ABSTRACT
Pectic acid/sodium pectate is one of the most widespread hydrocolloid used in the food industry. It is able to form strong ionotropic gels by the addition of ions, in particular, calcium ions. The initial steps of binding Ca2+ ions to a sample of sodium pectate with a composition close to 90% of ideal Na+-poly(galacturonate) were investigated by means of circular dichroism (CD), microcalorimetry, dilatometry, viscosity, and membrane osmometry, as a function of increasing Rj, Rj being the ratio of the molar concentrations of Ca2+ and pectate repeating units. Data were collected in aqueous NaClO4 at 25 °C. The key instrument of interpretation has been the counterion condensation theory (CCT) of linear polyelectrolytes, modified to include the presence of both specific affinity of the divalent counterion for the polysaccharide ("territorial binding"), and, very importantly, strong chemical bonding (not a covalent bonding, though) of Ca2+ on conformationally well-defined sites on the polymer, with local charge annihilation. Intrinsic viscosity and number-average molar mass data as a function of Rj showed that calcium bonding brings about chain association right from the beginning of addition to pectate. The analysis of the microcalorimetric curve using the modified CCT revealed two types of bonding. In the order of development as a function of Rj, the first mode (type 1) could be reconciled with the "tilted egg-box" type, recently proposed for Ca2+ binding to alginate and the second mode (type 2) with the "shifted egg-box" proposed for calcium pectate on the basis of conformational analysis investigation. Likewise, the two types of bonding turned out to be superimposable with similar bonding categories proposed for alginate and low-methoxyl pectin (LMP), on the one side, and for the association of semiflexible polyelectrolytes, on the other. The analysis allowed us to obtain standard Gibbs free energy, enthalpy, entropy, and volume molar values both for the affinity and the chemical bonding processes. Interestingly, the analysis of the dependence of the gelation temperatures, Tg, of LMP upon increasing additions of calcium ions provided the values of Tg and standard Gibbs free-energy of calcium-to-pectate association coinciding with those obtained from calorimetry for the type-2 bonding process. This finding corroborated previously reported evidence on the enthalpic nature of the elasticity of Ca2+-pectate gels. Finally, comparative analysis of different techniques, but of CD in particular, enabled proposing a "loose-21-helix" as the starting conformation of sodium pectate in aqueous solution.
Subject(s)
Calcium , Pectins , Calcium/chemistry , Gels/chemistry , Ions , Pectins/chemistryABSTRACT
Strain hardening has recently emerged as a near-universal response of biological tissues to mechanical stimulation as well as a powerful regulator of cell fate. Understanding the mechanistic basis for this nonlinear elasticity is crucial for developing bioinspired materials that mimic extracellular matrix mechanics. Here, we show that covalent networks built from highly acetylated chitosans exhibit strain hardening at physiological pH and osmolarity. While varying the chitosan physical-chemical composition and network connectivity, we provide evidence that temporary nodes arising from the entangling of chains between stable cross-links are at the root of nonlinear elasticity. The contour length (Lc) of the said chains revealed that the larger the chain length between the cross-links, the greater is the entanglement over disentanglement upon network stretching. To this end, we calculated that the minimum number of Khun's segments in Lc that contributes to the onset of strain hardening is 15. Furthermore, we identified a relationship between critical strain marking nonlinear elasticity and the network connectivity, being similar to that found for the cytoskeletal collagen matrix, indicating the potential use of semiflexible (neutral pH-soluble) chitosans in assembling extracellular matrix mimics.
Subject(s)
Chitosan , Collagen , Elasticity , Extracellular Matrix , Gels , Stress, MechanicalABSTRACT
The present manuscript deals with the elucidation of the mechanism of genipin binding by primary amines at neutral pH. UV-VIS and CD measurements both in the presence of oxygen and in oxygen-depleted conditions, combined with computational analyses, led to propose a novel mechanism for the formation of genipin derivatives. The indications collected with chiral and achiral primary amines allowed interpreting the genipin binding to a lactose-modified chitosan (CTL or Chitlac), which is soluble at all pH values. Two types of reaction and their kinetics were found in the presence of oxygen: (i) an interchain reticulation, which involves two genipin molecules and two polysaccharide chains, and (ii) a binding of one genipin molecule to the polymer chain without chain-chain reticulation. The latter evolves in additional interchain cross-links, leading to the formation of the well-known blue iridoid-derivatives.
