer cement group (1.31 ± 0.07) and the giomer group (1.78 ± 0.03). There was a highly statistically significant difference found between resin-modified glass ionomer cement group and the ormocer group, resin-modified glass ionomer cement group and giomer group. And no significant difference was found between the ormocer group and the giomer group. CONCLUSION: The present study concluded that there was some amount of microleakage in primary teeth in all restorative materials examined in this in-vitro investigation. However, the marginal sealing ability of ormocer was found highest compared to resin-modified glass ionomer cement and Giomer materials. CLINICAL SIGNIFICANCE: The primary reason dental restorations fail, particularly in Class V cavities, is microleakage since the margins of these restorations are typically found in the dentin or cementum. Assessing microleakage is a crucial step in determining the marginal integrity of restorative materials. Developing methods and resources that reduce the adverse effects caused by the restorative marginal seal failing would benefit from this. How to cite this article: Al Ghwainem A, Alqarni AS. Comparative Assessment of Marginal Micro Leakage of Different Esthetic Restorative Materials Used on Primary Teeth: An In-vitro Study. J Contemp Dent Pract 2024;25(1):58-61.

Assessment of Erosive Effect of Various Beverages on Esthetic Restorative Materials Used in Primary Teeth: An In Vitro Study.

AIM: The purpose of the current study was to evaluate the erosive impact of various beverages on the esthetic restorative materials utilized in primary teeth. MATERIALS AND METHODS: One hundred and twenty primary molars indicated for serial extraction or over-retention reason with sound buccal surfaces were collected. One millimeter above the cemento-enamel junction, standard Class V cavities were prepared. Following cavity preparation, all teeth were randomly assigned (20 samples per group for each beverage) to one of the three experimental groups based on the type of filling materials: group I: resin-modified glass ionomer cement (GC), group II: nanocomposite resin and group III nanohybrid ormocer-based composite. The samples were kept suspended in various containers containing 250 mL of each orange juice and cola at a temperature of 37°C for three hours per day and rest of day in distilled water. This procedure was repeated for 15 days. Using a 3D optical profilometer, a profilometric reading was recorded for each specimen. RESULTS: The minimum surface roughness was found in nanohybrid ormocer­based composite (1.816 ± 0.16 and 1.302 ± 0.08) followed by resin-modified glass ionomer cement (3.101 ± 0.12 and 2.946 ± 0.09) and nanocomposite resin (5.242 ± 0.20 and 4.488 ± 0.16) after immersed in the cola and orange juice, respectively. And there was a statistically significant difference found between the different esthetic restorative materials in both media. CONCLUSION: On conclusion, the current investigation demonstrates that when exposed to both beverages, the erosive effect was much lesser in nanohybrid ormocer-based composite, followed by resin-modified glass ionomer cement and nanocomposite resin. CLINICAL SIGNIFICANCE: Consuming high-calorie, low pH acidic foods and beverages such as carbonated beverages and fruit juices can lead to erosion, a frequent condition that results in irreparable damage to dental hard tissues and early deterioration of dental restorations.

Effects of Gingival Retraction Paste and Subsequent Cleaning with Hydrogen Peroxide on the Polymerization of Three Elastomeric Impression Materials: An In Vitro Study.

PURPOSE: It has been hypothesized that there are no effects of Expasyl and subsequent cleaning with hydrogen peroxide on polymerization of selected commonly used impression materials. Therefore, the aim of this study was to evaluate the effect of Expasyl paste on the polymerization of three impression materials with and without subsequent cleaning using 3% hydrogen peroxide (H2 O2 ). MATERIALS AND METHODS: Nine standardized stainless steel specimens were fabricated. One hundred and eighty impressions were made using 3 materials (60 each) as follows: group I: poly(vinyl siloxane) (PVS) (Virtual); group II: polyether (Monophase); group III: polyether (Impregum). Groups were subdivided into 3 categories: control without intervention (n = 20), pre-application of Expasyl and subsequent 1-minute washing with water and air-drying (n = 20), and pre-application of Expasyl and subsequent cleaning with 3% H2 O2 for 10 seconds (n = 20). All impressions were made by one operator using auto-mixing cartridges under standardized conditions at room temperature. Evaluation of the polymerization inhibition was blindly and independently performed by three practitioners with comparable experience using a visual scale. The observation was subjectively categorized as noninhibited or inhibited. Data were tabulated and analyzed using Fisher's exact test with significance level set at p ˂ 0.05. RESULTS: Significant differences were found between the control group and the impressions made after contamination with Expasyl (p < 0.001). Polymerization inhibition of PVS and Impregum was similar (in 85% and 90% of the specimens, respectively) when washed with water. There was a statistically significant reduction in polymerization inhibition in both upon cleaning with H2 O2 (p < 0.001); however, polymerization inhibition occurred in 100% of Monophase specimens when contaminated with Expasyl despite the washing technique used. CONCLUSIONS: Under these in vitro conditions, it can be concluded that the remnants of Expasyl on specimens caused a significant polymerization inhibition of the 3 impression materials tested. Subsequent cleaning with 3% H2 O2 significantly reduced this inhibitory effect on polymerization. Expasyl should not be used with Monophase polyether material.

