Healable and conductive sulfur iodide for solid-state Li-S batteries.

Solid-state Li-S batteries (SSLSBs) are made of low-cost and abundant materials free of supply chain concerns. Owing to their high theoretical energy densities, they are highly desirable for electric vehicles1-3. However, the development of SSLSBs has been historically plagued by the insulating nature of sulfur4,5 and the poor interfacial contacts induced by its large volume change during cycling6,7, impeding charge transfer among different solid components. Here we report an S9.3I molecular crystal with I2 inserted in the crystalline sulfur structure, which shows a semiconductor-level electrical conductivity (approximately 5.9 × 10-7 S cm-1) at 25 °C; an 11-order-of-magnitude increase over sulfur itself. Iodine introduces new states into the band gap of sulfur and promotes the formation of reactive polysulfides during electrochemical cycling. Further, the material features a low melting point of around 65 °C, which enables repairing of damaged interfaces due to cycling by periodical remelting of the cathode material. As a result, an Li-S9.3I battery demonstrates 400 stable cycles with a specific capacity retention of 87%. The design of this conductive, low-melting-point sulfur iodide material represents a substantial advancement in the chemistry of sulfur materials, and opens the door to the practical realization of SSLSBs.

Modular MPS3-Based Frameworks for Superionic Conduction of Monovalent and Multivalent Ions.

Next-generation batteries based on more sustainable working ions could offer improved performance, safety, and capacity over lithium-ion batteries while also decreasing the cost. Development of next-generation battery technology using "beyond-Li" mobile ions, especially multivalent ions, is limited due to a lack of understanding of solid state conduction of these ions. Here, we introduce ligand-coordinated ions in MPS3-based (M = Mn, Cd) solid host crystals to simultaneously increase the size of the interlayer spacing, through which the ions can migrate, and screen the charge-dense ions. The ligand-assisted conduction mechanism enables ambient temperature superionic conductivity of various next-generation mobile ions in the electronically insulating MPS3-based solid. Without the coordinating ligands, all of the compounds show little to no ionic conductivity. Pulsed-field gradient nuclear magnetic resonance spectroscopy suggests that the ionic conduction occurs through a hopping mechanism, where the cations are moving between H2O molecules, instead of a vehicular mechanism which has been observed in other hydrated layered solids. This modular system not only facilitates tailoring to different potential applications but also enables us to probe the effect of different host structures, mobile ions, and coordinating ligands on the ionic conductivity. This research highlights the influence of cation charge density, diffusion channel size, and effective charge screening on ligand-assisted solid state ionic conductivity. The insights gained can be applied in the design of other ligand-assisted solid state ionic conductors, which will be especially impactful in realizing solid state multivalent ionic conductors. Additionally, the ion-intercalated MPS3-based frameworks could potentially serve as a universal solid state electrolyte for various next-generation battery chemistries.

Composition and Structure of the solid electrolyte interphase on Na-Ion Anodes Revealed by Exo- and Endogenous Dynamic Nuclear Polarization─NMR Spectroscopy.

Sodium ion batteries (SIB) are among the most promising devices for large scale energy storage. Their stable and long-term performance depends on the formation of the solid electrolyte interphase (SEI), a nanosized, heterogeneous and disordered layer, formed due to degradation of the electrolyte at the anode surface. The chemical and structural properties of the SEI control the charge transfer process at the electrode-electrolyte interface, thus, there is great interest in determining these properties for understanding, and ultimately controlling, SEI functionality. However, the study of the SEI is notoriously challenging due to its heterogeneous nature and minute quantity. In this work, we present a powerful approach for probing the SEI based on solid state NMR spectroscopy with increased sensitivity from dynamic nuclear polarization (DNP). Utilizing exogenous (organic radicals) and endogenous (paramagnetic metal ion dopants) DNP sources, we obtain not only a detailed compositional map of the SEI but also, for the first time for the native SEI, determine the spatial distribution of its constituent phases. Using this approach, we perform a thorough investigation of the SEI formed on Li4Ti5O12 used as a SIB anode. We identify a compositional gradient, from organic phases at the electrolyte interface to inorganic phases toward the anode surface. We find that the use of fluoroethylene carbonate as an electrolyte additive leads to performance degradation which can be attributed to formation of a thicker SEI, rich in NaF and carbonates. We expect that this methodology can be extended to examine other titanate anodes and new electrolyte compositions, offering a unique tool for SEI investigations to enable the development of effective and long-lasting SIBs.

