Reaction Pathways for the Enzymatic Degradation of Poly(Ethylene Terephthalate): What Characterizes an Efficient PET-Hydrolase?

Bioprocessing of polyester waste has emerged as a promising tool in the quest for a cyclic plastic economy. One key step is the enzymatic breakdown of the polymer, and this entails a complicated pathway with substrates, intermediates, and products of variable size and solubility. We have elucidated this pathway for poly(ethylene terephthalate) (PET) and four enzymes. Specifically, we combined different kinetic measurements and a novel stochastic model and found that the ability to hydrolyze internal bonds in the polymer (endo-lytic activity) was a key parameter for overall enzyme performance. Endo-lytic activity promoted the release of soluble PET fragments with two or three aromatic rings, which, in turn, were broken down with remarkable efficiency (kcat /KM values of about 105  M-1 s-1 ) in the aqueous bulk. This meant that approximatly 70 % of the final, monoaromatic products were formed via soluble di- or tri-aromatic intermediates.

Biocatalytic stereoselective synthesis of pyrrolidine-2,3-diones containing all-carbon quaternary stereocenters.

Highly functionalized pyrrolidine-2,3-diones can be synthesized efficiently and stereoselectively under mild conditions using a biocatalytic approach. The reaction led to the formation of new all-carbon quaternary stereocenters from Myceliophthora thermophila laccase (Novozym 51003) catalyzed oxidation of catechols to ortho-quinones and subsequent 1,4-addition with 3-hydroxy-1,5-dihydro-2H-pyrrol-2-ones. The reaction was conducted with various substituents on both reactants, resulting in 13 products in moderate to good yields (42-91%). The same 15 reactions were also tested with K3Fe(CN)6 as a catalyst, but here only one reaction resulted in a product (60% yield).

Biocatalytic synthesis of oxadiazole thioethers and evaluation of their antitumor activity.

A multicomponent enzyme-catalyzed process is suggested for the synthesis of a novel series of 1,3,4-oxadiazole thioether derivatives with yields ranging from 65 to 94%. Novozym 435, the immobilized form of Candida antarctica lipase B (CALB), was found to efficiently catalyze the reaction. The products were evaluated for antitumor activities against two cancer cell lines, HT-29 (human colorectal cancer cell) and HepG2 (human liver cancer cell), by MTT assays. Among them, two compounds exhibited higher antitumor activities, for both cell lines, compared to doxorubicin. In silico molecular docking and computational ADME analysis were performed to propose a mode of action for the anti-cancer activities and to predict drug-likeness, respectively.

Comparative Biochemistry of Four Polyester (PET) Hydrolases*.

The potential of bioprocessing in a circular plastic economy has strongly stimulated research into the enzymatic degradation of different synthetic polymers. Particular interest has been devoted to the commonly used polyester, poly(ethylene terephthalate) (PET), and a number of PET hydrolases have been described. However, a kinetic framework for comparisons of PET hydrolases (or other plastic-degrading enzymes) acting on the insoluble substrate has not been established. Herein, we propose such a framework, which we have tested against kinetic measurements for four PET hydrolases. The analysis provided values of kcat and KM , as well as an apparent specificity constant in the conventional units of M-1 s-1 . These parameters, together with experimental values for the number of enzyme attack sites on the PET surface, enabled comparative analyses. A variant of the PET hydrolase from Ideonella sakaiensis was the most efficient enzyme at ambient conditions; it relied on a high kcat rather than a low KM . Moreover, both soluble and insoluble PET fragments were consistently hydrolyzed much faster than intact PET. This suggests that interactions between polymer strands slow down PET degradation, whereas the chemical steps of catalysis and the low accessibility associated with solid substrate were less important for the overall rate. Finally, the investigated enzymes showed a remarkable substrate affinity, and reached half the saturation rate on PET when the concentration of attack sites in the suspension was only about 50 nM. We propose that this is linked to nonspecific adsorption, which promotes the nearness of enzyme and attack sites.

A carbohydrate-binding family 48 module enables feruloyl esterase action on polymeric arabinoxylan.

