ABSTRACT
The isostructural region (Sn,Pb,Bi)Pt has been established over a wide range of the quasi-ternary section of the quaternary phase diagram. A synthesis protocol was developed, and single-phase compounds were thoroughly characterized, revealing linear relationships between the volume of the unit cell and the substitution degree for the NiAs type of crystal structure. Together with the already established (Pb,Bi)Pt series, the isostructural cut at 50 atom % Pt forms an ideal platform to independently investigate the influence of electronic and structural properties for physical and chemical applications, such as electrocatalysis. The three binary endmembers SnPt, PbPt, and BiPt are active materials in a variety of electrocatalytic oxidation and reduction reactions such as methanol oxidation and oxygen reduction, respectively. By gradual substitution, a fully independent tuning of interatomic distances and electronic densities can be achieved without altering the crystal structure. This unique adaptability is gated behind the requirement of extended homogeneity ranges of at least quaternary intermetallic compounds. Here, we present this new platform for systematic investigations in (electro) catalysis.
ABSTRACT
Efficient development of catalytic materials requires knowledge of the decisive parameters defining the catalytic properties. In multicomponent metallic catalysts, these are categorized as electronic and geometric effects, yet they are strongly interrelated. A systematic disentanglement can be achieved by fixing one parameter while altering the other, which becomes possible through the substitution in isostructural intermetallic compounds. This approach enables the evaluation of electronic or geometric contributions both individually and combined. Herein, this is achieved by substitution of indium (three valence electrons) with tin (four valence electrons) in the series In1-xSnxPd2, which allows for a systematic variation of the total number of electrons per unit cell with only a minor variation of the unit cell parameters and thus the evaluation of the electronic effect. Geometric effects were evaluated by substitution of indium with gallium in the Ga1-xInxPd2 series, which allows for a systematic variation of the interatomic distances while maintaining the same number of valence electrons per unit cell and close atomic coordinates. By substituting gallium with tin in the Ga1-xSnxPd2 series, both effects are combined and addressed simultaneously. The activity enhancement of the methanol oxidation reaction on the Ga1-xSnxPd2 series is attributed to the synergy of the combined effects.
ABSTRACT
Heterogeneous catalysts are often complex materials containing different compounds. While this can lead to highly beneficial interfaces, it is difficult to identify the role of single components. In methanol steam reforming (MSR), the interplay between intermetallic compounds, supporting oxides and redox reactions leads to highly active and CO2 -selective materials. Herein, the intrinsic catalytic properties of unsupported In3 Pt2 , In2 Pt, and In7 Pt3 as model systems for Pt/In2 O3 -based catalytic materials in MSR are addressed. In2 Pt was identified as the essential compound responsible for the reported excellent CO2 -selectivity of 99.5 % at 300 °C in supported systems, showing a CO2 -selectivity above 99 % even at 400 °C. Additionally, the partial oxidation of In7 Pt3 revealed that too much In2 O3 is detrimental for the catalytic properties. The study highlights the crucial role of intermetallic In-Pt compounds in Pt/In2 O3 materials with excellent CO2 -selectivity.
ABSTRACT
Ultrathin layers of oxides deposited on atomically flat metal surfaces have been shown to significantly influence the electronic structure of the underlying metal, which in turn alters the catalytic performance. Upscaling of the specifically designed architectures as required for technical utilization of the effect has yet not been achieved. Here, we apply liquid crystalline phases of fluorohectorite nanosheets to fabricate such architectures in bulk. Synthetic sodium fluorohectorite, a layered silicate, when immersed into water spontaneously and repulsively swells to produce nematic suspensions of individual negatively charged nanosheets separated to more than 60â nm, while retaining parallel orientation. Into these galleries oppositely charged palladium nanoparticles were intercalated whereupon the galleries collapse. Individual and separated Pd nanoparticles were thus captured and sandwiched between nanosheets. As suggested by the model systems, the resulting catalyst performed better in the oxidation of carbon monoxide than the same Pd nanoparticles supported on external surfaces of hectorite or on a conventional Al2 O3 support. XPS confirmed a shift of Pd 3d electrons to higher energies upon coverage of Pd nanoparticles with nanosheets to which we attribute the improved catalytic performance. DFT calculations showed increasing positive charge on Pd weakened CO adsorption and this way damped CO poisoning.
ABSTRACT
The front cover artwork is provided by the group of Prof. Armbrüster (TU Chemnitz). The image illustrates the determination of the chemical activity of elements in intermetallic compounds by corrosion-free EMF measurements. Read the full text of the Article at 10.1002/cphc.201901218.
