ABSTRACT
The thermal conductivity κ of cyclopentane clathrate hydrate (CP CH) of type II was measured at temperatures down to 100 K and at pressures up to 1.3 GPa. The results show that CP CH displays amorphous-like κ characteristic of many crystalline clathrate hydrates, e.g., tetrahydrofuran (THF) CH. The magnitude of κ is 0.47 W m-1 K-1 near the melting point of 280 K at atmospheric pressure, and it is almost independent of pressure and temperature T: ln κ = -0.621-40.1/T at atmospheric pressure (in SI-units). This is slightly less than κ of type II CHs of water-miscible solvents such as THF. Intriguingly, unlike other water-rich type II clathrate hydrates of water-miscible molecules M (M·17 H2O), CP CH does not amorphize at pressures up to 1.3 GPa at 130 K and also remains stable up to 0.5 GPa at 240 K. This shows that CP CH is mechanically more stable than the previously studied water-rich type II CHs, and suggests that repulsive forces between CP and the H2O cages increase the mechanical stability of crystalline CP CH. Moreover, we show that κ of an ice-CH mixture, which often arises for CHs that form naturally, is described by the average of the parallel and series heat conduction models to within 5% for ice contents up to 22 wt%. The findings provide a better understanding of the thermal and stability properties of clathrate hydrates for their applications such as gas storage compounds.
ABSTRACT
From crystalline tetrahydrofuran clathrate hydrate, THF-CH (THF·17H2O, cubic structure II), three distinct polyamorphs can be derived. First, THF-CH undergoes pressure-induced amorphization when pressurized to 1.3 GPa in the temperature range 77-140 K to a form which, in analogy to pure ice, may be called high-density amorphous (HDA). Second, HDA can be converted to a densified form, VHDA, upon heat-cycling at 1.8 GPa to 180 K. Decompression of VHDA to atmospheric pressure below 130 K produces the third form, recovered amorphous (RA). Results from neutron scattering experiments and molecular dynamics simulations provide a generalized picture of the structure of amorphous THF hydrates with respect to crystalline THF-CH and liquid THF·17H2O solution (â¼2.5 M). Although fully amorphous, HDA is heterogeneous with two length scales for water-water correlations (less dense local water structure) and guest-water correlations (denser THF hydration structure). The hydration structure of THF is influenced by guest-host hydrogen bonding. THF molecules maintain a quasiregular array, reminiscent of the crystalline state, and their hydration structure (out to 5 Å) constitutes â¼23H2O. The local water structure in HDA is reminiscent of pure HDA-ice featuring 5-coordinated H2O. In VHDA, the hydration structure of HDA is maintained but the local water structure is densified and resembles pure VHDA-ice with 6-coordinated H2O. The hydration structure of THF in RA constitutes â¼18 H2O molecules and the water structure corresponds to a strictly 4-coordinated network, as in the liquid. Both VHDA and RA can be considered as homogeneous.
ABSTRACT
Type II clathrate hydrates (CHs) were studied by thermal and dielectric measurements. All CHs amorphize, or collapse, on pressurization to 1.3 GPa below 135 K. After heating to 160 K at 1 GPa, the stability of the amorphous states increases in a process similar to the gradual high density to very high density amorphous ice (HDA to VHDA) transition. On a subsequent pressure decrease, the amorphized CHs expand partly irreversibly similar to the gradual VHDA to expanded HDA ice transformation. After further heating at 1 GPa, weak transition features appear near the HDA to low density amorphous ice transition. The results suggest that CH nucleation sites vanish on heating to 160 K at 1 GPa and that a sluggish partial phase-separation process commences on further heating. The collapsed CHs show two glass transitions (GTs), GT1 and GT2. GT1 is weakly pressure-dependent, 12 K GPa-1, with a relaxation time of 0.3 s at 140 K and 1 GPa; it is associated with a weak heat capacity increase of 3.7 J H2O-mol-1 K-1 in a 18 K range and an activation energy of only 38 kJ mol-1 at 1 GPa. The corresponding temperature of GT2 is 159 K at 0.4 GPa with a pressure dependence of 36 K GPa-1; it shows 5.5 times larger heat capacity increase and 4 times higher activation energy than GT1. GT1 is observed also in HDA and VHDA, whereas GT2 occurs just above the crystallization temperature of expanded HDA and only within its â¼0.2-0.7 GPa stable pressure range.
