Toward Nano-Specific In Silico NAMs: How to Adjust Nano-QSAR to the Recent Advancements of Nanotoxicology?

The rapid development of engineered nanomaterials (ENMs) causes humans to become increasingly exposed to them. Therefore, a better understanding of the health impact of ENMs is highly demanded. Considering the 3Rs (Replacement, Reduction, and Refinement) principle, in vitro and computational methods are excellent alternatives for testing on animals. Among computational methods, nano-quantitative structure-activity relationship (nano-QSAR), which links the physicochemical and structural properties of EMNs with biological activities, is one of the leading method. The nature of toxicological experiments has evolved over the last decades; currently, one experiment can provide thousands of measurements of the organism's functioning at the molecular level. At the same time, the capacity of the in vitro systems to mimic the human organism is also improving significantly. Hence, the authors would like to discuss whether the nano-QSAR approach follows modern toxicological studies and takes full advantage of the opportunities offered by modern toxicological platforms. Challenges and possibilities for improving data integration are underlined narratively, including the need for a consensus built between the in vitro and the QSAR domains.

Evaluation of Physicochemical Properties of Ipsapirone Derivatives Based on Chromatographic and Chemometric Approaches.

Drug discovery is a challenging process, with many compounds failing to progress due to unmet pharmacokinetic criteria. Lipophilicity is an important physicochemical parameter that affects various pharmacokinetic processes, including absorption, metabolism, and excretion. This study evaluated the lipophilic properties of a library of ipsapirone derivatives that were previously synthesized to affect dopamine and serotonin receptors. Lipophilicity indices were determined using computational and chromatographic approaches. In addition, the affinity to human serum albumin (HSA) and phospholipids was assessed using biomimetic chromatography protocols. Quantitative Structure-Retention Relationship (QSRR) methodologies were used to determine the impact of theoretical descriptors on experimentally determined properties. A multiple linear regression (MLR) model was calculated to identify the most important features, and genetic algorithms (GAs) were used to assist in the selection of features. The resultant models showed commendable predictive accuracy, minimal error, and good concordance correlation coefficient values of 0.876, 0.149, and 0.930 for the validation group, respectively.

Modeling of Anticancer Sulfonamide Derivatives Lipophilicity by Chemometric and Quantitative Structure-Retention Relationships Approaches.

Sulfonamides are a classic group of chemotherapeutic drugs with a broad spectrum of pharmacological action, including anticancer activity. In this work, reversed-phase high-performance liquid chromatography and biomimetic chromatography were applied to characterize the lipophilicity of sulfonamide derivatives with proven anticancer activities against human colon cancer. Chromatographically determined lipophilicity parameters were compared with obtained logP, employing various computational approaches. Similarities and dissimilarities between experimental and computational logP were studied using principal component analysis, cluster analysis, and the sum of ranking differences. Furthermore, quantitative structure-retention relationship modeling was applied to understand the influences of sulfonamide's molecular properties on lipophilicity and affinity to phospholipids.

A Novel Approach to Optimize Hot Melt Impregnation in Terms of Amorphization Efficiency.

In this study, an innovative methodology to optimize amorphization during the hot melt impregnation (HMI) process was proposed. The novelty of this report revolves around the use of thermal analysis in combination with design of experiments (DoEs) to reduce residual crystallinity during the HMI process. As a model formulation, a mixture of ibuprofen (IBU) and Neusilin was used. The main aim of the study was to identify the critical process parameters of HMI and determine their optimal values to assure a robust impregnation process and possibly the highest possible amorphization rate of IBU. In order to realize this, a DoE approach was proposed based on a face-centered composite design involving three factors. The IBU/Neusilin ratio, the feeding rate, and the screw speed were considered as variables, while the residual crystallinity level of IBU, determined using differential scanning calorimetry (DSC), was measured as the response. Additionally, the stability of IBU under HMI was analyzed using high-performance liquid chromatography to estimate the extent of potential degradation. In order to verify the correctness of the DoE model, tested extrudates were manufactured by HMI and the obtained extrudates were thoroughly examined using scanning electron micrography, X-ray powder diffraction, and DSC.

