Highin vitroactivity of gold and silver nanoparticles from Solanum mammosum L. against SARS-CoV-2 surrogate Phi6 and viral model PhiX174.

The search for new strategies to curb the spread of the SARS-CoV-2 coronavirus, which causes COVID-19, has become a global priority. Various nanomaterials have been proposed as ideal candidates to inactivate the virus; however, because of the high level of biosecurity required for their use, alternative models should be determined. This study aimed to compare the effects of two types of nanomaterials gold (AuNPs) and silver nanoparticles (AgNPs), recognized for their antiviral activity and affinity with the coronavirus spike protein using PhiX174 and enveloped Phi6 bacteriophages as models. To reduce the toxicity of nanoparticles, a species known for its intermediate antiviral activity,Solanum mammosumL. (Sm), was used. NPs prepared with sodium borohydride (NaBH4) functioned as the control. Antiviral activity against PhiX174 and Phi6 was analyzed using its seed, fruit, leaves, and essential oil; the leaves were the most effective on Phi6. Using the aqueous extract of the leaves, AuNPs-Sm of 5.34 ± 2.25 nm and AgNPs-Sm of 15.92 ± 8.03 nm, measured by transmission electron microscopy, were obtained. When comparing NPs with precursors, both gold(III) acetate and silver nitrate were more toxic than their respective NPs (99.99% at 1 mg ml-1). The AuNPs-Sm were less toxic, reaching 99.30% viral inactivation at 1 mg ml-1, unlike the AgNPs-Sm, which reached 99.94% at 0.01 mg ml-1. In addition, cell toxicity was tested in human adenocarcinoma alveolar basal epithelial cells (A549) and human foreskin fibroblasts. Gallic acid was the main component identified in the leaf extract using high performance liquid chromatography with diode array detection (HPLC-DAD). The FT-IR spectra showed the presence of a large proportion of polyphenolic compounds, and the antioxidant analysis confirmed the antiradical activity. The control NPs showed less antiviral activity than the AuNPs-Sm and AgNPs-Sm, which was statistically significant; this demonstrates that both theS. mammosumextract and its corresponding NPs have a greater antiviral effect on the surrogate Phi bacteriophage, which is an appropriate model for studying SARS-CoV-2.

Photochemical Reduction of Silver Nanoparticles on Diatoms.

In this work, the photochemical reduction method was used at 440 or 540 nm excitation wavelengths to optimize the deposition of silver nanoparticles on the diatom surface as a potential DNA biosensor. The as-synthesized nanocomposites were characterized by ultraviolet-visible spectroscopy (UV-Vis), Fourier transforms infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), scanning transmission electron microscopy (STEM), fluorescence microscopy, and Raman spectroscopy. Our results revealed a 5.5-fold enhancement in the fluorescence response of the nanocomposite irradiated at 440 nm with DNA. The enhanced sensitivity comes from the optical coupling of the guided-mode resonance of the diatoms and the localized surface plasmon of the silver nanoparticles interacting with the DNA. The advantage of this work involves the use of a low-cost green method to optimize the deposition of plasmonic nanoparticles on diatoms as an alternative fabrication method for fluorescent biosensors.

Bioinspired Synthesis of Magnetic Nanoparticles Based on Iron Oxides Using Orange Waste and Their Application as Photo-Activated Antibacterial Agents.

Magnetic nanoparticles based on iron oxides (MNPs-Fe) have been proposed as photothermal agents (PTAs) within antibacterial photothermal therapy (PTT), aiming to counteract the vast health problem of multidrug-resistant bacterial infections. We present a quick and easy green synthesis (GS) to prepare MNPs-Fe harnessing waste. Orange peel extract (organic compounds) was used as a reducing, capping, and stabilizing agent in the GS, which employed microwave (MW) irradiation to reduce the synthesis time. The produced weight, physical-chemical features and magnetic features of the MNPs-Fe were studied. Moreover, their cytotoxicity was assessed in animal cell line ATCC RAW 264.7, as well as their antibacterial activity against Staphylococcus aureus and Escherichia coli. We found that the 50GS-MNPs-Fe sample (prepared by GS, with 50% v/v of NH4OH and 50% v/v of orange peel extract) had an excellent mass yield. Its particle size was ~50 nm with the presence of an organic coating (terpenes or aldehydes). We believe that this coating improved the cell viability in extended periods (8 days) of cell culture with concentrations lower than 250 µg·mL-1, with respect to the MNPs-Fe obtained by CO and single MW, but it did not influence the antibacterial effect. The bacteria inhibition was attributed to the plasmonic of 50GS-MNPs-Fe (photothermal effect) by irradiation with red light (630 nm, 65.5 mW·cm-2, 30 min). We highlight the superparamagnetism of the 50GS-MNPs-Fe over 60 K in a broader temperature range than the MNPs-Fe obtained by CO (160.09 K) and MW (211.1 K). Therefore, 50GS-MNPs-Fe could be excellent candidates as broad-spectrum PTAs in antibacterial PTT. Furthermore, they might be employed in magnetic hyperthermia, magnetic resonance imaging, oncological treatments, and so on.

