ABSTRACT
BACKGROUND: The oral ecosystem conditions dental health, and is known to be positively modified by oral hygiene which cannot always be performed between meals, especially outside home. It is therefore important to identify the practices to be adopted to influence the oral environment in an anticariogenic direction. Milk and cheese are considered functional foods and have a role on oral health. There are several mechanisms by which cheese exerts its beneficial effects on teeth. The aim of the present study was to examine whether short term consumption of hard cheese would affect the oral pH and microbial flora of healthy adults modifying ecological oral environment. The Next Generation Sequencing (NGS) approach was applied to study the effect of Italian Grana Padano (GP), as a prototype of typical hard cheese, on the oral microbiota composition. Finally, we explored Streptococcus mutans/sanguinis ratio as a marker of protective biofilm composition. METHODS: Nine oral-healthy adults were instructed to eat 25 gr of GP cheese for 5 consecutive days. Three time points were chosen for supragingival samples collection and pH measurement. 16S rRNA-gene sequences were obtained both from oral samples and GP cheese using the MiSeq platform and analyzed against the expanded Human Oral Microbiome Database (eHOMD). ProgPerm was used to perform statistical analyses to investigate strain differential representation after cheese consumption. RESULTS: Taxonomic analyses of the oral microbiota revealed that Firmicutes was the most abundant phylum, followed by Proteobacteria and Actinobacteria. GP cheese significantly modifies oral pH, causing a shift toward basic conditions which are kept for a few hours. The Streptococcus mutans/Streptococcus sanguinis ratio lowers in the last observed timepoint. CONCLUSION: Our results reveal that a portion of GP cheese eaten after dinner provides important micronutrients (i.e. calcium, vitamins and some aminoacids such as arginine) and changes oral pH toward basic conditions, resulting in a light modification of the oral microbiome towards the reduction of the overall amount of acidophilic bacteria. Furthermore, the S. mutans/S. sanguinis ratio is reduced, contributing to obtain a more protecting environment towards caries establishment and evolution.
Subject(s)
Cheese , Dental Caries , Microbiota , Adult , Cheese/microbiology , Humans , Hydrogen-Ion Concentration , Microbiota/genetics , Prospective Studies , RNA, Ribosomal, 16S/genetics , Streptococcus mutans/geneticsABSTRACT
Bisphosphonates (BPs) represent the first-line treatment for a wide array of bone disorders. Despite their well-known action on osteoclasts, the effects they induce on osteoblasts are still unclear. In order to shed light on this aspect we evaluated the impact of two nitrogen containing bisphosphonates, Alendronate (ALN) and Zoledronate (ZOL), on human primary pre-osteoblasts. At first, we showed an inhibitory effect on cell viability and alkaline phosphatase activity starting from µM concentrations of both drugs. In addition, an inhibitory trend on mineralized nodules deposition was observed. Then low doses of both ALN and ZOL rapidly increased the release of the pro-inflammatory mediators TNFα and IL-1ß, while increased DKK-1 and Sclerostin, both inhibitors of osteoblastogenesis. Finally, ALN and 10-7M ZOL decreased the expression of type I Collagen and Osteopontin, while both drugs slightly stimulated SPARC production. With these results, we would like to suggest a direct inhibitory action on bone-forming cells by nitrogen containing bisphosphonates.
