Facile approaches for determination of Bromhexine Hydrochloride and its active metabolite Ambroxol Hydrochloride using Eosin Y.

New validated Spectroscopic methods were developed to assay Bromhexine Hydrochloride and its active metabolite Ambroxol Hydrochloride separately in pure form and pharmaceutical formulations. The spectrophotometric assay (method I) shows complex formation between each of the drugs and Eosin Y at 540nm at pH 3.6 and 3.4mL of 4×10-4M Eosin for Bromhexine and Ambroxol. The Spectrofluorimetric assay (method II) depends on quenching eosin native fluorescence by the studied drugs, which measured at 540nm after excitation at 302nm. The spectrophotometric absorbance-concentration plot is rectilinear over the ranges (1.0-5.0) and (1.0-10.0) µg/mL for bromhexine and ambroxol with LOD of 0.31 and 0.14µg/mL and LOQ of 0.94 and 0.42µg/mL for the two drugs respectively. The fluorometric-concentration plot is linear along the range (1.0-5.0) µg/mL and (1-10) µg/mL for the two drugs respectively with LOD of 0.13µg/mL and 0.22µg/mL and LOQ of 0.4µg/mL and 0.65µg/mL for the two drugs, respectively. Developed assays have been validated in agreement with ICH recommendations and they were used in the analysis of commercial drug formulations containing the two mucolytic drugs and the results were matching with those obtained by the comparison method.

Highly sensitive spectrofluorimetric method for rapid determination of orciprenaline in biological fluids and pharmaceuticals.

Orciprenaline sulphate (ORP) is a direct-acting sympathomimetic with mainly beta-adrenoceptor stimulant activity. It is used as a bronchodilator in the management of reversible airway obstruction. For the first time, a rapid highly sensitive spectrofluorimetric method is described that is relied on measuring the fluorescence spectra of ORP at acidic pH and without addition of any chemical reagents. The relative fluorescence intensity was measured at 310 nm and after excitation at 224 nm. ORP native fluorescence was calibrated in both water and acetonitrile as diluting solvents. The method was designed to estimate the drug in miscellaneous matrices with high accuracy and precision. Linear ranges of calibration curves were 30.0-400.0 ng/ml and 10.0-240.0 ng/ml in water and acetonitrile, respectively. The detection limits were calculated and reached as low as 3.3 and 3.1 ng/ml, respectively, representing the ultra-sensitivity of the proposed method. This result permitted application of this method for spiked human plasma and urine and was used as a preliminary investigation with good percentage recovery (89.4-106.8%). The application was further extended to analyse ORP in its pharmaceutical formulations. The method was validated in compliance with International Council of Harmonization (ICH) Guidelines.

A versatile HPLC method with an isocratic single mobile phase system for simultaneous determination of anti-glaucoma formulations containing timolol.

Timolol is a non-cardioselective beta blocker and has different combined ophthalmic dosage forms for treatment of glaucoma. This research introduce an HPLC method for the separation of three drugs used in combination with timolol simultaneously by applying isocratic mobile phase system in a single run and the same detection wavelength with short time. The drugs included in the separation procedures are; dorzolamide, brinzolamide, and brimonidine. The HPLC method was carried out through a single mobile phase system, which contains acetonitrile: 0.05M phosphate buffer at the ratio of 30:70, respectively at pH 3.5 and wavelength of 220nm. The method, regarding its simplicity allows determination of the studied drugs simultaneously using single run in about 8minutes. The method was rectilinear in the ranges of concentration: 1.25-25µg/mL for timolol, 4-80µg/mL for dorzolamide, 5-50µg/mL for brinzolamide and 2-20µg/mL for brimonidine. Different factors affecting the separation are thoroughly studied. The developed method was validated based on the official guidelines and the results were compared statistically with previously published methods and showed non-significant difference.

Micelle-enhanced spectrofluorimetric method for determination of cyproheptadine hydrochloride in tablets: application to in-vitro drug release and content uniformity test.

A highly sensitive and simple spectrofluorimetric method was developed for the determination of cyproheptadine hydrochloride (CYP) in its pharmaceutical formulations. The proposed method is based on the investigation of the fluorescence spectral behaviour of CYP in a sodium dodecyl sulphate (SDS) micellar system. In aqueous solution, the fluorescence intensity of CYP was greatly enhanced (150 %) in the presence of SDS. The fluorescence intensity was measured at 410 nm after excitation at 280 nm. The fluorescence-concentration plot was rectilinear over the range 0.2-2.0 µg/mL, with lower detection limit of 0.06 µg/mL. The proposed method was successfully applied to the assay of commercial tablets as well as content uniformity testing. The application of the proposed method was extended to test the in-vitro drug release of CYP tablets, according to USP guidelines. The results were statistically compared with those obtained by official USP method and were found to be in good agreement.

