Substitution Effects in Aryl Halides and Amides into the Reaction Mechanism of Ullmann-Type Coupling Reactions.

In this article, we present a comprehensive computational investigation into the reaction mechanism of N-arylation of substituted aryl halides through Ullmann-type coupling reactions. Our computational findings, obtained through DFT ωB97X-D/6-311G(d,p) and ωB97X-D/LanL2DZ calculations, reveal a direct relation between the previously reported experimental reaction yields and the activation energy of haloarene activation, which constitutes the rate-limiting step in the overall coupling process. A detailed analysis of the reaction mechanism employing the Activation Strain Model indicates that the strain in the substituted iodoanilines is the primary contributor to the energy barrier, representing an average of 80% of the total strain energy. Additional analysis based on conceptual Density Functional Theory (DFT) suggests that the nucleophilicity of the nitrogen in the lactam is directly linked to the activation energies. These results provide valuable insights into the factors influencing energetic barriers and, consequently, reaction yields. These insights enable the rational modification of reactants to optimize the N-arylation process.

Hidden intermediate activation: a concept to elucidate the reaction mechanism of the Schmittel cyclization of enyne-allenes.

The mechanistic paradigm in which the Schmittel cyclization transitions from one-step to stepwise has been investigated through the stabilization of a full hidden intermediate in the framework of the Diabatic Model of Intermediate Stabilization. Hidden intermediate activation was studied in silico employing quasi-classical trajectories and the Electron Localization Function. The stabilization of hidden intermediates achieved by substituting enyne-allenes with cyano and nitro groups generates the appearance of a partially hidden and an explicit intermediate, leading to one-step asynchronous biradical and stepwise biradical/zwitterionic mechanisms, respectively. The mechanistic feature associated with the activation level of the hidden intermediate arises from the Thornton effect and non-RRKM dynamics, where in the case of the CN-substituted system, despite having a single transition state, 54% of the effective trajectories remain in the intermediate zone after 540 fs, indicating that a mixture of mechanisms is observed.

A deeper analysis of the role of synchronicity on the Bell-Evans-Polanyi plot in multibond chemical reactions: a path-dependent reaction force constant.

The role of the degree of synchronicity in the formation of the new single-bonds in a large set of 1,3-dipolar cycloadditions and its relation in the fulfilment of the classical Bell-Evans-Polanyi principle and Hammond-Leffler postulate are deeply investigated. Our results confirm that asynchronicity is an important path-dependent factor to be taken into account: (i) the Bell-Evans-Polanyi is fulfilled as the degree of (a)synchronicity is quite the same, and a linear relationship between reorganisation energy and asynchronicity is found; (ii) the asynchronicity is the origin of deviations of this classical principle of chemical reactivity since any decrease of the energy barrier is due to an increase of asynchronicity at the same exothermicity; and (iii) the less exothermic the reaction is, the more asynchronous the mechanism is, at the same energy barrier. Thus, this implies that TS imbalance decreases the reorganisation energy, consequently affecting the reaction exothermicity as well.

Interacting Quantum Atoms Analysis of the Reaction Force: A Tool to Analyze Driving and Retarding Forces in Chemical Reactions.

The analysis of the reaction force and its topology has provided a wide range of fruitful concepts in the theory of chemical reactivity over the years, allowing to identify chemically relevant regions along a reaction profile. The reaction force (RF), a projection of the Hellmann-Feynman forces acting on the nuclei of a molecular system onto a suitable reaction coordinate, is partitioned using the interacting quantum atoms approach (IQA). The exact IQA molecular energy decomposition is now shown to open a unique window to identify and quantify the chemical entities that drive or retard a chemical reaction. The RF/IQA coupling offers an extraordinarily detailed view of the type and number of elementary processes that take reactants into products, as tested on two sets of simple reactions.

1,3-Dipolar Cycloadditions by a Unified Perspective Based on Conceptual and Thermodynamics Models of Chemical Reactivity.