Subject(s)
Chitosan/chemistry , Iridoids/chemistry , Lactose/chemistry , Amines/chemistry , Biocompatible Materials/chemistry , Chitosan/analogs & derivatives , Chitosan/chemical synthesis , Circular Dichroism , Computational Chemistry , Cross-Linking Reagents/chemistry , Hydrogen-Ion Concentration , Kinetics , Ligands , Magnetic Resonance Spectroscopy , Oxygen/chemistry , Polysaccharides/chemistry , Spectrophotometry, UltravioletABSTRACT
Chitosan derivatives, and more specifically, glycosylated derivatives, are nowadays attracting much attention within the scientific community due to the fact that this set of engineered polysaccharides finds application in different sectors, spanning from food to the biomedical field. Overcoming chitosan (physical) limitations or grafting biological relevant molecules, to mention a few, represent two cardinal strategies to modify parent biopolymer; thereby, synthetizing high added value polysaccharides. The present review is focused on the introduction of oligosaccharide side chains on the backbone of chitosan. The synthetic aspects and the effect on physical-chemical properties of such modifications are discussed. Finally, examples of potential applications in biomaterials design and drug delivery of these novel modified chitosans are disclosed.
Subject(s)
Biocompatible Materials/chemistry , Chitosan/chemistry , Drug Delivery Systems/methods , Oligosaccharides/chemistry , Tissue Engineering/methods , Animals , Chitosan/analogs & derivatives , Chitosan/chemical synthesis , Glycosylation , Humans , Molecular Dynamics Simulation , Nanoparticles/chemistryABSTRACT
We report on a controlled process allowing for the gelation of a diol-rich chitosan-derivative named CTL (lactose-modified chitosan) in the presence of boric acid as the cross-linker. A two-step approach is described, namely (i) the mixing of CTL and boric acid at pH = 5, a condition where the inorganic component is mildly reactive; (ii) the addition of sodium bicarbonate (NaHCO3) as a trigger, allowing for the gradual and slow pH increase. The goal was to convert gradually the almost inert neutral boric acid into the much more reactive borate anion, the latter promoting the formation of borate esters with CTL diols. Gelling kinetics as well as mechanical behavior at small and large deformations was investigated by rheometry. CTL-boric acid gels behaved essentially as transient networks, hence continuously assembling and dissociating in a highly dynamic fashion. The present gelling mechanism preserves the strain-hardening behavior in the nonlinear region of stress-strain response, corroborating the already suggested potential applications of such gels as mimics of biological soft tissues.
Subject(s)
Biocompatible Materials/chemistry , Boric Acids/chemistry , Chitosan/chemistry , Gels/chemistry , Lactose/chemistry , Hydrogen-Ion ConcentrationABSTRACT
Implantable membranes based on alginate and hyaluronic acid (HA) were manufactured to obtain a rapidly resorbing pliable mesh for the in situ administration of HA to intestinal tissue. Morphological analyses of this interpenetrated matrix pointed out a homogeneous polymeric texture while degradation studies demonstrated that the material is able to dissolve in physiological solutions within few days. Biological studies in vitro showed that the membrane is biocompatible towards human dermal fibroblasts and that liquid extracts from the HA-containing membrane can stimulate wound healing. A preliminary in vivo biocompatibility study on rats showed that the membranes in direct contact with the intestine did not elicit any acute adverse reaction or immune response, while only a mild inflammatory reaction was noticed at the mesenteric or serosal region. Overall, these results appear to support the application of these polysaccharide-based materials for intestinal wound healing.
