In situ and Real-time Monitoring the Chemical and Thermal Evolution of Lithium-ion Batteries with Single-crystalline Ni-rich Layered Oxide Cathode.

High-capacity Ni-rich layered oxides are promising cathode materials for fabrication of lithium-ion batteries (LIBs) with high energy density. However, thermal runaway of LIBs with these cathodes leads to great safety concerns. In this study, single crystalline LiNi0.9Co0.05Mn0.05O2 (NCM-SC) has been prepared and a flexible optical fiber was buried inside the pouch-type LIBs with NCM-SC cathode to in situ study its real-time temperature evolution during charge/discharge process. NCM-SC exhibits an enhanced Li+ ions transportation efficiency and electrode reaction kinetics, which can effectively reduce the generation of polarization heat and mitigate the internal temperature rise of the pouch-type battery. Meanwhile, solid-electrolyte interface (SEI) film decomposition and gas accumulation are effectively alleviated, due to the enhanced thermal stability of SEI film formed on NCM-SC. Moreover, the single crystal architecture can effectively retard layered to spinal and rock-salt phase transition, mitigate the crack formation and structural collapse. Consequently, NCM-SC exhibits an excellent electrochemical performance and enhanced thermal stability.

Regulation of glial size by eicosapentaenoic acid through a novel Golgi apparatus mechanism.

Coordination of cell growth is essential for the development of the brain, but the molecular mechanisms underlying the regulation of glial and neuronal size are poorly understood. To investigate the mechanisms involved in glial size regulation, we used Caenorhabditis elegans amphid sheath (AMsh) glia as a model and show that a conserved cis-Golgi membrane protein eas-1/GOLT1B negatively regulates glial growth. We found that eas-1 inhibits a conserved E3 ubiquitin ligase rnf-145/RNF145, which, in turn, promotes nuclear activation of sbp-1/ SREBP, a key regulator of sterol and fatty acid synthesis, to restrict cell growth. At early developmental stages, rnf-145 in the cis-Golgi network inhibits sbp-1 activation to promote the growth of glia, and when animals reach the adult stage, this inhibition is released through an eas-1-dependent shuttling of rnf-145 from the cis-Golgi to the trans-Golgi network to stop glial growth. Furthermore, we identified long-chain polyunsaturated fatty acids (LC-PUFAs), especially eicosapentaenoic acid (EPA), as downstream products of the eas-1-rnf-145-sbp-1 pathway that functions to prevent the overgrowth of glia. Together, our findings reveal a novel and potentially conserved mechanism underlying glial size control.

Enabling high rate capability and stability all-solid-state batteries via cationic surfactant modification of composite electrolyte.

The garnet-type solid electrolyte Li6.4La3Zr1.4Ta0.6O12 (LLZTO) was modified with a cationic surfactant Cetyltrimethylammonium Bromide (CTAB) to improve the dispersion of LLZTO inorganic particles in Poly (ethylene oxide) (PEO) electrolyte (PEO-LLZTO@CTAB) by a liquid phase casting method. During fabrication, the cationic modifier CTAB is uniformly adsorbed on the surface of LLZTO particles, which can effectively reduce their surface energy and lead to a thin CTAB surface coating layer. This fabricated PEO-LLZTO@CTAB can avoid the aggregation of LLZTO particles in the composite solid-state electrolyte (CSSE) and improve the interfacial contact at the PEO/LLZTO interface, thus reducing the overall resistance of PEO-LLZTO@CTAB/Li half-cell and inhibiting the dendrite growth during cycling. The all-solid-state batteries (ASSBs) with LiFePO4 (LFP) as the cathode, PEO-LLZTO@CTAB as the electrolyte and Li as the anode exhibit a high initial discharge capacity of 146.6 mAh-g-1, excellent rate performance and high-capacity retention of 91.0 % after 300 cycles at 0.2 C multiplier and 60 °C within the voltage range of 2.7-4.0 V.

PEDOT-intercalated NH4V3O8 nanobelts as high-performance cathode materials for potassium ion batteries.

Potassium ion batteries (PIBs) have great potential to replace lithium ion batteries (LIBs) for large-scale energy storage applications because of the low cost and earth abundance of potassium resources. However, it is critically challenging to exploit an appropriate cathode material to accommodate the large size of K+. Herein, a conducting polymer (PEDOT) intercalation method is utilized to tailor the interlayer spacing of NH4V3O8 nanobelts from 7.8 Å to 10.8 Å, and afford rich oxygen vacancies inside the vanadate, thus enhancing its electronic conductivity and accelerating the K+ insertion/extraction kinetics. Benefiting from these features, PEDOT-intercalated NH4V3O8 (PNVO) nanobelts deliver an improved capacity of 87 mA h g-1 at 20 mA g-1, high rate capability of 51 mA h g-1 at 500 mA g-1, and a stable cycle life (capacity retention of 92.5 % after 100 cycles at 50 mA g-1). Even cycled at 200 mA g-1, PNVO nanobelts feature a long cycle life over 300 cycles with a capacity retention of 71.7 %. This work is of great significance for exploitation of PIBs cathode with improved electrochemical performance through pre-intercalation and defect engineering.

CNT-Decorated Na3V2(PO4)3 Microspheres as a High-Rate and Cycle-Stable Cathode Material for Sodium Ion Batteries.

A novel cathode material, carbon nanotube (CNT)-decorated Na3V2(PO4)3 (NVP) microspheres, was designed and synthesized via spray-drying and carbothermal reduction methods. The microspheres were covered and embedded by CNTs, the surfaces of which were also covered by amorphous carbon layers. Thus, a carbon network composed of CNTs and amorphous carbon layers formed in the materials. The polarization of a 10 wt % CNT-decorated NVP (NVP/C10) electrode was much less compared with that of the electrode with pristine NVP without CNTs. The capacity of the NVP/C10 electrode only decreased from 103.2 to 76.2 mAh g-1 when the current rates increased from 0.2 to 60 C. Even when cycled at a rate of 20 C, the initial discharge capacity of the NVP/C10 electrode was as high as 91.2 mAh g-1, and the discharge capacity was 76.9 mAh g-1 after 150 cycles. The charge-transfer resistance and ohmic resistance became smaller because of CNT decorating. Meanwhile, the addition of CNTs can tune the size of the NVP particles and increase the contact area between NVP and the electrolyte. Consequently, the resulted NVP had a larger sodium ion diffusion coefficient than that of the pristine NVP.