ABSTRACT
Material development requires in many cases information about the necessary stability of the materials against oxidation, which is encoded in the chemical activity of the constituting elements. Determination of the chemical activity is tedious, especially for metallic materials at or close to ambient temperature. To determine the chemical activity of Zn at ambient temperature, electromotive force (EMF) measurements on the intermetallic compounds ZnPd, ZnPt and Cu5 Zn8 within their respective homogeneity range were conducted. The single-phase nature of the samples was confirmed by powder X-ray diffraction, light microscopy as well as SEM/EDX analysis. To exclude oxidation, and therefore faulty determination of the electrochemical potentials, a method was developed to conduct the electrochemical measurements under non-corrosive conditions in inert atmosphere. Corrosion by the electrolyte was avoided using anhydrous dimethylformamide as aprotic solvent. From the EMF the respective intrinsic activities of zinc in the corresponding intermetallic compounds was determined. Measurements on Cu5 Zn8 and comparison to available data in literature verified the developed method allowing to retrieve thermodynamic data of ZnPd and ZnPt for the first time at ambient temperature. The herein developed and easy-to-use methodology is applicable to a wide range of metallic material by choosing appropriate compositions of the electrolyte and has the potential to boost material development.
ABSTRACT
The large and vivid field of intermetallic compounds in catalysis is reviewed to identify necessities, strategies and new developments making use of the advantageous catalytic properties of intermetallic compounds. Since recent reviews summarizing contributions in heterogeneous catalysis as well as electrocatalysis are available, this contribution is not aiming at a comprehensive literature review. To introduce the field, first the interesting nature of intermetallic compounds is elaborated - including possibilities as well as requirements to address catalytic questions. Subsequently, this review focuses on exciting developments and example success stories of intermetallic compounds in catalysis. Since many of these are based on recent advances in synthesis, a short overview of synthesis and characterisation is included. Thus, this contribution aims to be an introduction to the newcomer as well as being helpful to the experienced researcher by summarising the different approaches. Selected examples from literature are chosen to illustrate the versatility of intermetallic compounds in heterogeneous catalysis where the emphasis is on developments since the last comprehensive review in the field.
ABSTRACT
The ethylene epoxidation is a challenging catalytic process, and development of active and selective catalyst requires profound understanding of its chemical behaviour under reaction conditions. The systematic study on intermetallic compounds in the Ca-Ag system under ethylene epoxidation conditions clearly shows that the character of the oxidation processes on the surface originates from the atomic interactions in the pristine compound. The Ag-rich compounds Ca2Ag7 and CaAg2 undergo oxidation towards fcc Ag and a complex Ca-based support, whereas equiatomic CaAg and the Ca-rich compounds Ca5Ag3 and Ca3Ag in bulk remain stable under harsh ethylene epoxidation conditions. For the latter presence of water vapour in the gas stream leads to noticeable corrosion. Combining the experimental results with the chemical bonding analysis and first-principles calculations, the relationships among the chemical nature of the compounds, their reactivity and catalytic performance towards epoxidation of ethylene are investigated.
ABSTRACT
The reactive metal-support interaction in the Cu-In2O3 system and its implications on the CO2 selectivity in methanol steam reforming (MSR) have been assessed using nanosized Cu particles on a powdered cubic In2O3 support. Reduction in hydrogen at 300 °C resulted in the formation of metallic Cu particles on In2O3. This system already represents a highly CO2-selective MSR catalyst with ~93% selectivity, but only 56% methanol conversion and a maximum H2 formation rate of 1.3 µmol gCu -1 s-1. After reduction at 400 °C, the system enters an In2O3-supported intermetallic compound state with Cu2In as the majority phase. Cu2In exhibits markedly different self-activating properties at equally pronounced CO2 selectivities between 92% and 94%. A methanol conversion improvement from roughly 64% to 84% accompanied by an increase in the maximum hydrogen formation rate from 1.8 to 3.8 µmol gCu -1 s-1 has been observed from the first to the fourth consecutive runs. The presented results directly show the prospective properties of a new class of Cu-based intermetallic materials, beneficially combining the MSR properties of the catalyst's constituents Cu and In2O3. In essence, the results also open up the pathway to in-depth development of potentially CO2-selective bulk intermetallic Cu-In compounds with well-defined stoichiometry in MSR.