Hydrothermal Synthesis of Bismuth Ferrite Hollow Spheres with Enhanced Visible-Light Photocatalytic Activity.

In recent years, semiconductor hollow spheres have gained much attention due to their unique combination of morphological, chemical, and physico-chemical properties. In this work, we report for the first time the synthesis of BiFeO3 hollow spheres by a facile hydrothermal treatment method. The mechanism of formation of pure phase BiFeO3 hollow spheres is investigated systematically by variation of synthetic parameters such as temperature and time, ratio and amount of precursors, pressure, and calcination procedures. The samples were characterized by X-ray powder diffraction, scanning electron microscopy, energy dispersive X-ray spectroscopy, and UV-vis diffuse reflectance spectroscopy. We observe that the purity and morphology of the synthesized materials are very sensitive to synthesis parameters. In general, the chemically and morphologically very robust hollow spheres have diameters in the range of 200 nm to 2 µm and a wall thickness of 50-200 nm. The synthesized BiFeO3 hollow spheres were applied as catalysts in the photodegradation of the model pollutant Rhodamine B under visible-light irradiation. Notably, the photocatalyst demonstrated exceptionally high removal efficiencies leading to complete degradation of the dye in less than 150 min at neutral pH. The superior efficiencies of the synthesized material are attributed to the unique features of hollow spheres. The active species in the photocatalytic process have been identified by trapping experiments.

Development of assisted reproductive technologies for the conservation of Atelopus sp. (spumarius complex).

Amphibians are in peril, given the ongoing sixth mass extinction of wildlife. Thus, Conservation Breeding Programs (CBPs) are attempting to breed some species under laboratory conditions. The incorporation of assisted reproduction technologies (ARTs), such as hormonal stimulation, sperm collection and cryopreservation, and in vitro fertilization is contributing to successful CBPs. The objective of this study was to apply ARTs in sexually mature individuals of an undescribed species of Atelopus (spumarius complex) (harlequin frog). Our procedure involves hormonal induction of gametogenesis in this species. We were able to induce gamete release through administration of human chorionic gonadotropin (hCG) in males, and in females this has been achieved through the sequential administration of hCG (priming doses), and combinations of hCG with gonadotropin releasing hormone analogue, GnRHa (ovulary dose). We standardized sperm cryopreservation by performing toxicity tests of cryoprotectants, fast/slow freezing and thawing, as well as supplementation of non-penetrating cryoprotectants (sugars). Next, we performed in vitro fertilization, evaluated the fertilization capacity of the cryopreserved sperm, and describe external features of fresh and cryopreserved sperm. We found that 10 IU/g hCG induced the release of the highest sperm concentrations between 3 and 5 h post-injection, while 2.5 IU/g hCG induced the release of eggs in most treated females. Under cryopreservation conditions, the highest recovery of forward progressive motility or FPM was 26.3 ± 3.5%, which was obtained in cryosuspensions prepared with the 5% DMF and 2.5% sucrose. Cryopreserved sperm showed narrower mitochondrial vesicles after thawing, while in frozen samples without cryodiluent showed 31% of spermatozoa lost their tails. In most cases, our attempts of in vitro fertilization were successful. However, only ∼10% of embryos were viable. Overall, our study demonstrates that the development of ARTs in individuals of Atelopus sp. (spumarius complex) bred in laboratory can be successful, which result in viable offspring through in vitro fertilization. Our study provides a baseline for assisted breeding protocols applicable to other harlequin frogs of the genus Atelopus.

Impact of the solvent composition on the structural and mechanical properties of customizable electrospun poly(vinylpyrrolidone) fiber mats.

