Coiled-Coil-Based Biofunctionalization of 100 nm Gold Nanoparticles with the Trastuzumab Antibody for the Detection of HER2-Positive Cancer Cells.

We compared different biofunctionalization strategies for immobilizing trastuzumab, an IgG targeting the HER2 biomarker, onto 100 nm spherical gold nanoparticles because of the E/K coiled-coil peptide heterodimer. First, Kcoil peptides were grafted onto the gold surface while their Ecoil partners were genetically encoded at the C-terminus of trastuzumab's Fc region, allowing for a strong and specific interaction between the antibodies and the nanoparticles. Gold nanoparticles with no Kcoil peptides on their surface were also produced to immobilize Ecoil-tagged trastuzumab antibodies via the specific adsorption of their negatively charged Ecoil tags on the positively charged gold surface. Finally, the nonspecific adsorption of wild-type trastuzumab on the gold surface was also assessed, with and without Kcoil peptides grafted on it beforehand. We developed a thorough workflow to systematically compare the immobilization strategies regarding the stability of nanoparticles, antibody coverage, and ability to specifically bind to HER2-positive breast cancer cells. All nanoparticles were highly monodisperse and retained their localized surface plasmon resonance properties after biofunctionalization. A significant increase in the amount of immobilized antibodies was observed with the two oriented coil-based strategies compared to nonspecific adsorption. Finally, all biofunctionalization strategies allowed for the detection of HER2-positive breast cancer cells, but among the investigated approaches, we recommend using the E/K coiled-coil-based strategy for gold nanoparticle biofunctionalization because it allows for the qualitative and quantitative detection of HER2-positive cells with a higher contrast compared to HER2-negative cells.

Functionalized Nanogels with Endothelin-1 and Bradykinin Receptor Antagonist Peptides Decrease Inflammatory and Cartilage Degradation Markers of Osteoarthritis in a Horse Organoid Model of Cartilage.

Osteoarthritis (OA) is a degenerative and heterogeneous disease that affects all types of joint structures. Current clinical treatments are only symptomatic and do not manage the degenerative process in animals or humans. One of the new orthobiological treatment strategies being developed to treat OA is the use of drug delivery systems (DDS) to release bioactive molecules over a long period of time directly into the joint to limit inflammation, control pain, and reduce cartilage degradation. Two vasoactive peptides, endothelin-1 and bradykinin, play important roles in OA pathogenesis. In this study, we investigated the effects of two functionalized nanogels as DDS. We assessed the effect of chitosan functionalized with a type A endothelin receptor antagonist (BQ-123-CHI) and/or hyaluronic acid functionalized with a type B1 bradykinin receptor antagonist (R-954-HA). The biocompatibility of these nanogels, alone or in combination, was first validated on equine articular chondrocytes cultured under different oxic conditions. Further, in an OA equine organoid model via induction with interleukin-1 beta (IL-1ß), a combination of BQ-123-CHI and R-954-HA (BR5) triggered the greatest decrease in inflammatory and catabolic markers. In basal and OA conditions, BQ-123-CHI alone or in equimolar combinations with R-954-HA had weak pro-anabolic effects on collagens synthesis. These new nanogels, as part of a composite DDS, show promising attributes for treating OA.

Plasmon-Free Polymeric Nanowrinkled Substrates for Surface-Enhanced Raman Spectroscopy of Two-Dimensional Materials.