Feruloyl esterases (EC 3.1.1.73), belonging to carbohydrate esterase family 1 (CE1), hydrolyze ester bonds between ferulic acid (FA) and arabinose moieties in arabinoxylans. Recently, some CE1 enzymes identified in metagenomics studies have been predicted to contain a family 48 carbohydrate-binding module (CBM48), a CBM family associated with starch binding. Two of these CE1s, wastewater treatment sludge (wts) Fae1A and wtsFae1B isolated from wastewater treatment surplus sludge, have a cognate CBM48 domain and are feruloyl esterases, and wtsFae1A binds arabinoxylan. Here, we show that wtsFae1B also binds to arabinoxylan and that neither binds starch. Surface plasmon resonance analysis revealed that wtsFae1B's Kd for xylohexaose is 14.8 µm and that it does not bind to starch mimics, ß-cyclodextrin, or maltohexaose. Interestingly, in the absence of CBM48 domains, the CE1 regions from wtsFae1A and wtsFae1B did not bind arabinoxylan and were also unable to catalyze FA release from arabinoxylan. Pretreatment with a ß-d-1,4-xylanase did enable CE1 domain-mediated FA release from arabinoxylan in the absence of CBM48, indicating that CBM48 is essential for the CE1 activity on the polysaccharide. Crystal structures of wtsFae1A (at 1.63 Å resolution) and wtsFae1B (1.98 Å) revealed that both are folded proteins comprising structurally-conserved hydrogen bonds that lock the CBM48 position relative to that of the CE1 domain. wtsFae1A docking indicated that both enzymes accommodate the arabinoxylan backbone in a cleft at the CE1-CBM48 domain interface. Binding at this cleft appears to enable CE1 activities on polymeric arabinoxylan, illustrating an unexpected and crucial role of CBM48 domains for accommodating arabinoxylan.

Relationships of crystallinity and reaction rates for enzymatic degradation of poly (ethylene terephthalate), PET.

Biocatalytic degradation of plastic waste is anticipated to play an important role in future recycling systems. However, enzymatic degradation of crystalline poly (ethylene terephthalate) (PET) remains consistently poor. Herein, we employed functional assays to elucidate the molecular underpinnings of this limitation. This included utilizing complementary activity assays to monitor the degradation of PET disks with varying crystallinity (XC), as well as determining enzymatic kinetic parameters for soluble PET fragments. The results indicate that an efficient PET-hydrolase, LCCICCG, operates through an endolytic mode of action, and that its activity is limited by conformational constraints in the PET polymer. Such constraints become more pronounced at high XC values, and this limits the density of productive sites on the PET surface. Endolytic chain-scissions are the dominant reaction type in the initial stage, and this means that little or no soluble organic product are released. However, endolytic cuts gradually and locally promote chain mobility and hence the density of attack sites on the surface. This leads to an upward concave progress curve; a behavior sometimes termed lag-phase kinetics.

Immobilization of Bacillus amyloliquefaciens protease "Neutrase" as hybrid enzyme inorganic nanoflower particles: A new biocatalyst for aldol-type and multicomponent reactions.

Organic-inorganic hybrid nanoflowers (hNFs) with commercial protease "Neutrase" is proposed and characterized as efficient and green biocatalysts for promiscuous catalysis in aldol-type and multicomponent reactions. Neutrase hNFs [Neutrase-(Cu/Ca/Co/Mn)3(PO4)2] are straightforwardly prepared through mixing metal ion (Cu2+, Ca2+, Co2+ or Mn2+) aqueous solutions with Neutrase in phosphate buffer (pH 7.4, 10 mM) resulting in precipitation (3 days). The hNFs were characterized by various techniques including scanning electron microscopy (SEM), energy dispersive X-ray (EDX), element mapping, X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). In SEM images, the metal-Neutrase complexes revealed flower-like or granular structures after hybridization. The effect of metal ions and enzyme concentrations on the morphology and enzyme activity of the Neutrase-hNFs was examined. The synthesized Neutrase-Mn hNFs showed superior activity and stability compared to free Neutrase. Traditional organic CC coupling reactions such as aldol condensation, decarboxylative aldol, Knoevenagel, Hantzsch-type reactions and synthesis of 4H-pyran derivatives were used to test the generality and scope of Neutrase promiscuity, while optimizing conditions for the Neutrase-Mn hNF biocatalyst. Briefly, Neutrase-Mn3(PO4)2 hNFs showed excellent enzyme activity, stability and reusability, qualifying as effective reusable catalysts for coupling reactions under mild conditions.

