ABSTRACT
The interpretability of gait analysis studies in people with rare diseases, such as those with primary hereditary cerebellar ataxia (pwCA), is frequently limited by the small sample sizes and unbalanced datasets. The purpose of this study was to assess the effectiveness of data balancing and generative artificial intelligence (AI) algorithms in generating synthetic data reflecting the actual gait abnormalities of pwCA. Gait data of 30 pwCA (age: 51.6 ± 12.2 years; 13 females, 17 males) and 100 healthy subjects (age: 57.1 ± 10.4; 60 females, 40 males) were collected at the lumbar level with an inertial measurement unit. Subsampling, oversampling, synthetic minority oversampling, generative adversarial networks, and conditional tabular generative adversarial networks (ctGAN) were applied to generate datasets to be input to a random forest classifier. Consistency and explainability metrics were also calculated to assess the coherence of the generated dataset with known gait abnormalities of pwCA. ctGAN significantly improved the classification performance compared with the original dataset and traditional data augmentation methods. ctGAN are effective methods for balancing tabular datasets from populations with rare diseases, owing to their ability to improve diagnostic models with consistent explainability.
Subject(s)
Algorithms , Artificial Intelligence , Cerebellar Ataxia , Gait , Rare Diseases , Humans , Female , Male , Middle Aged , Gait/physiology , Cerebellar Ataxia/genetics , Cerebellar Ataxia/physiopathology , Cerebellar Ataxia/diagnosis , Adult , Gait Analysis/methods , AgedABSTRACT
INTRODUCTION: Dizziness is a common complaint affecting up to 23% of the world population. Diagnosis is of utmost importance and routinely involves several tests to be performed in specialized centers. The advent of a new generation of technical devices would make envision their use for a valid objective vestibular assessment. Microsoft HoloLens 2 (HL2) mixed reality headset has the potential to be a valuable wearable technology that provides interactive digital stimuli and inertial measurement units (IMUs) to objectively quantify the movements of the user in response to various exercises. The aim of this study was to validate the integration of HoloLens with traditional methods used to analyze the vestibular function in order to obtain precise diagnostic values. METHODS: Twenty-six healthy adults completed the Dynamic Gait Index tests both with a traditional evaluation and while wearing HL2 headset, thus allowing to collect kinematic data of the patients' head and eyes. The subjects had to perform 8 different tasks, and the scores were independently assigned by two otolaryngology specialists. RESULTS: The maximum of the mean position of the walking axis of the subjects was found in the second task (-0.14 ± 0.23 m), while the maximum value of the standard deviation of the walking axis was found in the fifth task (-0.12 ± 0.27 m). Overall, positive results were obtained in regard to the validity of the HL2 use to analyze kinematic features. CONCLUSION: The accurate quantification of gait, movement along the walking axis, and deviation from the normality using HL2 provide an initial evidence for its useful adoption as a valuable tool in gait and mobility assessment.
Subject(s)
Augmented Reality , Virtual Reality , Adult , Humans , Gait/physiology , Walking/physiology , VertigoABSTRACT
BACKGROUND: Guidelines for degenerative cerebellar ataxia neurorehabilitation suggest intensive coordinative training based on physiotherapeutic exercises. Scientific studies demonstrate virtual exergaming therapeutic value. However, patient-based personalization, post processing analyses and specific audio-visual feedbacks are not provided. This paper presents a wearable motion tracking system with recording and playback features. This system has been specifically designed for ataxic patients, for upper limbs coordination studies with the aim to retrain movement in a neurorehabilitation setting. Suggestions from neurologists and ataxia patients were considered to overcome the shortcomings of virtual systems and implement exergaming. METHODS: The system consists of the mixed-reality headset Hololens2 and a proprietary exergaming implemented in Unity. Hololens2 can track and save upper limb parameters, head position and gaze direction in runtime. RESULTS: Data collected from a healthy subject are reported to demonstrate features and outputs of the system. CONCLUSIONS: Although further improvements and validations are needed, the system meets the needs of a dynamic patient-based exergaming for patients with cerebellar ataxia. Compared with existing solutions, the mixed-reality system is designed to provide an effective and safe therapeutic exergaming that supports both primary and secondary goals of an exergaming: what a patient should do and how patient actions should be performed.
