Defect Engineering Simultaneously Regulating Exciton Dissociation in Carbon Nitride and Local Electron Density in Pt Single Atoms Toward Highly Efficient Photocatalytic Hydrogen Production.

The high exciton binding energy (Eb) and sluggish surface reaction kinetics have severely limited the photocatalytic hydrogen production activity of carbon nitride (CN). Herein, a hybrid system consisting of nitrogen defects and Pt single atoms is constructed through a facile self-assembly and photodeposition strategy. Due to the acceleration of exciton dissociation and regulation of local electron density of Pt single atoms along with the introduction of nitrogen defects, the optimized Pt-MCT-3 exhibits a hydrogen production rate of 172.0 µmol h-1 (λ ≥ 420 nm), ≈41 times higher than pristine CN. The apparent quantum yield for the hydrogen production is determined to be 27.1% at 420 nm. The experimental characterizations and theoretical calculations demonstrate that the nitrogen defects act as the electron traps for the exciton dissociation, resulting in a decrease of Eb from 86.92 to 43.20 meV. Simultaneously, the stronger interaction between neighboring nitrogen defects and Pt single atoms directionally drives free electrons to aggregate around Pt single atoms, and tailors the d-band electrons of Pt, forming a moderate binding strength between Pt atoms and H* intermediates.

Photonic time-delayed reservoir computing based on series-coupled microring resonators with high memory capacity.

On-chip microring resonators (MRRs) have been proposed to construct time-delayed reservoir computing (RC) systems, which offer promising configurations available for computation with high scalability, high-density computing, and easy fabrication. A single MRR, however, is inadequate to provide enough memory for the computation task with diverse memory requirements. Large memory requirements are satisfied by the RC system based on the MRR with optical feedback, but at the expense of its ultralong feedback waveguide. In this paper, a time-delayed RC is proposed by utilizing a silicon-based nonlinear MRR in conjunction with an array of linear MRRs. These linear MRRs possess a high quality factor, providing enough memory capacity for the RC system. We quantitatively analyze and assess the proposed RC structure's performance on three classical tasks with diverse memory requirements, i.e., the Narma 10, Mackey-Glass, and Santa Fe chaotic timeseries prediction tasks. The proposed system exhibits comparable performance to the system based on the MRR with optical feedback, when it comes to handling the Narma 10 task, which requires a significant memory capacity. Nevertheless, the dimension of the former is at least 350 times smaller than the latter. The proposed system lays a good foundation for the scalability and seamless integration of photonic RC.

Magnetic-free polarization rotation in an atomic vapor cell.

Magnetic-free nonreciprocal optical devices have attracted great attention in recent years. Here, we investigated the magnetic-free polarization rotation of light in an atom vapor cell. Two mechanisms of magnetic-free nonreciprocity have been realized in ensembles of hot atoms, including electromagnetically induced transparency and optically-induced magnetization. For a linearly polarized input probe light, a rotation angle up to 86.4° has been realized with external control and pump laser powers of 10 mW and is mainly attributed to the optically-induced magnetization effect. Our demonstration offers a new approach to realize nonreciprocal devices, which can be applied to solid-state atom ensembles and may be useful in photonic integrated circuits.

Octave soliton microcombs in lithium niobate microresonators.

Soliton microcombs are regarded as an ideal platform for applications such as optical communications, optical sensing, low-noise microwave sources, optical atomic clocks, and frequency synthesizers. Many of these applications require a broad comb spectrum that covers an octave, essential for implementing the f - 2f self-referencing techniques. In this work, we have successfully generated an octave-spanning soliton microcomb based on a z-cut thin-film lithium niobate (TFLN) microresonator. This achievement is realized under on-chip optical pumping at 340 mW and through extensive research into the broadening of dual dispersive waves (DWs). Furthermore, the repetition rate of the octave soliton microcomb is accurately measured using an electro-optic comb generated by an x-cut TFLN racetrack microresonator. Our results represent a crucial step toward the realization of practical, integrated, and fully stabilized soliton microcomb systems based on TFLN.