Affinity of Antifungal Isoxazolo[3,4-b]pyridine-3(1H)-Ones to Phospholipids in Immobilized Artificial Membrane (IAM) Chromatography.

Currently, rapid evaluation of the physicochemical parameters of drug candidates, such as lipophilicity, is in high demand owing to it enabling the approximation of the processes of absorption, distribution, metabolism, and elimination. Although the lipophilicity of drug candidates is determined using the shake flash method (n-octanol/water system) or reversed phase liquid chromatography (RP-LC), more biosimilar alternatives to classical lipophilicity measurement are currently available. One of the alternatives is immobilized artificial membrane (IAM) chromatography. The present study is a continuation of our research focused on physiochemical characterization of biologically active derivatives of isoxazolo[3,4-b]pyridine-3(1H)-ones. The main goal of this study was to assess the affinity of isoxazolones to phospholipids using IAM chromatography and compare it with the lipophilicity parameters established by reversed phase chromatography. Quantitative structure-retention relationship (QSRR) modeling of IAM retention using differential evolution coupled with partial least squares (DE-PLS) regression was performed. The results indicate that in the studied group of structurally related isoxazolone derivatives, discrepancies occur between the retention under IAM and RP-LC conditions. Although some correlation between these two chromatographic methods can be found, lipophilicity does not fully explain the affinities of the investigated molecules to phospholipids. QSRR analysis also shows common factors that contribute to retention under IAM and RP-LC conditions. In this context, the significant influences of WHIM and GETAWAY descriptors in all the obtained models should be highlighted.

Lipophilicity Determination of Quaternary (Fluoro)Quinolones by Chromatographic and Theoretical Approaches.

Lipophilicity is a vital physicochemical parameter of a molecule, which affects several biological processes such as absorption, tissue distribution, and pharmacokinetic properties. In this study, evaluation of lipophilicities of a series of novel fluoroquinolone-Safirinium dye hybrids using chromatographic and computational methods is presented. Fluoroquinolone-Safirinium dye hybrids have been synthesized as new dual-acting hydrophilic antibacterial agents. Reversed phase thin-layer chromatography and micellar electrokinetic chromatography experiments were carried out. Furthermore, logP values of the target structures were predicted by means of different software platforms and algorithms. In order to assess similarities and dissimilarities of the obtained lipophilicity indexes, cluster analysis and sum of ranking differences were performed. The significant differences of calculated logP values (α = 0.05, p < 0.001) indicated that an experimental approach is necessary for lipophilicity prediction of this class of antibiotics. Chromatographic data indicated that the newly synthesized hybrid (fluoro)quinolone-based quaternary ammonium derivatives show less lipophilic character than the parent (fluoro)quinolones. Additionally, the chromatographically obtained lipophilicity indexes were evaluated for possible application in quantitative retention-activity relationships. The established lipophilicity models have the potential to predict antimicrobial activities of a series of quaternary (fluoro)quinolones against Bacillus subtilis, Escherichia coli, and Proteus vulgaris.

Lipophilicity Determination of Antifungal Isoxazolo[3,4-b]pyridin-3(1H)-ones and Their N1-Substituted Derivatives with Chromatographic and Computational Methods.

