ABSTRACT
The preparation and characterization of a hybrid composite, based on carbon cloth (CC) matrix functionalized with two-dimensional (2D) MoS2 flakes and MoO3, and its use for developing an electrochemical sensor for the determination of riboflavin (RF) is here reported. The 2D-MoS2-MoO3CC composite was prepared by depositing 2D-MoS2 nanosheets, obtained by liquid phase exfoliation (LPE), on the surface of a carbon cloth fiber network, previously functionalized with a layer of molybdenum oxide (α-MoO3) by radio-frequency magnetron reactive sputtering technique. The 2D-MoS2-MoO3CC composite was characterized by scanning electron microscopy and energy dispersive X-ray analysis (SEM-EDX), and Raman spectroscopy. An electrochemical sensor has been then fabricated by fixing a slice of the 2D-MoS2-MoO3CC composite on the working electrode of a screen-printed carbon electrode (SPCE). The 2D-MoS2-MoO3-CC/SPCE sensor display good electrochemical characteristics which have been exploited, for the first time, in the electroanalytical determination of riboflavin (RF). The sensitivity to RF, equal to 0.67 µA mM-1 in the linear range from 2 to 40 µM, and a limit of detection (LOD) of 1.5 µM at S/N = 3, demonstrate the promising characteristics of the proposed 2D-MoS2-MoO3-CC/SPCE electrochemical sensor for the determination of riboflavin.
ABSTRACT
Our understanding of the fate and distribution of micro- and nano- plastics in the marine environment is limited by the intrinsic difficulties of the techniques currently used for the detection, quantification, and chemical identification of small particles in liquid (light scattering, vibrational spectroscopies, and optical and electron microscopies). Here we introduce Raman Tweezers (RTs), namely optical tweezers combined with Raman spectroscopy, as an analytical tool for the study of micro- and nanoplastics in seawater. We show optical trapping and chemical identification of sub-20 µm plastics, down to the 50 nm range. Analysis at the single particle level allows us to unambiguously discriminate plastics from organic matter and mineral sediments, overcoming the capacities of standard Raman spectroscopy in liquid, intrinsically limited to ensemble measurements. Being a microscopy technique, RTs also permits one to assess the size and shapes of particles (beads, fragments, and fibers), with spatial resolution only limited by diffraction. Applications are shown on both model particles and naturally aged environmental samples, made of common plastic pollutants, including polyethylene, polypropylene, nylon, and polystyrene, also in the presence of a thin eco-corona. Coupled to suitable extraction and concentration protocols, RTs have the potential to strongly impact future research on micro and nanoplastics environmental pollution, and enable the understanding of the fragmentation processes on a multiscale level of aged polymers.
Subject(s)
Plastics , Water Pollutants, Chemical , Environmental Monitoring , Polystyrenes , SeawaterABSTRACT
Microengines have shown promise for a variety of applications in nanotechnology, microfluidics, and nanomedicine, including targeted drug delivery, microscale pumping, and environmental remediation. However, achieving precise control over their dynamics remains a significant challenge. In this study, we introduce a microengine that exploits both optical and thermal effects to achieve a high degree of controllability. We find that in the presence of a strongly focused light beam, a gold-silica Janus particle becomes confined at the stationary point where the optical and thermal forces balance. By using circularly polarized light, we can transfer angular momentum to the particle, breaking the symmetry between the two forces and resulting in a tangential force that drives directed orbital motion. We can simultaneously control the velocity and direction of rotation of the particle changing the ellipticity of the incoming light beam while tuning the radius of the orbit with laser power. Our experimental results are validated using a geometrical optics phenomenological model that considers the optical force, the absorption of optical power, and the resulting heating of the particle. The demonstrated enhanced flexibility in the control of microengines opens up new possibilities for their utilization in a wide range of applications, including microscale transport, sensing, and actuation.