Fluorescence collection efficiency of atoms in dipole traps.

The fluorescence collection from single atoms and emitters has been extensively utilized in quantum information and quantum optics research. Here, we investigated the collection efficiency of an objective lens by drawing an analogy between the free-space beam (FSB) and a waveguide mode. We explored how efficiency is influenced by their thermal motion within a dipole trap. Furthermore, we introduce an effective energy fraction ratio to quantify potential imperfections in the focusing of the objective lens. Our results provide valuable insights for optimizing the fluorescence collection in single-atom experiments and highlight the importance of considering realistic experimental conditions when estimating achievable efficiencies.

High-Q integrated lithium tantalate microring resonators for on-chip comb generation.

Lithium tantalate on insulator (LTOI), taking advantage of high cost-effectiveness, ultra-low optical loss, and prominent electro-optic (EO) coefficient, shows great potential as an integrated waveguide-based optical platform for commercialization. Further research on monolithic nonlinear source generators with tunable features is crucial in its early stages. Here, we fabricate low-loss microring resonators (intrinsic Q value above 4 × 106) via universal subtractive manufacturing. Both Kerr and EO combs are realized based on X-cut LTOI high-Q resonators. Specifically, we elucidate the complicated synergy caused by a photorefractive (PR) effect and thermo-optic modulation, observing the soliton step using the facile laser scanning technique. Furthermore, the preliminary experimental result of the static EO comb is also exploited in a 20 GHz free spectral range (FSR) LTOI microring resonator, verifying the versatility of this unique photonic platform for on-chip microcomb generation.

Repetition rate tuning and locking of solitons in a microrod resonator.

Recently, there has been significant interest in the generation of coherent temporal solitons in optical microresonators. In this Letter, we present a demonstration of dissipative Kerr soliton generation in a microrod resonator using an auxiliary-laser-assisted thermal response control method. In addition, we are able to control the repetition rate of the soliton over a range of 200 kHz while maintaining the pump laser frequency, by applying external stress tuning. Through the precise control of the PZT voltage, we achieve a stability level of 3.9 × 10-10 for residual fluctuation of the repetition rate when averaged 1 s. Our platform offers precise tuning and locking capabilities for the repetition frequency of coherent mode-locked combs in microresonators. This advancement holds great potential for applications in spectroscopy and precision measurements.

Optomechanical Frequency Comb Based on Multiple Nonlinear Dynamics.

Phonon-based frequency combs that can be generated in the optical and microwave frequency domains have attracted much attention due to the small repetition rates and the simple setup. Here, we experimentally demonstrate a new type of phonon-based frequency comb in a silicon optomechanical crystal cavity including both a breathing mechanical mode (∼GHz) and flexural mechanical modes (tens of MHz). We observe strong mode competition between two approximate flexural mechanical modes, i.e., 77.19 and 90.17 MHz, resulting in only one preponderant lasing, while maintaining the lasing of the breathing mechanical mode. These simultaneous observations of two-mode phonon lasing state and significant mode competition are counterintuitive. We have formulated comprehensive theories to elucidate this phenomenon in response to this intriguing outcome. In particular, the self-pulse induced by the free carrier dispersion and thermo-optic effects interacts with two approximate flexural mechanical modes, resulting in the repetition rate of the comb frequency-locked to exact fractions of one of the flexural mechanical modes and the mode hopping between them. This phonon-based frequency comb has at least 260 comblines and a repetition rate as low as a simple fraction of the flexural mechanical frequency. Our demonstration offers an alternative optomechanical frequency comb for sensing, timing, and metrology applications.

Photoinduced Redox Cascade Reaction of Isatins and Aliphatic Carboxylic Acids to Access 6-Hydroxyindoloquinazolinones.

