ABSTRACT
In MLCT chromophores, internal conversion (IC) in the form of hole reconfiguration pathways (HR) is a major source of dissipation of the absorbed photon energy. Therefore, it is desirable to minimize their impact in energy conversion schemes by slowing them down. According to previous findings on {Ru(bpy)} chromophores, donor-acceptor interactions between the Ru ion and the ligand scaffold might allow to control HR/IC rates. Here, a series of [Ru(tpm)(bpy)(R-py)]2+ chromophores, where tpm is tris(1-pyrazolyl)methane, bpy is 2,2'-bipyridine and R-py is a 4-substituted pyridine, were prepared and fully characterized employing electrochemistry, spectroelectrochemistry, steady-state absorption/emission spectroscopy and electronic structure computations based on DFT/TD-DFT. Their excited-state decay was monitored using nanosecond and femtosecond transient absorption spectroscopy. HR/IC lifetimes as slow as 568â ps were obtained in DMSO at room temperature, twice as slow as in the reference species [Ru(tpm)(bpy)(NCS)]+.
ABSTRACT
This work explores the concept that differential wave function overlap between excited states can be engineered within a molecular chromophore. The aim is to control excited state wave function symmetries, so that symmetry matches or mismatches result in differential orbital overlap and define low-energy trajectories or kinetic barriers within the excited state surface, that drive excited state population toward different reaction pathways. Two donor-acceptor assemblies were explored, where visible light absorption prepares excited states of different wave function symmetry. These states could be resolved using transient absorption spectroscopy, thanks to wave function symmetry-specific photoinduced optical transitions. One of these excited states undergoes energy transfer to the acceptor, while another undertakes a back-electron transfer to restate the ground state. This differential behavior is possible thanks to the presence of kinetic barriers that prevent excited state equilibration. This strategy can be exploited to avoid energy dissipation in energy conversion or photoredox catalytic schemes.
ABSTRACT
The surface of Carbon Nanodots (CNDs) stands as a rich chemical platform, able to regulate the interactions between particles and external species. Performing selective functionalization of these nanoscale entities is of practical importance, however, it still represents a considerable challenge. In this work, we exploited the organic chemistry toolbox to install target functionalities on the CND surface, while monitoring the chemical changes on the material's outer shell through nuclear magnetic resonance spectroscopy. Following this, we investigated the use of click chemistry to covalently connect CNDs of different nature en-route towards covalent suprastructures with unprecedent molecular control. The different photophysical properties of the connected particles allowed their optical communication in the excited state. This work paves the way for the development of selective and addressable CND building blocks which can act as modular nanoscale synthons that mirror the long-established reactivity of molecular organic synthesis.
ABSTRACT
In natural and artificial photosynthesis, light absorption and catalysis are separate processes linked together by exergonic electron transfer. This leads to free energy losses between the initial excited state, formed after light absorption, and the active catalyst formed after the electron transfer cascade. Additional deleterious processes, such as internal conversion (IC) and vibrational relaxation (VR), also dissipate as much as 20-30% of the absorbed photon energy. Minimization of these energy losses, a holy grail in solar energy conversion and solar fuel production, is a challenging task because excited states are usually strongly coupled which results in negligible kinetic barriers and very fast dissipation. Here, we show that topological control of oligomeric {Ru(bpy)3} chromophores resulted in small excited-state electronic couplings, leading to activation barriers for IC by means of inter-ligand electron transfer of around 2000 cm-1 and effectively slowing down dissipation. Two types of excited states are populated upon visible light excitation, that is, a bridging-ligand centered metal-to-ligand charge transfer [MLCT(Lm)], and a 2,2'-bipyridine-centered MLCT [MLCT(bpy)], which lies 800-1400 cm-1 higher in energy. As a proof-of-concept, bimolecular electron transfer with tri-tolylamine (TTA) as electron donor was performed, which mimics catalyst activation by sacrificial electron donors in typical photocatalytic schemes. Both excited states were efficiently quenched by TTA. Hence, this novel strategy allows to trap higher energy excited states before IC and VR set in, saving between 100 and 170 meV. Furthermore, transient absorption spectroscopy suggests that electron transfer reactions with TTA produced the corresponding Lmâ¢--centered and bpyâ¢--centered reduced photosensitizers, which involve different reducing abilities, that is, -0.79 and -0.93 V versus NHE for Lmâ¢- and bpyâ¢-, respectively. Thus, this approach probably leads in fine to a 140 meV more potent reductant for energy conversion schemes and solar fuel production. These results lay the first stone for anti-dissipative energy conversion schemes which, in bimolecular electron transfer reactions, harness the excess energy saved by controlling dissipative conversion pathways.