Structural Evolution in Disordered Rock Salt Cathodes.

Li-excess Mn-based disordered rock salt oxides (DRX) are promising Li-ion cathode materials owing to their cost-effectiveness and high theoretical capacities. It has recently been shown that Mn-rich DRX Li1+xMnyM1-x-yO2 (y ≥ 0.5, M are hypervalent ions such as Ti4+ and Nb5+) exhibit a gradual capacity increase during the first few charge-discharge cycles, which coincides with the emergence of spinel-like domains within the long-range DRX structure coined as "δ phase". Here, we systematically study the structural evolution upon heating of Mn-based DRX at different levels of delithiation to gain insight into the structural rearrangements occurring during battery cycling and the mechanism behind δ phase formation. We find in all cases that the original DRX structure relaxes to a δ phase, which in turn leads to capacity enhancement. Synchrotron X-ray and neutron diffraction were employed to examine the structure of the δ phase, revealing that selective migration of Li and Mn/Ti cations to different crystallographic sites within the DRX structure leads to the observed structural rearrangements. Additionally, we show that both Mn-rich (y ≥ 0.5) and Mn-poor (y < 0.5) DRX can thermally relax into a δ phase after delithiation, but the relaxation processes in these distinct compositions lead to different domain structures. Thermochemical studies and in situ heating XRD experiments further indicate that the structural relaxation has a larger thermodynamic driving force and a lower activation energy for Mn-rich DRX, as compared to Mn-poor systems, which underpins why this structural evolution is only observed for Mn-rich systems during battery cycling.

Revealing the Chemical and Structural Complexity of Electrochemical Ion Exchange in Layered Oxide Materials.

Soft chemistry techniques, such as ion exchange, hold great potential for the development of battery electrode materials that cannot be stabilized via conventional equilibrium synthesis methods. Nevertheless, the intricate mechanisms governing ion exchange remain elusive. Herein, we investigate the evolution of the long-range and local structure, as well as the ion (de)intercalation mechanism during electrochemical Li-to-Na ion exchange initiated from an O3-type lithium-layered oxide cathode. The in situ-formed mixed-cation electrolyte leads to competitive intercalation of Li and Na ions. While Li ion intercalation predominates at the beginning of initial discharge, Na ion cointercalation into a different layer results in ion redistribution and phase separation, with the emergence of a P3-Na phase alongside an O3-Li phase. Further, this study spatially resolves the heterogeneous nature of electrochemical ion exchange reactions within individual particles and provides insights into the correlations between local Ni redox processes and phase separation. Overall, electrochemical ion exchange leads to a mixed-phase cathode and alters its reaction kinetics. Those findings have important implications for the development of new metastable materials for renewable energy devices and ion separation applications.

Topochemical Modulations from 1D Iron Fluoride Precursor to 3D Frameworks.

Topochemical reactions are powerful pathways to modify inorganic extended structures, but the present approaches are limited by the degrees of freedom to tune the structural connectivity and dimensionality. In this work, we unveil a new topochemical bottom-up approach to tailor three-dimensional (3D) iron fluoride frameworks from the same one-dimensional (1D) FeF3.3H2O (IF) precursor upon reacting with iodide-based reagents (AI; A+ = Na+, K+, and NH4+). To elucidate their formation mechanism, a series of topochemical reactions are performed by varying the concentration of precursors, reaction temperatures, and durations, and their corresponding products are analyzed through X-ray diffraction, nuclear magnetic resonance, and Mössbauer spectroscopy techniques. Although the lower molar ratio of AI:IF (≈0.25:1.0) produces the same hexagonal tungsten bronze (HTB)-type AxFeF3, the topochemical reactions with higher AI:IF ratios yield weberite-Na1.95Fe2F7, tetragonal tungsten bronze (TTB)-K0.58FeF3, and pyrochlore-NH4Fe2F6 phases. Our density functional theory calculations attribute the formation of iron fluoride phases to their thermodynamic stability. Moreover, kinetics also play an important role in enabling weberite and HTB fluorides with high purity, while the pyrochlore-NH4Fe2F6 retains a minor HTB-(NH4)xFeF3 impurity. Overall, this work shows a new possibility of modulating the low-dimensional precursor to attain 3D frameworks with different structural arrangements via topochemical approaches.

Reversible Mn2+/Mn4+ double redox in lithium-excess cathode materials.