Subject(s)
Augmented Reality , Cerebellar Ataxia , Neurological Rehabilitation , Humans , Ataxia , Upper ExtremityABSTRACT
The purpose of this work is to advance in the computational study of connectome graphs from a topological point of view. Specifically, starting from a sequence of hypergraphs associated to a brain graph (obtained using the Boundary Scale model, BS2), we analyze the resulting scale-space representation using classical topological features, such as Betti numbers and average node and edge degrees. In this way, the topological information that can be extracted from the original graph is substantially enriched, thus providing an insightful description of the graph from a clinical perspective. To assess the qualitative and quantitative topological information gain of the BS2 model, we carried out an empirical analysis of neuroimaging data using a dataset that contains the connectomes of 96 healthy subjects, 52 women and 44 men, generated from MRI scans in the Human Connectome Project. The results obtained shed light on the differences between these two classes of subjects in terms of neural connectivity.
Subject(s)
Connectome , Male , Humans , Female , Connectome/methods , Brain/diagnostic imaging , Magnetic Resonance Imaging/methods , Neuroimaging , Healthy VolunteersABSTRACT
PURPOSE: To evaluate the prognostic value of texture analysis of the primary tumour with 18 fluorine-dihydroxyphenylalanine positron emission tomography/X-ray computed tomography (18 F-DOPA PET/CT) in patients affected by high-risk neuroblastoma (HR-NBL). METHODS: We retrospectively analysed 18 patients with HR-NBL, which had been prospectively enrolled in the course of a previous trial investigating the diagnostic role of 18 F-DOPA PET/CT at the time of the first onset. Texture analysis of the primary tumour was carried out on the PET images using LifeX. Conventional indices, histogram parameters, grey level co-occurrence (GLCM), run-length (GLRLM), neighbouring difference (NGLDM) and zone-length (GLZLM) matrices parameter were extracted; their values were compared with the overall metastatic load, expressed by means of whole-body metabolic burden (WBMB) score and the progression-free/overall survival (PFS and OS). RESULTS: There was a direct correlation between WBMB and radiomics parameter describing uptake intensity (SUVmean : p = .004) and voxel heterogeneity (entropy: p = .026; GLCM_Contrast: p = .001). Conversely, texture indices of homogeneity showed an inverse correlation with WBMB (energy: p = .026; GLCM_Homogeneity: p = .006). On the multivariate model, WBMB (p < .01) and the first standardised uptake value (SUV) quartile (p < .001) predicted PFS; OS was predicted by WBMB and the N-myc proto-oncogene protein (MYCN) amplification (p < .05) for both. CONCLUSIONS: Textural parameters describing heterogeneity and metabolic intensity of the primary HR-NBL are closely associated with its overall metastatic burden. In turn, the whole-body tumour load appears to be one of the most relevant predictors of progression-free and overall survival.
Subject(s)
Neuroblastoma , Positron Emission Tomography Computed Tomography , Dihydroxyphenylalanine/analogs & derivatives , Fluorine , Fluorodeoxyglucose F18 , Humans , N-Myc Proto-Oncogene Protein , Neuroblastoma/diagnostic imaging , Positron Emission Tomography Computed Tomography/methods , Prognosis , Retrospective StudiesABSTRACT
Color Doppler (CD) imaging is widely used in diagnostics since it allows real-time detection and display of blood flow superimposed on the B-mode image. Nevertheless, to date, a shared worldwide standard on Doppler equipment testing is still lacking. In this context, the study herein proposed would give a contribution focusing on the combination of five test parameters to be included in a novel Quality Assessment (QA) protocol for CD systems testing. A first approach involving the use of the Kiviat diagram was investigated, assuming the diagram area, normalized with respect to one of the gold standards, as an index of the overall Doppler system performance. The QA parameters were obtained from the post-processing of CD data through the implementation of custom-written image analysis methods and procedures, here applied to three brand-new high-technology-level ultrasound systems. Experimental data were collected through phased and convex array probes, in two configuration settings, by means of a Doppler flow phantom set at different flow rate regimes. The outcomes confirmed that the Kiviat diagram might be a promising tool applied to quality controls of Doppler equipment, although further investigations should be performed to assess the sensitivity and specificity of the proposed approach.