We report plasmon-free polymeric nanowrinkled substrates for surface-enhanced Raman spectroscopy (SERS). Our simple, rapid, and cost-effective fabrication method involves depositing a poly(ethylene glycol)diacrylate (PEGDA) prepolymer solution droplet on a fully polymerized, flat PEGDA substrate, followed by drying the droplet at room conditions and plasma treatment, which polymerizes the deposited layer. The thin polymer layer buckles under axial stress during plasma treatment due to its different mechanical properties from the underlying soft substrate, creating hierarchical wrinkled patterns. We demonstrate the variation of the wrinkling wavelength with the drying polymer molecular weight and concentration (direct relations are observed). A transition between micron to nanosized wrinkles is observed at 5 v % concentration of the lower molecular-weight polymer solution (PEGDA Mn 250). The wrinkled substrates are observed to be reproducible, stable (at room conditions), and, especially, homogeneous at and below the transition regime, where nanowrinkles dominate, making them suitable candidates for SERS. As a proof-of-concept, the enhanced SERS performance of micro/nanowrinkled surfaces in detecting graphene and hexagonal boron nitride (h-BN) is illustrated. Compared to the SiO2/Si surfaces, the wrinkled PEGDA substrates significantly enhanced the signature Raman band intensities of graphene and h-BN by a factor of 8 and 50, respectively.

Superlubricity of Zwitterionic Bottlebrush Polymers in the Presence of Multivalent Ions.

In this study, we report lubrication properties of physisorbed zwitterionic bottlebrush polymers in the presence of multivalent ions using the surface force apparatus. Unlike polyelectrolyte brushes, the lubrication properties of which diminish drastically in the presence of multivalent ions at concentrations as low as 0.1 mM, zwitterionic bottlebrush polymers exhibit friction coefficients as low as ∼10-3 at such concentrations of multivalent ions up to intermediate normal loads. This lubrication ability persists until surface wear occurs at high normal loads. The surface wear is demonstrated to be triggered by the multivalent ions bridging the polymer chains and dehydrating the zwitterionic moieties. Finally, the analysis of the polymer film stability suggests that the partial desorption of polymers in the presence of the ions does not affect the lubrication performance. Therefore, even in the physisorbed state, zwitterionic brushes perform significantly better than covalently grafted polyelectrolyte brushes in the presence of multivalent ions.

GM1-Binding Conjugates To Improve Intestinal Permeability.

Drugs and proteins with poor intestinal permeability have a limited oral bioavailability. To remediate this problem, a receptor-mediated endocytosis and transcytosis approach was explored. Indeed, the nontoxic ß subunit of cholera toxin (CTB) can cross the intestinal barrier by binding to receptor GM1. In this study, we explored the use of GM1-binding peptides and CTB as potential covalent carriers of poorly permeable molecules. GM1-binding peptides (G23, P3) and CTB were conjugated to poorly permeable fluorescent probes such as fluorescein isothiocyanate (FITC) and albumin-FITC using triethylene glycol spacers and click chemistry. The affinity of the peptide conjugates with receptor GM1 was confirmed by isothermal titration calorimetry or microscale thermophoresis, and the results suggested the involvement of nonspecific interactions. Conjugating the model drugs to G23 and P3 improved the internalization into Caco-2 and T84 cells, although the process was not dependent on the amount of GM1 receptor. However, conjugation of bovine serum albumin FITC to CTB increased the internalization in the same cells in a GM1-dependent pathway. Peptide conjugates demonstrated a limited permeability through a Caco-2 monolayer, whereas G23 and CTB conjugates slightly enhanced permeability through a T84 cell monolayer compared to model drugs alone. Since CTB can improve the permeability of large macromolecules such as albumin, it is an interesting carrier for the improvement of oral bioavailability of various other macromolecules such as heparins, proteins, and siRNAs.

Interfacial Forces across Ionic Liquid Solutions: Effects of Ion Concentration and Water Domains †.

Using the surface force apparatus (SFA), the interaction forces between mica surfaces across ionic liquid (IL) solutions are studied. The IL solution, 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide in propylene carbonate solvent, is used at different concentrations to elucidate the ions' conformation at the interface from the analysis of short-range structural forces. A direct correlation between the ion layer thickness at the interface and the IL molar fraction in the solution is observed, suggesting conformational changes relative to the ion packing density. In addition, effects of large microscopic and macroscopic water domains at the interface are investigated. The microscopic water domains induced significant adhesion at contact because of the long-range capillary forces, which are found to depend on solvent concentration. The macroscopic water domains entirely cover the interaction area, ensuring that the long-range interfacial interactions occur entirely across the aqueous electrolyte solution with dissolved IL ions as the electrolyte. These results help elucidate the interfacial interactions in IL-charged solid interfaces with practical importance in green energy storage, catalysis, and lubrication.