ABSTRACT
The type II clathrate hydrate (CH) THF·17 H2O (THF = tetrahydrofuran) is known to amorphize on pressurization to â¼1.3 GPa in the temperature range 77-140 K. This seems to be related to the pressure induced amorphization (PIA) of hexagonal ice to high density amorphous (HDA) ice. Here, we probe the PIA of THF-d8 · 17 D2O (TDF-CD) at 130 K by in situ thermal conductivity and neutron diffraction experiments. Both methods reveal amorphization of TDF-CD between 1.1 and 1.2 GPa and densification of the amorphous state on subsequent heating from 130 to 170 K. The densification is similar to the transition of HDA to very-high-density-amorphous ice. The first diffraction peak (FDP) of the neutron structure factor function, S(Q), of amorphous TDF-CD at 130 K appeared split. This feature is considered a general phenomenon of the crystalline to amorphous transition of CHs and reflects different length scales for D-D and D-O correlations in the water network and the cavity structure around the guest. The maximum corresponding to water-water correlations relates to the position of the FDP of HDA ice at â¼1 GPa. Upon annealing, the different length scales for water-water and water-guest correlations equalize and the FDP in the S(Q) of the annealed amorph represents a single peak. The similarity of local water structures in amorphous CHs and amorphous ices at in situ conditions is confirmed from molecular dynamics simulations. In addition, these simulations show that THF guest molecules are immobilized and retain long-range correlations as in the crystal.
ABSTRACT
Three amorphous forms of Ar hydrate were produced using the crystalline clathrate hydrate Ar·6.5H2O (structure II, Fd3Ìm, a ≈ 17.1 Å) as a precursor and structurally characterized by a combination of isotope substitution (36Ar) neutron diffraction and molecular dynamics (MD) simulations. The first form followed from the pressure-induced amorphization of the precursor at 1.5 GPa at 95 K and the second from isobaric annealing at 2 GPa and subsequent cooling back to 95 K. In analogy to amorphous ice, these amorphs are termed high-density amorphous (HDA) and very-high-density amorphous (VHDA), respectively. The third amorph (recovered amorphous, RA) was obtained when recovering VHDA to ambient pressure (at 95 K). The three amorphs have distinctly different structures. In HDA the distinction of the original two crystallographically different Ar guests is maintained as differently dense Ar-water hydration structures, which expresses itself in a split first diffraction peak in the neutron structure factor function. Relaxation of the local water structure during annealing produces a homogeneous hydration environment around Ar, which is accompanied with a densification by about 3%. Upon pressure release the homogeneous amorphous structure undergoes expansion by about 21%. Both VHDA and RA can be considered frozen solutions of immiscible Ar and water in which in average 15 and 11 water molecules, respectively, coordinate Ar out to 4 Å. The local water structures of HDA and VHDA Ar hydrates show some analogy to those of the corresponding amorphous ices, featuring H2O molecules in 5- and 6-fold coordination with neighboring molecules. However, they are considerably less dense. Most similarity is seen between RA and low density amorphous ice (LDA), which both feature strictly 4-coordinated H2O networks. It is inferred that, depending on the kind of clathrate structure and occupancy of cages, amorphous states produced from clathrate hydrates display variable local water structures.
ABSTRACT
Layered zinc hydroxides (LZHs) with the general formula (Zn2+) x (OH-)2x-my (A m-) y ·nH2O (A m- = Cl-, NO3 -, ac-, SO4 2-, etc) are considered as useful precursors for the fabrication of functional ZnO nanostructures. Here, we report the synthesis and structure characterization of the hitherto unknown "binary" representative of the LZH compound family, Zn5(OH)10·2H2O, with A m- = OH-, x = 5, y = 2, and n = 2. Zn5(OH)10·2H2O was afforded quantitatively by pressurizing mixtures of ε-Zn(OH)2 (wulfingite) and water to 1-2 GPa and applying slightly elevated temperatures, 100-200 °C. The monoclinic crystal structure was characterized from powder X-ray diffraction data (space group C2/c, a = 15.342(7) Å, b = 6.244(6) Å, c = 10.989(7) Å, ß = 100.86(1)°). It features neutral zinc hydroxide layers, composed of octahedrally and tetrahedrally coordinated Zn ions with a 3:2 ratio, in which H2O is intercalated. The interlayer d(200) distance is 7.53 Å. The H-bond structure of Zn5(OH)10·2H2O was analyzed by a combination of infrared/Raman spectroscopy, computational modeling, and neutron powder diffraction. Interlayer H2O molecules are strongly H-bonded to five surrounding OH groups and appear orientationally disordered. The decomposition of Zn5(OH)10·2H2O, which occurs thermally between 70 and 100 °C, was followed in an in situ transmission electron microscopy study and ex situ annealing experiments. It yields initially 5-15 nm sized hexagonal w-ZnO crystals, which, depending on the conditions, may intergrow to several hundred nm-large two-dimensional, flakelike crystals within the boundary of original Zn5(OH)10·2H2O particles.