Subject(s)
Hemodynamics , Ultrasonography, Doppler, Color , Ultrasonography/methods , Phantoms, Imaging , Sensitivity and SpecificityABSTRACT
This study aimed to validate a sensorized version of a perceptive surface that may be used for the early assessment of misperception of body midline representation in subjects with right stroke, even when they are not yet able to stand in an upright posture. This device, called SuPerSense, allows testing of the load distribution of the body weight on the back in a supine position. The device was tested in 15 patients with stroke, 15 age-matched healthy subjects, and 15 young healthy adults, assessing three parameters analogous to those conventionally extracted by a baropodometric platform in a standing posture. Subjects were hence tested on SuPerSense in a supine position and on a baropodometric platform in an upright posture in two different conditions: with open eyes and with closed eyes. Significant correlations were found between the lengths of the center of pressure path with the two devices in the open-eyes condition (R = 0.44, p = 0.002). The parameters extracted by SuPerSense were significantly different among groups only when patients were divided into those with right versus left brain damage. This last result is conceivably related to the role of the right hemisphere of the brain in the analysis of spatial information.
Subject(s)
Posture , Standing Position , Adult , Humans , Supine Position , Body Weight , PerceptionABSTRACT
PURPOSE: Male sex, high BMI, narrow pelvis, and bulky mesorectum were acknowledged as clinical variables correlated with a difficult pelvic dissection in colorectal surgery. This paper aimed at comparing pelvic biometric measurements in female and male patients and at providing a perspective on how pelvimetry segmentation may help in visualizing mesorectal distribution. METHODS: A 3D software was used for segmentation of DICOM data of consecutive patients aged 60 years, who underwent elective abdominal CT scan. The following measurements were estimated: pelvic inlet, outlet, and depth; pubic tubercle height; distances from the promontory to the coccyx and to S3/S4; distance from S3/S4 to coccyx's tip; ischial spines distance; pelvic tilt; offset angle; pelvic inlet angle; angle between the inlet/sacral promontory/coccyx; angle between the promontory/coccyx/pelvic outlet; S3 angle; and pelvic inlet to pelvic depth ratio. The measurements were compared in males and females using statistical analyses. RESULTS: Two-hundred patients (M/F 1:1) were analyzed. Out of 21 pelvimetry measurements, 19 of them documented a significant mean difference between groups. Specifically, female patients had a significantly wider pelvic inlet and outlet but a shorter pelvic depth, and promontory/sacral/coccyx distances, resulting in an augmented inlet/depth ratio when comparing with males (p < 0.0001). The sole exceptions were the straight conjugate (p = 0.06) and S3 angle (p = 0.17). 3D segmentation provided a perspective of the mesorectum distribution according to the pelvic shape. CONCLUSION: Significant differences in the structure of pelvis exist in males and females. Surgeons must be aware of the pelvic shape when approaching the rectum.