ABSTRACT
The chemical behavior of CaAg as catalyst for ethylene epoxidation was studied using a combination of experimental (X-ray powder diffraction, scanning electron microscopy, thermal analysis and infrared spectroscopy), and quantum chemical techniques as well as real-space chemical bonding analysis. Under oxidative ethylene epoxidation conditions, the CaAg (010) surface possesses an outstanding stability during long-term experiments. It is caused by the formation of an ordered, stable and dense CaO passivation layer with a small amount of embedded Ag atoms. On this way, the (010) surface constitutes a kinetic barrier for further incorporation of oxygen into the subsurface region and thereby prevents further oxidative decomposition of CaAg. The calculated adsorption energies of the reaction species show strong adsorption of the reaction products that may explain the observed low conversion of ethylene toward ethylene oxide using CaAg as catalyst.
ABSTRACT
There is currently intense research on sulfur/carbon composite materials as positive electrodes for rechargeable batteries. Such composites are commonly prepared by ball milling or (melt/solution) impregnation to achieve intimate contact between both elements with the hope to improve battery performance. Herein, we report that sulfur shows an unexpected "spillover" effect when in contact with porous carbon materials under ambient conditions. When sulfur and porous carbon are gently mixed in a 1:1 mass ratio, complete surface coverage takes place within just a few days along with the loss of the sulfur bulk properties (crystallinity, melting point, Raman signals). Sulfur spillover also occurs in the presence of a liquid phase. Consequences of this phenomenon are discussed by considering a sodium-sulfur cell with a solid electrolyte membrane.
ABSTRACT
Intermetallic GaPd2 is a highly selective and stable catalyst for the semi-hydrogenation of acetylene. Knowledge of the underlying reaction kinetics is essential to gain a deeper understanding of the selective hydrogenation on this catalytic material. To date, there has been no experimental kinetic data published for this reaction on a well-defined intermetallic catalyst possessing isolated active sites. Kinetic measurements are performed at 140-200 °C, revealing an apparent activation energy of 29(2)â kJ mol-1 . GaPd2 is shown to be the first binary catalyst material, which shows a positive reaction order (0.89) with respect to acetylene at 200 °C. The influences on the extent of acetylene conversion, specific activity and selectivity to ethylene, ethane, and higher hydrocarbons are determined by a 24 factorial experiment following a design of experiments approach. Temperature and pressure have the strongest impact on these values. The results allow optimal operation for achieving high ethylene yields. A comparison of the reaction kinetics on GaPd2 with experimental results obtained for GaPd reveals different orders of reaction of H2 and C2 H2 on the two compounds.
ABSTRACT
The electron localizability indicator-an efficient quantum chemical tool for analysis of chemical bonding-is applied to unveil the chemical bonding behind the CO adsorption on the (1â¾ 1â¾ 1â¾ ) surface of the highly selective semi-hydrogenation catalyst GaPd. Refining the commonly applied Blyholder model, the obtained results are in excellent agreement with previous experimental and theoretical findings. The clean GaPd(1â¾ 1â¾ 1â¾ ) surface presents unshielded negatively charged Pd centers and positively charged Ga species partially shielded by dangling bonds. The CO molecule adsorbs on-top of the Pd centers perperdicular to the surface, while no CO-Ga interaction is observed. The chemical bonding analysis results in deep understanding, thus enabling a cost efficient route to innovative materials by reverse engineering.
ABSTRACT
The intermetallic compound ZnPd has demonstrated excellent catalytic properties in methanol steam reforming. While it is known that defects and microstructures influence the catalytic properties, little is known about the defects occurring in ZnPd. Due to recent advances in synthetic methods, coarse-grained ZnPd samples are accessible. This enables the detection and investigation of twinning in ZnPd by studying the twinned regions from the macroscopic scale by polarised light and electron backscattering diffraction (EBSD) down to the atomic scale by high-resolution transmission electron microscopy (HR-TEM). Twinning occurs in {101} and is coupled with a change in the c/a ratio in the vicinity of the twin boundary. Quantum chemical calculations result in only very small energy differences between the ideal and the twinned structure, explaining the experimentally observed thermal stability of the latter. The chemical bonding was investigated by the electron localizability indicator (ELI) and compared to the one in the ideal structure. The results confirm twinning along the {101} plane and demonstrate the high stability of the twin boundaries after formation.