Candida antarctica lipase B performance in organic solvent at varying water activities studied by molecular dynamics simulations.

Applications of lipases in low-water environments are found across a broad range of industries, including the pharmaceutical and oleochemical sectors. This includes condensation reactions in organic solvents where the enzyme activity has been found to depend strongly on both the solvent and the water activity (aw). Despite several experimental and computational studies, knowledge is largely empirical, and a general predictive approach is much needed. To close this gap, we chose native Candida antarctica lipase B (CALB) and two mutants thereof and used molecular dynamics (MD) simulations to gain a molecular understanding of the effect of aw on the specific activity of CALB in hexane. Based on the simulations, we propose four criteria to understand the performance of CALB in organic media, which is supported by enzyme kinetics experiments. First, the lipase must be stable in the organic solvent, which was the case for native CALB and the two mutants studied here. Secondly, water clusters that form and grow close to the active site must not block the path of substrate molecules into the active site. Thirdly, the lipase's lid must not cover the active site. Finally, mutations and changes in aw must not disrupt the geometry of the active site. We show that mutating specific residues close to the active site can hinder water cluster formation and growth, making the lipase resistant to changes in aw. Our computational screening criteria could potentially be used to screen in-silico designed variants, so only promising candidates could be pushed forward to characterisation.

Fungal feruloyl esterases can catalyze release of diferulic acids from complex arabinoxylan.

Feruloyl esterases (FAEs, EC 3.1.1.73) catalyze the hydrolytic cleavage of ester bonds between feruloyl and arabinosyl moieties in arabinoxylans. Recently, we discovered that two bacterial FAEs could catalyze release of diferulic acids (diFAs) from highly substituted, cross-linked corn bran arabinoxylan. Here, we show that several fungal FAEs, notably AnFae1 (Aspergillus niger), AoFae1 (A. oryzae), and MgFae1 (Magnaporthe oryzae (also known as M. grisae)) also catalyze liberation of diFAs from complex arabinoxylan. By comparing the enzyme kinetics of diFA release to feruloyl esterase activity of the enzymes on methyl- and arabinosyl-ferulate substrates we demonstrate that the diFA release activity cannot be predicted from the activity of the enzymes on these synthetic substrates. A detailed structure-function analysis, based on AlphaFold2 modeled enzyme structures and docking with the relevant di-feruloyl ligands, reveal how distinct differences in the active site topology and surroundings may explain the diFA releasing action of the enzymes. Interestingly, the analysis also unveils that the carbohydrate binding module of the MgFae1 may play a key role in the diFA releasing ability of this enzyme. The findings contribute further understanding of the function of FAEs in the deconstruction of complex arabinoxylans and provide new opportunities for enzyme assisted upgrading of complex bran arabinoxylans.

Rate Response of Poly(Ethylene Terephthalate)-Hydrolases to Substrate Crystallinity: Basis for Understanding the Lag Phase.

The rate response of poly(ethylene terephthalate) (PET)-hydrolases to increased substrate crystallinity (XC ) of PET manifests as a rate-lowering effect that varies significantly for different enzymes. Herein, we report the influence of XC on the product release rate of six thermostable PET-hydrolases. All enzyme reactions displayed a distinctive lag phase until measurable product formation occurred. The duration of the lag phase increased with XC . The recently discovered PET-hydrolase PHL7 worked efficiently on "amorphous" PET disks (XC ≈10 %), but this enzyme was extremely sensitive to increased XC , whereas the enzymes LCCICCG , LCC, and DuraPETase had higher tolerance to increases in XC and had activity on PET disks having XC of 24.4 %. Microscopy revealed that the XC -tolerant hydrolases generated smooth and more uniform substrate surface erosion than PHL7 during reaction. Structural and molecular dynamics analysis of the PET-hydrolyzing enzymes disclosed that surface electrostatics and enzyme flexibility may account for the observed differences.