Determination of oxybutynin in pharmaceuticals via reaction with mixed acids anhydrides: application to content uniformity testing.

Sensitive and simple spectrophotometric (Method I) and spectrofluorimetric (Method II) methods were developed and validated for the determination of oxybutynin HCl (OXB) in its dosage forms. The method was based on the reaction of OXB with malonic acid anhydride in acetic acid anhydride to form a highly yellow colored product that was measured at 375 nm spectrophotometrically. The same reaction product exihibits strong fluorescence that was measured at 440 nm after excitation at 390 nm. The factors affecting formation and stability of the reaction product were carefully studied and optimized, and the reaction mechanism was postulated. The absorbance-concentration plot is rectilinear over the range 4-40 µg/mL with LOD of 1.12 µg/mL and LOQ of 3.39 µg/mL. The fluorescence-concentration plot is rectilinear over the range 0.5-6 µg/mL with LOD of 0.11 µg/mL and LOQ of 0.33 µg/mL. The method was applied to the analysis of commercial tablets Detronin® and Uripan®. Statistical comparison of the results with those of the reference method revealed good agreement and proved that there were no significant difference in the accuracy and precision between the two methods respectively. The study was extended to content uniformity testing.

Spectrofluorimetric determination of paroxetine HCl in pharmaceuticals via derivatization with 4-chloro-7- nitrobenzo-2-oxa-1,3-diazole (NBD-Cl).

A sensitive and simple spectrofluorimetric method has been developed and validated for the determination of the antidepressant paroxetine HCl (PXT) in its dosage forms. The method was based on coupling reaction of PXT with 4-chloro-7-nitrobenzo-2- oxa-1,3-diazole (NBD-Cl) in an alkaline medium (pH 8) to form a highly fluorescent derivative that was measured at 530 nm after excitation at 460 nm. The factors affecting the formation and stability of the reaction product were carefully studied and optimized. The fluorescence-concentration plot is rectilinear over the range 0.2-6 µg/mL with LOD of 0.08 µg/mL and LOQ of 0.24 µg/mL respectively. The method was applied to the analysis of commercial tablets and the results were in good agreement with those obtained using the reference method. The mean percentage recoveries for paxetin and xandol tablets were 101.27 ± 1.79 and 101.33 ± 1.19 respectively. A proposal of the reaction pathway was postulated.

Simultaneous Determination of Cromolyn Sodium Combined Dosage Forms Using Isocratic HPLC Method.

A simple and selective reversed-phase high-performance liquid chromatography method was developed for the estimation of cromolyn sodium (CRM) with either oxymetazoline hydrochloride (OMZ) or xylometazoline hydrochloride (XMZ) in their binary mixtures. The method is based on the simultaneous separation of each drug in a reversed-phase Waters symmetry® C18 column (250 mm × 4.6 mm intradermally, 5-µm particle size) at 25°C. Elution was performed with a mobile phase consisting of methanol : 0.1 M phosphate buffer (60:40, v/v, pH 4.0). Quantitation was achieved with ultraviolet detection at 220 nm. The method could determine the three drugs, with linearity, in the range of 2.0-100.0 µg/mL for CRM and 0.8-8.0 µg/mL for OMZ and for XMZ. Aspirin was used as internal standard. Optimization of the separation in terms of mobile phase composition is critical to the method development, which is discussed in detail. The suggested procedure was successfully applied to the analysis of the studied drugs in their nasal preparations. Statistical evaluation of the data obtained by the proposed and comparison methods revealed good accuracy of the proposed method.

Spectrophotometric and Spectrofluorimetric Methods for the Determination of Dothiepin Hydrochloride in its Pure and Dosage Forms using Eosin.

Spectrophotometric and spectrofluorimetric methods were developed for the determination of dothiepin hydrochloride (DOP) in different dosage forms. The spectrophotometric method (Method I) is based on formation of a binary complex with eosin at 540 nm in acetate buffer of pH3.7. The absorbance-concentration plot is rectilinear over the range 1-10 µg/mL with LOD of 0.18 µg/mL and LOQ of 0.54 µg/mL. The spectroflurimetric method (Method II) is based on the quantitative quenching effect of Dothiepin on the native fluorescence of eosin at the same pH. The quenching of the fluorescence of eosin was measured at 543 nm after excitation at 304 nm. The fluorescence-concentration plot is rectilinear over the range 0.3-8 µg/ mL with LOD of 0.11 µg/mL and LOQ of 0.34 µg/mL. The proposed methods were successfully applied to the analysis of commercial tablets and capsules containing the drug. Statistical comparison of the results with those of the reference method revealed good agreement and proved that there were no significant differences in the accuracy and precision between the two methods respectively.