Subject(s)
Biocompatible Materials/chemistry , Hyaluronic Acid/chemistry , Surgical Wound/therapy , Wound Healing , Alginates/chemistry , Animals , Cell Survival , Fibroblasts/metabolism , Hexuronic Acids/chemistry , Humans , Inflammation , Materials Testing , Mice , NIH 3T3 Cells , Polymers , Polysaccharides/chemistry , Rats , Skin/metabolismABSTRACT
Galectins (Gal) are a family of glycan-binding proteins characterized by their affinity for ß-galactosides. Galectin-1 (Gal-1), a dimeric lectin with two galactoside-binding sites, regulates cancer progression and immune responses. Coordination chemistry has been engaged to develop versatile multivalent neoglycoconjugates for binding Gal-1. In this study we report a fast and original method to synthesize hybrid gold nanoparticles in which a hydrochloride lactose-modified chitosan, named CTL, is mixed with dicarboxylic acid-terminated polyethylene glycol (PEG), leading to shell-like hybrid polymer-sugar-metal nanoparticles (CTL-PEG-AuNPs). The aim of this paper is to preliminarily study the interaction of the CTL-PEG-AuNPs with a target protein, namely, Gal-1, under specific conditions. The molecular interaction has been measured by Transmission Electron Microscopy (TEM), UV-vis, and Raman Spectroscopy on a large range of Gal-1 concentrations (from 0 to 10-12 M). We observed that the interaction was strongly dependent on the Gal-1 concentration at the surface of the gold nanoparticles.
Subject(s)
Chitosan/chemistry , Galectin 1/chemistry , Gold/chemistry , Lactose/chemistry , Polyethylene Glycols/chemistry , Humans , Metal Nanoparticles/chemistry , Microscopy, Electron, Transmission , Spectrophotometry, Ultraviolet , Spectrum Analysis, RamanABSTRACT
Chitosan and its highly hydrophilic 1-deoxy-lactit-1-yl derivative (Chitlac) are polysaccharides with increasing biomedical applications. Aimed to unravel their conformational properties we have performed a series of molecular dynamics simulations of Chitosan/Chitlac decamers, exploring different degrees of substitution (DS) of lactitol side chains. At low DS, two conformational regions with different populations are visited, while for DS ≥ 20% the oligomers remain mostly linear and only one main region of the glycosidic angles is sampled. These conformers are (locally) characterized by extended helical "propensities". Helical conformations 32 and 21, by far the most abundant, only develop in the main region. The accessible conformational space is clearly enlarged at high ionic strength, evidencing also a new region accessible to the glycosidic angles, with short and frequent interchange between regions. Simulations of neutral decamers share these features, pointing to a central role of electrostatic repulsion between charged moieties. These interactions seem to determine the conformational behavior of the chitosan backbone, with no evident influence of H-bond interactions. Finally, it is also shown that increasing temperature only slightly enlarges the available conformational space, but certainly without signs of a temperature-induced conformational transition.
Subject(s)
Chitosan/chemistry , Lactose/chemistry , Molecular Conformation , Glycosides/chemistry , Hydrogen Bonding , Molecular Dynamics Simulation , Osmolar Concentration , Sodium Chloride/chemistry , Sugar Alcohols/chemistry , Temperature , Time FactorsABSTRACT
Complex coacervation of two oppositely charged polysaccharides, namely a lactose-modified chitosan (CTL) and hyaluronan (HA), was investigated in this study. Coacervates of the two polysaccharides were prepared by drop-by-drop injection of HA into CTL. Transmittance and dynamic light scattering (DLS) measurements in combination with TEM analyses demonstrated the formation of spheroidal colloids in the nano-/microsize range showing good homogeneity. Strikingly, the presence of 150 mM supporting NaCl did not hamper the colloid formation. Stability studies on selected formulations demonstrated that HA/CTL coacervates were stable up to 3 weeks at 37 °C and behaved as pH-responsive colloids since transition from entangled to disentangled chains was attained for a proper pH range. The possibility of freeze-drying the coacervates for storage purposes and the ability of encapsulating selected payloads were investigated as well, for two values of the fraction of the lactitol side-chain substitution (FL). Finally, biological tests using human neutrophils were undertaken at acidic pH value (pH = 6.0): under such experimental conditions, akin to those frequently occurring in the inflammatory microenvironment, coacervates scavenged reactive oxygen species (ROS) generated by these cells in basal conditions. Given the well documented bioactivity of CTL with respect to chitosan toward cartilage regeneration, these findings point to a possible application of HA/CTL-based colloids as scavenging and bioactive carriers for the delivery of therapeutic molecules at confined inflamed sites such as knee joints.