The performance of fibrous membrane composites fabricated via electrospinning is strongly influenced by the solution's properties, process variables and ambient conditions, although a precise mechanism for controlling the properties of the resulting composite has remained elusive. In this work, we focus on the fabrication of electrospun poly(vinylpyrrolidone) (PVP) fibers, by varying both the polymer concentration and the mixture of ethanol (EtOH) and dimethylformamide (DMF) used as solvent. The impact of the solvent composition on the structural properties is assessed by a combined experimental and theoretical approach, employing scanning electron microscopy (SEM), differential scanning calorimetry (DSC), rheology, Fourier-transform infrared spectroscopy (FTIR) and stress-strain curves obtained from tensile tests to characterize the fibrous membranes produced, and density functional theory (DFT) calculations to explain the solvent's affect on PVP crystallization. We establish a morphological phase diagram, and propose a possible mechanism based on the measured fiber diameter distribution, the viscoelastic properties of the precursor solution, the correlation between the functional groups and the mechanical properties, the thermal transitions and the degree of crystallinity. We also employ DFT calculations to model the polymer coverage at equilibrium of a PVP polymer chain in the presence of EtOH/DMF solvent mixtures to corroborate the crucial role their O or -OH groups play in achieving high PVP coverages and promoting the stability of the resulting fiber. These findings will be valuable to researchers interested in predicting, modulating, and controlling both a fiber's morphology and its concomitant physico-chemical properties.

Fertility and Iron Bioaccumulation in Drosophila melanogaster Fed with Magnetite Nanoparticles Using a Validated Method.

Research on nanomaterial exposure-related health risks is still quite limited; this includes standardizing methods for measuring metals in living organisms. Thus, this study validated an atomic absorption spectrophotometry method to determine fertility and bioaccumulated iron content in Drosophila melanogaster flies after feeding them magnetite nanoparticles (Fe3O4NPs) dosed in a culture medium (100, 250, 500, and 1000 mg kg-1). Some NPs were also coated with chitosan to compare iron assimilation. Considering both accuracy and precision, results showed the method was optimal for concentrations greater than 20 mg L-1. Recovery values were considered optimum within the 95-105% range. Regarding fertility, offspring for each coated and non-coated NPs concentration decreased in relation to the control group. Flies exposed to 100 mg L-1 of coated NPs presented the lowest fertility level and highest bioaccumulation factor. Despite an association between iron bioaccumulation and NPs concentration, the 500 mg L-1 dose of coated and non-coated NPs showed similar iron concentrations to those of the control group. Thus, Drosophila flies' fertility decreased after NPs exposure, while iron bioaccumulation was related to NPs concentration and coating. We determined this method can overcome sample limitations and biological matrix-associated heterogeneity, thus allowing for bioaccumulated iron detection regardless of exposure to coated or non-coated magnetite NPs, meaning this protocol could be applicable with any type of iron NPs.

Bimodal Ultrasound and X-ray Bioimaging Properties of Particulate Calcium Fluoride Biomaterial.

Ultrasound (US) and X-ray imaging are diagnostic methods that are commonly used to image internal body structures. Several organic and inorganic imaging contrast agents are commercially available. However, their synthesis and purification remain challenging, in addition to posing safety issues. Here, we report on the promise of widespread, safe, and easy-to-produce particulate calcium fluoride (part-CaF2) as a bimodal US and X-ray contrast agent. Pure and highly crystalline part-CaF2 is obtained using a cheap commercial product. Scanning electron microscopy (SEM) depicts the morphology of these particles, while energy-dispersive X-ray spectroscopy (EDS) confirms their chemical composition. Diffuse reflectance ultraviolet-visible spectroscopy highlights their insulating behavior. The X-ray diffraction (XRD) pattern reveals that part-CaF2 crystallizes in the face-centered cubic cell lattice. Further analyses regarding peak broadening are performed using the Scherrer and Williamson-Hall (W-H) methods, which pinpoint the small crystallite size and the presence of lattice strain. X-ray photoelectron spectroscopy (XPS) solely exhibits specific peaks related to CaF2, confirming the absence of any contamination. Additionally, in vitro cytotoxicity and in vivo maximum tolerated dose (MTD) tests prove the biocompatibility of part-CaF2. Finally, the results of the US and X-ray imaging tests strongly signal that part-CaF2 could be exploited in bimodal bioimaging applications. These findings may shed a new light on calcium fluoride and the opportunities it offers in biomedical engineering.