Subject(s)
Alendronate/pharmacology , Bone Density Conservation Agents/pharmacology , Osteoblasts/metabolism , Zoledronic Acid/pharmacology , Alendronate/therapeutic use , Alkaline Phosphatase/antagonists & inhibitors , Biomarkers/metabolism , Bone Density Conservation Agents/therapeutic use , Bone Diseases/drug therapy , Calcification, Physiologic/drug effects , Cell Differentiation/drug effects , Cell Survival/drug effects , Cells, Cultured , Collagen Type I/antagonists & inhibitors , Cytokines/metabolism , Humans , Osteoblasts/cytology , Osteoblasts/drug effects , Osteopontin/antagonists & inhibitors , Zoledronic Acid/therapeutic useABSTRACT
OBJECTIVES: The aim of this systematic review of the literature is to describe treatment options for bilateral coronoid process hyperplasia in pediatric patients, to describe etiologic and diagnostic correlations with the treatment, and to evaluate long-term follow-up treatment outcomes. METHODS: A systematic revision of the literature was performed in the Medline, PubMed, Cochrane library, and Embase database up to December 5, 2017. Predetermined Medical Subject Heading keywords were used: "bilateral" or "monolateral" and "coronoid" or "coronoid process" and "hyperplasia" and "temporomandibular joint" or "tmj" and "ankylosis" or "trismus" and "treatment." Results were recorded following PRISMA guidelines. RESULTS: The systematic research produced 1459 results excluding duplicates. Two additional studies from "Grey literature" were also considered. After application of inclusion and exclusion criteria, 38 articles were selected for a qualitative synthesis. Data regarding sex and age of presentation were collected and summarized in a study flow diagram. CONCLUSION: It is possible to conclude that early diagnosis is fundamental to restore stomatognathic multifunction. There is lack of longitudinal studies presenting long-term follow-up to determine treatment stability. Coronoidectomy might be considered gold standard treatment for this pathologic condition.
Subject(s)
Mandible/pathology , Temporomandibular Joint Disorders/surgery , Temporomandibular Joint/pathology , Child , Diagnosis, Differential , Female , Humans , Hyperplasia/complications , Hyperplasia/diagnosis , Hyperplasia/surgery , Male , Mandible/surgery , Mandibular Osteotomy , Temporomandibular Joint/surgery , Temporomandibular Joint Disorders/diagnosis , Tooth Ankylosis/etiology , Treatment Outcome , Trismus/etiologyABSTRACT
OBJECTIVE: This article describes a virtual protocol designed to optimize surgical orthodontic diagnosis and treatment plan. METHODS: A total of 15 patients undergoing orthodontic-surgical treatment have been analyzed with a presurgical virtual three-dimensional (3D) treatment planning, which involves 9 steps. All the patients have been treated with the use of occlusal splint guides projected on the basis of the surgical and orthodontic visualized treatment objective . RESULTS: In all the analyzed patients, a precise and optimal orthodontic presurgical preparation has been obtained. CONCLUSIONS: The 3D analysis seems more precise to interpret than two-dimensional; it provides information and images of craniofacial structures free from perspective distortion and it reduces the steps of the presurgical diagnosis. The simplicity of the protocol described in this paper makes possible to apply it in everyday practice.The study described here allows high-precision planning of orthodontic-surgical therapy and optimization of each treatment phase, with consequent advantages in clinical practice: a more accurate orthognathic surgery with predictable results.
Subject(s)
Imaging, Three-Dimensional , Malocclusion, Angle Class III/diagnostic imaging , Malocclusion, Angle Class III/surgery , Patient Care Planning , Preoperative Care/methods , Surgery, Computer-Assisted , User-Computer Interface , Cephalometry , Computer Simulation , Cone-Beam Computed Tomography , Esthetics, Dental , Humans , Image Interpretation, Computer-Assisted , Occlusal Splints , Orthognathic Surgical Procedures , Radiography, Dental, DigitalABSTRACT
Obstructive sleep apnea syndrome (OSAS) represents a frequent and common respiratory disease characterized by repeated episodes of complete and/or partial obstruction of upper airways during sleep, normally associated with reduction of oxygen saturation in blood. The oral appliances (OAs) are considered to be an effective treatment modality thanks to the upper airway enlargement. Lateral cephalometry has been used for the 2-dimensional evaluation of upper airway form with several limits. We obtained an accurate 3-dimensional (3D) volume analyses with cone beam computed tomography (CBCT) scans to confirm the effects of OA on the upper airway in patients with OSAS. Ten Italian patients with moderate or severe OSA (3 males and 7 females, 53.4 ± 11.3 years of age, and BMI 24.5 ± 2.7), who cannot tolerate continuous positive air pressure therapy and rejected a surgical approach, were treated with non-adjustable customized OAs and evaluated with CBCT and polysomnography. Upper airway form was examined in the presence and absence of OA and the volume was measured and compared in 2 different areas. Specific planes have been considered to match the data and calculate the benefit obtained with therapy. Nine out of ten patients showed an improvement of total upper airway volume and an improvement in apnea-hypopnea index. Volume increased both in the posterior soft palate region and in the posterior tongue region. In the inferior area, we observed greater differences. 3D image reconstruction accurately confirmed morphological changes in the upper airway during OA therapy. The use of this 3D evaluation is expected to improve the results of OA therapy in the future.