Subject(s)
Cell Adhesion , Chitosan/chemistry , Drug Carriers/chemistry , Free Radical Scavengers/chemistry , Hyaluronic Acid/chemistry , Lactose/chemistry , Neutrophils/physiology , Colloids/chemistry , Drug Compounding , Humans , Hydrogen-Ion Concentration , Reactive Oxygen SpeciesABSTRACT
The present paper explores the effect of boric acid on Chitlac, a lactose-modified chitosan which had previously shown interesting biological and physical-chemical features. The herewith-reported experimental evidences demonstrated that boric acid binds to Chitlac, producing conformational and association effects on the chitosan derivative. The thermodynamics of boric acid binding to Chitlac was explored by means of 11B NMR, circular dichroism (CD), and UV-vis spectroscopy, while macromolecular effects were investigated by means of viscometry and dynamic light scattering (DLS). The experimental results revealed a chain-chain association when limited amounts of boric acid were added to Chitlac. However, upon exceeding a critical boric acid limit dependent on the polysaccharide concentration, the soluble aggregates disentangle. The rheological behavior of Chitlac upon treatment with boric acid was explored showing a dilatant behavior in conditions of steady flow. An uncommonly high dependence in the scaling law between the zero-shear viscosity and the concentration of Chitlac was found, i.e., η0 â CCTL5.8, pointing to interesting potential implications of the present system in biomaterials development.
Subject(s)
Boric Acids/chemistry , Chitosan/chemistry , Lactose/chemistry , Biocompatible Materials/chemistry , Macromolecular Substances/chemistry , Magnetic Resonance Spectroscopy , Polysaccharides/chemistry , ViscosityABSTRACT
This study aimed at investigating the effect of a methacrylate-modified chitosan on the durability of adhesive interfaces to improve the clinical performance of dental restorations. Chitosan was modified with methacrylic acid (Chit-MA70) on 16% of the amino groups. Viscosity, rheology, and (1)H NMR spectroscopy were performed to characterize the modified polysaccharide. Chit-MA70 was blended into a primer of an "etch-and-rinse" experimental adhesive system and tested on human teeth. The presence of methacrylate moieties and of residual positive charges on the polysaccharide chain allowed Chit-MA70 to covalently bind to the restorative material and electrostatically interact with demineralized dentin. The Chit-MA70 containing an adhesive system showed values of the immediate bond strength (26.0 ± 8.7 MPa) comparable to the control adhesive system (25.5 ± 8.7 MPa). However, it was shown that upon performing thermo-mechanical cycling treatment of the dental restoration on human teeth, the adhesive with the methacrylate-modified chitosan, in variance with the control adhesive, did not show any decrease in the bond strength (28.4 ± 8.8 MPa). The modified chitosan is proposed as a component of the "etch-and-rinse" adhesive system to efficiently improve the durability of dental restorations.