Sugar-Mediated Green Synthesis of Silver Selenide Semiconductor Nanocrystals under Ultrasound Irradiation.

Silver selenide (Ag2Se) is a promising nanomaterial due to its outstanding optoelectronic properties and countless bio-applications. To the best of our knowledge, we report, for the first time, a simple and easy method for the ultrasound-assisted synthesis of Ag2Se nanoparticles (NPs) by mixing aqueous solutions of silver nitrate (AgNO3) and selenous acid (H2SeO3) that act as Ag and Se sources, respectively, in the presence of dissolved fructose and starch that act as reducing and stabilizing agents, respectively. The concentrations of mono- and polysaccharides were screened to determine their effect on the size, shape and colloidal stability of the as-synthesized Ag2Se NPs which, in turn, impact the optical properties of these NPs. The morphology of the as-synthesized Ag2Se NPs was characterized by transmission electron microscopy (TEM) and both α- and ß-phases of Ag2Se were determined by X-ray diffraction (XRD). The optical properties of Ag2Se were studied using UV-Vis spectroscopy and its elemental composition was determined non-destructively using scanning electron microscopy-energy-dispersive spectroscopy (SEM-EDS). The biological activity of the Ag2Se NPs was assessed using cytotoxic and bactericidal approaches. Our findings pave the way to the cost-effective, fast and scalable production of valuable Ag2Se NPs that may be utilized in numerous fields.

Green synthesis of silver nanoparticles for application in cosmetics.

In this work, we analyzed the advantages of using silver nanoparticles (AgNPs) synthesized with natural extracts in ultraviolet-visible spectroscopy (UV-Vis) protective cream. The photodegradation properties of the new UV-Vis protective milk show an increase in its absorption band compared to AgNP-free cream. Previous to the study of the AgNPs mixed within the body milk, we studied the optical UV-Vis properties of extracts at different collection times, as they can influence the spectral range of UV-Vis absorption of the hybrid compound (AgNPs + natural extract). Shape and size of the AgNPs differs from the type of reducing agent as well as the concentration of silver nitrate used. We also compared the cytotoxicity in cell lines and the antibacterial effect of the AgNPs without and with organic coating. All these studies showed that we obtained hybrid sun-protective body milk with a high degree of solar protection and with low cytotoxicity at a cellular level, thus improving its protective properties. The synthetized hybrid compound could be a possible cost-affordable alternative for the market.

A Circular Bioeconomy Approach to Using Post-Bioadsorbent Materials Intended for the Removal of Domestic Wastewater Contaminants as Potential Reinforcements.

Agro-industrial residue valorization under the umbrella of the circular bioeconomy (CBE) has prompted the search for further forward-thinking alternatives that encourage the mitigation of the industry's environmental footprint. From this perspective, second-life valorization (viz., thermoplastic composites) has been explored for agro-industrial waste (viz., oil palm empty fruit bunch fibers, OPEFBFs) that has already been used previously in other circular applications (viz., the removal of domestic wastewater contaminants). Particularly, this ongoing study evaluated the performance of raw residues (R-OPEFBFs) within three different size ranges (250-425, 425-600, 600-800 µm) both before and after their utilization in biofiltration processes (as post-adsorbents, P-OPEFBFs) to reinforce a polymer matrix of acrylic resin. The research examined the changes in R-OPEFBF composition and morphology caused by microorganisms in the biofilters and their impact on the mechanical properties of the composites. Smaller R-OPEFBFs (250-425 µm) demonstrated superior mechanical performance. Additionally, the composites with P-OPEFBFs displayed significant enhancements in their mechanical properties (3.9-40.3%) compared to those with R-OPEFBFs. The combination of the three fiber sizes improved the mechanical behavior of the composites, indicating the potential for both R-OPEFBFs and P-OPEFBFs as reinforcement materials in composite applications.

Photoelectrocatalytic degradation of high-density polyethylene microplastics on TiO2-modified boron-doped diamond photoanode.