Subject(s)
Colorectal Neoplasms , Digestive System Surgical Procedures , Female , Humans , Male , Pelvimetry , Pelvis/diagnostic imaging , RectumABSTRACT
Fatigue is a hidden symptom of Multiple Sclerosis (MS) disease that nevertheless impacts severely on patients' everyday life. Evidence indicates the involvement of the sensorimotor network and its inter-nodes communication at the basis of this symptom. Two randomized controlled trials (RCTs) showed that the personalized neuromodulation called Fatigue Relief in Multiple Sclerosis (FaReMuS) efficaciously fights multiple sclerosis (MS) fatigue. By this Proof of Concept study, we tested whether FaReMuS reverts the alteration of the brain-muscular synchronization previously observed occurring with fatigue. The cortico muscular coherence (CMC) was studied in 11 patients before and after FaReMuS, a 5-day tDCS (1.5 mA, 15 min per day) anodal over the whole body's somatosensory representation (S1) via a personalized MRI-based electrode (35 cm2) against the occipital cathode (70 cm2). Before FaReMuS, the CMC was observed at a mean frequency of 31.5 ± 1.6 Hz (gamma-band) and positively correlated with the level of fatigue (p = .027). After FaReMuS, fatigue reduced in average of 28% ± 33% the baseline level, and the CMC frequency reduced to 26.6 ± 1.5 Hz (p = .022), thus forthcoming the physiological beta-band as observed in healthy people. The personalized S1 neuromodulation treatment, ameliorating the central-peripheral communication that subtends simple everyday movements, supports the appropriateness of neuromodulations aiming at increasing the parietal excitability in fighting MS fatigue. The relationship between central-peripheral features and fatigue profile strengthens a central more than peripheral origin of the symptom.
Subject(s)
Multiple Sclerosis , Transcranial Direct Current Stimulation , Brain , Fatigue/etiology , Fatigue/therapy , Humans , Magnetic Resonance Imaging , Multiple Sclerosis/complications , Multiple Sclerosis/therapyABSTRACT
Dynamic motor imagery (dMI) is a motor imagery task associated with movements partially mimicking those mentally represented. As well as conventional motor imagery, dMI has been typically assessed by mental chronometry tasks. In this paper, an instrumented approach was proposed for quantifying the correspondence between upper and lower limb oscillatory movements performed on the spot during the dMI of walking vs. during actual walking. Magneto-inertial measurement units were used to measure limb swinging in three different groups: young adults, older adults and stroke patients. Participants were tested in four experimental conditions: (i) simple limb swinging; (ii) limb swinging while imagining to walk (dMI-task); (iii) mental chronometry task, without any movement (pure MI); (iv) actual level walking at comfortable speed. Limb swinging was characterized in terms of the angular velocity, frequency of oscillations and sinusoidal waveform. The dMI was effective at reproducing upper limb oscillations more similar to those occurring during walking for all the three groups, but some exceptions occurred for lower limbs. This finding could be related to the sensory feedback, stretch reflexes and ground reaction forces occurring for lower limbs and not for upper limbs during walking. In conclusion, the instrumented approach through wearable motion devices adds significant information to the current dMI approach, further supporting their applications in neurorehabilitation for monitoring imagery training protocols in patients with stroke.
Subject(s)
Monitoring, Physiologic , Stroke , Walking , Aged , Healthy Volunteers , Humans , Lower Extremity , Male , Movement , Young AdultABSTRACT
BACKGROUND: The present study was undertaken to systematically review the literature on the reliability of using contrast-enhanced ultrasound (CEUS) to assess thyroid nodules. To avoid the potential bias in studies using a cytological standard of reference, here we aimed to meta-analyze data from studies adopting histological diagnosis as the gold standard. METHODS: A comprehensive literature exploration of PubMed and Scopus was conducted. The search was updated until June 2018 and references of the retrieved articles screened. Only original articles reporting the histological follow-up of nodules previously undergone CEUS evaluation were eligible for inclusion. Pooled sensitivity, specificity, PPV, and NPV of CEUS were calculated by DerSimonian and Laird method (random-effects model). RESULTS: The literature search retrieved 1885 articles, and 14 were included for the study. There were Chinese, Italian, German, and Austrian authors. All studies used SonoVue. The overall number of reported nodules was 1515, of which 775 were classified as positive at CEUS and 740 as negative. Pooled sensitivity, specificity, PPV, and NPV of CEUS were 85% (95% CI 83-88), 82% (95% CI 77-87), 83% (95% CI 77-88), and 85% (95% CI 81-88), respectively. Moderate inconsistency was present for specificity and PPV. There was publication bias for sensitivity and NPV. CONCLUSIONS: CEUS reaches good performance in discriminating between malignant and benign thyroid lesions.