The lipophilicity of a molecule is a well-recognized as a crucial physicochemical factor that conditions the biological activity of a drug candidate. This study was aimed to evaluate the lipophilicity of isoxazolo[3,4-b]pyridine-3(1H)-ones and their N1-substituted derivatives, which demonstrated pronounced antifungal activities. Several methods, including reversed-phase thin layer chromatography (RP-TLC), reversed phase high-performance liquid chromatography (RP-HPLC), and micellar electrokinetic chromatography (MEKC), were employed. Furthermore, the calculated logP values were estimated using various freely and commercially available software packages and online platforms, as well as density functional theory computations (DFT). Similarities and dissimilarities between the determined lipophilicity indices were assessed using several chemometric approaches. Principal component analysis (PCA) indicated that other features beside lipophilicity affect antifungal activities of the investigated derivatives. Quantitative-structure-retention-relationship (QSRR) analysis by means of genetic algorithm-partial least squares (GA-PLS)-was implemented to rationalize the link between the physicochemical descriptors and lipophilicity. Among the studied compounds, structure 16 should be considered as the best starting structure for further studies, since it demonstrated the lowest lipophilic character within the series while retaining biological activity. Sum of ranking differences (SRD) analysis indicated that the chromatographic approach, regardless of the technique employed, should be considered as the best approach for lipophilicity assessment of isoxazolones.

Characterization of antimicrobial and hemolytic properties of short synthetic cationic lipopeptides based on QSAR/QSTR approach.

In this study, we investigated the influence of molecular descriptors of cationic lipopeptides on their antimicrobial activity and hemolytic properties. The quantitative structure-activity relationship and quantitative structure-property relationship models were constructed. The antimicrobial, hemolytic and retention data were used as dependent variable and structural parameters as the independent ones. The obtained results suggest that the chromatographic indexes can be employed for prediction of antibacterial activity and that lipopeptides present nonspecific interaction between erythrocytes and bacterial membranes.

Migration time shift of analytes in micellar electrokinetic chromatography induced by stacking.

A significant shift of migration time of nonretained compounds (ascorbic acid and cysteine) in micellar electrokinetic chromatography was observed under variation of sample matrix composition. The shift was affected by borate buffer concentration in sample matrix, sample injection time, and pH of BGE (80 mM SDS, Tris/HCl). Surprisingly, longer migration time of analyte was recorded at higher pH of separation buffer. These observations were linked to transient isotachophoresis process. Computer simulation with Simul5 software was conducted to support this hypothesis. The manuscript documents rarely reported in the literature phenomenon of isotachophoresis in micellar electrokinetic chromatography. The analytical potential of described observations was also discussed.

Evaluation of sample injection precision in respect to sensitivity in capillary electrophoresis using various injection modes.

A comparative study was conducted to assess the injection precision in capillary electrophoresis for cationic analytes (arecoline, codeine, papaverine). The precision was measured in respect to methods sensitivity in various injection modes in capillary electrophoresis: standard hydrodynamic injection (3.45 kPa for 6 s), large volume sample stacking (3.45 kPa for 40 s), and field-amplified sample injection (10 kV for 65 s). All measurements were conducted for aqueous solutions of standards to minimize the errors linked to the sample preparation step. The methods were submitted to precision assessment at three concentration levels: at the limit of quantification, three-fold and ten-fold of limit of quantification. The results were compared to those from high-performance liquid chromatography as a reference technique. The field-amplified sample injection method was shown to provide greatest sensitivity (quantification limits down to 4 ng/mL for all three tested compounds) but the lowest precision. High-performance liquid chromatography was established as the most reliable technique (coefficient of variation in all intraday experiments was below 1%). It was also shown that with a use of large volume sample injection technique, similar sensitivity as in high-performance liquid chromatography can be easily reached.

Sweeping of hydrophobic amines under inhomogeneous electric field and low surfactant concentration in micellar electrokinetic chromatography.

The influence of sample matrix on sample sweeping in MEKC was examined in the presented manuscript. Significant focusing effect was observed for relatively hydrophobic cationic compounds (emetine, strychnine and quinine) using high ionic strength sample matrix (900 mM H3 PO4 /720 mM Tris) which conductivity was about ninefold higher than utilized BGE. Moreover, the results were obtained using BGE composed of comparatively low surfactant concentration (10 mM SDS) and 40 mM H3 PO4 /32 mM Tris buffer solution. About 200 to 300-fold preconcentration of analytes was reached with the presented method. Basing on experimental results and computer simulation using Simul5 software, hypothetical mechanism of observed phenomenon was proposed.