Subject(s)
Cone-Beam Computed Tomography/methods , Imaging, Three-Dimensional/methods , Mandibular Advancement/instrumentation , Orthodontic Appliances, Removable , Sleep Apnea, Obstructive/diagnostic imaging , Sleep Apnea, Obstructive/therapy , Adult , Aged , Cephalometry , Female , Humans , Male , Middle Aged , Palate, Soft/surgery , Polysomnography , Tongue/surgery , Treatment OutcomeABSTRACT
AIM: This article describes an experimental protocol designed to optimize surgical orthodontic diagnosis and treatment plan. MATERIALS AND METHODS: In this study, 15 patients undergoing orthodontic-surgical treatment have been analyzed.The superimposition between models and respective presurgical setup for each group was performed. A best-fit algorithm was used to find the position of the arches in space for which the sum of the discrepancies was the shortest.A punctual variation colorimetric map indicating percentages of areas subjected to different discrepancies was used to evaluate the degree of congruence between the 2 models.Furthermore, for each arch the software provided metric values of maximum positive deviation, maximum negative deviation, mean deviation, and standard deviation that characterize the points compared in the superimposition. RESULTS: For all the considered patients, the orthodontic preparation for surgery was obtained according to the splint guides and the orthodontic planning. CONCLUSION: The protocol described here allows high-precision planning of orthodontic-surgical therapy optimization of each treatment phase, with consequent advantages in clinical practice.
Subject(s)
Algorithms , Cone-Beam Computed Tomography/methods , Imaging, Three-Dimensional/methods , Oral Surgical Procedures , Patient Care Planning , Preoperative Care/methods , HumansABSTRACT
Analysis of the frontal sinus is an important tool in personal identification. Cone beam-computed tomography (CBCT) is also progressively replacing conventional radiography and multi-slice computed tomography (MSCT) in human identification. The aim of this study is to develop a reproducible technique and measurements from 3D reconstructions obtained with CBCT, for use in human identification. CBCT from 150 patients (91 female, 59 male), aged between 15 and 78 years, was analysed with the specific software program MIMICS 11.11 (Materialise N.V., Leuven, Belgium). Corresponding 3D volumes were generated and maximal dimensions along 3 directions (x, y, z), X M, Y M, Z M (in mm), total volume area (in mm(3)), V t, and total surface (in mm(2)), S t, were calculated. Correlation analysis showed that sinus surfaces were strongly correlated with their volume (r = 0.976). Frontal sinuses were separate in 21 subjects (14 %), fused in 67 (44.6 %) and found on only one side (unilateral) in 9 (6 %). A Prominent Middle of Fused Sinus (PMS) was found in 53 subjects (35.3 %). The intra- (0.963-0.999) and inter-observer variability (0.973-0.999) showed a great agreement and a substantial homogeneity of evaluation.
Subject(s)
Cone-Beam Computed Tomography , Forensic Anthropology/methods , Frontal Sinus/diagnostic imaging , Adolescent , Adult , Aged , Female , Humans , Male , Middle Aged , Observer Variation , Reproducibility of ResultsABSTRACT
We report here the case of orthodontic nonsurgical treatment in a patient with Binder syndrome. This rare syndrome (<1/10,000) is a deforming alteration of the middle third of the face, also known as maxillonasal dysplasia/dysostosis. The therapeutic approach often undertaken is an orthodontic-surgical protocol, which includes several invasive interventions such as LeFort I or II. In this patient and early diagnosis made it possible to intervene on an orthodontic level only, thus avoiding highly invasive surgical procedures (as of a 5-year follow-up).