Subject(s)
Chitosan/chemistry , Dental Bonding , Dentin/chemistry , Methacrylates/chemistry , Composite Resins/chemistry , Humans , Magnetic Resonance Spectroscopy , Microscopy, Confocal , Microscopy, Electron, Scanning , Molar , Polymerization , Specimen Handling , Spectrophotometry, Infrared , Surface Properties , Tensile StrengthABSTRACT
Polysaccharide networks, in the form of hydrogels and dried membranes based on chitosan and on the cross-linker tripolyphosphate (TPP), were developed using a novel approach. TPP was incorporated into chitosan by slow diffusion to favor a controlled gelation. By varying chitosan, TPP, and NaCl concentration, transition from inhomogeneous to homogeneous systems was achieved. Rheology and uniaxial compression tests enabled to identify the best performing hydrogel composition with respect to mechanical properties. FTIR, (31)P NMR, and spectrophotometric methods were used to investigate the interaction chitosan-TPP, the kinetics of phosphates diffusion during the dialysis and the amount of TPP in the hydrogel. A freeze-drying procedure enabled the preparation of soft pliable membranes. The lactate dehydrogenase assay demonstrated the biocompatibility of the membranes toward fibroblasts. Overall, we devised a novel approach to prepare homogeneous macroscopic chitosan/TPP-based biomaterials with tunable mechanical properties and good biocompatibility that show good potential as novel polysaccharide derivatives.
Subject(s)
Biocompatible Materials , Chitosan , Fibroblasts/enzymology , Hydro-Lyases/metabolism , Hydrogels , Polyphosphates , Polysaccharides , Animals , Biocompatible Materials/chemical synthesis , Biocompatible Materials/chemistry , Biocompatible Materials/pharmacology , Chitosan/chemistry , Chitosan/pharmacology , Fibroblasts/cytology , Hydrogels/chemical synthesis , Hydrogels/chemistry , Hydrogels/pharmacology , Materials Testing , Mice , NIH 3T3 Cells , Polyphosphates/chemistry , Polyphosphates/pharmacology , Polysaccharides/chemistry , Polysaccharides/pharmacologyABSTRACT
Three-dimensional (3D) bioprinting technology enables the controlled deposition of cells and biomaterials (i.e., bioink) to easily create complex 3D biological microenvironments. Silk fibroin (SF) has recently emerged as a compelling bioink component due to its advantageous mechanical and biological properties. This study reports on the development and optimization of a novel bioink for extrusion-based 3D bioprinting and compares different bioink formulations based on mixtures of alginate methacrylate (ALMA), gelatin and SF. The rheological parameters of the bioink were investigated to predict printability and stability, and the optimal concentration of SF was selected. The bioink containing a low amount of SF (0.002% w/V) was found to be the best formulation. Light-assisted gelation of ALMA was exploited to obtain the final hydrogel matrix. Rheological analyses showed that SF-enriched hydrogels exhibited greater elasticity than SF-free hydrogels and were more tolerant to temperature fluctuations. Finally, MG-63 cells were successfully bioprinted and their viability and proliferation over time were analyzed. The SF-enriched bioink represents an excellent biomaterial in terms of printability and allows high cell proliferation over a period of up to 3 weeks. These data confirm the possibility of using the selected formulation for the successful bioprinting of cells into extracellular matrix-like microenvironments.
ABSTRACT
Agarose is a natural polysaccharide known for its ability to form thermoreversible hydrogels. While the effects of curing temperature and polysaccharide concentration on mechanical properties have been discussed in the literature, the role of ionic strength has been less studied. In the present manuscript, we investigate the effects of supporting salt concentration and the role of cation (i.e. Na+ or Li+, neighbors in the Hofmeister series), on the setting and performance of agarose hydrogels. Compressive and rheological measurements show that the supporting salts reduce the immediate elastic response of agarose hydrogels, with Li+ showing a stronger effect than Na+ at high ionic strength, while they significantly increase the extent of linear stress-strain response (i.e., linear elasticity). The presence of increasing amounts of added supporting salt also leads to a reduction in hysteresis during mechanical deformation due to loading and unloading cycles, which is more pronounced with Li+ than with Na+. The combination of rheological measurements and NMR relaxometry shows a mesh size in agarose hydrogels in the order of 6-17 nm, with a thickness of the water layer bound to the biopolymer of about 3 nm. Of note, the different structuring of the water within the hydrogel network due to the different alkali seems to play a role for the final performance of the hydrogels.