A comparative quantitative structure-retention relationships study for lipophilicity determination of compounds with a phenanthrene skeleton on cyano-, reversed phase-, and normal phase-thin layer chromatography stationary phases.

The phenanthrene skeleton is an important moiety in medical chemistry as it is present in steroidal drugs used as anti-inflammatory and anti-asthmatic agents as well as synthetic hormones or potassium sparing diuretics. Chromatographic properties of 14 derivatives containing the phenanthrene skeleton in their structure with known lipophilicity have been studied. NP, RP, and cyano-bonded silica stationary phases with three binary mobile phases (acetonitrile-water, acetone-water, and acetone-petroleum ether) were tested. Obtained chromatographic data were correlated with the lipophilicity expressed as values of log partition coefficient (P). The presented study was undertaken to find the best TLC system and chromatographic data processing method in order to predict log P values. Correlations between chromatographic data and measurements of lipophilicity of compounds were presented as results of established quantitative structure-retention relationships. Principal component analysis and cluster analysis were used to investigate the similarities among chromatographic systems.

Modeling of small molecule's affinity to phospholipids using IAM-HPLC and QSRR approach enhanced by similarity-based machine algorithms.

Immobilized artificial membrane chromatography (IAM) has been proposed as a more biosimilar alternative to classical lipophilicity measurement. Determination of small molecule's affinity to phospholipids can be supported for predicting their behavior in the human body. Therefore, a better understanding of the molecular interaction mechanism between small xenobiotics and phospholipids can accelerate drug discovery. Here, the quantitative structure-retention relationships (QSRR) approach was integrated with mechanistic descriptors calculated using Chemicalize software to propose an easy-to-interpretation QSRR model. Considering the heterogeneous character of the data set, locally weighted least squares kernel regression belonging to similarity-based machine learning methods have been applied. The results showed that lipophilicity, charge, and maximum projection area determine molecule binding to phospholipids. Full validation of the obtained model based on OECD recommendations has been performed and the applicability domain was defined using the probability-oriented distance-based approach. The high values of predictive squared correlation coefficient (Q2), and small root mean square error of prediction (RMSEP), 0.812 and 6.739, respectively, confirmed that the obtained QSRR model is not well-fitted to the training data but also showed prediction power. Additionally, only 1.5% of molecules from the training set and 2.8% from the validation test are outside the applicability domain, confirming great predictive abilities.

Predicting zeta potential of liposomes from their structure: A nano-QSPR model for DOPE, DC-Chol, DOTAP, and EPC formulations.

Liposomes, nanoscale spherical structures composed of amphiphilic lipids, hold great promise for various pharmaceutical applications, especially as nanocarriers in targeted drug delivery, due to their biocompatibility, biodegradability, and low immunogenicity. Understanding the factors influencing their physicochemical properties is crucial for designing and optimizing liposomes. In this study, we have presented the kernel-weighted local polynomial regression (KwLPR) nano-quantitative structure-property relationships (nano-QSPR) model to predict the zeta potential (ZP) based on the structure of 12 liposome formulations, including 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE), 3ß-[N-(N',N'-dimethylaminoethane)-carbamoyl]cholesterol (DC-Chol), 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP), and L-α-phosphatidylcholine (EPC). The developed model is well-fitted (R2 = 0.96, RMSEC = 5.76), flexible (QCVloo2 = 0.83, RMSECVloo = 10.77), and reliable (QExt2= 0.89 RMSEExt = 5.17). Furthermore, we have established the formula for computing molecular nanodescriptors for liposomes, based on constituent lipids' molar fractions. Through the correlation matrix and principal component analysis (PCA), we have identified two key structural features affecting liposomes' zeta potential: hydrophilic-lipophilic balance (HLB) and enthalpy of formation. Lower HLB values, indicating a more lipophilic nature, are associated with a higher zeta potential, and thus stability. Higher enthalpy of formation reflects reduced zeta potential and decreased stability of liposomes. We have demonstrated that the nano-QSPR approach allows for a better understanding of how the composition and molecular structure of liposomes affect their zeta potential, filling a gap in ZP nano-QSPR modeling methodologies for nanomaterials (NMs). The proposed proof-of-concept study is the first step in developing a comprehensive and computationally based system for predicting the physicochemical properties of liposomes as one of the most important drug nano-vehicles.