The main aim in the present report is to gain a deeper understanding of typical 1,3-dipolar cycloadditions by means of three chemical reactivity models in a unified perspective: conceptual density functional theory, distortion/interaction, and reaction force analysis. The focus is to explore the information provided by each reactivity model and how they complement or reinforce each other. Our results showed that the Bell-Evans-Polanyi (BEP) relationship is fulfilled, which is consistent with the Hammond-Leffler postulate. The electronic chemical potential based analysis classifies the reactions as HOMO-, HOMO/LUMO-, and LUMO-controlled reactions as the activation energy increases. It seems likely that HOMO-controlled reaction shifts into LUMO-controlled one as the transition state (TS) position does from early into late. Therefore, the transition from HOMO- (and early TS) into LUMO-controlled (and late TS) is paid by shifting the overall energy change into an endothermic direction, thus supporting the fulfillment of the BEP principle. While thermodynamic models unveil that the distortion or structural rearrangements mainly drive the activation barriers rather than interaction or electronic rearrangements in accord with the distortion/interaction and reaction force analysis, respectively. It is also found that both models are consistent when energy associated with structural and electronic reordering from reaction force analysis is respectively confronted with destabilizing (distortion and Pauli repulsion) and stabilizing (electrostatic and orbital interactions) contributions from the distortion/interaction model, which, on the other hand, increases as low activation barrier and high exothermicity are converted into the high barrier and low exothermicity along with the BEP relation. Finally, the reaction force constant reveals that all 1,3-dipolar cycloaddition reactions proceed by a synchronous single-step mechanism, unveiling that the degree of synchronicity is quite the same in all reactions, confirming the statement that BEP is fulfilled for similar reactions proceeding by a quite alike degree of synchronicity.

Exploring the electronic and steric effects on the dimerization of intramolecular frustrated Lewis pairs: a comparison between aminoboranes and aminoalanes.

The dimerization of intramolecular aminoborane and aminoalane frustrated Lewis pairs was investigated using density functional theory. We systematically varied the substituents to gradually increase their bulkiness, including H, CH3, t-Bu, Ph, and Mes groups. Starting from the most stable conformer of the monomers, a frustrated Lewis pair or classic Lewis adduct, we studied the dimerization process for all systems, revealing significant variations in the Gibbs free energy. Dimerization was favored in four aminoboranes and six aminoalanes, depending on the specific combinations of substituents. Applying an energy decomposition analysis, we found that the preparation energy of the monomers and the non-orbital interactions between them are the primary contributors to the observed energetic differences, showing a clear linear relationship. Additionally, we analyzed the electronic effects by increasing the acidity of the Lewis acid, observing a shift toward endergonic and exergonic directions in aminoboranes and aminoalanes, respectively. This shift was attributed to the stabilization of a classic Lewis adduct. This study underscores three crucial factors influencing dimer formation: (i) substituent size, (ii) stabilization of the classic Lewis adduct conformation, and (iii) covalent radii of the Lewis centers. Understanding these factors is essential for designing FLPs and preventing unwanted dimerization that could affect their catalytic performance in H2 activation processes.

New insights into H2 activation by intramolecular frustrated Lewis pairs based on aminoboranes: the local electrophilicity index of boron as a suitable indicator to tune the reversibility of the process.

A large set of intramolecular aminoborane-based FLPs was studied employing density functional theory in the H2 activation process to analyze how the acidity and basicity of boron and nitrogen atoms, respectively, affect the reversibility of the process. Three different linkers were employed, keeping the C-C nature in the connection between both Lewis centers: -CH2-CH2-, -CH[double bond, length as m-dash]CH-, and -C6H4-. The results show that significant differences in the Gibbs free energy of the process are found by considering all the combinations of substituents. Of the 75 systems studied, only 9 showed the ability to carry out the process reversibly (ΔGH2 in the range of -3.5 to 2.0 kcal mol-1), where combinations of alkyl/aryl or aryl/alkyl in boron/nitrogen generate systems capable of reaching reversibility. If the alkyl/alkyl or aryl/aryl combination is employed, highly exergonic (non-reversible H2 activation) and endergonic (unfeasible H2 activation) reactions are found, respectively. No appreciable differences in the linker were found, allowing us to continue the analysis with the most entropically favorable linker, the -C6H4- linker. From this, 25 different FLP systems of type 2-[bis(X)boryl]-(Y)aniline (X: H, CF3, C6F5, PFtB, FMes and Y: H, CH3, t-but, Ph, Mes) can be formed. By analyzing the electronic properties of each system, we have found that the condensed-to-boron electrophilicity index ωB+ is inversely related to the ΔGH2. Interestingly, two relationships were found; the first is for alkyl groups (Y: CH3 and t-but) and the second for aryl groups (Y: H, Ph, and Mes), which is intimately related to the proton affinity of each aniline. In addition, it is quite interesting when the frustration degree, given by B⋯N distance dB-N, is brought together with ωB+, since the quotient has unit energy/length corresponding to unit force; concomitantly, a measure of the FLP strength in H-H bond activation can be defined. With this finding, a rational design of this kind of FLP can be performed by analyzing the acidity of boron through condensed-to-boron electrophilicity and knowing the nature of the substituent of nitrogen according to whether the Y is alkyl or aryl, optimizing the H2 reversible activation in a rational way, which is crucial to improve the catalytic performance.