ABSTRACT
Aspiration pneumonia has the highest attributable mortality of all medical complications post-stroke, or in individuals with progressive neurological diseases. For optimum health outcomes for individuals with dysphagia, a non-invasive and convenient method for objectively detecting aspiration is needed. This study introduces a potential new aspiration screening method based on photoacoustic imaging (PAI), a medical imaging technology that measures the optical contrast of tissue rather than mechanical or elastic properties. In this preliminary study, a tissue-mimicking neck phantom was designed to test the performance of PAI for aspiration screening with a charcoal solution as a contrast agent. A 1064 nm wavelength light source was illuminated on the anterior of the neck phantom to induce the photoacoustic effect. The resulting photoacoustic signal of the charcoal contrast in the mock trachea was detected by a linear transducer array with a 2.25 MHz central ultrasound frequency. The phantom results showed that charcoal solution at 10 mg/ml exhibited strong photoacoustic signals when flowing into the phantom trachea. By overlaying the photoacoustic signals of the charcoal contrast on top of the ultrasound image, we were able to simultaneously visualize the movement of food contrast and a cross-section of tissue structures during mock swallowing. Moreover, we confirmed the ability to detect the flow of charcoal contrast at a small bolus volume of ~ 7 µl through the phantom, suggesting high sensitivity to detect small aspiration events. The study suggests that PAI holds promise to be developed as an aspiration detection tool with charcoal powder as a contrast agent.
Subject(s)
Photoacoustic Techniques , Humans , Photoacoustic Techniques/methods , Charcoal , Contrast Media , Phantoms, Imaging , Diagnostic ImagingABSTRACT
Microfluidic cell sorting has shown promising advantages over traditional bulky cell sorting equipment and has demonstrated wide-reaching applications in biological research and medical diagnostics. The most important characteristics of a microfluidic cell sorter are its throughput, ease of use, and integration of peripheral equipment onto the chip itself. In this review, we discuss the six most common methods for pumping fluid samples in microfluidic cell sorting devices, present their advantages and drawbacks, and discuss notable examples of their use. Syringe pumps are the most commonly used method for fluid actuation in microfluidic devices because they are easily accessible but they are typically too bulky for portable applications, and they may produce unfavorable flow characteristics. Peristaltic pumps, both on- and off-chip, can produce reversible flow but they suffer from pulsatile flow characteristics, which may not be preferable in many scenarios. Gravity-driven pumping, and similarly hydrostatic pumping, require no energy input but generally produce low throughputs. Centrifugal flow is used to sort cells on the basis of size or density but requires a large external rotor to produce centrifugal force. Electroosmotic pumping is appealing because of its compact size but the high voltages required for fluid flow may be incompatible with live cells. Emerging methods with potential for applications in cell sorting are also discussed. In the future, microfluidic cell sorting methods will trend toward highly integrated systems with high throughputs and low sample volume requirements.