ABSTRACT
Carbon nanodots (CNDs) synthesized from citric acid and formyl derivatives, that is, formamide, urea, or N-methylformamide, stand out through their broad-range visible-light absorbance and extraordinary photostability. Despite their potential, their use has thus far been limited to imaging research. This work has now investigated the link between CNDs' photochemical properties and their chemical structure. Electron-rich, yellow carbon nanodots (yCNDs) are obtained with in situ addition of NaOH during the synthesis, whereas otherwise electron-poor, red carbon nanodots (rCNDs) are obtained. These properties originate from the reduced and oxidized dimer of citrazinic acid within the matrix of yCNDs and rCNDs, respectively. Remarkably, yCNDs deposited on TiO2 give a 30% higher photocurrent density of 0.7 mA cm-2 at +0.3 V versus Ag/AgCl under Xe-lamp irradiation (450 nm long-pass filter, 100 mW cm-2 ) than rCNDs. The difference in overall photoelectric performance is due to fundamentally different charge-transfer mechanisms. These depend on either the electron-accepting or the electron-donating nature of the CNDs, as is evident from photoelectrochemical tests with TiO2 and NiO and time-resolved spectroscopic measurements.
ABSTRACT
Covalent functionalization of graphene oxide (GO) with boron dipyrromethenes (BODIPYs) was achieved through a facile synthesis, affording two different GO-BODIPY conjugates where the main difference lies in the nature of the spacer and the type of bonds between the two components. The use of a long but flexible spacer afforded strong electronic GO-BODIPY interactions in the ground state. This drastically altered the light absorption of the BODIPY structure and impeded its selective excitation. In contrast, the utilisation of a short, but rigid spacer based on boronic esters resulted in a perpendicular geometry of the phenyl boronic acid BODIPY (PBA-BODIPY) with respect to the GO plane, which enables only minor electronic GO-BODIPY interactions in the ground state. In this case, selective excitation of PBA-BODIPY was easily achieved, allowing to investigate the excited state interactions. A quantitative ultrafast energy transfer from PBA-BODIPY to GO was observed. Furthermore, due to the reversible dynamic nature of the covalent GO-PBA-BODIPY linkage, some PBA-BODIPY is free in solution and, hence, not quenched from GO. This resulted in a weak, but detectable fluorescence from the PBA-BODIPY that will allow to exploit GO-PBA-BODIPY for slow release and imaging purposes.
ABSTRACT
The photophysical properties of monodentate-imine ruthenium complexes do not usually fulfil the requirements for supramolecular solar energy conversion schemes. Their short excited-state lifetimes, like the 5.2 ps metal-to-ligand charge transfer (MLCT) lifetime of [Ru(py)4Cl(L)]+ with L = pz (pyrazine), preclude bimolecular or long-range photoinduced energy or electron transfer reactions. Here, we explore two strategies to extend the excited-state lifetime, based on the chemical modification of the distal N atom of pyrazine. On one hand, we used L = pzH+, where protonation stabilized MLCT states, rendering thermal population of MC states less favorable. On the other hand, we prepared a symmetric bimetallic arrangement in which L = {(µ-pz)Ru(py)4Cl} to enable hole delocalization via photoinduced mixed-valence interactions. A lifetime extension of 2 orders of magnitude is accomplished, with charge transfer excited states living 580 ps and 1.6 ns, respectively, reaching compatibility with bimolecular or long-range photoinduced reactivity. These results are similar to those obtained with Ru pentaammine analogues, suggesting that the strategy employed is of general applicability. In this context, the photoinduced mixed-valence properties of the charge transfer excited states are analyzed and compared with those of different analogues of the Creutz-Taube ion, demonstrating a geometrical modulation of the photoinduced mixed-valence properties.