ABSTRACT
The recognition of some globular proteins was carried out in aqueous solution, at micromolar concentrations, by using an uncharged symmetrical cobalt-porphyrin (Co-P). By means of UV/Vis, induced circular dichroism, and fluorescence spectroscopy techniques, it was ascertained that the interactions between specific amino acid residues and Co-P occurred on the protein surface. In particular, spectroscopic evidence showed the formation of supramolecular complexes without disruption of the native structure of the proteins and, furthermore, that signal changes were characteristic of each Co-P/protein system, so that they could be used as a highly sensitive analytical tool for protein recognition. The relative association constants were proportional to the protein molecular masses (and then to the number of amino acid residues).
Subject(s)
Amino Acids/chemistry , Cobalt/chemistry , Metalloporphyrins/chemistry , Proteins/chemistry , Circular Dichroism , Molecular Structure , Porphyrins/chemistry , Spectrometry, FluorescenceABSTRACT
UV/vis absorption and time-resolved fluorescence measurements on alcoholic solutions of meso-tetrakis(4-sulfonatophenyl)porphyrin (TPPS(4)) in neutral and acid form have been performed as a function of the alcohol polarity. These solutions show a peculiar behavior that mimics porphyrin in confined water solutions. In alcohols, TPPS(4) exhibits a metastable phase showing the formation of new species in analogy with the confined water environment of AOT microemulsions. Various species have been detected at different pH values and on aging the solutions. Under neutral pH conditions, the porphyrin is present as free base monomer (S415) with a small amount of H-dimeric species (S400). On aging, the S415 leads to the formation of a new species (S423), which has been assigned as a J-type dimer of the neutral porphyrin. The species S400 and S423 are not present in bulk water solution but are typical of TPPS(4) in confined water. On decreasing pH, the S415 almost immediately converts into the diacid form (S438), which evolves toward red-shifted J-aggregates (S490) and blue-shifted H-aggregates (S420). On decreasing alcohol polarity, the kinetic evolution from fresh to aged solution and from the monomeric diacid species to H- and J-aggregates speeds up. Exploiting the amphiphilic character of short chain alcohols and widely varying their polarity, we were able to enhance in bulk conditions the peculiar behavior observed in close proximity to the microemulsion wall.
ABSTRACT
Optical forces are used to aggregate plasmonic nanoparticles and create SERS-active hot spots in liquid. When biomolecules are added to the nanoparticles, high sensitivity SERS detection can be accomplished. Here, we pursue studies on Bovine Serum Albumin (BSA) detection, investigating the BSA-nanorod aggregations in a range from 100 µM to 50 nM by combining light scattering, plasmon resonance and SERS, and correlating the SERS signal with the concentration. Experimental data are fitted with a simple model describing the optical aggregation process. We show that BSA-nanorod complexes can be optically printed on non-functionalized glass surfaces, designing custom patterns stable with time. Furthermore, we demonstrate that this methodology can be used to detect catalase and hemoglobin, two Raman resonant biomolecules, at concentrations of 10 nM and 1 pM, respectively, i.e., well beyond the limit of detection of BSA. Finally, we show that nanorods functionalized with specific aptamers can be used to capture and detect Ochratoxin A, a fungal toxin found in food commodities and wine. This experiment represents the first step towards the addition of molecular specificity to this novel biosensor strategy.
ABSTRACT
Strategies for in-liquid molecular detection via Surface Enhanced Raman Scattering (SERS) are currently based on chemically-driven aggregation or optical trapping of metal nanoparticles in presence of the target molecules. Such strategies allow the formation of SERS-active clusters that efficiently embed the molecule at the "hot spots" of the nanoparticles and enhance its Raman scattering by orders of magnitude. Here we report on a novel scheme that exploits the radiation pressure to locally push gold nanorods and induce their aggregation in buffered solutions of biomolecules, achieving biomolecular SERS detection at almost neutral pH. The sensor is applied to detect non-resonant amino acids and proteins, namely Phenylalanine (Phe), Bovine Serum Albumin (BSA) and Lysozyme (Lys), reaching detection limits in the µg/mL range. Being a chemical free and contactless technique, our methodology is easy to implement, fast to operate, needs small sample volumes and has potential for integration in microfluidic circuits for biomarkers detection.