Microplastic (MP) accumulation in the environment is accelerating rapidly, which has led to their effects on both the ecosystem and human life garnering much attention. This study is the first to examine the degradation of high-density polyethylene (HDPE) MPs via photoelectrocatalysis (PEC) using a TiO2-modified boron-doped diamond (BDD/TiO2) photoanode. This study was divided into three stages: (i) preparation of the photoanode through electrophoretic deposition of synthetic TiO2 nanoparticles on a BDD electrode; (ii) characterization of the modified photoanode using electrochemical, structural, and optical techniques; and (iii) degradation of HDPE MPs by electrochemical oxidation and photoelectrocatalysis on bare and modified BDD electrodes under dark and UV light conditions. The results indicate that the PEC technique degraded 89.91 ± 0.08% of HDPE MPs in a 10-h reaction and was more efficient at a lower current density (6.89 mA cm-1) with the BDD/TiO2 photoanode compared to electrochemical oxidation on bare BDD.

Synergistic Antibacterial Properties of Silver Nanoparticles and Its Reducing Agent from Cinnamon Bark Extract.

Synthesis of silver nanoparticles with antibacterial properties using a one-pot green approach that harnesses the natural reducing and capping properties of cinnamon (Cinnamomum verum) bark extract is presented in this work. Silver nitrate was the sole chemical reagent employed in this process, acting as the precursor salt. Gas Chromatography-Mass Spectroscopy (GC-MS), High-Performance Liquid Chromatography (HPLC) analysis, and some phytochemical tests demonstrated that cinnamaldehyde is the main component in the cinnamon bark extract. The resulting bio-reduced silver nanoparticles underwent comprehensive characterization by Ultraviolet-Vis (UV-Vis) and Fourier Transform InfraRed spectrophotometry (FTIR), Dynamic Light Scattering (DLS), Transmission Electron Microscopy, and Scanning Electron Microscopy suggesting that cinnamaldehyde was chemically oxidated to produce silver nanoparticles. These cinnamon-extract-based silver nanoparticles (AgNPs-cinnamon) displayed diverse morphologies ranging from spherical to prismatic shapes, with sizes spanning between 2.94 and 65.1 nm. Subsequently, the antibacterial efficacy of these nanoparticles was investigated against Klebsiella, E. Coli, Pseudomonas, Staphylococcus aureus, and Acinetobacter strains. The results suggest the promising potential of silver nanoparticles obtained (AgNPs-cinnamon) as antimicrobial agents, offering a new avenue in the fight against bacterial infections.

Kinetic study of the catalytic cracking of waste motor oil using biomass-derived heterogeneous catalysts.

Herein, biochar from biomass residues is demonstrated as active materials for the catalytic cracking of waste motor oil into diesel-like fuels. Above all, alkali-treated rice husk biochar showed great activity with a 250% increase in the kinetic constant compared to the thermal cracking. It also showed better activity than synthetic materials, as previously reported. Moreover, much lower activation energy (185.77to293.48kJmol) for the cracking process was also obtained. According to materials characterization, the catalytic activity was more related to the nature of the biochar's surface than its specific surface area. Finally, liquid products complied with all the physical properties defined by international standards for diesel-like fuels, with the presence of hydrocarbons chains between C10-C27 similar to the ones obtained in commercial diesel.

Direct development or endotrophic tadpole? Morphological aspects of the early ontogeny of the plump toad Osornophryne occidentalis (Anura: Bufonidae).

Andean Toads of the genus Osornophryne are suspected to have direct development on the basis of clutch and egg features. In this work, we describe the morphology of Osornophryne occidentalis embryos from a nest collected in the field. Several traits are similar to those reported in brachycephaloid Eleutherodactylus coqui and other direct-developing lineages. These include the pattern of formation of the body wall and the absence of oral and buccopharyngeal structures. Other features indicate the retention of ancestral larval characters. The development of forelimbs occurs in part within the operculum as in species with biphasic ontogeny; this has been reported in other direct-developing species, and is similar to what is described in African viviparous bufonids. This salient feature, along with the long, low-finned tail and the long and folded intestine early differentiated, gives these embryos a rather tadpole-like appearance. Our data confirm that development in O. occidentalis occurs within terrestrial eggs until advanced stages, and this would satisfy current definitions of direct development. At the same time, morphological differences regarding other species with comparable breeding reinforce interpretations about the wide anatomical and ontogenetic variations associated with endotrophic nutrition.

New Bacteriophages Members of the Ackermannviridae Family Specific for Klebsiella pneumoniae ST258.