ABSTRACT
Transition metal dichalcogenides are attractive 2D materials in the context of solar energy conversion. Previous investigations have focused predominantly on the properties of these systems. The realization of noncovalent hybrids with, for example, complementary electroactive materials remains underexplored to this date for exfoliated WS2. In this contribution, we explore WS2 by means of exfoliation and integration together with visible light-absorbing and electron-accepting perylene diimides into versatile electron-donor acceptor hybrids. Important is the distinct electron-donating feature of WS2. Detailed spectroscopic investigations of WS2-PDI confirm the electron donor/acceptor nature of the hybrid and indicate that green light photoexcitation leads to the formation of long-lived WS2â¢+-PDIâ¢- charge-separated states.
ABSTRACT
We report high-valent iron complexes supported by N-heterocyclic carbene (NHC)-anchored, bis-phenolate pincer ligands that undergo ligand-to-metal charge transfer (LMCT) upon photoexcitation. The resulting excited states - with a lifetime in the picosecond range - feature a ligand-based, mixed-valence system and intense intervalence charge transfer bands in the near-infrared region. Upon oxidation of the complex, corresponding intervalence charge transfer absorptions are also observed in the ground state. We suggest that the spectroscopic hallmarks of such LMCT states provide useful tools to decipher excited-state decay mechanisms in high-valent NHC complexes. Our observations further indicate that NHC-anchored, bis-phenolate pincer ligands are not sufficiently strong donors to prevent the population of excited metal-centered states in high-valent iron complexes.
Subject(s)
Methane , Phenols , Crystallography, X-Ray , Iron , Ligands , Methane/analogs & derivativesABSTRACT
The exploitation of excited state chemistry for solar energy conversion or photocatalysis has been continuously increasing, and the needs of a transition to a sustainable human development indicate this trend will continue. In this scenario, the study of mixed valence systems in the excited state offers a unique opportunity to explore excited state electron transfer reactivity, and, in a broader sense, excited state chemistry. This Concept article analyzes recent contributions in the field of photoinduced mixed valence systems, i. e. those where the mixed valence core is absent in the ground state but created upon light absorption. The focus is on the utilization of photoinduced intervalence charge transfer bands, detected via transient absorption spectroscopy, as key tools to study fundamental phenomena like donor/acceptor inversion, hole delocalization, coexistence of excited states and excited state nature, together with applications in molecular electronics.
Subject(s)
Electron Transport , Humans , Spectrum AnalysisABSTRACT
Internal conversion (IC) coupled to vibrational relaxation (VR) in molecular chromophores is a source of major energy losses in natural and artificial solar-to-chemical energy conversion schemes. The development of anti-Kasha chromophores, where dissipative IC channels are blocked, is a promising strategy to boost energy conversion efficiencies. In this contribution, we demonstrate the presence of an unusually high kinetic barrier for IC in [Ru(tpm)(bpy)(NCS)]+ (RuNCS), where tpm is tris(1-pyrazolyl)methane and bpy is 2,2'-bipyridine, by means of an arsenal of temperature-dependent spectroscopic methods including nanosecond and femtosecond transient absorption spectroscopies. These studies are complemented with theoretical investigations, that provide a detailed atomistic description of the dissipation process, including the electronic structures of the excited states involved. The observed IC is mainly a hole reconfiguration within the octahedral t2g set of the Ru ion, with contributions from a Ru to NCS charge transfer. Thus, in a Marcus picture, inner and outer reorganizations contribute to the observed barrier. The results presented here show that wavefunction symmetry within a molecular chromophore can be exploited to inhibit dissipative IC. Finally, guidelines for the design of anti-Kasha chromophores that prevent dissipation in energy conversion schemes, based on minimum energy conical intersection calculations, are provided.
ABSTRACT
The ground state and photoinduced mixed valence states (GSMV and PIMV, respectively) of a dinuclear (Dp4+) ruthenium(II) complex bearing 2,2'-bipyridine ancillary ligands and a 2,2':4',4'':2'',2'''-quaterpyridine (Lp) bridging ligand were investigated using femtosecond and nanosecond transient absorption spectroscopy, electrochemistry and density functional theory. It was shown that the electronic coupling between the transiently light-generated Ru(II) and Ru(III) centers is HDA â¼ 450 cm-1 in the PIMV state, whereas the electrochemically generated GSMV state showed HDA â¼ 0 cm-1, despite virtually identical Ru-Ru distances. This stemmed from the changes in dihedral angles between the two bpy moieties of Lp, estimated at 30° and 4° for the GSMV and PIMV states, respectively, consistent with a through-bond rather than a through-space mechanism. Electronic coupling can be turned on by using visible light excitation, making Dp4+ a competitive candidate for photoswitching applications. A novel strategy to design photoinduced charge transfer molecular switches is proposed.