There is an urgent need for low-cost, resource-friendly, high-energy-density cathode materials for lithium-ion batteries to satisfy the rapidly increasing need for electrical energy storage. To replace the nickel and cobalt, which are limited resources and are associated with safety problems, in current lithium-ion batteries, high-capacity cathodes based on manganese would be particularly desirable owing to the low cost and high abundance of the metal, and the intrinsic stability of the Mn4+ oxidation state. Here we present a strategy of combining high-valent cations and the partial substitution of fluorine for oxygen in a disordered-rocksalt structure to incorporate the reversible Mn2+/Mn4+ double redox couple into lithium-excess cathode materials. The lithium-rich cathodes thus produced have high capacity and energy density. The use of the Mn2+/Mn4+ redox reduces oxygen redox activity, thereby stabilizing the materials, and opens up new opportunities for the design of high-performance manganese-rich cathodes for advanced lithium-ion batteries.

Stacking Faults Assist Lithium-Ion Conduction in a Halide-Based Superionic Conductor.

In the pursuit of urgently needed, energy dense solid-state batteries for electric vehicle and portable electronics applications, halide solid electrolytes offer a promising path forward with exceptional compatibility against high-voltage oxide electrodes, tunable ionic conductivities, and facile processing. For this family of compounds, synthesis protocols strongly affect cation site disorder and modulate Li+ mobility. In this work, we reveal the presence of a high concentration of stacking faults in the superionic conductor Li3YCl6 and demonstrate a method of controlling its Li+ conductivity by tuning the defect concentration with synthesis and heat treatments at select temperatures. Leveraging complementary insights from variable temperature synchrotron X-ray diffraction, neutron diffraction, cryogenic transmission electron microscopy, solid-state nuclear magnetic resonance, density functional theory, and electrochemical impedance spectroscopy, we identify the nature of planar defects and the role of nonstoichiometry in lowering Li+ migration barriers and increasing Li site connectivity in mechanochemically synthesized Li3YCl6. We harness paramagnetic relaxation enhancement to enable 89Y solid-state NMR and directly contrast the Y cation site disorder resulting from different preparation methods, demonstrating a potent tool for other researchers studying Y-containing compositions. With heat treatments at temperatures as low as 333 K (60 °C), we decrease the concentration of planar defects, demonstrating a simple method for tuning the Li+ conductivity. Findings from this work are expected to be generalizable to other halide solid electrolyte candidates and provide an improved understanding of defect-enabled Li+ conduction in this class of Li-ion conductors.

Cation-disordered rocksalt-type high-entropy cathodes for Li-ion batteries.

High-entropy (HE) ceramics, by analogy with HE metallic alloys, are an emerging class of solid solutions composed of a large number of species. These materials offer the benefit of large compositional flexibility and can be used in a wide variety of applications, including thermoelectrics, catalysts, superionic conductors and battery electrodes. We show here that the HE concept can lead to very substantial improvements in performance in battery cathodes. Among lithium-ion cathodes, cation-disordered rocksalt (DRX)-type materials are an ideal platform within which to design HE materials because of their demonstrated chemical flexibility. By comparing a group of DRX cathodes containing two, four or six transition metal (TM) species, we show that short-range order systematically decreases, whereas energy density and rate capability systematically increase, as more TM cation species are mixed together, despite the total metal content remaining fixed. A DRX cathode with six TM species achieves 307 mAh g-1 (955 Wh kg-1) at a low rate (20 mA g-1), and retains more than 170 mAh g-1 when cycling at a high rate of 2,000 mA g-1. To facilitate further design in this HE DRX space, we also present a compatibility analysis of 23 different TM ions, and successfully synthesize a phase-pure HE DRX compound containing 12 TM species as a proof of concept.

The interplay between thermodynamics and kinetics in the solid-state synthesis of layered oxides.

In the synthesis of inorganic materials, reactions often yield non-equilibrium kinetic byproducts instead of the thermodynamic equilibrium phase. Understanding the competition between thermodynamics and kinetics is a fundamental step towards the rational synthesis of target materials. Here, we use in situ synchrotron X-ray diffraction to investigate the multistage crystallization pathways of the important two-layer (P2) sodium oxides Na0.67MO2 (M = Co, Mn). We observe a series of fast non-equilibrium phase transformations through metastable three-layer O3, O3' and P3 phases before formation of the equilibrium two-layer P2 polymorph. We present a theoretical framework to rationalize the observed phase progression, demonstrating that even though P2 is the equilibrium phase, compositionally unconstrained reactions between powder precursors favour the formation of non-equilibrium three-layered intermediates. These insights can guide the choice of precursors and parameters employed in the solid-state synthesis of ceramic materials, and constitutes a step forward in unravelling the complex interplay between thermodynamics and kinetics during materials synthesis.