A visible-light-induced cascade reaction is described for the one-pot synthesis of 6-hydroxyindoloquinazolinones using isatins (or isatins and isatoic anhydrides) and aliphatic carboxylic acids. The method provides 36 desired products in 33-96 % yield, exhibiting broad substrate scope and good functional group tolerance. This approach utilizes inexpensive and commercially available starting materials, enabling the direct construction of high-value complex structures under mild conditions without the need for photocatalyst, showcasing significant applicability and environmental friendliness.

Photoredox-Neutral Radical-Radical Cross-Coupling of Isatins and Benzyl Carboxylic Acids.

A photoredox-neutral radical-radical cross-coupling is described for the synthesis of 3-hydroxy-3-alkyloxindoles using isatins and benzyl carboxylic acids as substrates and 2,4,5,6-tetra(9H-carbazol-9-yl)isophthalonitrile (4CzIPN) as the photocatalyst. The method features a broad substrate scope and good functional group tolerance, providing 30 sterically hindered alcohols with moderate to excellent yields. This approach utilizes inexpensive and commercially available starting materials, avoiding the use of transition metals, extra oxidants/reductants, and harsh reaction conditions, showcasing significant applicability and environmental friendliness.

Visible Light-Induced Hydroacylation of Benzylidenemalononitriles with Aroyl Chlorides Using Silane as a Hydrogen Donor.

A novel photoredox-catalyzed direct hydroacylation of benzylidenemalononitriles is described. In this method, aroyl chlorides are employed as a readily available and affordable source of acyl groups, while commercially available tris(trimethylsilyl)silane acts as both the hydrogen atom donor and electron donor. By eliminating the requirement for complex synthesis of acyl precursors and hydrogen atom-transfer (HAT) reagents, this approach offers a convenient and efficient strategy for the hydroacylation of benzylidenemalononitriles.

Unveiling the mechanism of source-sink rebalancing in cucumber-pumpkin heterografts: the buffering roles of rootstock cotyledon.

Grafting onto pumpkin rootstock is widely applied in cucumber production to improve growth and yield, as well as to overcome soil-borne diseases and enhance resistance to abiotic stresses. In this study, we constructed the cucumber-pumpkin heterografts with the one-cotyledon grafting method, and examined the effects of heterografting on biomass allocation and sugar partitioning, with cucumber and pumpkin self-grafts used as control. Compared with cucumber self-grafts, heterografting onto pumpkin rootstock promoted photosynthesis in cucumber scion, and led to higher sucrose contents in the 1st true leaf (source) and newly emerged leaf (sink). Thereby, the scion part of heterografts accumulated more biomass than cucumber self-grafts. In contrast, when compared to pumpkin self-grafts, grafting with cucumber scion reduced root vigor and biomass but promoted cotyledon growth in pumpkin rootstock. The roots (sink) of heterografts contained less sucrose and hexoses, and showed reduced sucrose synthase (SuSy) and hexokinase (HXK) activities. However, the rootstock cotyledon (source) contained more sucrose and starch, and showed higher activities of HXK, cell-wall invertase (CWIN), and enzymes for starch synthesis and degradation. Furthermore, removal or shade of rootstock cotyledon led to reduced growth of root and scion. Silencing of CmoMEX1a gene in rootstock cotyledon inhibited maltose export and reduced root growth of heterografts. These results indicated that rootstock cotyledon, especially its starch content, played a buffering role in the growth regulation of cucumber-pumpkin heterografts. Taken together, our results provided a major contribution to our understanding of source-sink sugar partitioning and scion-rootstock growth balancing in cucumber-pumpkin heterografts.

Updates on infectious diseases of largemouth bass: A major review.