Modification of gradient HPLC method for determination of small molecules' affinity to human serum albumin under column safety conditions: Robustness and chemometrics study.

In the early stages of drug discovery, beyond the biological activity screening, determining the physicochemical properties that affect the distribution of molecules in the human body is an essential step. Plasma protein binding (PPB) is one of the most important investigated endpoints. Nevertheless, the methodology for measuring %PPB is significantly less popular and standardized than other physicochemical properties, like lipophilicity. Here, we proposed how to modify protocols presented by Valko into column safety conditions and evaluated their robustness using fractional factorial design. For robustness testing, four factors were selected: column temperature, mobile phase flow rate, maximum isopropanol concentration in the mobile phase, and buffer pH. Elaborate methods have been applied for the analysis of HSA affinity for three groups of antibiotic-oriented substances that vary in chemical structure: fluoroquinolones, sulfonamides, and tetrazole derivatives. Furthermore, based on the reversed-phase chromatography the workflow of pilot studies was proposed to select molecules that have high affinity to HSA and can not be eluted from the HSA column using the concentration of organic modifier recommended by the column manufacturer.

Green synthesis of 1,3,5-triazine derivatives using a sonochemical protocol.

1,3,5-triazine derivatives are useful compounds with potential applications in various branches of chemical industry, including pharmaceutical chemistry, cosmetic chemistry, photochemistry, and organic chemistry. Due to the growing environmental requirements on conducting efficient, economical, and safe syntheses, development of new methods for synthesizing organic compounds is highly desirable. In this publication, we present a protocol for the synthesis of 1,3,5-triazine derivatives using a sonochemical approach. In as little as 5 min, it is possible to obtain most of the investigated compounds with a yield of over 75%. An undeniable advantage of this method, besides its short time, is the use of water as the solvent. Furthermore, we provide examples that the sonochemical method may be more versatile than the competing microwave method. Analysis conducted using the DOZNTM 2.0 tool revealed that in terms of the 12 principles of green chemistry, the developed sonochemical method is 13 times "greener" than the classical one. Additionally, it has been demonstrated that the investigated molecules are attractive for their application as drug-like compounds.

Exploration and optimisation of structure-activity relationships of new triazole-based C-terminal Hsp90 inhibitors towards in vivo anticancer potency.

The development of new anticancer agents is one of the most urgent topics in drug discovery. Inhibition of molecular chaperone Hsp90 stands out as an approach that affects various oncogenic proteins in different types of cancer. These proteins rely on Hsp90 to obtain their functional structure, and thus Hsp90 is indirectly involved in the pathophysiology of cancer. However, the most studied ATP-competitive inhibition of Hsp90 at the N-terminal domain has proven to be largely unsuccessful clinically. Therefore, research has shifted towards Hsp90 C-terminal domain (CTD) inhibitors, which are also the focus of this study. Our recent discovery of compound C has provided us with a starting point for exploring the structure-activity relationship and optimising this new class of triazole-based Hsp90 inhibitors. This investigation has ultimately led to a library of 33 analogues of C that have suitable physicochemical properties and several inhibit the growth of different cancer types in the low micromolar range. Inhibition of Hsp90 was confirmed by biophysical and cellular assays and the binding epitopes of selected inhibitors were studied by STD NMR. Furthermore, the most promising Hsp90 CTD inhibitor 5x was shown to induce apoptosis in breast cancer (MCF-7) and Ewing sarcoma (SK-N-MC) cells while inducing cause cell cycle arrest in MCF-7 cells. In MCF-7 cells, it caused a decrease in the levels of ERα and IGF1R, known Hsp90 client proteins. Finally, 5x was tested in zebrafish larvae xenografted with SK-N-MC tumour cells, where it limited tumour growth with no obvious adverse effects on normal zebrafish development.