Synergy between Zwitterionic Polymers and Hyaluronic Acid Enhances Antifouling Performance.

Challenges associated with nonspecific adsorption of proteins on sensor surfaces have steered the development of novel antifouling materials and strategies. Inspired by human synovial fluid composition and structure, we designed synergistic antifouling coatings with mixtures of hyaluronic acid (HA) and a zwitterionic bottlebrush polymer (BB). Using a fast and convenient online surface modification method, the polymers were immobilized on the Au surface, significantly increasing its hydrophilicity. Using surface plasmon resonance (SPR), a 10:1 ratio of HA to BB was found optimal to provide the best antifouling performance. Bovine serum albumin (BSA) adsorption on HA-BB coated surfaces was 0.2 ng/cm2, which was 60 times lower than BB or HA alone and 25 times lower than the commonly accepted ultralow adsorption limit (<5 ng/cm2), demonstrating the synergistic effect of HA and BB against nonspecific protein adsorption. This was found to be independent of BSA concentration up to physiological concentrations. Furthermore, the antifouling performance of HA-BB coated surfaces was tested against milk and serum, showing almost 92% lower protein adsorption than that on bare surfaces, suggesting the potential efficacy of this antifouling coating in real life settings.

Multimodal Miniature Surface Forces Apparatus (µSFA) for Interfacial Science Measurements.

Advances in the research of intermolecular and surface interactions result from the development of new and improved measurement techniques and combinations of existing techniques. Here, we present a new miniature version of the surface forces apparatus-the µSFA-that has been designed for ease of use and multimodal capabilities with the retention of the capabilities of other SFA models including accurate measurements of the surface separation distance and physical characterization of dynamic and static physical forces (i.e., normal, shear, and friction) and interactions (e.g., van der Waals, electrostatic, hydrophobic, steric, and biospecific). The small physical size of the µSFA, compared to previous SFA models, makes it portable and suitable for integration into commercially available optical and fluorescence light microscopes, as demonstrated here. The large optical path entry and exit ports make it ideal for concurrent force measurements and spectroscopy studies. Examples of the use of the µSFA in combination with surface plasmon resonance (SPR) and Raman spectroscopy measurements are presented. Because of the short working distance constraints associated with Raman spectroscopy, an interferometric technique was developed and applied to calculate the intersurface separation distance based on Newton's rings. The introduction of the µSFA will mark a transition in SFA usage from primarily physical characterization to concurrent physical characterization with in situ chemical and biological characterization to study interfacial phenomena, including (but not limited to) molecular adsorption, fluid flow dynamics, the determination of surface species and morphology, and (bio)molecular binding kinetics.

Lubrication and Wear Protection of Micro-Structured Hydrogels Using Bioinspired Fluids.