Subject(s)
Maxillofacial Abnormalities/diagnosis , Maxillofacial Abnormalities/therapy , Orthodontics, Corrective/methods , Child , Diagnosis, Differential , Early Diagnosis , Female , HumansABSTRACT
OBJECTIVE: Foreign body aspiration is a possible complication of dental treatment that may result in a life-threatening situation. The foreign body is often spontaneously ejected from the airway, but in other cases, surgical intervention is needed. Prevention, diagnostic procedures, treatment and complications are discussed. MATERIALS AND METHODS: Three cases of aspiration of dental instruments are described: the piece was localised in the right main bronchus in two cases and in the left main bronchus in one case. RESULTS: All three cases underwent surgery (resection and bronchoscopy); in one case, the surgical attempt failed, and the foreign body was not located by radiography; it was assumed to have been expelled spontaneously. CONCLUSION: The management of dental materials and instruments requires particular care, especially if the patient is supine or semi-recumbent. The dentist must be able to manage emergency situations in which patients accidentally inspire or swallow dental instruments or materials during treatment. Preventive techniques must be put in place because these incidents are preventable if the correct precautions are taken.
Subject(s)
Accidents , Aspirations, Psychological , Dental Care/adverse effects , Foreign Bodies/diagnosis , Foreign Bodies/surgery , Aged, 80 and over , Dental Equipment , Dental Materials , Foreign Bodies/diagnostic imaging , Foreign Bodies/prevention & control , Humans , Male , Middle Aged , Radiography, ThoracicABSTRACT
The precision of presurgical orthodontic diagnostic protocol plays a key role for the success of orthognathic surgery.Recently, the introduction of cone beam computed tomography and the development of digital technologies led to the possibility to create new virtual protocols of diagnostic protocol.The purposes of this study were to describe the virtual presurgical orthodontic diagnostic protocol experimented by the Orthodontics Department of the University of Milan and to assess its reliability by comparing it with the nonvirtual protocol.The study sample was a group of 18 adult patients who required surgical correction of skeletal asymmetric class II or III malocclusion: 9 of them were subjected to the virtual diagnostic protocol, whereas the other 9 were subjected to the traditional one. A comparison between the 2 methods was carried out by evaluating the degree of the discrepancy between setup and presurgical models in both groups. The values of maximum positive deviation, maximum negative deviation, mean deviation, and standard deviation that characterize the points of the superimpositions were considered.An optimal superimposition (>75%) between the scanning of the setup and presurgical models was obtained for all subjects except for 2 patients with asymmetry. The analysis of the punctual deviation variables did not show statistically significant differences between the techniques.The study suggested a high precision for both diagnostic protocols, and the reliability of the 2 methods is comparable. However, the virtual protocol has several advantages such as quantity of information obtainable, repeatability, and speed of execution.
Subject(s)
Cone-Beam Computed Tomography , Imaging, Three-Dimensional/methods , Malocclusion, Angle Class III/diagnostic imaging , Malocclusion, Angle Class II/diagnostic imaging , Models, Dental , Orthodontics, Corrective , Patient Care Planning , Adult , Cephalometry/methods , Female , Humans , Male , Malocclusion, Angle Class II/surgery , Malocclusion, Angle Class III/surgery , Orthognathic Surgical Procedures/methods , Reproducibility of ResultsABSTRACT
PURPOSE: The aim of this study is to provide new molecular approaches to the children with obstructive sleep apnea syndrome by evaluating the possible involvement of the PHOX2B gene, notoriously associated to congenital central hypoventilation syndrome (CCHS), in Class III malocclusion. METHODS: Fifty subjects with Class III malocclusion, aged from 8 to 14 years, and with history of sleep apneic episodes, and 20 age-matched controls were submitted to genomic DNA examination from oral cells to specifically analyze the PHOX2B genotype. RESULTS: Point "silent" mutations affecting different nucleotides of the PHOX2B gene were observed in 32 % of patients with Class III malocclusion and never in controls (0 %). CONCLUSION: The genetic data obtained in this study in children with Class III malocclusion and sleep-related breathing disorders provide new information useful to the genetic characterization of this pathology. The PHOX2B gene silent mutations can lead to structural and functional modification of their product providing to a group of children with Class III malocclusion similar features to those of CCHS (sleep apnea episodes and craniofacial malformations).