A bibliometric analysis of the recent achievements in pulmonary safety of nanoparticles.

Assessing research activity is an important step for planning future initiatives oriented toward filling the remaining gaps in a field. Therefore, the objective of the current study was to review recently published research on pulmonary toxicity caused by nanomaterials. However, here, instead of reviewing possible toxic effects and discussing their mode of action, the goal was to establish trends considering for example examined so far nanomaterials or used testing strategies. A total of 2316 related articles retrieved from the three most cited databases (PubMed Scopus, Web of Science), selected based on the title and abstract requirements, were used as the source of the review. Based on the bibliometric analysis, the nano-meter metal oxides, and carbon-based nanotubes were identified as the most frequently studied nanomaterials, while quantum dots, which might induce possible harmful effects, were not considered so far. The majority of testing of pulmonary safety is based on in vitro studies with observed growth of the contribution of novel testing strategies, such as 3D lung model, air-liquid interface system, or omic analysis.

Comprehensive Assessment of the Stability of Selected Coxibs in Variable Environmental Conditions along with the Assessment of Their Potential Hepatotoxicity.

Determining the influence of environmental factors on the stability of drugs is very helpful when choosing excipients, storage conditions or packaging materials. In addition, information about possible toxic degradation products enables detecting and avoiding the harmful side effects of the drug. We used the thin-layer chromatographic-densitometric procedure for the assay of five coxibs, conducted degradation studies in various environments and at different temperatures along with the determination of pharmacokinetic parameters. The results were subjected to chemometric analysis, to investigate and visualize the similarities and differences of the studied coxibs. Samples of the tested drug were also analyzed by UPLC-MS/MS in order to identify degradation products, and determine possible drug degradation pathways. Using the human liver cancer HepG2 cell line, the hepatotoxic effect of the degradation products was also determined. It was observed that all substances were relatively stable under the analyzed conditions and degraded more in acidic than alkaline environments. Robenacoxib is the drug that decomposes the fastest, and cimicoxib turned out to be the most stable. Robenacoxib also showed significant hepatotoxicity at the highest tested concentration, which correlates with the high degree of its degradation, and the probable formation of a more hepatoxic product. The obtained mass spectra of compounds formed as a result of hydrolysis of the protonated drug leading to the formation of several product ions, which enabled us to propose probable degradation pathways.

The Effects of Two Kinds of Dietary Interventions on Serum Metabolic Profiles in Haemodialysis Patients.

The goal of this study was to evaluate the effects of two kinds of 24-week dietary interventions in haemodialysis patients, a traditional nutritional intervention without a meal before dialysis (HG1) and implementation of a nutritional intervention with a meal served just before dialysis (HG2), in terms of analysing the differences in the serum metabolic profiles and finding biomarkers of dietary efficacy. These studies were performed in two homogenous groups of patients (n = 35 in both groups). Among the metabolites with the highest statistical significance between HG1 and HG2 after the end of the study, 21 substances were putatively annotated, which had potential significance in both of the most relevant metabolic pathways and those related to diet. After the 24 weeks of the dietary intervention, the main differences between the metabolomic profiles in the HG2 vs. HG1 groups were related to the higher signal intensities from amino acid metabolites: indole-3-carboxaldehyde, 5-(hydroxymethyl-2-furoyl)glycine, homocitrulline, 4-(glutamylamino)butanoate, tryptophol, gamma-glutamylthreonine, and isovalerylglycine. These metabolites are intermediates in the metabolic pathways of the necessary amino acids (Trp, Tyr, Phe, Leu, Ile, Val, Liz, and amino acids of the urea cycle) and are also diet-related intermediates (4-guanidinobutanoic acid, indole-3-carboxyaldehyde, homocitrulline, and isovalerylglycine).