ABSTRACT
Intermetallic compounds are a promising class of materials as stable and selective heterogeneous catalysts. Here, the (111) and (-1-1-1) single crystal surfaces of the PdGa intermetallic compound were studied as model catalysts with regard to the selective hydrogenation of acetylene (C2H2) to ethylene (C2H4). The distinct atomic surface structures exhibit isolated active centers of single atomic and three atomic Pd ensembles, respectively. For the two prototypal model catalyst surfaces, the adsorption sites and configurations for hydrogen (H2), acetylene, and ethylene were investigated by combining scanning tunneling microscopy, temperature-programmed desorption, and ab initio modeling. The topmost Pd surface atoms provide the preferred adsorption sites for all studied molecules. The structural difference of the Pd ensembles has a significant influence on the adsorption energy and configuration of C2H2, while the influence of the ensemble structure is weak for C2H4 and H2 adsorption. To approach the question of catalytic performance, we simulated the reaction pathways for the heterogeneous catalytic hydrogenation of acetylene on the two surfaces by means of density functional theory. Due to the geometrical separation of the Pd sites on the surfaces, the steric approach of the reactants (H and C2Hx) was found to be of importance to the energetics of the reaction. The presented study gives a direct comparison of binding properties of catalytic Pd on-top sites vs three-fold Pd hollow sites and is therefore of major relevance to the knowledge-based design of highly selective hydrogenation catalysts.
Subject(s)
Acetylene/chemistry , Alloys/chemistry , Ethylenes/chemical synthesis , Adsorption , Catalysis , Ethylenes/chemistry , Gallium/chemistry , Hydrogenation , Palladium/chemistry , Particle Size , Quantum Theory , Surface PropertiesABSTRACT
The application of intermetallic compounds for understanding in heterogeneous catalysis developed in an excellent way during the last decade. This review provides an overview of concepts and developments revealing the potential of intermetallic compounds in fundamental as well as applied catalysis research. Intermetallic compounds may be considered as platform materials to address current and future catalytic challenges, e.g. in respect to the energy transition.
ABSTRACT
This study demonstrates the use of 1,5-naphthalenedisulfonic acid as a suitable building block for the efficient and economic preparation of alternating sulfonated polyphenylenes with high ion-exchange capacity (IEC) via Suzuki polycondensation. Key to large molar masses is the use of an all-meta-terphenyl comonomer instead of m-phenyl, the latter giving low molar masses and brittle materials. A protection/deprotection strategy for base-stable neopentyl sulfonates is successfully implemented to improve the solubility and molar mass of the polymers. Solution-based deprotection of polyphenylene neopentyl sulfonates at 150 °C in dimethylacetamide eliminates isopentylene quantitatively, resulting in membranes with high IEC (2.93 mequiv/g) and high proton conductivity (σ = 138 mS/cm). Water solubility of these copolymers with high IEC requires thermal cross-linking to prevent their dissolution under operating conditions. By balancing the temperature and time of the cross-linking process, water uptake can be restricted to 50 wt %, retaining an IEC of 2.33 mequiv/g and a conductivity of 85 mS/cm. Chemical stability is addressed by treatment of the membranes under Fenton's conditions and by considering barrier heights for desulfonation using density functional theory (DFT) calculations. The DFT results suggest that 1,5-disulfonated naphthalenes are at least as stable as sulfonated polyphenylenes against desulfonation.
ABSTRACT
Quaternary (Sn,Pb,Bi)Pt was synthesized by melting of the elements in an evacuated silica glass ampoule. The crystal structure was established by single-crystal X-ray diffraction and adopts an atomic arrangement of the NiAs type with additional occupation of the voids. Decisive for the refinement was the composition of the crystals as determined by energy dispersive X-ray spectroscopy (EDXS), resulting in a formula of (Sn0.15Pb0.54Bi0.31)Pt.
ABSTRACT
High-entropy alloys (HEAs), as new heterogeneous catalytic materials, possess remarkable catalytic performance in numerous reactions. However, rational and controllable synthesis of these complex structures remains a challenge. In this work, bulk and carbon nanotube (CNT)-supported ultrasmall PtFeCoNiCu HEA nanoparticles with an average particle size of 1.58 nm are prepared by lithium naphthalenide-driven reduction under mild conditions. The supported PtFeCoNiCu/CNT catalyst exhibits high catalytic activity in the aqueous-phase hydrogenation of maleic anhydride to succinic acid with a selectivity of 98% at full conversion of maleic acid (the hydrolysis product of maleic anhydride), a low apparent activation energy (Ea = 49 kJ mol-1), and excellent stability. Moreover, a much higher mass-specific activity of Pt in the catalyst is displayed over PtFeCoNiCu/CNT (1515.4 mmolmaleic acid gPt-1 h-1) than that of 5 wt % Pt/CNT (388.0 mmolmaleic acid gPt-1 h-1). This work provides a strong support for HEAs as advanced heterogeneous catalysts and will be of great significance for promoting the research and application of HEAs in the field of selective hydrogenation.