Subject(s)
Genetic Predisposition to Disease/genetics , Homeodomain Proteins/genetics , Malocclusion, Angle Class II/genetics , Sleep Apnea, Obstructive/genetics , Transcription Factors/genetics , Adolescent , Child , DNA Mutational Analysis , Female , Humans , Male , Malocclusion, Angle Class II/diagnosis , Risk Factors , Sleep Apnea, Central/diagnosis , Sleep Apnea, Central/genetics , Sleep Apnea, Obstructive/diagnosisABSTRACT
The success of orthognathic surgery depends upon the anatomical details of the patient, the direction and extent of the necessary displacement, the experience of the surgical and orthodontic team, and the precision of presurgical orthodontic planning. The authors describe an experimental protocol to optimize presurgical orthodontic planning by the study of linear and rotational discrepancies of skeletal structures. Rotational changes of the skeletal structures can result in an overestimation or underestimation of linear discrepancies. Moreover, teeth can interfere with rotational movements, complicating presurgical planning.The study sample was a group of 20 adult patients, 7 males and 13 females. The inclusion criterion was adult patients who required correction of skeletal asymmetric class II or III malocclusion by osteotomy. Movements in the horizontal, frontal, and midsagittal planes can be simulated and measured through model surgery after diagnostic wax-up of the orthodontic treatment objective. Orthodontic presurgical preparation can be verified through the use of an occlusal splint, which represents a reliable guide during orthodontic preparation. The presurgical orthodontic phase can be obtained in less time and with more accuracy using this treatment planning method and indirect bonding of the orthodontic appliances.
Subject(s)
Malocclusion, Angle Class III/surgery , Malocclusion, Angle Class II/surgery , Models, Dental , Orthodontics, Corrective , Patient Care Planning , Adult , Algorithms , Cephalometry , Female , Humans , Imaging, Three-Dimensional , Male , OsteotomyABSTRACT
The aim of this study is to show the importance of Cone Beam Computerized Tomography to volumetrically quantify TMJ damage in patients with JIA, measuring condylar and mandibular real volumes. 34 children with temporomandibular involvement by Juvenile Idiopathic Arthritis were observed by Cone Beam Computerized Tomography. 4 were excluded because of several imaging noises. The mandible was isolated from others craniofacial structures; the whole mandibular volume and its components' volumes (condyle, ramus, hemibody, hemisymphysis on right side and on left side) has been calculated by a 3D volume rendering technique. The results show a highly significant statistical difference between affected side volumetric values versus normal side volumetric values above all on condyle region (P < 0.01), while they don't show any statistical differences between right side versus left side. The Cone Beam Computerized Tomography represents a huge improvement in understanding of the condyle and mandibular morphological changes, even in the early stages of the Juvenile Idiopathic Arthritis. The JIA can lead in children to temporomandibular joint damage with facial development and growth alterations.
Subject(s)
Arthritis, Juvenile/pathology , Cone-Beam Computed Tomography , Mandibular Condyle/pathology , Temporomandibular Joint Disorders/pathology , Temporomandibular Joint/pathology , Adolescent , Arthritis, Juvenile/diagnostic imaging , Child , Child, Preschool , Female , Humans , Imaging, Three-Dimensional , Male , Mandibular Condyle/diagnostic imaging , Sex Factors , Temporomandibular Joint/diagnostic imaging , Temporomandibular Joint Disorders/diagnostic imagingABSTRACT
Teflon is an anti-adherent and aesthetic material. The aim of this study was to evaluate, in vitro, the influence of Teflon coating on the resistance to sliding (RS) of orthodontic archwires. For this purpose, Teflon-coated archwires were examined using frictional resistance tests by means of a universal testing machine and compared with conventional uncoated wires. Twelve types of archwires with round and rectangular sections (0.014, 0.018, and 0.018 × 0.025 inches) and of different materials (stainless steel and nickel-titanium) were tested with two passive self-ligating brackets (SmartClip™ and Opal(®)) and one active self-ligating bracket (Quick(®)). Each archwire-bracket combination was tested 10 times under 8 simulated clinical scenarios. Statistical comparisons were conducted between the uncoated and Teflon-coated archwires using Wilcoxon and Mann-Whitney tests, and linear regression analysis. For all bracket-archwire combinations, Teflon-coated archwires resulted lower friction than the corresponding uncoated archwires (P < 0.01). The results showed that Teflon coating has the potential to reduce RS of orthodontic archwires.