ABSTRACT
The excited-state version of the Creutz-Taube ion was prepared via visible light excitation of [(NH3 )5 RuII (µ-pz)RuII (NH3 )5 ]4+ . The resulting excited state is a mixed valence {RuIII-δ (µ-pzâ - )RuII+δ } transient species, which was characterized using femtosecond transient absorption spectroscopy with vis-NIR detection. Very intense photoinduced intervalence charge transfers were observed at 7500â cm-1 , revealing an excited-state electronic coupling element HDA =3750â cm-1 . DFT calculations confirm a strongly delocalized excited state. A notable consequence of strong electron delocalization is the nanosecond excited state lifetime, which was exploited in a proof-of-concept intermolecular electron transfer. The excited-state Creutz-Taube ion is established as a reference, and demonstrates that electron delocalization in the excited state can be leveraged for artificial photosynthesis or other photocatalytic schemes based on electron transfer chemistry.
ABSTRACT
Carbon nanodots (CNDs) were photochemically altered to produce dihydrogen under light irradiation. Within the complex structure of CNDs, photo-oxidation takes place at citrazinic acid molecular fluorophore sites. Important is the fact that the resulting CND materials have a dual function. On one hand, they absorb light, and on the other hand, they photo- and electrocatalytically produce dihydrogen from water and seawater, without any external photosensitizer or cocatalyst. Record HER activities of 15.15 and 19.70 mmol(H2) g(catalyst)-1 h-1 were obtained after 1 h of 75 mW/cm2 Xe lamp illumination, from water and seawater, respectively. This impressive performance outweighs the remaining structural uncertainties. A full-fledged physicochemical investigation based on an arsenal of steady-state and time-resolved spectroscopic characterizations together with microscopy enabled a comprehensive look into the reaction mechanism. For an efficient dihydrogen formation, a precatalytic activation by means of reduction with a sacrificial electron donor is imperative.
ABSTRACT
Efficient excited-state electron transfer between an iron(III) photosensitizer and organic electron donors was realized with green light irradiation. This advance was enabled by the use of the previously reported iron photosensitizer, [Fe(phtmeimb)2]+ (phtmeimb = {phenyl[tris(3-methyl-imidazolin-2-ylidene)]borate}, that exhibited long-lived and luminescent ligand-to-metal charge-transfer (LMCT) excited states. A benchmark dehalogenation reaction was investigated with yields that exceed 90% and an enhanced stability relative to the prototypical photosensitizer [Ru(bpy)3]2+. The initial catalytic step is electron transfer from an amine to the photoexcited iron sensitizer, which is shown to occur with a large cage-escape yield. For LMCT excited states, this reductive electron transfer is vectorial and may be a general advantage of Fe(III) photosensitizers. In-depth time-resolved spectroscopic methods, including transient absorption characterization from the ultraviolet to the infrared regions, provided a quantitative description of the catalytic mechanism with associated rate constants and yields.
ABSTRACT
Carbon nanodots (CNDs) undergo electron transfer in different scenarios. Previous studies have mainly focused on the electron-accepting features of CNDs in covalently linked donor-acceptor nanoconjugates. In view of this, we decided to carry out in this study the formation of covalently linked nanoconjugates that feature electron-donating pressure synthesized carbon nanodots (pCNDs) and electron-accepting 11,11,12,12-tetracyano-9,10-anthra-p-quinodimethane (TCAQ): pCND-TCAQ. The stability of the one-electron reduced form of TCAQ renders it the acceptor of choice. Detailed structural and electrochemical investigations allowed the characterization of pCND-TCAQ. Furthermore, investigations regarding intramolecular interactions, by means of steady-state and pump-probe transient absorption spectroscopies, allowed detection and characterization of three excited state species, in general, and the pCNDâ¢+-TCAQâ¢- charge-separated state, in particular.