We report the fabrication and the use of a bioinspired synovial fluid acting as a lubricant fluid and antiwear agent at soft and porous chitosan hydrogel tribopairs. This synthetic synovial fluid is composed of sodium hyaluronate (HA) and a bottle-brush polymer (BB) having a polycationic attachment group and polyzwitterionic pendant chains. The 2.5%w/w chitosan hydrogel plugs are organized in a bilayered structure exposing a thin and dense superficial zone (SZ), covering a porous deep zone (DZ), and exhibiting microchannels perpendicularly aligned to the SZ. Using a low-load tribometer, the addition of HA lubricating solution at the hydrogel-hydrogel rubbing contact drastically decreased the coefficient of friction (CoF) from µ = 0.20 ± 0.01 to 0.04 ± 0.01 on the DZ configuration and from µ = 0.31 ± 0.01 to 0.08 ± 0.01 on the SZ surface when increasing the HA concentration from 0 to 1000 µg/mL and its molecular mass from 10 to 1500 kDa, similar to what was found when using the BB polymer alone. When combining the BB polymer and the 1500 kDa HA, the CoF remained stable at µ = 0.04 ± 0.01 for both studied contact configurations, highlighting the synergistic interaction of the two macromolecules. Hydrogel wear was characterized by assessing the final gel surface roughness by the means of an interferometer. Increasing HA concentration and molecular weight plus the addition of the BB polymer led to a dramatic surface wear protection with a final gel surface roughness of the hydrogels similar to the untested gels. In brief, the BB polymer in combination with high molecular weight HA is a potential lubricating fluid as well as a wear resistant agent for soft materials lubrication and wear protection.

Coiled Coil Affinity-Based Systems for the Controlled Release of Biofunctionalized Gold Nanoparticles from Alginate Hydrogels.

Affinity-based systems represent a promising solution to control the delivery of therapeutics using hydrogels. Here, we report a hybrid system that is based on the peptidic E/K coiled coil affinity pair to mediate the release of gold nanoparticles (NPs) from alginate scaffolds. On one hand, the gold NPs were functionalized with the Ecoil-tagged epidermal growth factor (EGF). The bioactivity of the grafted EGF and the bioavailability of the Ecoil moiety were confirmed by EGF receptor phosphorylation assays and by capturing the functionalized NPs on a Kcoil-derivatized surface. On the other hand, alginate chains were modified with azido-homoalanine Kcoil (Aha-Kcoil) by azide-alkyne click chemistry. The hybrid system was formed by dispersing NPs functionalized with the Ecoil-tagged EGF in alginate hydrogels containing either 0, 10, or 20% of Kcoil-modified alginate (Alg-Kcoil). With 20% of Alg-Kcoil, the release of Ecoil-functionalized NPs was reduced by half when compared to the release of NPs without Ecoil, whereas little to no differences were noticed with either 0 or 10% of Alg-Kcoil. Differential dynamic microscopy was used to determine the diffusion coefficient of the NPs, and the results showed a decrease in the diffusion coefficient of Ecoil-functionalized NPs, when compared to bare PEGylated NPs. Altogether, our data demonstrated that the E/K coiled coil system can control the release of NPs in a high Kcoil content alginate gel, opening diverse applications in drug delivery.

Biomimetic Bottlebrush Polymer Coatings for Fabrication of Ultralow Fouling Surfaces.

Demand for long-lasting antifouling surfaces has steered the development of accessible, novel, biocompatible and environmentally friendly materials. Inspired by lubricin (LUB), a component of mammalian synovial fluid with excellent antifouling properties, three block polymers offering stability, efficacy, and ease of use were designed. The bottlebrush-structured polymers adsorbed strongly on silica surfaces in less than 10 minutes by a simple drop casting or online exposure method and were extremely stable in high-salinity solutions and across a wide pH range. Antifouling properties against proteins and bacteria were evaluated with different techniques and ultralow fouling properties demonstrated. With serum albumin and lysozyme adsorption <0.2 ng cm-2 , the polymers were 50 and 25 times more effective than LUB and known ultralow fouling coatings. The antifouling properties were also tested under MPa compression pressures by direct force measurements using surface forces apparatus. The findings suggest that these polymers are among the most robust and efficient antifouling agents currently known.

Adequate Reducing Conditions Enable Conjugation of Oxidized Peptides to Polymers by One-Pot Thiol Click Chemistry.