Biocatalytic decarboxylative Michael addition for synthesis of 1,4-benzoxazinone derivatives.

The Candida antarctica lipase B (Novozym 435) is found to catalyze a novel decarboxylative Michael addition in vinylogous carbamate systems for the synthesis of 1,4-benzoxazinone derivatives. The reaction goes through Michael addition, ester hydrolysis and decarboxylation. A possible mechanism is suggested, with simultaneous lipase-catalyzed Michael addition and ester hydrolysis. The present methodology offers formation of complex products through multi-step reactions in a one pot process under mild and facile reaction conditions with moderate to high yields (51-90%) and no side product formation. The reaction seems to be is a great example of enzymatic promiscuity.

Diarylation of thiazolopyrimidines by laccase and their in vitro evaluation as antitumor agents.

A mild and efficient method was developed for the synthesis of new derivatives of thiazolo[3,2-a] pyrimidin-3(2H)-ones from available starting materials based on the oxidation of catechols to ortho-quinone by Myceliophthora thermophila laccase (Novozym 51,003) and 1,4-addition of active methylene carbon to these in situ generated intermediates in moderate to good yields (35-93%). The structure of the products was confirmed through 1H NMR, 13C NMR, HMBC, HSQC, DEPT-135, and mass spectroscopy techniques. These novel compounds were evaluated as active antitumor agents against human colorectal adenocarcinoma and liver adenocarcinoma cell lines. All compounds displayed potent inhibition activities against the HT-29 cell line with IC50 values of 9.8-35.9 µM, superior to the positive control doxorubicin, and most showed potent anticancer activities against the HepG2 cell line.

Enzymatic Cleavage of Diferuloyl Cross-Links in Corn Bran Arabinoxylan by Two Bacterial Feruloyl Esterases.

Corn bran is an abundant coprocessing stream of corn-starch processing, rich in highly substituted, diferuloyl-cross-linked glucurono-arabinoxylan. The diferuloyl cross-links make the glucurono-arabinoxylan recalcitrant to enzymatic conversion and constitute a hindrance for designing selective enzymatic upgrading of corn glucurono-arabinoxylan. Here, we show that two bacterial feruloyl esterases, wtsFae1A and wtsFae1B, each having a carbohydrate-binding module of family 48, are capable of cleaving the ester bonds of the cross-linkages and releasing 5-5', 8-5', 8-5' benzofuran, and 8-O-4' diferulate from soluble and insoluble corn bran glucurono-arabinoxylan. All four diferulic acids were released at similar efficiency, indicating nondiscriminatory enzymatic selectivity for the esterified dimer linkages, the only exception being that wtsFae1B had a surprisingly high propensity for releasing the dimers, especially 8-5' benzofuran diferulate, indicating a potential, unique catalytic selectivity. The data provide evidence of direct enzymatic release of diferulic acids from corn bran by newly discovered feruloyl esterases, i.e., a new enzyme activity. The findings yield new insight and create new opportunities for enzymatic opening of diferuloyl cross-linkages to pave the way for upgrading of recalcitrant arabinoxylans.

Improvement of biodiesel production from palm oil by co-immobilization of Thermomyces lanuginosa lipase and Candida antarctica lipase B: Optimization using response surface methodology.

Candida antarctica lipase B (CALB) and Thermomyces lanuginose lipase (TLL) were co-immobilized on epoxy functionalized silica gel via an isocyanide-based multicomponent reaction. The immobilization process was carried out in water (pH 7) at 25 °C, rapidly (3 h) resulting in high immobilization yields (100%) with a loading of 10 mg enzyme/g support. The immobilized preparations were used to produce biodiesel by transesterification of palm oil. In an optimization study, response surface methodology (RSM) and central composite rotatable design (CCRD) methods were used to study the effect of five independent factors including temperature, methanol to oil ratio, t-butanol concentration and CALB:TLL ratio on the yield of biodiesel production. The optimum combinations for the reaction were CALB:TLL ratio (2.1:1), t-butanol (45 wt%), temperature (47 °C), methanol: oil ratio (2.3). This resulted in a FAME yield of 94%, very close to the predicted value of 98%.