Assessment of Two Different Obturation Systems in Primary Teeth: A Comparative Study.

Aim: The purpose of this study was to evaluate the efficacy of two distinct obturation techniques in primary teeth. Materials and Methods: For this investigation, 40 primary molar teeth were taken into consideration. Every sample underwent sample preparation. All teeth were evenly split into two groups: Group 1-obturation using the lentulospiral method and Group 2-obturation using the NaviTip method. The comparison between the two procedures was established through radiographic evaluation of the obturation quality and voids in the obturated canals. Results: In the lentulospiral method, 12 (60%) were optimal filling, 6 (30%) were underfilling, and 2 (10%) were overfilling. In the lentulo spiral method, 40% voids were present, and in the NaviTip method, 15% voids were present. Conclusion: The present study concluded that the NaviTip syringe method was sufficiently effective in regulating voids and yielded the best results for the apical seal, whereas the lentulo spiral approach generated the best results in terms of length of obturation.

Comparison of Cleaning Efficacy of Different Rotary Files in Primary Teeth-An In vitro Study.

Aim: The aim of the present study was to comparatively assess the cleansing efficiency of dissimilar rotary files in deciduous teeth. Materials and Methods: Forty-five deciduous anterior teeth that had been subjected to extraction were chosen for this research. The teeth were included if they had a minimum of 2/3rd undamaged root portions. Coronal entrée was completed using round diamond burs. All 45 samples were allocated at random to one of the following three groups: Group I: Control group in which the radicular canal was not subjected to any form of instrumentation, Group II: The radicular canal was subjected to instrumentation employing rotary ProTaper files, Group III: The radicular canal was subjected to instrumentation with rotary MTwo files. The samples were subjected to immersion in a succession of diluted ethyl alcohols to permit dehydration: With a change of solution every eight hours, the first 16 hours were spent in 70% alcohol, followed by eight hours in 80% alcohol, eight hours in 95% alcohol, and eight hours in 100% alcohol. The samples thus subjected to dehydration were cleared by immersion in methyl salicylate for six hours. Under a stereomicroscope with a 10x magnification, the root canals were examined by a person who was blinded to the groups in order to look for any traces of ink in the coronal, middle, and apical third of the canals. Results: In the control group, greater residual remains were present in the apical 3rd at 2.16 ± 0.08 followed by the coronal 3rd at 2.02 ± 0.14, and then in the middle 3rd at 1.88 ± 0.10. While using the ProTaper files, greater residual remains were present in the middle portion at 1.68 ± 0.16, followed by the coronal third at 0.94 ± 0.09, then the apical third at 0.98 ± 0.22. Greater residual remains were again noted with the MTwo files in the mid-portion at 1.44 ± 0.18, followed by the coronal part at 0.86 ± 0.10 and then the apical part at 0.82 ± 0.04. Differences among these groups were statistically significant with a P value < 0.001. Conclusion: The present study concluded that either of the file types used exhibited reasonably lower remnant score values in the apical third versus the middle/coronal thirds. Nonetheless, MTwo type files delineated superior capacity at removing debris versus the ProTaper file types at the apical level.

Evaluation of the Efficacy of Various Root Canal Irrigants on Removal of Smear Layer in Primary Teeth: A Comparative Study.

