An insight into clustering of halogenated anesthetics molecules in metal-organic frameworks: Evidence of adsorbate self-association in micropores.

In order to better understand the adsorption of volatile halogenated anesthetics on metal organic frameworks (MOFs), sevoflurane vapor adsorption experiments were performed on commercial MOF-177 at different temperatures. Due to the surface homogeneity of such an adsorbent, arising from its almost unimodal pore size distribution and the absence of specific, coordinatively unsaturated adsorption active sites, sevoflurane adsorption isotherms exhibited a peculiar deviation from the Langmuirian behavior. Consequently, they show a "kink" at a specific pressure that increases with increasing equilibrium temperature. Successful modeling of such data by means of the Talu-Meunier equation confirmed clustering of adsorbate molecules inside adsorbent micropores, similarly to water vapor adsorption on activated carbon, which may play an important role when designing a system using MOFs as the potential adsorbents for capturing anesthetics.

Toward observation of single-file diffusion using the tracer zero-length column method.

The tracer zero-length column (ZLC) method has been employed to study the diffusion of toluene in one-dimensional ZSM-12 and SAPO-5 zeolites. A significant deviation in the shape of the measured tracer exchange curves from monoexponential behavior was observed for toluene diffusion in both adsorbents in the limit of long-time asymptotes. In contrast, water/ZSM-12 and acetylene/SAPO-5 systems exhibit tracer exchange curves that are close to monoexponential behavior. Monoexponential curves are usually observed for systems obeying normal (Fickian) diffusion. Such diffusion is expected for the latter two systems because the diameters of both sorbates are less than the radii of their corresponding host channels. The differences in the shape of the tracer exchange curves for large and small sorbates can be explained by assuming the occurrence of anomalous, single-file diffusion for large sorbates in narrow, one-dimensional channels.

Structural and diffusion characterizations of steam-stable mesostructured zeolitic UL-ZSM-5 materials.

A series of mesoporous UL-ZSM-5 materials (Si/Al = 50) with different micro- and mesoporosity as well as crystallinity was prepared following the procedure proposed in one of our recent studies (Trong-On, D.; Kaliaguine, S. Angew. Chem. Int. Ed. 2001, 40, 3248-3251. Trong-On, D.; Kaliaguine, S. U.S. Patent 6,669,924, B1, 2003). These materials have zeolitic structure in the form of nanoparticles intergrown in the walls of the amorphous wormhole-like aluminosilicate mesopores of Al-Meso-50, which was used as a precursor in the synthesis. The structure, crystallinity, and textural properties of the synthesized materials, as well as a reference ZSM-5 zeolite sample, were determined by X-ray diffraction (XRD), transmission electron microscopy (TEM)/scanning electron microscoy (SEM) analyses, Fourier transform infrared spectroscopy (FTIR), 27Al magic angle spinning (MAS) nuclear magnetic resonance (NMR), and nitrogen adsorption/desorption techniques. The acid properties were examined by FTIR of adsorbed pyridine. UL-ZSM-5 materials were shown to be highly hydrothermally stable. The diffusion of two C7 hydrocarbons, i.e., n-heptane and toluene, in four UL-ZSM-5 materials with different microporosities, related acidities, and crystallinities were investigated using the zero-length column (ZLC) method. Furthermore, the wormhole-like mesostructured aluminosilicate precursor (Al-Meso-50) and a reference MFI zeolite sample were also investigated using the same technique. A theoretical model considering a combination of mesopore diffusion (with surface slip in the main channels) with an activated, mainly surface diffusion mechanism in the intrawall biporous structure, was proposed and employed to interpret the experimental ZLC results. A classical Knudsen type of diffusion was replaced by an activated surface slip type of diffusion mechanism in the mesopores. The transport of n-heptane in UL-ZSM-5 materials was found to be mainly controlled by mesopore diffusion in the main-channel structure, while that of toluene was dominated by the intrawall diffusion process. Diffusion activation energies of n-heptane are about 2 times higher in comparison to toluene, which has a larger kinetic diameter. The main mesopore channel structure seems to appreciably contribute to the overall mass transport. Furthermore, the effect of hydrothermal treatment (20% steam at 800 degrees C for 24 h) on the diffusion of these two sorbates on UL-ZSM-5 materials was also evaluated.