Subject(s)
Thyroid Nodule/diagnostic imaging , Ultrasonography/methods , Contrast Media , HumansABSTRACT
PURPOSE: We compared the effectiveness of high intensity focused ultrasound (HIFU) and radioiodine (RAI) to treat patients carrying toxic thyroid nodule (TTN). Normalization of serum thyrotropin (TSH) 1 year after treatment was the primary end-point; concurrent changes in nodules' volume and scintigraphic pattern were also evaluated as secondary end-points. MATERIALS AND METHODS: Among patients ≥18 years old with TTN observed at our centre between January 1st, 2016 and December 31th, 2016 we prospectively enrolled 17 and 15 age and sex-matched patients treated with RAI and HIFU, respectively. Biochemical thyroid tests and nodules' volume were assessed before and 3, 6 and 12 months after treatments. A thyroid scintigraphy was performed before and 1 year after treatment, respectively. RESULTS: The final series included 17 patients treated with RAI and 15 patients treated with HIFU, respectively. Neither demographic nor clinical differences were found at baseline. One year after treatment 14 of 17 RAI-treated and 4 of 15 HIFU-treated patients fulfilled criteria for response to treatment (P = .0008). Indeed, the median TSH value was 1.5 IU/mL and 0.2 IU/mL in HIFU and RAI groups, respectively (P < .0001). Finally, despite a similar decrease in nodules' volume in both groups, a scintigraphic response was achieved in 16 of 17 (94%) RAI-treated compared to 8 of 15 (53%) HIFU-treated patients (P = .024), respectively. CONCLUSIONS: In our series, RAI clearly outperforms HIFU in treating patients carrying TTN and remains the first-line noninvasive treatment in such cases.
ABSTRACT
INTRODUCTION: The pathogenic mechanism underlying capsular contracture is still unknown. It is certainly a multifactorial process, resulting from human body reaction, biofilm activation, bacteremic seeding, or silicone exposure. The scope of the present article is to investigate the effect of hypofractionated radiotherapy protocol (2.66 Gy × 16 sessions) both on silicone and polyurethane breast implants. METHODS: Silicone implants and polyurethane underwent irradiation according to a hypofractionated radiotherapy protocol for the treatment of breast cancer. After irradiation implant shells underwent mechanical, chemical, and microstructural evaluation by means of tensile testing, infrared spectra in attenuated total reflectance mode, nuclear magnetic resonance, and field emission scanning electron microscopy. RESULTS: At superficial analysis, irradiated silicone samples show several visible secondary and tertiary blebs. Polyurethane implants showed an open cell structure, which closely resembles a sponge. Morphological observation of struts from treated polyurethane sample shows a more compact structure, with significantly shorter and thicker struts compared with untreated sample. The infrared spectra in attenuated total reflectance mode spectra of irradiated and control samples were compared either for silicon and polyurethane samples. In the case of silicone-based membranes, treated and control specimens showed similar bands, with little differences in the treated one. Nuclear magnetic resonance spectra on the fraction soluble in CDCl3 support these observations. Tensile tests on silicone samples showed a softer behavior of the treated ones. Tensile tests on Polyurethane samples showed no significant differences. CONCLUSIONS: Polyurethane implants seem to be more resistant to radiotherapy damage, whereas silicone prosthesis showed more structural, mechanical, and chemical modifications.
Subject(s)
Breast Implants , Polyurethanes/radiation effects , Radiation Dose Hypofractionation , Silicone Gels/radiation effects , Materials Testing , Mechanical PhenomenaABSTRACT
In the present study, the progression of gait impairment in a group of patients with primary degenerative cerebellar ataxias was observed over a period of 4 years. A total of 30 patients underwent an initial gait analysis study, and thereafter only 12 were evaluated because they completed the 2- and 4-year follow-up evaluations. Time-distance parameters, trunk and joint range of motion (RoM), and variability parameters (e.g., coefficients of variation) were measured at the baseline and at each follow-up evaluation. The scale for the assessment and rating of ataxia (SARA) was used to evaluate disease severity. We found a significant increase in the SARA score at both the 2- and 4-year follow-up evaluations. Almost all the gait variables changed significantly only at the 4-year follow-up. Particularly, we found a significant decrease in the step length and in the hip, knee, and ankle joint RoM values and noted a significant increase in the trunk rotation RoM and stride-to-stride and step length variability. Furthermore, a significant difference in ankle joint RoM was found between spinocerebellar ataxia and sporadic adult-onset ataxia patients, with the value being lower in the former group of patients. Our findings suggest that patients with degenerative cerebellar ataxias exhibit gait decline after 4 years from the baseline. Moreover, patients try to maintain an effective gait by adopting different compensatory mechanisms during the course of the disease in spite of disease progression.