Thiol(-click) chemistry has been extensively investigated to conjugate (bio)molecules to polymers. Handling of cysteine-containing molecules may however be cumbersome, especially in the case of fast-oxidizing coiled-coil-forming peptides. In the present study, we investigated the practicality of a one-pot process to concomitantly reduce and conjugate an oxidized peptide to a polymer. Three thiol-based conjugation chemistries (vinyl sulfone (VS), maleimide, and pyridyldithiol) were assayed along with three reducing agents (tris(2-carboxyethyl)phosphine (TCEP), dithiothreitol, and ß-mercaptoethanol). Seven out of the nine possible combinations significantly enhanced the conjugation yield, provided that an adequate concentration of reductant was used. Among them, the coincubation of an oxidized peptide with TCEP and a VS-modified polymer displayed the highest level of conjugation. Our results also provide insights into two topics that currently lack consensus: TCEP is stable in 10 mM phosphate buffered saline and it reacts with thiol-alkylating agents at submillimolar concentrations, and thus should be carefully used in order to avoid interference with thiol-based conjugation reactions.

Bile Acid-Based Drug Delivery Systems for Enhanced Doxorubicin Encapsulation: Comparing Hydrophobic and Ionic Interactions in Drug Loading and Release.

Doxorubicin (Dox) is a drug of choice in the design of drug delivery systems directed toward breast cancers, but is often limited by loading and control over its release from polymer micelles. Bile acid-based block copolymers present certain advantages over traditional polymer-based systems for drug delivery purposes, since they can enable a higher drug loading via the formation of a reservoir through their aggregation process. In this study, hydrophobic and electrostatic interactions are compared for their influence on Dox loading inside cholic acid based block copolymers. Poly(allyl glycidyl ether) (PAGE) and poly(ethylene glycol) (PEG) were grafted from the cholic acid (CA) core yielding a star-shaped block copolymer with 4 arms (CA-(PAGE- b-PEG)4) and then loaded with Dox via a nanoprecipitation technique. A high Dox loading of 14 wt % was achieved via electrostatic as opposed to hydrophobic interactions with or without oleic acid as a cosurfactant. The electrostatic interactions confer a pH responsiveness to the system. 50% of the loaded Dox was released at pH 5 in comparison to 12% at pH 7.4. The nanoparticles with Dox loaded via hydrophobic interactions did not show such a pH responsiveness. The systems with Dox loaded via electrostatic interactions showed the lowest IC50 and highest cellular internalization, indicating the pre-eminence of this interaction in Dox loading. The blank formulations are biocompatible and did not show cytotoxicity up to 0.17 mg/mL. The new functionalized star block copolymers based on cholic acid show great potential as drug delivery carriers.

Unified Scaling of the Structure and Loading of Nanoparticles Formed by Diffusion-Limited Coalescence.

The present study establishes the scaling laws describing the structure of spherical nanoparticles formed by diffusion-limited coalescence. We produced drug-loaded nanoparticles from a poly(ethylene glycol)-poly(d,l-lactic acid) diblock polymer (PEG- b-PLA) by the nanoprecipitation method using different types of micromixing chambers to explore multiple mixing regimes and characteristic times. We first show that the drug loading of the nanoparticles is not controlled by the mixing time but solely by the drug-to-polymer ratio (D:P) in the feed and the hydrophobicity of the drug scaled via the partition coefficient P. We then procure compelling evidence that particles formed via diffusion/coalescence exhibit a relative distribution of PEG blocks between the particle core and its shell that depends only on mixing conditions (not on D:P). Scaling laws of PEG relative distribution and chain surface density were derived in different mixing regimes and showed excellent agreement with experimental data. In particular, results made evident that PEG blocks entrapment in the core of the particles occurs in the slow-mixing regime and favors the overloading (above the thermodynamic limit) of the particles with hydrophilic drugs. The present analysis compiles effective guidelines for the scale up of nanoparticles structure and properties with mixing conditions, which should facilitate their future translation to medical and industrial settings.

Bioinspired microstructures of chitosan hydrogel provide enhanced wear protection.