The largemouth bass (Micropterus salmoides) is native to North America and has now become a crucial economic species in aquaculture. With the rapid development of high-density intensive farming models, the continuous emergence and spread of diseases pose significant challenges to the sustainable development of largemouth bass aquaculture, including Micropterus salmoides rhabdovirus (MSRV), largemouth bass virus (LMBV), Nocardia spp. and Aeromonas spp. Here, we provide a comprehensive overview of the latest research progress on common diseases of largemouth bass, including pathogen isolation and identification, pathological characteristics, morphological features, epidemiological characteristics, pathogen-host interactions, detection and diagnosis, vaccines, and other control technologies. This information will enhance a more comprehensive understanding of the occurrence of diseases in largemouth bass, and provide insights into future research directions, facilitating more effective disease prevention and control. The collaborative progress among rapid detection technology, the interaction mechanism between pathogen and host, and prevention and control techniques will be the curial to achieving green prevention and control of largemouth bass disease and healthy aquaculture in future.

Generation of selenium-rich wheat mutants and exploration of responsive genes for selenium accumulation.

KEY MESSAGE: Salt tolerance, selenium accumulation and expression of the responsive genes were analyzed in the wheat high selenium mutants. Selenium is an essential trace element for the human body, and its deficiency can lead to various diseases such as Keshan disease and large bone disease. Wheat, being a major staple crop, plays a crucial role in providing dietary selenium supplementation to combat this deficiency. Despite progress in understanding the molecular regulation of selenium accumulation in certain crops, the molecular mechanisms governing selenium accumulation-related gene expression in wheat plants remain poorly understood. In this study, three mutant wheat lines with elevated selenium content were identified. Under the treatment of Na2SeO3 or NaCl, the selenium-rich wheat mutants exhibited decreased sensitivity to both selenium and NaCl compared to the wild type. Additionally, there was an increase in the activities of SOD and POD, while the content of MDA decreased. Through qRT-PCR analysis, the expression of selenium-related genes was affected, revealing that some of these genes not only regulate the response of wheat to salt stress, but also play a role in the process of selenium accumulation. The transcriptome results revealed that the important genes encoding glutathione S-transferases, peroxidases, superoxide dismutases, and UDP-glucosyltransferases may function in the regulation of salt tolerance and selenium accumulation in wheat. These findings significantly contribute to the current understanding of the molecular regulation of selenium accumulation in wheat crops, while also offering novel germplasm resources for cultivating selenium-rich and salt-tolerant wheat lines.

The Arabidopsis RTH plays an important role in regulation of iron (Fe) absorption and transport.

KEY MESSAGE: RTH may activate Fe assimilation related genes to promote Fe absorption, transport and accumulation in Arabidopsis. Iron (Fe) is an important nutrient element. The Fe absorption and transport in plants are well investigated over the past decade. Our previous work indicated that RTE1-HOMOLOG (RTH), the homologous gene of reversion-to-ethylene sensitivity 1 (RTE1), plays a role in ethylene signaling pathway. However, its function in Fe absorption and transport is largely unknown. In the present study, we found that RTH was expressed in absorptive tissue and conducting tissue, including root hairs, root vascular bundle, and leaf veins. Under high Fe concentration, the seedling growth of rth-1 mutant was better, while the RTH overexpression lines were retarded compared to the wild type (Col-0). When treated with EDTA-Fe3+ (400 µM), the chlorophyll content and ion leakage rate were higher and lower in rth-1 than those of Col-0, respectively. By contrast, the chlorophyll contents and ion leakage rates of RTH overexpression lines were decreased and hastened compared with Col-0, respectively. Fe measurement indicated that the Fe contents of rth-1 were lower than those of Col-0, whereas those of RTH overexpression lines were comparably higher. Gene expression analysis revealed that Fe absorption and transport genes AHA2, IRT1, FIT, FPN1, and YSL1 decreased in rth-1 but increased in RTH overexpression lines compared with Col-0. Additionally, Y2H (yeast two-hybrid) and BiFC (bimolecular fluorescence complementation) assays showed that RTH can physically interact with hemoglobin 1 (HB1) and HB2. All these findings suggest that RTH may play an important role in regulation of Fe absorption, transport, and accumulation in Arabidopsis.