Subject(s)
Cerebellar Ataxia/physiopathology , Cerebellar Diseases/physiopathology , Gait Ataxia/physiopathology , Gait/physiology , Adult , Aged , Disease Progression , Female , Follow-Up Studies , Humans , Male , Middle Aged , Severity of Illness IndexABSTRACT
This work presents the experimental investigation of vibration maps of a linear array transducer with 192 piezoelements by means of a laser Doppler vibrometer at various manufacturing finishing steps in air and in water. Over the years, many researchers have investigated cross-coupling in fabricated prototypes but not in arrays at various manufacturing stages. Only the central element of the array was driven at its working frequency of 5 MHz. The experimental results showed that the contributions of cross-coupling depend on the elements of the acoustic stack: Lead Zirconate Titanate (PZT), kerf, filler, matching layer, and lens. The oscillation amplitudes spanned from (6 ± 38%) nm to (110 ± 40%) nm when the energized element was tested in air and from (6 ± 57%) nm to (80 ± 67%) nm when measurements were obtained under water. The best inter-element isolation of -22 dB was measured in air after cutting the kerfs, whereas the poorest isolation was -2 dB under water with an acoustic lens (complete acoustic stack). The vibration pattern in water showed a higher standard deviation on the displacement measurements than the one obtained in air, due to the influence of acousto-optic interactions. The amount increased to 30% in water, as estimated by a comparison with the measurements in air. This work describes a valuable method for manufacturers to investigate the correspondence between the manufacturing process and the quantitative evaluations of the resulting effects.
ABSTRACT
PURPOSE: Lately, the main technical innovations in the field of colorectal surgery have been the introduction of laparoscopic and robotic techniques; the aim of this study is to investigate the results and the advantages of these two surgical approaches. METHODS: Twenty-two studies including 1652 laparoscopic and 1120 robotic-assisted resections were analyzed and categorized into right, left, and pelvic resections of the middle/low rectum, aiming to the following outcomes: operating time, blood loss, bowel function recovery, return to oral intake, morbidity, hospital stay, and costs. RESULTS: The vast majority of the studies were non-randomized investigations (19/22 studies) enrolling small cohorts of patients (median 55.0 laparoscopic and 34.5 robotic-assisted group) with a mean age of 62.2-61.0 years. Funnel plot analysis documented heterogeneity in studies which combined cancers and benign diseases. Our meta-analysis demonstrated a significant difference in favor of laparoscopic procedures regarding costs and operating time (standardized mean difference (SMD) 0.686 and 0.493) and in favor of robotic surgery concerning morbidity rate (odds ratio (OR) 0.763), although no benefits were documented when analyzing exclusively randomized trials. When we differentiated approaches by side of resections, a significant difference was found in favor of the laparoscopic group when analyzing operating time in left-sided and pelvic procedures (SMD 0.609 and 0.529) and blood loss in pelvic resections (SMD 0.339). CONCLUSION: Laparoscopic techniques were documented as the shorter procedures, which provided lower blood loss in pelvic resections, while morbidity rate was more favorable in robotic surgery. However, these results could not be confirmed when we focused the analysis on randomized trials only.