Aim: The aim of the current research was to appraise the effectiveness of different radicular canal irrigant solutions on the elimination of the smear layer in deciduous teeth. Materials and Methods: A total of 60 fit deciduous teeth that were subjected to extraction for a variety of curative reasons were employed in this research. Every sample tooth was subjected to decoronation at the CEJ employing a carborundum disk. A number 10 K-file (Dentsply Maillefer) was utilized to estimate the working length of the radicular canal using a manual technique by a sole operator in the step-back method. The specimens were allocated at random to one of the following three groups: Group 1: Irrigation using Saline, Group 2: Irrigation using 6% Citric acid, and Group 3: Irrigation using sodium hypochlorite. Following 24 h of storage, the sample teeth were subjected to vertical grooving using diamond suctioning discs beneath a high-power suction. All sections were subjected to staining using 1% methylene blue for 2 min before rinsing with 0.9% saline and allowed to bench dry. Rendering scores for the existence of a smear layer for the two halves of the split sample tooth were performed by visual inspection for the cervical, middle, plus apical one-third via a light stereomicroscope at 40× magnifying power. Results: With saline irrigation, the smear coat elimination at coronal one-third scored at 2.16 ± 0.11, 1.84 ± 0.06 at middle one-third, along with 1.92 ± 0.26 at the apical one-third. When 6% citric acid was employed as an irrigant, the scores were 0.72 ± 0.14 at coronal one-third, 0.84 ± 0.03 at middle one-third, and 0.90 ± 0.23 at apical one-third. When sodium hypochlorite was used as an irrigant, the mean score was 0.78 ± 0.12 at the coronal one-third, 0.92 ± 0.06 at the middle one-third, as well as 0.96 ± 0.18 at the apical one-third. The differences between the groups were statistically significant. Conclusion: The current in-vitro research arrived at a conclusion that 6% citric acid has the potential to eliminate smear coats in deciduous radicular canals when employed as a closing irrigant following instrumentation.

Evaluation of Microleakage of Stainless Steel Crowns and Pedo Jacket Crowns after Cementation With Different Luting Cements.

Aim: The present research was conducted to assess the microleakage of stainless steel crowns along with pedo jacket crowns following cementation with different luting cements. Materials and Methods: A total of 60 deciduous teeth subjected to extraction were employed in this in vitro research. These 60 specimens were randomly divided into two groups: Group I: Stainless steel crowns and Group II: Pedo Jacket crowns. Both crowns were subjected to cementation using self-cure resin-modified glass ionomer (RMGI) cement as well as by means of self-adhesive universal resin cement (RelyX luting cement). The specimens were subjected to storage in distilled water at 37°C for 24 h and were subjected to 500 thermal cycles between 5°C and 55°C using a dwell span of 30 s. Individual surfaces were assessed for the amount of dye infiltration at the boundaries by the side of the tooth-cement border beneath a stereomicroscope under 50× magnifying power. At the mesial and distal surfaces, the amount of microleakage was measured in micrometers (µm), and the mean value was computed for each sample. Results: Stainless steel crowns subject to cementation with RelyX luting cement exhibited the lowest microleakage (0.88 ± 0.78) versus self-cure RMGI cement (0.94 ± 0.78). There was no statistically significant difference found between the groups. Pedo Jacket crowns subject to cementation with RelyX luting cement exhibited the lowest microleakage (0.96. ± 0.32) while self-cure RMGI cement (1.83 ± 0.16) depicted the maximum microleakage. There was an extremely statistically noteworthy dissimilarity noted among the groups. Conclusion: The current research concluded that Pedo Jacket crowns subjected to cementation with RelyX luting cement can be regarded as an esthetically pleasing restorative alternative for numerous young patients. Applying RelyX luting cement to Pedo Jacket crowns provides a strong bolstering by composite materials that ensures the success of the therapy provided.

Papillon-Lefèvre syndrome: a series of five cases among siblings.

BACKGROUND: Papillon-Lefèvre syndrome is a rare autosomal recessive disorder characterized by palmoplantar hyperkeratosis and aggressively progressing periodontitis leading to premature loss of deciduous and permanent dentition. The etiopathogenesis of the syndrome is relatively obscure, and immunologic, genetic, or possible bacterial etiologies have been proposed. CASE PRESENTATION: A series of five cases of Papillon-Lefèvre syndrome among the siblings in a family is presented here: a 3-year-old Arab girl, a 4-year-old Arab boy, a 11-year-old Arab boy, a 12-year-old Arab boy, and a 14-year-old Arab boy. The patients presented with severe gingival inflammation and mobility of teeth. The clinical manifestations were typical of Papillon-Lefèvre syndrome and the degree of involvement of the oral and skin conditions varied among them. CONCLUSIONS: This case series stresses the consanguinity in the family as an etiologic factor. All siblings in the family were affected with Papillon-Lefèvre syndrome which makes this a rare case. A multidisciplinary approach with the active participation of a dental surgeon, dermatologist, and pediatrician is essential for the management of cases of Papillon-Lefèvre syndrome.