Subject(s)
Friction , Orthodontic Appliance Design/instrumentation , Orthodontic Wires , Polytetrafluoroethylene/chemistry , Humans , Linear Models , Materials Testing , Nickel , Orthodontic Brackets , Stainless Steel , Statistics, Nonparametric , Surface Properties , TitaniumABSTRACT
SARS-CoV-2, the etiological agent of COVID-19, caused a pandemic in 2020, which is only recently slowing down. The symptoms of COVID-19 range from cough to fever and pneumonia and may persist beyond the active state of the infection, in a condition called post-COVID syndrome. The aim of this paper is to review the relationship between COVID-19 and nutrition and to discuss to most up-to-date dietary supplements proposed for COVID-19 treatment and prevention. Nutrition and nutritional dysregulations, such as obesity and malnutrition, are prominent risk factors for severe COVID-19. These factors exert anti-inflammatory and proinflammatory effects on the immune system, thus exacerbating or reducing the immunological response against the virus. As for the nutritional habits, the Western diet induces a chronic inflammatory state, whereas the Mediterranean diet exerts anti-inflammatory effects and has been proposed for ameliorating COVID-19 evolution and symptoms. Several vaccines have been researched and commercialized for COVID-19 prevention, whereas several drugs, although clinically tested, have not shown promising effects. To compensate for the lack of treatment, several supplements have been recommended for preventing or ameliorating COVID-19 symptoms. Thus, it is critical to review the dietary supplements proposed for COVID-19 treatment. Supplements containing α-cyclodextrin and hydroxytyrosol exhibited promising effects in several clinical trials and reduced the severity of the outcomes and the duration of the infection. Moreover, a supplement containing hydroxytyrosol, acetyl L-carnitine, and vitamins B, C, and D improved the symptoms of patients with post-COVID syndrome.
Subject(s)
COVID-19 , Humans , SARS-CoV-2 , COVID-19 Drug Treatment , Dietary Supplements , Anti-Inflammatory Agents/therapeutic useABSTRACT
A clinical research requires a systematic approach with diligent planning, execution and sampling in order to obtain reliable and validated results, as well as an understanding of each research methodology is essential for researchers. Indeed, selecting an inappropriate study type, an error that cannot be corrected after the beginning of a study, results in flawed methodology. The results of clinical research studies enhance the repertoire of knowledge regarding a disease pathogenicity, an existing or newly discovered medication, surgical or diagnostic procedure or medical device. Medical research can be divided into primary and secondary research, where primary research involves conducting studies and collecting raw data, which is then analysed and evaluated in secondary research. The successful deployment of clinical research methodology depends upon several factors. These include the type of study, the objectives, the population, study design, methodology/techniques and the sampling and statistical procedures used. Among the different types of clinical studies, we can recognize descriptive or analytical studies, which can be further categorized in observational and experimental. Finally, also pre-clinical studies are of outmost importance, representing the steppingstone of clinical trials. It is therefore important to understand the types of method for clinical research. Thus, this review focused on various aspects of the methodology and describes the crucial steps of the conceptual and executive stages.