Subject(s)
Colectomy/methods , Laparoscopy/methods , Rectum/surgery , Robotic Surgical Procedures , Blood Loss, Surgical , Colectomy/adverse effects , Colectomy/economics , Colonic Diseases/surgery , Colorectal Neoplasms/surgery , Hospital Costs , Humans , Laparoscopy/adverse effects , Laparoscopy/economics , Length of Stay , Lymph Node Excision , Operative Time , Recovery of Function , Rectal Diseases/surgery , Robotic Surgical Procedures/adverse effects , Robotic Surgical Procedures/economicsABSTRACT
Stroke affects many gait features, such as gait stability, symmetry, and harmony. However, it is still unclear which of these features are directly altered by primary damage, and which are affected by the reduced walking speed. The aim of this study was to analyze the above gait features in patients with subacute stroke with respect to the values observed in age- and speed-matched healthy subjects. A wearable triaxial accelerometer and an optoelectronic device were used for assessing the upright gait stability, symmetry of trunk movements, and harmonic structure of gait phases by means of the root-mean-square (RMS) acceleration of the trunk, harmonic ratio (HR), and gait ratios (GRs), respectively. For healthy subjects, results showed that RMS acceleration increased with speed, HR peaked at a comfortable speed, and GRs tended towards the theoretical value of the golden ratio for speeds >1 m/s. At matched speed conditions, patients showed higher instabilities in the latero-lateral axis (p = 0.001) and reduced symmetry of trunk movements (p = 0.002). Different from healthy subjects, antero-posterior and latero-lateral acceleration harmonics were coupled in patients (R = 0.507, p = 0.023). Conversely, GRs were not more altered in patients than in slow-walking healthy subjects. In conclusion, patients with stroke showed some characteristics similar to those of the elderly when the latter subjects walk slowly, and some altered characteristics, such as increased latero-lateral instabilities coupled with movements performed along the antero-posterior axis.
ABSTRACT
The behavior of ZnO nanowires under uniaxial loading is characterized by means of a numerical model that accounts for all coupled mechanical, electrical, and thermal effects. The paper shows that thermal effects in the nanowires may greatly impact the predicted performance of piezoelectric and piezotronic nanodevices. The pyroelectric effect introduces new equivalent volumic charge in the body of the nanowire and surface charges at the boundaries, where Kapitza resistances are located, that act together with the piezoelectric charges to improve the predicted performance. It is shown that the proposed model is able to reproduce several effects experimentally observed by other research groups, and is a promising tool for the design of ultra-high efficient nanodevices.
ABSTRACT
Micro- and nano-scale materials and systems based on zinc oxide are expected to explode in their applications in the electronics and photonics, including nano-arrays of addressable optoelectronic devices and sensors, due to their outstanding properties, including semiconductivity and the presence of a direct bandgap, piezoelectricity, pyroelectricity and biocompatibility. Most applications are based on the cooperative and average response of a large number of ZnO micro/nanostructures. However, in order to assess the quality of the materials and their performance, it is fundamental to characterize and then accurately model the specific electrical and piezoelectric properties of single ZnO structures. In this paper, we report on focused ion beam machined high aspect ratio nanowires and their mechanical and electrical (by means of conductive atomic force microscopy) characterization. Then, we investigate the suitability of new power-law design concepts to accurately model the relevant electrical and mechanical size-effects, whose existence has been emphasized in recent reviews.
ABSTRACT
The engineering of new 3D bioprinting approaches has shown great promise in the field of tissue engineering and disease modelling. However, the high cost of commercial 3D bioprinters has limited their accessibility, especially to those laboratories in resource-limited settings. Moreover, the need for a 3D bioprinting system capable of dispensing multiple materials is growing apace. Therefore, the development of a Microfluidic-assisted Open Source 3D bioprinting System (MOS3S) for the engineering of hierarchical tissues is needed to progress in fabricating functional tissues, but with a technology accessible to a wider range of researchers. The MOS3S platform is designed to allow the deposition of biomaterial inks using microfluidic printheads or coaxial nozzles for the in-situ crosslinking and scaffolds fabrication. The coupling of 3D printed syringe pumps with the motion control system is used for driving the tunable extrusion of inks for the fabrication of centimeter scale hierarchical lattice constructs for tissue engineering purposes. MOS3S performance have been validated to fabricate high-resolution structures with coaxial microfluidic technology, opening to new frontiers for seminal studies in pre-clinical disease modelling and tissue regeneration.