ABSTRACT
Oligosaccharides from uronic acid-containing polysaccharides can be produced either by chemical or enzymatic degradation. The benefit of using enzymes, called lyases, is their high specificity for various glycosidic linkages. Lyases cleave the polysaccharide chain by an ß-elimination reaction, yielding oligosaccharides with an unsaturated sugar (4-deoxy-l-erythro-hex-4-enepyranosyluronate) at the non-reducing end. In this work we have systematically studied acid degradation of unsaturated uronic acid oligosaccharides. Based on these findings, a method for preparing saturated oligosaccharides by enzymatic degradation of uronic acid-containing polysaccharides was developed. This results in oligosaccharides with a pre-defined distribution and proportion of sugar residues compared to the products of chemical degradation, while maintaining the chemical structure of the non-reducing end. The described method was demonstrated for generating saturated oligosaccharides of alginate, heparin and polygalacturonic acid. In the case of alginate, the ratio of hydrolysis rate of Δ-G and Δ-M linkages to that of G-G and M-M linkages, respectively, was found to be approximately 65 and 43, at pH* 3.4, 90 °C. Finally, this method has been demonstrated to be superior in the production of α-l-guluronate oligosaccharides with a lower content of ß-d-mannuronate residues compared to what can be achieved using chemical depolymerization alone.
Subject(s)
Alginates , Oligosaccharides , Uronic Acids , Alginates/chemistry , Oligosaccharides/chemistry , Uronic Acids/chemistry , Hydrolysis , Polysaccharide-Lyases/chemistry , Polysaccharide-Lyases/metabolism , Polysaccharides/chemistry , Pectins/chemistry , Heparin/chemistryABSTRACT
In this study nano-composite scaffolds to be used as bone grafts have been endowed with antibacterial properties owing to the presence of silver nanoparticles. The alginate/hydroxyapatite composite scaffolds were prepared by internal gelation followed by a freeze-drying procedure to obtain a porous structure. The nanoparticles were prepared in presence of a lactose modified-chitosan and this colloidal solution was adsorbed on the scaffolds by exploiting electrostatic interactions. The adsorption and release of the silver from the composite scaffold was measured by ICP-AES and spectrofluorimetry measurements. Micro-computed tomography analysis of the scaffolds showed a homogeneous porous structure with average pore sizes of 341.5 µm and porosity of 80 %. In vitro biological tests (MTS and killing kinetics assays) demonstrated that silver does not affect the ability of the scaffolds to promote osteoblasts proliferation and that at the same time it exerts a strong bactericidal effect against both Gram+ and Gram- bacterial strains. Overall, the combined results indicate that these biocompatible antimicrobial scaffolds possess ideal characteristics for tissue engineering applications.