Subject(s)
Research Design , HumansABSTRACT
Animal experimentation is widely used around the world for the identification of the root causes of various diseases in humans and animals and for exploring treatment options. Among the several animal species, rats, mice and purpose-bred birds comprise almost 90% of the animals that are used for research purpose. However, growing awareness of the sentience of animals and their experience of pain and suffering has led to strong opposition to animal research among many scientists and the general public. In addition, the usefulness of extrapolating animal data to humans has been questioned. This has led to Ethical Committees' adoption of the 'four Rs' principles (Reduction, Refinement, Replacement and Responsibility) as a guide when making decisions regarding animal experimentation. Some of the essential considerations for humane animal experimentation are presented in this review along with the requirement for investigator training. Due to the ethical issues surrounding the use of animals in experimentation, their use is declining in those research areas where alternative in vitro or in silico methods are available. However, so far it has not been possible to dispense with experimental animals completely and further research is needed to provide a road map to robust alternatives before their use can be fully discontinued.
Subject(s)
Animal Experimentation , Humans , Rats , Mice , Animals , Research DesignABSTRACT
The aim of this retrospective study was to cephalometrically evaluate and compare the skeletal and dental effects of a transverse sagittal maxillary expander (TSME) and a Hyrax-type expander (RME) in children with maxillary hypoplasia. Fifty subjects (26 males and 24 females), aged from 6 to 15 years, with a maxillary crossbite caused by basal apical narrowness, were divided into two equal groups. Twenty-five were treated with a TSME and the other 25 with a RME. For each patient, a lateral cephalogram was obtained before treatment (T0) and at the end of the retention period (T1). Changes in the two groups during the observation period were calculated, compared, and statistically analysed with a paired samples t -test. In the TSME group, SNP-A, I SN, and I FH and in the RME group SN-SNP.SNA, N-Me, and U6.PP displayed a statistically significant increase (P < 0.05). The increase in SNP-A, I SN, and I FH in the TSME group was significantly greater following treatment than in the RME group. The results support the use of the TSME to produce skeletal changes and dentoalveolar modification and to correct maxillary hypoplasia. It was also demonstrated that in patients with an anterior open bite, the use of the TSME is not contraindicated as the anterior vertical dimension did not increase significantly.
Subject(s)
Cephalometry/methods , Orthodontic Appliance Design , Palatal Expansion Technique/instrumentation , Adolescent , Child , Dental Arch/pathology , Female , Follow-Up Studies , Humans , Male , Malocclusion/pathology , Malocclusion/therapy , Malocclusion, Angle Class II/pathology , Malocclusion, Angle Class II/therapy , Malocclusion, Angle Class III/pathology , Malocclusion, Angle Class III/therapy , Mandible/pathology , Maxilla/abnormalities , Maxilla/pathology , Nasal Bone/pathology , Open Bite/pathology , Open Bite/therapy , Orthodontic Retainers , Palate/pathology , Retrospective Studies , Rotation , Sella Turcica/pathology , Treatment Outcome , Vertical DimensionABSTRACT
BACKGROUND: Malignant Pleural Mesothelioma (MPM) is an aggressive tumor that has a significant incidence related to asbestos exposure with no effective therapy and poor prognosis. The role of mesenchymal stromal cells (MSCs) in cancer is controversial due to their opposite effects on tumor growth and in particular, only a few data are reported on MSCs and MPM. METHODS: We investigated the in vitro efficacy of adipose tissue-derived MSCs, their lysates and secretome against different MPM cell lines. After large-scale production of MSCs in a bioreactor, their efficacy was also evaluated on a human MPM xenograft in mice. RESULTS: MSCs, their lysate and secretome inhibited MPM cell proliferation in vitro with S or G0/G1 arrest of the cell cycle, respectively. MSC lysate induced cell death by apoptosis. The efficacy of MSC was confirmed in vivo by a significant inhibition of tumor growth, similar to that produced by systemic administration of paclitaxel. Interestingly, no tumor progression was observed after the last MSC treatment, while tumors started to grow again after stopping chemotherapeutic treatment. CONCLUSIONS: These data demonstrated for the first time that MSCs, both through paracrine and cell-to-cell interaction mechanisms, induced a significant inhibition of human mesothelioma growth. Since the prognosis for MPM patients is poor and the options of care are limited to chemotherapy, MSCs could provide a potential new therapeutic approach for this malignancy.