Background: Carbapenem-resistant Klebsiella pneumoniae, particularly isolates classified as sequence-type 258 (ST258), are multidrug-resistant strains that are strongly associated with poor-prognosis nosocomial infections, as current therapeutic options are limited and ineffective. In recent years, phage therapy has emerged as a promising treatment option for these scenarios. Methodology and Results: We report the isolation and characterization of three new phages against Klebsiella pneumoniae ST258 strains recovered from Machángara river wastewater. These new members of the Ackermannviridae family showed stability over a wide temperature and pH range and burst sizes ranging from 6 to 44 plaque-forming units per bacteria. Their genomes were about 157 kilobases, with an average guanine-cytosine content of 46.4% and showed presence of several transfer RNAs, which also allowed us to predict in silico a lytic replicative cycle due to the presence of endolysins and lysozymes. Conclusion: Three lytic phages of Ackermannviridae family were recovered against Klebsiella pneumoniae ST258 strains from sewage; however, further characterization is needed for future consideration as therapeutic alternatives.

Degradation of PET Bottles by an Engineered Ideonella sakaiensis PETase.

Extensive plastic production has become a serious environmental and health problem due to the lack of efficient treatment of plastic waste. Polyethylene terephthalate (PET) is one of the most used polymers and is accumulating in landfills or elsewhere in nature at alarming rates. In recent years, enzymatic degradation of PET by Ideonella sakaiensis PETase (IsPETase), a cutinase-like enzyme, has emerged as a promising strategy to completely depolymerize this polymer into its building blocks. Here, inspired by the architecture of cutinases and lipases homologous to IsPETase and using 3D structure information of the enzyme, we rationally designed three mutations in IsPETase active site for enhancing its PET-degrading activity. In particular, the S238Y mutant, located nearby the catalytic triad, showed a degradation activity increased by 3.3-fold in comparison to the wild-type enzyme. Importantly, this structural modification favoured the function of the enzyme in breaking down highly crystallized (~31%) PET, which is found in commercial soft drink bottles. In addition, microscopical analysis of enzyme-treated PET samples showed that IsPETase acts better when the smooth surface of highly crystalline PET is altered by mechanical stress. These results represent important progress in the accomplishment of a sustainable and complete degradation of PET pollution.

Simultaneous quantification of lead, cadmium and zinc in superficial marine sediments using a carbon-fiber microelectrode modified with bismuth film.

Marine sediments are a useful environmental assessment matrix as they naturally trap toxic substances of anthropogenic origin and thus have higher concentrations of these than the surrounding water. Therefore, developing methods for the sensitive, accurate, and inexpensive quantification of these substances is important, as the traditional techniques have various disadvantages. The current study evaluated the effectiveness of an in situ bismuth-modified carbon-fiber microelectrode (voltamperometric sensor) to simultaneously detect Pb, Cd, and Zn in marine sediments from Puerto Jeli in El Oro Province, Ecuador. This site is representative of the contamination levels present along the coast in this province. Differential pulse anodic stripping voltammetry was applied, and the resulting linear regression for the metal quantification ranged from 12 to 50 µg mL-1, with quantification limits for Pb(II), Cd(II), and Zn(II) of 18.69, 12.55, and 19.29 µg mL-1, respectively. Thus, the quantification with the sensor was successful. According to the preliminary results, Cd and Pb values exceeded the permissible limits established by Ecuador (Texto Unificado de la Legislación Secundaria del Ministerio del Ambiente) and the US Environmental Protection Agency, respectively.

Lignocellulosic-Based Nanoparticles with Photoluminescent Properties for Bioimaging.

Natural and renewable resources from plants or animals are an important source of biomaterials due to their biocompatibility and high availability. Lignin is a biopolymer present in the biomass of plants, where it is intertwined and cross-linked with other polymers and macromolecules in the cell walls, generating a lignocellulosic material with potential applications. We have prepared lignocellulosic-based nanoparticles with an average size of 156 nm that exhibit a high photoluminescence signal when excited at 500 nm with emission in the near-infrared (NIR) region at 800 nm. The advantage of these lignocellulosic-based nanoparticles is their natural luminescent properties and their origin from rose biomass waste, which eliminates the need for encapsulation or functionalization of imaging agents. Moreover, the in vitro cell growth inhibition (IC50) of lignocellulosic-based nanoparticles is about 3 mg/mL, and no in vivo toxicity was registered up to 57 mg/kg, which suggests that they are suitable for bioimaging applications. In addition, these nanoparticles can circulate in the blood and are excreted in urine. The combined high luminescence signal in NIR, small size, low in vitro toxicity, low in vivo toxicity, and blood circulation support the potential of lignin-based nanoparticles as a novel bioimaging agent.