ABSTRACT
OBJECTIVES: To evaluate the effect of proanthocyanidin-functionalized hydroxyapatite nanoparticles (nHAp_PA) used as pretreatment at different concentrations on the microtensile bond strength (µTBS) and endogenous enzymatic activity (MMPs) on pH-cycled dentin after 24 h and 6 months of artificial aging. MATERIALS AND METHODS: Fifty human sound dentin blocks were randomly assigned to 5 groups (n = 10): (i) negative control (no treatment); (ii) positive control (pH-cycling); (iii) pH-cycling + 2% nHAp_PA for 60s; (iv) pH-cycling + 6.5% nHAp_PA for 60s; (v) pH-cycling + 15% nHAp_PA for 60s. A self-etch adhesive was used for bonding procedures before resin composite build-ups. Specimens were tested with the µTBS test after 24 h and 6 months of laboratory storage. The proteolytic activity in each group was evaluated with gelatin zymography and in situ zymography. Data were statistically analyzed (p < 0.05). RESULTS: At 24 h, the µTBS of the experimental groups were significantly higher than the controls (p ≤ 0.001), and no differences were observed between different concentrations (p > 0.05). Artificial aging significantly decreased bond strength in all groups (p ≤ 0.008); however, nHAp_PA 2% still yielded higher bonding values than controls (p ≤ 0.007). The groups pretreated with nHAp_PA exhibited lower MMP-9 and MMP-2 activities compared to the positive control group and almost the same enzymatic activity as the negative control group. In situ zymography showed that after 6 months of aging, nHAp_PA 2% and nHAp_PA 6,5% decreased enzymatic activity as well as the negative control. CONCLUSIONS: Dentin pretreatment with nHAp_PA increased the bonding performance of a self-etch adhesive and decreased MMP-2 and MMP-9 activities after 6 months.
Subject(s)
Dental Bonding , Durapatite , Materials Testing , Nanoparticles , Proanthocyanidins , Tensile Strength , Proanthocyanidins/chemistry , Proanthocyanidins/pharmacology , Durapatite/chemistry , Nanoparticles/chemistry , Humans , Dental Bonding/methods , Dentin-Bonding Agents/chemistry , Dentin , Surface Properties , In Vitro Techniques , Dental Stress Analysis , Hydrogen-Ion Concentration , Composite Resins/chemistry , Random AllocationABSTRACT
OBJECTIVES: This study compared the chemical composition, microstructural, and mechanical properties of human and bovine dentin subjected to a demineralization/remineralization process. MATERIALS AND METHODS: Human and bovine incisors were sectioned to obtain 120 coronal dentin beams (6 × 1 × 1 mm3) that were randomly allocated into 4 subgroups (n = 15) according to the time of treatment (sound, pH-cycling for 3, 7, and 14 days). Three-point bending mechanical test, attenuated total reflectance-Fourier transform infrared (ATR-FTIR), thermogravimetric (TG), and X-ray diffraction (XRD) techniques were employed to characterize the dentin samples. RESULTS: Regarding chemical composition at the molecular level, bovine sound dentin showed significantly lower values in organic and inorganic content (collagen cross-linking, CO3/amide I, and CO3/PO4; p = 0.002, p = 0.026, and p = 0.002, respectively) compared to humans. Employing XRD analyses, a higher mineral crystallinity in human dentin than in bovines at 7 and 14 days (p = 0.003 and p = 0.009, respectively) was observed. At the end of the pH-cycling, CI (ATR-FTIR) and CO3/PO4 ratios (ATR-FTIR) increased, while CO3/amide I (ATR-FTIR), PO4/amide I (ATR-FTIR), and %mineral (TG) ratios decreased. The extension by compression values increased over exposure time with significant differences between dentin types (p < 0.001, in all cases), reaching higher values in bovine dentin. However, flexural strength (MPa) did not show differences between groups. We also observed the correlation between compositional variables (i.e., PO4/amide I, CI, and %mineral) and the extension by compression. CONCLUSIONS: Human and bovine dentin are different in terms of microstructure, chemical composition, mechanical strength, and in their response to the demineralization/remineralization process by pH-cycling. CLINICAL RELEVANCE: These dissimilarities may constitute a potential limitation when replacing human teeth with bovines in in vitro studies.