Probing reaction processes and reversibility in Earth-abundant Na3FeF6 for Na-ion batteries.

Sodium (Na)-ion batteries are the most explored 'beyond-Li' battery systems, yet their energy densities are still largely limited by the positive electrode material. Na3FeF6 is a promising Earth-abundant containing electrode and operates through a conversion-type charge-discharge reaction associated with a high theoretical capacity (336 mA h g-1). In practice, however, only a third of this capacity is achieved during electrochemical cycling. In this study, we demonstrate a new rapid and environmentally-friendly assisted-microwave method for the preparation of Na3FeF6. A comprehensive understanding of charge-discharge processes and of the reactivity of the cycled electrode samples is achieved using a combination of electrochemical tests, synchrotron X-ray diffraction, 57Fe Mössbauer spectroscopy, X-ray photoelectron spectroscopy, magnetometry, and 23Na/19F solid-state nuclear magnetic resonance (NMR) complemented with first principles calculations of NMR properties. We find that the primary performance limitation of the Na3FeF6 electrode is the sluggish kinetics of the conversion reaction, while the methods employed for materials synthesis and electrode preparation do not have a significant impact on the conversion efficiency and reversibility. Our work confirms that Na3FeF6 undergoes conversion into NaF and Fe(s) nanoparticles. The latter are found to be prone to oxidation prior to ex situ measurements, thus necessitating a robust analysis of the stable phases (here, NaF) formed upon conversion.

Exploring Oxygen Activity in the High Energy P2-Type Na0.78Ni0.23Mn0.69O2 Cathode Material for Na-Ion Batteries.

Large-scale electric energy storage is fundamental to the use of renewable energy. Recently, research and development efforts on room-temperature sodium-ion batteries (NIBs) have been revitalized, as NIBs are considered promising, low-cost alternatives to the current Li-ion battery technology for large-scale applications. Herein, we introduce a novel layered oxide cathode material, Na0.78Ni0.23Mn0.69O2. This new compound provides a high reversible capacity of 138 mAh g-1 and an average potential of 3.25 V vs Na+/Na with a single smooth voltage profile. Its remarkable rate and cycling performances are attributed to the elimination of the P2-O2 phase transition upon cycling to 4.5 V. The first charge process yields an abnormally excess capacity, which has yet to be observed in other P2 layered oxides. Metal K-edge XANES results show that the major charge compensation at the metal site during Na-ion deintercalation is achieved via the oxidation of nickel (Ni2+) ions, whereas, to a large extent, manganese (Mn) ions remain in their Mn4+ state. Interestingly, electron energy loss spectroscopy (EELS) and soft X-ray absorption spectroscopy (sXAS) results reveal differences in electronic structures in the bulk and at the surface of electrochemically cycled particles. At the surface, transition metal ions (TM ions) are in a lower valence state than in the bulk, and the O K-edge prepeak disappears. On the basis of previous reports on related Li-excess LIB cathodes, it is proposed that part of the charge compensation mechanism during the first cycle takes place at the lattice oxygen site, resulting in a surface to bulk transition metal gradient. We believe that by optimizing and controlling oxygen activity, Na layered oxide materials with higher capacities can be designed.

ß-NaMnO2: a high-performance cathode for sodium-ion batteries.

There is much interest in Na-ion batteries for grid storage because of the lower projected cost compared with Li-ion. Identifying Earth-abundant, low-cost, and safe materials that can function as intercalation cathodes in Na-ion batteries is an important challenge facing the field. Here we investigate such a material, ß-NaMnO2, with a different structure from that of NaMnO2 polymorphs and other compounds studied extensively in the past. It exhibits a high capacity (of ca. 190 mA h g(-1) at a rate of C/20), along with a good rate capability (142 mA h g(-1) at a rate of 2C) and a good capacity retention (100 mA h g(-1)after 100 Na extraction/insertion cycles at a rate of 2C). Powder XRD, HRTEM, and (23)Na NMR studies revealed that this compound exhibits a complex structure consisting of intergrown regions of α-NaMnO2 and ß-NaMnO2 domains. The collapse of the long-range structure at low Na content is expected to compromise the reversibility of the Na extraction and insertion processes occurring upon charge and discharge of the cathode material, respectively. Yet stable, reproducible, and reversible Na intercalation is observed.