ABSTRACT
In recent years, carbon nanodots (CNDs) have emerged as an environmentally friendly, biocompatible, and inexpensive class of material, whose features sparked interest for a wide range of applications. Most notable is their photoactivity, as exemplified by their strong luminescence. Consequently, CNDs are currently being investigated as active components in photocatalysis, sensing, and optoelectronics. Charge-transfer interactions are common to all these areas. It is therefore essential to be able to fine-tune both the electronic structure of CNDs and the electronic communication in CND-based functional materials. The complex, but not completely deciphered, structure of CNDs necessitates, however, a multifaceted strategy to investigate their fundamental electronic structure and to establish structure-property relationships. Such investigations require a combination of spectroscopic methods, such as ultrafast transient absorption and fluorescence up-conversion techniques, electrochemistry, and modeling of CNDs, both in the absence and presence of other photoactive materials. Only a sound understanding of the dynamics of charge transfer, charge shift, charge transport, etc., with and without light makes much-needed improvements in, for example, photocatalytic processes, in which CNDs are used as either photosensitizers or catalytic centers, possible. This Account addresses the structural, photophysical, and electrochemical properties of CNDs, in general, and the charge-transfer chemistry of CNDs, in particular. Pressure-synthesized CNDs (pCNDs), for which citric acid and urea are used as inexpensive and biobased precursor materials, lie at the center of attention. A simple microwave-assisted thermolytic reaction, performed in sealed vessels, yields pCNDs with a fairly homogeneous size distribution of â¼1-2 nm. The narrow and excitation-independent photoluminescence of pCNDs contrasts with that seen in CNDs synthesized by other techniques, making pCNDs optimal for in-depth physicochemical analyses. The atomistic and electronic structures of CNDs were also analyzed by quantum chemical modeling approaches that led to a range of possible structures, ranging from heavily functionalized, graphene-like structures to disordered amorphous particles containing small sp2 domains. Both the electron-accepting and -donating performances of CNDs make the charge-transfer chemistry of CNDs rather versatile. Both covalent and noncovalent synthetic approaches have been explored, resulting in architectures of various sizes. CNDs, for example, have been combined with molecular materials ranging from electron-donating porphyrins and extended tetrathiafulvalenes to electron-accepting perylendiimides, or nanocarbon materials such as polymer-wrapped single-walled carbon nanotubes. In every case, charge-separated states formed as part of the reaction cascades initiated by photoexcitation. Charge-transfer assemblies including CNDs have also played a role in technological applications: for example, a proof-of-concept dye-sensitized solar cell was designed and tested, in which CNDs were adsorbed on the surface of mesoporous anatase TiO2. The wide range of reported electron-donor-acceptor systems documents the versatility of CNDs as molecular building blocks, whose electronic properties are tunable for the needs of emerging technologies.
ABSTRACT
The carbon monoxide (CO)-photoreleasing molecule [Ru(Me3[9]aneN3)(bpy)(CO)]2+ (RuCO2+; bpy = 2,2'-bipyridine) was prepared and structurally characterized. The photochemical behavior was studied in unprecedented detail for this type of system, using a combination of steady-state and ultrafast transient absorption experiments, which unveiled that 3MLCT and 3dd excited states participate in the decay cascade of photoexcited RuCO2+. Theoretical calculations yield a consistent picture, providing details of the electronic structure of the transient species involved. Our results suggest that the photorelease of CO involves excited states of different electronic nature that are populated sequentially and in parallel. This complex scenario strengthens the idea that the rational design of a good photoCORM is a difficult task to carry out solely using the tools provided by chemical intuition: it is necessary to control by design factors that favor the population of specific photoactive electronic states with respect to those that are not.
ABSTRACT
Molybdenum disulfide nanosheets covalently modified with porphyrin were prepared and fully characterized. Neither the porphyrin absorption nor its fluorescence was notably affected by covalent linkage to MoS2 . The use of transient absorption spectroscopy showed that a complex ping-pong energy-transfer mechanism, namely from the porphyrin to MoS2 and back to the porphyrin, operated. This study reveals the potential of transition-metal dichalcogenides in photosensitization processes.
ABSTRACT
Carbon dots (CDs) and their derivatives are useful platforms for studying electron-donor/acceptor interactions and dynamics therein. Herein, we couple amorphous CDs with phthalocyanines (Pcs) that act as electron donors with a large extended π-surface and intense absorption across the visible range of the solar spectrum. Investigations of the intercomponent interactions by means of steady-state and pump-probe transient absorption spectroscopy reveal symmetry-breaking charge transfer/separation and recombination dynamics within pairs of phthalocyanines. The CDs facilitate the electronic interactions between the phthalocyanines. Thus, our findings suggest that CDs could be used to support electronic couplings in multichromophoric systems and further increase their applicability in organic electronics, photonics, and artificial photosynthesis.