Subject(s)
Dentin , Incisor , Animals , Cattle , Humans , MineralsABSTRACT
The development of new biocompatible and eco-friendly materials is essential for the future of dental practice, especially for the management of dental caries. In this study, a novel and simple method was applied for the green synthesis of silver nanoparticles (AgNPs) from the aqueous extract of Camellia sinensis (WT) and functionalized with chitosan (CHS) and NaF. The effects of WT_AgNPs application on demineralized dentin were evaluated for potential dental applications. The WT_AgNPs showed molecular groups related to organic compounds, potentially acting as reducing and capping agents. All AgNPs presented spherical shapes with crystal sizes of approximately 20 nm. Forty human molars were assigned to control: sound (SD) and demineralised dentine (DD), and experimental groups: WT_AgNPs, WT_AgNPs_NaF, and WT_AgNPs_CHS. Then, the NPs were applied to DD to evaluate the chemical, crystallographic, and microstructural characteristics of treated-dentine. In addition, a three-point bending test was employed to assess mechanical response. The application of WT_AgNPs indicated a higher mineralisation degree and crystallites sizes of hydroxyapatite than the DD group. SEM images showed that WT_AgNPs presented different degrees of aggregation and distribution patterns. The dentine flexural strength was significantly increased in all WT_AgNPs. The application of WT_AgNPs demonstrated remineralising and strengthening potential on demineralised dentine.
Subject(s)
Camellia sinensis , Chitosan , Fluorides , Green Chemistry Technology , Metal Nanoparticles , Silver , Chitosan/chemistry , Silver/chemistry , Metal Nanoparticles/chemistry , Camellia sinensis/chemistry , Green Chemistry Technology/methods , Fluorides/chemistry , Humans , Dentin/chemistry , Plant Extracts/chemistryABSTRACT
OBJECTIVE: (1) to determine the effects of the silver diamine fluoride (SDF) and sodium fluoride (NaF) in demineralized dentin exposed to an acid challenge by pH-cycling, (2) to evaluate the remineralizing capacity of SDF/NaF products based on the physicochemical and mechanical properties of the treated dentin surfaces. METHODOLOGY: In total, 57 human molars were evaluated in different stages of the experimental period: sound dentin - negative control (Stage 1), demineralized dentin - positive control (Stage 2), and dentin treated with SDF/NaF products + pH-c (Stage 3). Several commercial products were used for the SDF treatment: Saforide, RivaStar, and Cariestop. The mineral composition and crystalline and morphological characteristics of the dentin samples from each experimental stage were evaluated by infrared spectroscopy (ATR-FTIR), X-ray diffraction, and electron microscopy (SEM-EDX) analytical techniques. Moreover, the mechanical response of the samples was analyzed by means of the three-point bending test. Statistics were estimated for ATR-FTIR variables by Wilcoxon test, while the mechanical data analyses were performed using Kruskal-Wallis and Mann Whitney U tests. RESULTS: Regarding the chemical composition, we observed a higher mineral/organic content in the SDF/NaF treated dentin + pH-c groups (Stage 3) than in the positive control groups (Saforide p=0.03; Cariestop p=0.008; RivaStar p=0.013; NaF p=0.04). The XRD results showed that the crystallite size of hydroxyapatite increased in the SDF/NaF treated dentin + pH-c groups (between +63% in RivaStar to +108% in Saforide), regarding the positive control. SEM images showed that after application of the SDF/NaF products a crystalline precipitate formed on the dentin surface and partially filled the dentin tubules. The flexural strength (MPa) values were higher in the dentin treated with SDF/NaF + pH-c (Stage 3) compared to the positive control groups (Saforide p=0.002; Cariestop p=0.04; RivaStar p=0.04; NaF p=0.02). CONCLUSIONS: The application of SDF/NaF affected the physicochemical and mechanical properties of demineralized dentin. According to the results, the use of SFD/NaF had a remineralizing effect on the dentin surface even under acid challenge.