The RNA helicase LOS4 regulates pre-mRNA splicing of key genes (EIN2, ERS2, CTR1) in the ethylene signaling pathway.

KEY MESSAGE: The Arabidopsis RNA helicase LOS4 plays a key role in regulating pre-mRNA splicing of the genes EIN2, CTR1, and ERS2 in ethylene signaling pathway. The plant hormone ethylene plays diverse roles in plant growth, development, and responses to stress. Ethylene is perceived by the membrane-bound ethylene receptors complex, and then triggers downstream components, such as EIN2, to initiate signal transduction into the nucleus, leading to the activation of ethylene-responsive genes. Over the past decades, substantial information has been accumulated regarding gene cloning, protein-protein interactions, and downstream gene expressions in the ethylene pathway. However, our understanding of mRNA post-transcriptional processing and modification of key genes in the ethylene signaling pathway remains limited. This study aims to provide evidence demonstrating the involvement of the Arabidopsis RNA helicase LOS4 in pre-mRNA splicing of the genes EIN2, CTR1, and ERS2 in ethylene signaling pathway. Various genetic approaches including RNAi gene silencing, CRISPR-Cas9 gene editing, and amino acid mutations were employed in this study. When LOS4 was silenced or knocked down, the ethylene sensitivity of etiolated seedlings was significantly enhanced. Further investigation revealed errors in the EIN2 pre-mRNA splicing when LOS4 was knocked down. In addition, aberrant pre-mRNA splicing was observed in the ERS2 and CTR1 genes in the pathway. Biochemical assays indicated that the los4-2 (E94K) mutant protein exhibited increased ATP binding and enhanced ATP hydrolytic activity. Conversely, the los4-1 (G364R) mutant had reduced substrate RNA binding and lower ATP binding activities. These findings significantly advanced our comprehension of the regulatory functions and molecular mechanisms of RNA helicase in ethylene signaling.

Estimation of Attributable Risk and Direct Medical and Non-Medical Costs of Major Mental Disorders Associated With Air Pollution Exposures Among Children and Adolescents in the Republic of Korea, 2011-2019.

BACKGROUND: Recent studies have reported the burden of attention deficit hyperactivity disorder [ADHD], autism spectrum disorder [ASD], and depressive disorder. Also, there is mounting evidence on the effects of environmental factors, such as ambient air pollution, on these disorders among children and adolescents. However, few studies have evaluated the burden of mental disorders attributable to air pollution exposure in children and adolescents. METHODS: We estimated the risk ratios of major mental disorders (ADHD, ASD, and depressive disorder) associated with air pollutants among children and adolescents using time-series data (2011-2019) obtained from a nationwide air pollution monitoring network and healthcare utilization claims data in the Republic of Korea. Based on the estimated risk ratios, we determined the population attributable fraction (PAF) and calculated the medical costs of major mental disorders attributable to air pollution. RESULTS: A total of 33,598 patients were diagnosed with major mental disorders during 9 years. The PAFs for all the major mental disorders were estimated at 6.9% (particulate matter < 10 µm [PM10]), 3.7% (PM2.5), and 2.2% (sulfur dioxide [SO2]). The PAF of PM10 was highest for depressive disorder (9.2%), followed by ASD (8.4%) and ADHD (5.2%). The direct medical costs of all major mental disorders attributable to PM10 and SO2 decreased during the study period. CONCLUSION: This study assessed the burden of major mental disorders attributable to air pollution exposure in children and adolescents. We found that PM10, PM2.5, and SO2 attributed 7%, 4%, and 2% respectively, to the risk of major mental disorders among children and adolescents.

Challenges in removing an aged spinal cord stimulator: A case study of complete fracture in a 9-year-old S-series paddle lead.