The Limited Incorporation and Role of Fluorine in Mn-rich Disordered Rocksalt Cathodes.

Disordered rocksalt oxide (DRX) cathodes are promising candidates for next-generation Co- and Ni-free Li-ion batteries. While fluorine substitution for oxygen has been explored as an avenue to enhance their performance, the amount of fluorine incorporated into the DRX structure is particularly challenging to quantify and impedes our ability to relate fluorination to electrochemical performance. Herein, an experimental-computational method combining 7Li and 19F solid-state nuclear magnetic resonance, and ab initio cluster expansion Monte Carlo simulations, is developed to determine the composition of DRX oxyfluorides. Using this method, the synthesis of Mn- and Ti-containing DRX via standard high temperature sintering and microwave heating is optimized. Further, the upper fluorination limit attainable using each of these two synthesis routes is established for various Mn-rich DRX compounds. A comparison of their electrochemical performance reveals that the capacity and capacity retention mostly depend on the Mn content, while fluorination plays a secondary role.

Improved Mechanical Strength without Sacrificing Li-Ion Transport in Polymer Electrolytes.

Next-generation batteries demand solid polymer electrolytes (SPEs) with rapid ion transport and robust mechanical properties. However, many SPEs with liquid-like Li+ transport mechanisms suffer a fundamental trade-off between conductivity and strength. Dynamic polymer networks can improve bulk mechanics with minimal impact to segmental relaxation or ionic conductivity. This study demonstrates a system where a single polymer-bound ligand simultaneously dissociates Li+ and forms long-lived Ni2+ networks. The polymer comprises an ethylene oxide backbone and imidazole (Im) ligands, blended with Li+ and Ni2+ salts. Ni2+-Im dynamic cross-links result in the formation of a rubbery plateau resulting in, consequently, storage modulus improvement by a factor of 133× with the introduction of Ni2+ at rNi = 0.08, from 0.014 to 1.907 MPa. Even with Ni2+ loading, the high Li+ conductivity of 3.7 × 10-6 S/cm is retained at 90 °C. This work demonstrates that decoupling of ion transport and bulk mechanics can be readily achieved by the addition of multivalent metal cations to polymers with chelating ligands.

An Experimental Approach to Assess Fluorine Incorporation into Disordered Rock Salt Oxide Cathodes.

Disordered rock salt oxides (DRX) have shown great promise as high-energy-density and sustainable Li-ion cathodes. While partial substitution of oxygen for fluorine in the rock salt framework has been related to increased capacity, lower charge-discharge hysteresis, and longer cycle life, fluorination is poorly characterized and controlled. This work presents a multistep method aimed at assessing fluorine incorporation into DRX cathodes, a challenging task due to the difficulty in distinguishing oxygen from fluorine using X-ray and neutron-based techniques and the presence of partially amorphous impurities in all DRX samples. This method is applied to "Li1.25Mn0.25Ti0.5O1.75F0.25" prepared by solid-state synthesis and reveals that the presence of LiF impurities in the sample and F content in the DRX phase is well below the target. Those results are used for compositional optimization, and a synthesis product with drastically reduced LiF content and a DRX stoichiometry close to the new target composition (Li1.25Mn0.225Ti0.525O1.85F0.15) is obtained, demonstrating the effectiveness of the strategy. The analytical method is also applied to "Li1.33Mn0.33Ti0.33O1.33F0.66" obtained via mechanochemical synthesis, and the results confirm that much higher fluorination levels can be achieved via ball-milling. Finally, a simple and rapid water washing procedure is developed to reduce the impurity content in as-prepared DRX samples: this procedure results in a ca. 10% increase in initial discharge capacity and a ca. 11% increase in capacity retention after 25 cycles for Li1.25Mn0.25Ti0.50O1.75F0.25. Overall, this work establishes new analytical and material processing methods that enable the development of more robust design rules for high-energy-density DRX cathodes.

Ion and Water Dynamics in the Transition from Dry to Wet Conditions in Salt-Doped PEG.