We describe the fabrication of physical chitosan hydrogels exhibiting a layered structure. This bilayered structure, as shown by SEM and confocal microscopy, is composed of a thin dense superficial zone (SZ), covering a deeper zone (DZ) containing microchannels orientated perpendicularly to the SZ. We show that such structure favors diffusion of macromolecules within the hydrogel matrix up to a critical pressure, σc, above which channels were constricted. Moreover, we found that the SZ provided a higher wear resistance than the DZ which was severely damaged at a pressure equal to the elastic modulus of the gel. The coefficient of friction (CoF) of the SZ remained independent of the applied load with µSZ = 0.38 ± 0.02, while CoF measured at DZ exhibited two regimes: an initial CoF close to the value found on the SZ, and a CoF that decreased to µDZ = 0.18 ± 0.01 at pressures higher than the critical pressure σc. Overall, our results show that internal structuring is a promising avenue in controlling and improving the wear resistance of soft materials such as hydrogels.

Mechanistic Insights into the Directed Assembly of Hydrogel Blocks Mediated by Polyelectrolytes or Microgels.

In this study, we report the directed assembly of hydrogel blocks mediated by electrostatic interactions. We compared two different assembly mechanisms, one mediated by microgel particles and another mediated by direct interaction between oppositely charged blocks. The system consisted of hydrogel blocks made of an interpenetrated network of (hydroxyethyl)methacrylate-poly(ethylene glycol)dimethacrylate (HEMA-PEGDMA) and either positively charged polyethylenimine (PEI) or negatively charged hyaluronic acid (HA). Positively charged hydrogel blocks were pretreated with negatively charged microgel particles (MG) made of N-isopropylacrylamide-methacrylic acid. Both systems (PEI/HA and PEI/MG) demonstrated spontaneous directed assembly, meaning that positive blocks were systematically found in contact with oppositely charged blocks. Directed assembly in water of PEI/HA blocks resulted in large and open aggregates, while PEI/MG blocks exhibited more compact aggregates. Effects of salt and pH were also assessed for both systems. Inhibition of blocks aggregation was found to appear above a critical salt concentration (CSalt*) which was significantly higher for the PEI/HA system (80 mM) compared to the PEI/MG system (5-20 mM). The observed difference was interpreted in terms of the nanostructure of the contact area between blocks. Blocks aggregation was also found to be controlled by the content of negatively charged groups in the microgels as well as the concentration of MG in the suspension (CMG) used to treat the hydrogel block surfaces. Our results shine light on the subtle differences underlying the adhesion mechanisms between hydrogel blocks and suggest new routes toward the design of innovative complex soft materials.

Unraveling the Correlations between Conformation, Lubrication, and Chemical Stability of Bottlebrush Polymers at Interfaces.

In the present study, we monitored the conformation and chemical stability of a hydrophilic bottlebrush (BB) polymer in pure water and buffered saline solutions. We correlated these parameters to lubricating and wear protecting properties. Using the surface forces apparatus (SFA), we show that the BB polymer partially adsorbs on mica surfaces and extends half its contour length toward the aqueous media. This conformation gives rise to a strong repulsive interaction force when surfaces bearing BB polymer chains are pressed against each other. Analysis of these repulsive forces demonstrated that the adsorbed polymer chains could be described as end-attached elastic rods. After 2 months of aging at temperatures ranging from 4 to 37 °C, partial scission of the BB polymer's lateral chains was observed by gel permeation chromatography with a half-life time of the polymer of at least two years. The thickness of the BB polymer layer assessed by SFA appeared to quickly decrease with aging time and temperature, which was mainly caused by the adsorption to the substrate of the released lateral chains. The gradual loss of the BB polymer lateral chains did not significantly impact the tribological properties of the BB polymer solution nor its wear protection capacity. The friction coefficient between mica surfaces immersed in the BB polymer solution was µ = 0.031 ± 0.002, was independent of the aging conditions, and remained constant up to an applied pressure P = 0.2 to 0.25 MPa. Altogether, this study demonstrates that, besides the gradual loss of lateral chains, the BB polymer is still able to perform adequately as a lubricant and wear protecting agent over a time period suitable for in vivo administration.