INTRODUCTION: This case report presents an instance of an S-Series™ slim paddle lead fracturing during extraction, highlighting potential risks associated with the removal of this lead. CASE REPORT: A 47-year-old male with complex regional pain syndrome type 2, unresponsive to pharmacotherapy, had undergone the implantation of two spinal cord stimulator (SCS) leads, an Octrode™ cylindrical and an S-series™ slim paddle, using the Epiducer™ system (St Jude Medical) 9 years earlier, with a subsequent intrathecal baclofen pump installed 1 year after SCS. Initially, these interventions stabilized the patient's pain symptoms. However, the diminishing effectiveness of SCS, coupled with a decrease in battery life and increased opioid consumption, necessitated recent surgical procedures. These included the removal and replacement of the implantable pulse generator (IPG) and leads to improve pain management and ensure MRI compatibility. During the removal of the S-series™ slim paddle type lead, complications arose, leading to the retention of an electrode fragment, which necessitated abandoning the replacement of both the IPG and lead. Post-surgical assessments revealed no new neurological impairments, and imaging studies confirmed the stable position of the retained fragment. The patient was discharged with a continued comprehensive pain management plan. CONCLUSION: This case highlights the challenges and risks of percutaneous removal of slim paddle type leads, emphasizing the need for careful procedural planning and consideration of surgical options to avoid complications. Further research is needed to evaluate the long-term durability and removal risks of various SCS lead types.

ABA-responsive AREB1/ABI3-1/ABI5 cascade regulates IAA oxidase gene SlDAO2 to inhibit hypocotyl elongation in tomato.

Hypocotyl elongation is dramatically influenced by environmental factors and phytohormones. Indole-3-acetic acid (IAA) plays a prominent role in hypocotyl elongation, whereas abscisic acid (ABA) is regarded as an inhibitor through repressing IAA synthesis and signalling. However, the regulatory role of ABA in local IAA deactivation remains largely uncharacterized. In this study, we confirmed the antagonistic interplay of ABA and IAA during the hypocotyl elongation of tomato (Solanum lycopersicum) seedlings. We identified an IAA oxidase enzyme DIOXYGENASE FOR AUXIN OXIDATION2 (SlDAO2), and its expression was induced by both external and internal ABA signals in tomato hypocotyls. Moreover, the overexpression of SlDAO2 led to a reduced sensitivity to IAA, and the knockout of SlDAO2 alleviated the inhibitory effect of ABA on hypocotyl elongation. Furthermore, an ABA-responsive regulatory SlAREB1/SlABI3-1/SlABI5 cascade was identified to act upstream of SlDAO2 and to precisely control its expression. SlAREB1 directly bound to the ABRE present in the SlDAO2 promoter to activate SlDAO2 expression, and SlABI3-1 enhanced while SlABI5 inhibited the activation ability of SlAREB1 by directly interacting with SlAREB1. Our findings revealed that ABA might induce local IAA oxidation and deactivation via SlDAO2 to modulate IAA homoeostasis and thereby repress hypocotyl elongation in tomato.

Thermal oscillation in the hybrid Si3N4 - TiO2 microring.

The hybrid microcavity composed of different materials shows unique thermal-optical properties such as resonance frequency shift and small thermal noise fluctuations with the temperature variation. Here, we have fabricated the hybrid Si3N4 - TiO2 microring, which decreases the effective thermo-optical coefficients (TOC) from 23.2pm/K to 11.05pm/K due to the opposite TOC of these two materials. In this hybrid microring, we experimentally study the thermal dynamic with different input powers and scanning speeds. The distorted transmission and thermal oscillation are observed, which results from the non-uniform scanning speed and the different thermal relaxation times of the Si3N4 and the TiO2. We calibrate the distorted transmission spectrum for the resonance measurement at the reverse scanning direction and explain the thermal oscillation with a thermal-optical coupled model. Finally, we analyse the thermal oscillation condition and give the diagram about the oscillation region, which has significant guidance for the occurrence and avoidance of the thermal oscillation in practical applications.