Development of an active site titration reagent for α-amylases.

α-Amylases are among the most widely used classes of enzymes in industry and considerable effort has gone into optimising their activities. Efforts to find better amylase mutants, such as through high-throughput screening, would be greatly aided by access to precise and robust active site titrating agents for quantitation of active mutants in crude cell lysates. While active site titration reagents designed for retaining ß-glycosidases quantify these enzymes down to nanomolar levels, convenient titrants for α-glycosidases are not available. We designed such a reagent by incorporating a highly reactive fluorogenic leaving group onto unsaturated cyclitol ethers, which have been recently shown to act as slow substrates for retaining glycosidases that operate via a covalent 'glycosyl'-enzyme intermediate. By appending this warhead onto the appropriate oligosaccharide, we developed efficient active site titration reagents for α-amylases that effect quantitation down to low nanomolar levels.

Quantum Dot Lipase Biosensor Utilizing a Custom-Synthesized Peptidyl-Ester Substrate.

Lipases are an important class of lipid hydrolyzing enzymes that play significant roles in many aspects of cell biology and digestion; they also have large roles in commercial food and biofuel preparation and are being targeted for pharmaceutical development. Given these, and many other biotechnological roles, sensitive and specific biosensors capable of monitoring lipase activity in a quantitative manner are critical. Here, we describe a Förster resonance energy transfer (FRET)-based biosensor that originates from a custom-synthesized ester substrate displaying a peptide at one end and a dye acceptor at the other. These substrates were ratiometrically self-assembled to luminescent semiconductor quantum dot (QD) donors by metal affinity coordination using the appended peptide's terminal hexahistidine motif to give rise to the full biosensing construct. This resulted in a high rate of FRET between the QD donor and the proximal substrate's dye acceptor. The lipase hydrolyzed the intervening target ester bond in the peptide substrate which, in turn, displaced the dye acceptor containing component and altered the rate of FRET in a concentration-dependent manner. Specifics of the substrate's stepwise synthesis are described along with the sensors assembly, characterization, and application in a quantitative proof-of-concept demonstration assay that is based on an integrated Michaelis-Menten kinetic approach. The utility of this unique nanoparticle-based architecture within a sensor configuration is then discussed.

Understanding the plasticity of the alpha/beta hydrolase fold: lid swapping on the Candida antarctica lipase B results in chimeras with interesting biocatalytic properties.

The best of both worlds. Long molecular dynamics (MD) simulations of Candida antarctica lipase B (CALB) confirmed the function of helix alpha5 as a lid structure. Replacement of the helix with corresponding lid regions from CALB homologues from Neurospora crassa and Gibberella zeae resulted in new CALB chimeras with novel biocatalytic properties. The figure shows a snapshot from the MD simulation. The Candida antarctica lipase B (CALB) has found very extensive use in biocatalysis reactions. Long molecular dynamics simulations of CALB in explicit aqueous solvent confirmed the high mobility of the regions lining the channel that leads into the active site, in particular, of helices alpha5 and alpha10. The simulation also confirmed the function of helix alpha5 as a lid of the lipase. Replacing it with corresponding lid regions from the CALB homologues from Neurospora crassa and Gibberella zeae resulted in two new CALB mutants. Characterization of these revealed several interesting properties, including increased hydrolytic activity on simple esters, specifically substrates with C(alpha) branching on the carboxylic side, and much increased enantioselectivity in hydrolysis of racemic ethyl 2-phenylpropanoate (E>50), which is a common structure of the profen drug family.

The structure of the AliC GH13 α-amylase from Alicyclobacillus sp. reveals the accommodation of starch branching points in the α-amylase family.