CO2 dynamic adsorption/desorption on zeolite 5A studied by 13C magnetic resonance imaging.

We present the first 13C magnetic resonance imaging study of CO2 transient adsorption/desorption processes in a zeolite 5A column. CO2 transient concentration profiles were measured with a centric scan spin-echo single point imaging technique. The adsorption wave profiles were determined under flow conditions, with the results analyzed by the Bohart-Adams model. The model adequately accounts for the spatial and the temporal behavior of CO2 in the column. CO2 adsorption rate constants were calculated from the fit. Desorption profiles were acquired by blowing a helium stream through a zeolite 5A column saturated with CO2. An asymmetry between the adsorption and desorption profiles is readily apparent. A linear relationship between the CO2 condensed phase concentration and square root of time was observed.

Adsorption of C7 hydrocarbons on biporous SBA-15 mesoporous silica.

In our recent studies (Vinh-Thang, H.; Huang, Q.; Eic, M.; Trong-On, D.; Kaliaguine, S. Langmuir 2005, 21, 2051-2057; Vinh-Thang, H.; Huang, Q.; Eic, M.; Trong-On, D.; Kaliaguine, S. Stud. Surf. Sci. Catal. 2005, in press), a series of synthesized SBA-15 materials were characterized using nitrogen adsorption/desorption isotherms at 77 K and SEM images. In the present paper, four of them (MMS-1-RT, MMS-1-60, MMS-1-80, and MMS-5-80) were further investigated with regard to their equilibrium characteristics using n-heptane and toluene as sorbates by the standard gravimetric technique. SBA-15 materials proved to have a broad pore size distribution within the micropore/small-mesopore range in the walls of their main mesoporous channels. The adsorption capacities for toluene were found to be higher than for n-heptane. The isosteric heats of adsorption, estimated by the Clausius-Clapeyron equation, are also higher for toluene compared to n-heptane. They were found to depend on framework microporosity of the relevant SBA-15 samples. The isosteric heats of adsorption for all sorbates decrease with increased loading and approach the heats of evaporation of the respective sorbate. The adsorption capacities of SBA-15 samples are significantly higher than those of silicalite, i.e., the MFI zeolite silica analogue. In contrast to that, the isosteric heats of adsorption in the mesopore channels of SBA-15 were found to be much smaller. This result also suggests that SBA-15 can potentially be a good candidate for separation of C(7) hydrocarbons.

Structure and diffusion characterization of SBA-15 materials.

In situ formation of the micro- and mesoporous structures of SBA-15 materials was investigated. It was found that the structure is significantly different from that for cylindrical or hexagonal pores, which suggests that the SBA-15 is more complex than an array of hexagonally ordered channels. Nitrogen adsorption isotherms at 77 K provided evidence that large (primary) mesopores are accompanied by a certain amount of significantly smaller pores with a broad distribution in the micropore/small-mesopore range within the mesoporous walls of main channels. It was found that the microporosity can be controlled by the time of heating as well as the synthesis temperature. The diffusion properties of n-heptane as a probe molecule in four selected SBA-15 samples with different micropore volumes were studied by the standard zero length column technique and related to their structural characteristics. The results have shown that the diffusion process involving n-heptane at a low concentration level takes place inside the walls of main mesoporous channels and depends on the relative content of micropores. In the samples that have a relatively high content of micropores, n-heptane diffusivities are relatively low, their activation energies are high, and the process is similar to diffusion in typical microporous adsorbents, like zeolites. As the micropore content is decreased, diffusion becomes more and more controlled by secondary mesopores of the intrawall pore structure, rendering diffusion faster and activation energies lower.