The influence of the water content on ion and water transport mechanisms in polymer membranes under low to moderate hydration conditions remains poorly understood. In this study, we combine ion and water diffusivity (PFG-NMR) measurements with atomistic molecular dynamics simulations to better understand transport processes in hydrated salt-doped poly(ethylene glycol). Above the water percolation threshold, the experimental and simulated diffusivities are in good agreement with the free volume transport models. At low hydration levels, unlike dry systems, ion diffusion cannot be described by polymer segmental dynamics alone. We rationalize such observations by the interplay between ion-water and ion-polymer solvation of cations and between ion-water and cation-anion interactions for anions. Further, we demonstrate that a two-state model combining ion-water solvation and free volume transport can describe water dynamics across the entire hydration range of interest. Our findings provide a more encompassing analysis of ion and water transport in hydrated polyelectrolytes, specifically in the low hydration regime.

Chemical Origin of in Situ Carbon Dioxide Outgassing from a Cation-Disordered Rock Salt Cathode.

In situ carbon dioxide (CO2) outgassing is a common phenomenon in lithium-ion batteries (LiBs), primarily due to parasitic side reactions at the cathode-electrolyte interface. However, little is known about the chemical origins of the in situ CO2 released from emerging Li-excess cation-disordered rock salt (DRX) cathodes. In this study, we selectively labeled various carbon sources with 13C in cathodes containing a representative DRX material, Li1.2Mn0.4Ti0.4O2 (LMTO), and performed differential electrochemical mass spectrometry (DEMS) during galvanostatic cycling in a carbonate-based electrolyte. When charging LMTO cathodes, electrolyte solvent (EC) decomposition is the dominant source of the CO2 outgassing. The amount of EC-originated CO2 is strongly correlated with the total surface area of carbon black in the electrode, revealing the critical role of electron-conducting carbon additives in the electrolyte degradation mechanisms. In addition, unusual bimodal CO2 evolution during the first cycle is found to originate from carbon black oxidation. Overall, the underlying chemical origin of in situ CO2 release during battery cycling is highly voltage- and cycle-dependent. This work further provides insights into improving the stability of DRX cathodes in LiBs and is envisioned to help guide future relevant material design to mitigate parasitic reactions in DRX-based batteries.

Overcoming low initial coulombic efficiencies of Si anodes through prelithiation in all-solid-state batteries.

All-solid-state batteries using Si as the anode have shown promising performance without continual solid-electrolyte interface (SEI) growth. However, the first cycle irreversible capacity loss yields low initial Coulombic efficiency (ICE) of Si, limiting the energy density. To address this, we adopt a prelithiation strategy to increase ICE and conductivity of all-solid-state Si cells. A significant increase in ICE is observed for Li1Si anode paired with a lithium cobalt oxide (LCO) cathode. Additionally, a comparison with lithium nickel manganese cobalt oxide (NCM) reveals that performance improvements with Si prelithiation is only applicable for full cells dominated by high anode irreversibility. With this prelithiation strategy, 15% improvement in capacity retention is achieved after 1000 cycles compared to a pure Si. With Li1Si, a high areal capacity of up to 10 mAh cm-2 is attained using a dry-processed LCO cathode film, suggesting that the prelithiation method may be suitable for high-loading next-generation all-solid-state batteries.

Giant Modulation of Refractive Index from Picoscale Atomic Displacements.

It is shown that structural disorder-in the form of anisotropic, picoscale atomic displacements-modulates the refractive index tensor and results in the giant optical anisotropy observed in BaTiS3, a quasi-1D hexagonal chalcogenide. Single-crystal X-ray diffraction studies reveal the presence of antipolar displacements of Ti atoms within adjacent TiS6 chains along the c-axis, and threefold degenerate Ti displacements in the a-b plane. 47/49Ti solid-state NMR provides additional evidence for those Ti displacements in the form of a three-horned NMR lineshape resulting from a low symmetry local environment around Ti atoms. Scanning transmission electron microscopy is used to directly observe the globally disordered Ti a-b plane displacements and find them to be ordered locally over a few unit cells. First-principles calculations show that the Ti a-b plane displacements selectively reduce the refractive index along the ab-plane, while having minimal impact on the refractive index along the chain direction, thus resulting in a giant enhancement in the optical anisotropy. By showing a strong connection between structural disorder with picoscale displacements and the optical response in BaTiS3, this study opens a pathway for designing optical materials with high refractive index and functionalities such as large optical anisotropy and nonlinearity.