Subject(s)
Bone and Bones/drug effects , Metal Nanoparticles/chemistry , Nanocomposites , Silver/chemistry , Tissue Scaffolds/chemistry , Alginates/chemistry , Alginates/pharmacology , Anti-Bacterial Agents/chemical synthesis , Anti-Bacterial Agents/chemistry , Anti-Bacterial Agents/pharmacology , Bone and Bones/cytology , Bone and Bones/physiology , Cell Proliferation/drug effects , Durapatite/chemistry , Durapatite/pharmacology , Glucuronic Acid/chemistry , Glucuronic Acid/pharmacology , Hexuronic Acids/chemistry , Hexuronic Acids/pharmacology , Humans , Materials Testing/methods , Microbial Sensitivity Tests , Nanocomposites/chemistry , Silver/pharmacology , Tissue Culture Techniques/instrumentation , Tissue Engineering/instrumentation , Tissue Engineering/methods , Tumor Cells, CulturedABSTRACT
Biostable fiber-reinforced composite (FRC) implants prepared from bisphenol-A-dimethacrylate and triethyleneglycoldimethacrylate resin reinforced with E-glass fibers have been successfully used in cranial reconstructions in 15 patients. Recently, porous FRC structures were suggested as potential implant materials. Compared with smooth surface, porous surface allows implant incorporation via bone ingrowth, but is also a subject to bacterial attachment. Non-cytotoxic silver-polysaccharide nanocomposite coatings may provide a way to decrease the risk of bacterial contamination of porous FRC structures. This study is focused on the in vitro characterization of the effect porosity on the antimicrobial efficiency of the coatings against Staphylococcus aureus and Pseudomonas aeruginosa by a series of microbiological tests (initial adhesion, antimicrobial efficacy, and biofilm formation). Characterization included confocal laser scanning microscopy and scanning electron microscopy. The effect of porosity on the initial attachment of S. aureus was pronounced, but in the case of P. aeruginosa the effect was negligible. There were no significant effects of the coatings on the initial bacterial attachment. In the antimicrobial efficacy test, the coatings were potent against both strains regardless of the sample morphology. In the biofilm tests, there were no clear effects either of morphology or of the coating. Further coating development is foreseen to achieve a longer-term antimicrobial effect to inhibiting bacterial implant colonization.
Subject(s)
Anti-Infective Agents/chemistry , Chitosan/chemistry , Polysaccharides/chemistry , Silver/chemistry , Bacterial Adhesion/drug effects , Benzhydryl Compounds/chemistry , Biofilms , Bone and Bones , Chitosan/analogs & derivatives , Composite Resins , Lactose/analogs & derivatives , Lactose/chemistry , Methacrylates/chemistry , Microbial Sensitivity Tests , Polyethylene Glycols/chemistry , Polymethacrylic Acids/chemistry , Porosity , Prostheses and Implants , Pseudomonas aeruginosa , Staphylococcus aureusABSTRACT
Alginates are a broad family of linear (unbranched) polysaccharides derived from brown seaweeds and some bacteria. Despite having only two monomers, i.e. ß-d-mannuronate (M) and its C5 epimer α-l-guluronate (G), their blockwise arrangement in oligomannuronate (..MMM..), oligoguluronate (..GGG..), and polyalternating (..MGMG..) blocks endows it with a rather complex interaction pattern with specific counterions and salts. Classic polyelectrolyte theories well apply to alginate as polyanion in the interaction with monovalent and non-gelling divalent cations. The use of divalent gelling ions, such as Ca2+, Ba2+ or Sr2+, provides thermostable homogeneous or heterogeneous hydrogels where the block composition affects both macroscopic and microscopic properties. The mechanism of alginate gelation is still explained in terms of the original egg-box model, although over the years some novel insights have been proposed. In this review we summarize several decades of research related to structure-functionships in alginates in the presence of non-gelling and gelling cations and present some novel applications in the field of self-assembling nanoparticles and use of radionuclides.
Subject(s)
Alginates , Hydrogels , Cations , Macromolecular Substances , MetalsABSTRACT
Experimental and theoretical data have been revisited to shed light onto the aspects of hydration and chain expansion of pectic acid (galacturonan) upon charging. The prediction of the variation of the number of solvation water molecules between the two limit ionization states from theoretical calculations was confirmed to a very high accuracy by the corresponding number evaluated form dilatometric measurements. The relevance of hydration to the mechanism of bonding of calcium ions by sodium pectate is discussed. Characterization of polymer expansion has been obtained by calculating the values of the characteristic ratio and/or the persistence length on the respective populations and comparing the theoretical predictions with experimental data. The results show that a charged chain in typical conditions of ionic strength is more expanded than its neutral counterpart, whereas the ideal limit (31 and 21) helical conformations in the uncharged and totally charged conditions, respectively, share the same value of the linear advance of the helical repeat, when the ionic strength tends to infinite. Total divergence between theoretical predictions and experimental evidence rules out the possibility that carboxylate charge reduction by protonation and by methyl esterification are equivalent in determining the solution behavior of galacturonan.