Lipid domains control myelin basic protein adsorption and membrane interactions between model myelin lipid bilayers.

The surface forces apparatus and atomic force microscope were used to study the effects of lipid composition and concentrations of myelin basic protein (MBP) on the structure of model lipid bilayers, as well as the interaction forces and adhesion between them. The lipid bilayers had a lipid composition characteristic of the cytoplasmic leaflets of myelin from "normal" (healthy) and "disease-like" [experimental allergic encephalomyelitis (EAE)] animals. They showed significant differences in the adsorption mechanism of MBP. MBP adsorbs on normal bilayers to form a compact film (3-4 nm) with strong intermembrane adhesion (∼0.36 mJ/m(2)), in contrast to its formation of thicker (7-8 nm) swelled films with weaker intermembrane adhesion (∼0.13 mJ/m(2)) on EAE bilayers. MBP preferentially adsorbs to liquid-disordered submicron domains within the lipid membranes, attributed to hydrophobic attractions. These results show a direct connection between the lipid composition of membranes and membrane-protein adsorption mechanisms that affects intermembrane spacing and adhesion and has direct implications for demyelinating diseases.

Interaction Forces between Supported Lipid Bilayers in the Presence of PEGylated Polymers.

Using the surface forces apparatus (SFA), interaction forces between supported lipid bilayers were measured in the presence of polyethylene glycol and two other commercially available pegylated triblock polymers, Pluronic F68 and F127. Pluronic F68 has a smaller central hydrophobic block compared to F127 and therefore is more hydrophilic. The study aimed to unravel the effects of polymer architecture and composition on the interactions between the bilayers. Our keys findings show that below the critical aggregation concentration (CAC) of the polymers, a soft, weakly anchored, polymer layer is formed on the surface of the bilayers. The anchoring strength of this physisorbed layer was found to increase significantly with the size of the hydrophobic block of the polymer, and was strongest for the more hydrophobic polymer, F127. Above the CAC, a dense polymer layer, exhibiting gel-like properties, was found to rapidly grow on the bilayers even after mechanical disruption. The cohesive interaction maintaining the gel layer structure was found to be stronger for F127, and was also found to promote the formation of highly structured aggregates on the bilayers.

Stick-slip friction and wear of articular joints.

Stick-slip friction was observed in articular cartilage under certain loading and sliding conditions and systematically studied. Using the Surface Forces Apparatus, we show that stick-slip friction can induce permanent morphological changes (a change in the roughness indicative of wear/damage) in cartilage surfaces, even under mild loading and sliding conditions. The different load and speed regimes can be represented by friction maps--separating regimes of smooth and stick-slip sliding; damage generally occurs within the stick-slip regimes. Prolonged exposure of cartilage surfaces to stick-slip sliding resulted in a significant increase of surface roughness, indicative of severe morphological changes of the cartilage superficial zone. To further investigate the factors that are conducive to stick-slip and wear, we selectively digested essential components of cartilage: type II collagen, hyaluronic acid (HA), and glycosaminoglycans (GAGs). Compared with the normal cartilage, HA and GAG digestions modified the stick-slip behavior and increased surface roughness (wear) during sliding, whereas collagen digestion decreased the surface roughness. Importantly, friction forces increased up to 2, 10, and 5 times after HA, GAGs, and collagen digestion, respectively. Also, each digestion altered the friction map in different ways. Our results show that (i) wear is not directly related to the friction coefficient but (ii) more directly related to stick-slip sliding, even when present at small amplitudes, and that (iii) the different molecular components of joints work synergistically to prevent wear. Our results also suggest potential noninvasive diagnostic tools for sensing stick-slip in joints.