α-Amylases are glycoside hydrolases that break the α-1,4 bonds in starch and related glycans. The degradation of starch is rendered difficult by the presence of varying degrees of α-1,6 branch points and their possible accommodation within the active centre of α-amylase enzymes. Given the myriad industrial uses for starch and thus also for α-amylase-catalysed starch degradation and modification, there is considerable interest in how different α-amylases might accommodate these branches, thus impacting on the potential processing of highly branched post-hydrolysis remnants (known as limit dextrins) and societal applications. Here, it was sought to probe the branch-point accommodation of the Alicyclobacillus sp. CAZy family GH13 α-amylase AliC, prompted by the observation of a molecule of glucose in a position that may represent a branch point in an acarbose complex solved at 2.1 Šresolution. Limit digest analysis by two-dimensional NMR using both pullulan (a regular linear polysaccharide of α-1,4, α-1,4, α-1,6 repeating trisaccharides) and amylopectin starch showed how the Alicyclobacillus sp. enzyme could accept α-1,6 branches in at least the -2, +1 and +2 subsites, consistent with the three-dimensional structures with glucosyl moieties in the +1 and +2 subsites and the solvent-exposure of the -2 subsite 6-hydroxyl group. Together, the work provides a rare insight into branch-point acceptance in these industrial catalysts.

Novel xylanolytic triple domain enzyme targeted at feruloylated arabinoxylan degradation.

A three catalytic domain multi-enzyme; a CE1 ferulic acid esterase, a GH62 α-l-arabinofuranosidase and a GH10 ß-d-1,4-xylanase was identified in a metagenome obtained from wastewater treatment sludge. The capability of the CE1-GH62-GH10 multi-enzyme to degrade arabinoxylan was investigated to examine the hypothesis that CE1-GH62-GH10 would degrade arabinoxylan more efficiently than the corresponding equimolar mix of the individual enzymes. CE1-GH62-GH10 efficiently catalyzed the production of xylopyranose, xylobiose, xylotriose, arabinofuranose and ferulic acid (FA) when incubated with insoluble wheat arabinoxylan (WAX-I) (kcat = 20.8 ± 2.6 s-1). Surprisingly, in an equimolar mix of the individual enzymes a similar kcat towards WAX-I was observed (kcat = 17.3 ± 3.8 s-1). Similarly, when assayed on complex plant biomass the activity was comparable between CE1-GH62-GH10 and an equimolar mix of the individual enzymes. This suggests that from a hydrolytic point of view a CE1-GH62-GH10 multi-enzyme is not an advantage. Determination of the melting temperatures for CE1-GH62-GH10 (71.0 ± 0.05 °C) and CE1 (69.9 ± 0.02), GH62 (65.7 ± 0.06) and GH10 (71 ± 0.05 °C) indicates that CE1 and GH62 are less stable as single domain enzymes. This conclusion was corroborated by the findings that CE1 lost ˜50% activity within 2 h, while GH62 retained ˜50% activity after 24 h, whereas CE1-GH62-GH10 and GH10 retained ˜50% activity for 72 h. GH62-GH10, when appended to each other, displayed a higher specificity constant (kcat/Km = 0.3 s-1 mg-1 ml) than the individual GH10 (kcat/Km = 0.12 s-1 ± 0.02 mg-1 ml) indicating a synergistic action between the two. Surprisingly, CE1-GH62, displayed a 2-fold lower kcat towards WAX-I than GH62, which might be due to the presence of a putative carbohydrate binding module appended to CE1 at the N-terminal. Both CE1 and CE1-GH62 released insignificant amounts of FA from WAX-I, but FA was released from WAX-I when both CE1 and GH10 were present, which might be due to GH10 releasing soluble oligosaccharides that CE1 can utilize as substrate. CE1 also displayed activity towards solubilized 5-O-trans-feruloyl-α-l-Araf (kcat = 36.35 s-1). This suggests that CE1 preferably acts on soluble oligosaccharides.

Softening of POPC membranes by magainin.

Magainin 2 belongs to the family of peptides, which interacts with the lipid membranes. The present work deals with the effect of this peptide on the mechanical properties of 1-palmitoyl-2-oleoyl-sn-glycerol-3-phosphocholine Giant Unilamellar Vesicle, characterized by the bending stiffness modulus. The bending elastic modulus is measured by Vesicle Fluctuation Analysis at biologically relevant pH and physiological buffer conditions and shows a dramatic decrease with increasing peptide concentration. The observed bilayer softening is interpreted in terms of a continuum model describing perturbations on the membrane organization. Our analysis suggests that the adsorbed peptides give rise to considerable local curvature disruptions of the membrane.