Subject(s)
Dentin , Fluorides, Topical , Humans , Fluorides, Topical/pharmacology , Fluorides, Topical/chemistry , Sodium Fluoride/pharmacology , Durapatite/pharmacology , Hydrogen-Ion ConcentrationABSTRACT
OBJECTIVE: This study evaluated the potential combined effects of nanohydroxyapatite and proanthocyanidin on the remineralization and collagen stabilization of demineralized dentin. METHODS: Seventy-five coronal dentin beams (6 × 1 × 1 mm3) were randomly allocated into five experimental groups (n = 15): Sound (no treatment), Control (pH-cycling), nHAp (nanohydroxyapatite), nHAp_PA (Proanthocyanidin-functionalized nanohydroxyapatite), and PA (proanthocyanidin) treatments. The sound group (negative control) were immersed in distilled water over the experimental period. The remaining groups were submitted to a pH-cycling process for 14 days. Following the de-re mineralization process, specimens corresponding to the control group (positive control) were immersed in distilled water whereas the test groups were immersed in 1 mL of respective solution treatment (nHAp, nHAp_PA, or PA) for 1 min. The dentin samples were analyzed to determine their chemical composition (ATR-FTIR and Thermogravimetric) and mineralogical (XRD) characteristics as well as their mechanical response, obtained by three-point bending test. RESULTS: Higher phosphate content (v4 PO4: ATR-FTIR) and amount of mineral (XRD) was observed in the nHAp_PA group. Furthermore, a larger induction of collagen cross-links (ATR-FTIR) and %Organic Matter (TGA) would indicate the PA incorporation and the achievement of dentin matrix stability. These effects on dentin properties were related to increasing flexural strength (MPa), demonstrating that 15% w/v nHAp_PA treatment improved the mechanical properties of the samples. SIGNIFICANCE: nHAp_PA shows significant potential for promoting remineralization while improving collagen stability into demineralized dentin in a clinically feasible period of 1 min.
Subject(s)
Nanoparticles , Proanthocyanidins , Collagen , Dentin , Durapatite , Proanthocyanidins/pharmacologyABSTRACT
Abstract Objective (1) to determine the effects of the silver diamine fluoride (SDF) and sodium fluoride (NaF) in demineralized dentin exposed to an acid challenge by pH-cycling, (2) to evaluate the remineralizing capacity of SDF/NaF products based on the physicochemical and mechanical properties of the treated dentin surfaces. Methodology In total, 57 human molars were evaluated in different stages of the experimental period: sound dentin - negative control (Stage 1), demineralized dentin - positive control (Stage 2), and dentin treated with SDF/NaF products + pH-c (Stage 3). Several commercial products were used for the SDF treatment: Saforide, RivaStar, and Cariestop. The mineral composition and crystalline and morphological characteristics of the dentin samples from each experimental stage were evaluated by infrared spectroscopy (ATR-FTIR), X-ray diffraction, and electron microscopy (SEM-EDX) analytical techniques. Moreover, the mechanical response of the samples was analyzed by means of the three-point bending test. Statistics were estimated for ATR-FTIR variables by Wilcoxon test, while the mechanical data analyses were performed using Kruskal-Wallis and Mann Whitney U tests. Results Regarding the chemical composition, we observed a higher mineral/organic content in the SDF/NaF treated dentin + pH-c groups (Stage 3) than in the positive control groups (Saforide p=0.03; Cariestop p=0.008; RivaStar p=0.013; NaF p=0.04). The XRD results showed that the crystallite size of hydroxyapatite increased in the SDF/NaF treated dentin + pH-c groups (between +63% in RivaStar to +108% in Saforide), regarding the positive control. SEM images showed that after application of the SDF/NaF products a crystalline precipitate formed on the dentin surface and partially filled the dentin tubules. The flexural strength (MPa) values were higher in the dentin treated with SDF/NaF + pH-c (Stage 3) compared to the positive control groups (Saforide p=0.002; Cariestop p=0.04; RivaStar p=0.04; NaF p=0.02). Conclusions The application of SDF/NaF affected the physicochemical and mechanical properties of demineralized dentin. According to the results, the use of SFD/NaF had a remineralizing effect on the dentin surface even under acid challenge.