Damage thresholds of silicon-based cameras for in-band and out-of-band laser expositions.

The damage threshold of silicon-based cameras to laser irradiation is measured for continuous wave lasers at both in-band and out-of-band wavelengths. Clarifications about the various kinds of damage reported in the literature are also presented and explained through various tests. For increasing laser intensities, the sequence of laser effects on cameras usually starts from dazzling, to a decrease of the pixel response up to the complete neutralization of its pixel matrix. However, the intensity range for the complete sequence of these laser effects can strongly depend on the laser wavelengths and the tested cameras, particularly for out-of-band laser wavelengths. The proposed definitions of damage thresholds presented in this work offer a basis for the future comparison of results between different studies.

Mid-infrared nonlinear absorption in As2S3 chalcogenide glass.

We report mid-infrared (MIR) nonlinear absorption in As2S3 glasses which results from two-photon excitation of valence electron to the Urbach extension followed by strong linear absorption of excited states. The measured MIR nonlinear absorption can be 3 to 4 orders of magnitude stronger than the two-photon absorption in the near-infrared for similar laser intensities and does not result from contaminants, but it is intrinsic to As2S3 glasses. As2S3 fibers are widely used to generate supercontinuum by pumping them with high peak power laser pulses. For a 100 kilowatt peak power MIR soliton propagating in single mode As2S3 fiber, the nonlinear absorption can be of similar magnitude than the fiber background loss. Finally, for laser peak power around 1 MW, the MIR nonlinear absorption can be ~2 orders of magnitude larger than the fiber background loss in single mode As2S3 fiber.

Multioctave infrared supercontinuum generation in large-core As2S3 fibers.

We report on infrared supercontinuum (SC) generation through laser filamentation and subsequent nonlinear propagation in a step-index As2S3 fiber. The 100 µm core and high-purity As2S3 fiber used exhibit zero-dispersion wavelength around 4.5 µm, a mid-infrared background loss of 0.2 dB/m, and a maximum loss of only 0.55 dB/m at the S-H absorption peak around 4.05 µm. When pumping with ultrashort laser pulses slightly above the S-H absorption band, broadband infrared supercontinua were generated with a 20 dB spectral flatness spanning from 1.5 up to 7 µm. The efficiency and spectral shape of the SC produced by ultrashort pulses in large-core As2S3 fiber are mainly determined by its dispersion, the S-H contaminant absorption, and the mid-infrared nonlinear absorption.

Kilometer range filamentation.

We demonstrate for the first time the possibility to generate long plasma channels up to a distance of 1 km, using the terawatt femtosecond T&T laser facility. The plasma density was optimized by adjusting the chirp, the focusing and beam diameter. The interaction of filaments with transparent and opaque targets was studied.

Mid-infrared supercontinuum generation in fluoroindate fiber.

We report the generation of mid-infrared supercontinua in a step-index fluoroindate-based fiber. The large core of the fluoroindate fiber allows the guiding of multiwatt laser power over a broad spectral range. These fibers exhibit zero dispersion at 1.83 µm, minimal loss of 0.1 dB/m at 3.2 µm up to only 0.8 dB/m at 5 µm. These specifications enable mid-infrared supercontinuum generation and propagation with low loss. By using mid-infrared ultrashort laser pulses from an optical parametric amplifier, we demonstrate generation of a 20 dB spectral flatness supercontinua from 2.7 to 4.7 µm in the fluoroindate fiber, which is twice the spectral broadening compared to a ZBLAN fiber under similar conditions.

Standoff Interaction Assessment Using High-Energy Laser-Induced Oxidation Spectroscopy.

In light of the widespread use of high-energy lasers (HELs) for a variety of purposes, for example, standoff (>100 m) applications, will require the ability to monitor in real time the interaction with processed materials. While multiple sensing methods have been successfully developed for industrial HEL systems operating at close range, they are not compatible with the unique requirements of long-distance applications. Here, high-energy laser-induced oxidation spectroscopy (HELIOS) is demonstrated on carbon steel coupons as an efficient standoff assessment method compatible with long distance HEL applications. Acute monitoring of spectral features from thermally excited iron atoms and oxides, corroborated with real-time temperature measurements, reveals the interaction mechanisms at play.

Laser guiding of Tesla coil high voltage discharges.

We have investigated the guiding and triggering of discharges from a Tesla coil type 280 kHz AC high voltage source using filaments created by a femtosecond Terawatt laser pulse. Without the laser the discharges were maximum 30 cm long. With the laser straight, guided discharges up to 110 cm length were detected. The discharge length was limited by the voltage amplitude of the Tesla coil.

Water vapor concentration measurement in air using filament-induced fluorescence spectroscopy.

Water vapor fluorescence in air induced by femtosecond laser filaments was systematically investigated. The fluorescence signal intensity was found to be linearly proportional to the water vapor concentration, which opens up the possibility of absolute humidity measurements, even remotely.

Arrest of self-focusing collapse in femtosecond air filaments: higher order Kerr or plasma defocusing?

Experimentally measured conical emission rings on the blue side of the filament supercontinuum of a 800 nm 50 fs pulse in air are reproduced in simulations with plasma and the third-order Kerr as the nonlinear terms. This agreement indicates plasma as the dominant mechanism arresting the self-focusing collapse. The higher order Kerr terms with the recently measured coefficients stop the collapse at a lower intensity than the plasma does and lead to the spherical angle-wavelength spectrum without blueshifted rings.

Dynamic behavior of postfilamentation Raman pulses.

We report on the postfilamentation behavior of a Stokes pulse created from intense and collimated ultrashort pulses propagating in air. A systematic analysis of the pulse propagation revealed that the redshifted Raman pulse produced during filamentation had a larger divergence than the postfilamentation intense pump pulse. Also, the analysis of the far-field Stokes transverse ring revealed that the intensity in this ionization-free light channel is still sufficiently high to induce stimulated Raman scattering after ionization had ended. This behavior further extends the potential of filamentation to remotely induce third-order nonlinearities.

Laser-guided energetic discharges over large air gaps by electric-field enhanced plasma filaments.

Recent works on plasma channels produced during the propagation of ultrashort and intense laser pulses in air demonstrated the guiding of electric discharges along the laser path. However, the short plasma lifetime limits the length of the laser-guided discharge. In this paper, the conductivity and lifetime of long plasma channels produced by ultrashort laser pulses is enhanced efficiently over many orders of magnitude by the electric field of a hybrid AC-DC high-voltage source. The AC electric pulse from a Tesla coil allowed to stimulate and maintain the highly conductive channel during few milliseconds in order to guide a subsequent 500 times more energetic discharge from a 30-kV DC source. This DC discharge was laser-guided over an air gap length of two metres, which is more than two orders of magnitude longer than the expected natural discharge length. Long plasma channel induced by laser pulses and stimulated by an external high-voltage source opens the way for wireless and efficient transportation of energetic current pulses over long air gaps and potentially for guiding lightning.