Aggregation and Gelation Behavior of Stereocomplexed Four-Arm PLA-PEG Copolymers Containing Neutral or Cationic Linkers.

Poly(lactide) (PLA) and poly(ethylene glycol) (PEG)-based hydrogels were prepared by mixing phosphate buffer saline (PBS, pH 7.4) solutions of four-arm (PEG-PLA)2-R-(PLA-PEG)2 enantiomerically pure copolymers having the opposite chirality of the poly(lactide) blocks. Dynamic Light Scattering, rheology measurements, and fluorescence spectroscopy suggested that, depending on the nature of the linker R, the gelation process followed rather different mechanisms. In all cases, mixing of equimolar amounts of the enantiomeric copolymers led to micellar aggregates with a stereocomplexed PLA core and a hydrophilic PEG corona. Yet, when R was an aliphatic heptamethylene unit, temperature-dependent reversible gelation was mainly induced by entanglements of PEG chains at concentrations higher than 5 wt.%. When R was a linker containing cationic amine groups, thermo-irreversible hydrogels were promptly generated at concentrations higher than 20 wt.%. In the latter case, stereocomplexation of the PLA blocks randomly distributed in micellar aggregates is proposed as the major determinant of the gelation process.

Recent Advances of Polycationic siRNA Vectors for Cancer Therapy.

Small interfering RNAs (siRNAs) have recently emerged as a new class of biopharmaceuticals for the treatment of various diseases, including genetic diseases, viral infections, heritable disorders, and most prominently, cancer. However, clinical applications of siRNA-based therapeutics through intravenous administration have been limited due to their rapid degradation and renal clearance, poor cellular uptake, low cytoplasmic release by escaping endocytic uptake, and off-target effects. The success of siRNA-based therapeutics depends upon the design and creation of efficient delivery vectors that should be able to protect siRNA from in vivo degradation and specifically deliver siRNA to cytosol of target cells. Over the past decade, myriad types of carrier systems composed of cationic polymers have been designed for delivery of siRNA to tumor cells. In this review, we overview recent advances in siRNA delivery by using these promising nonviral carrier systems in diverse approaches to overcome the delivery hindrances and provide valuable understanding to direct the future design of siRNA delivery carriers.

Microstructured Photo-Crosslinked Poly(Trimethylene Carbonate) for Use in Soft Lithography Applications: A Biodegradable Alternative for Poly(Dimethylsiloxane).

Photo-crosslinkable poly(trimethylene carbonate) (PTMC) macromers were used to fabricate microstructured surfaces. Microstructured PTMC surfaces were obtained by hot embossing the macromer against structured silicon masters and subsequent photo-crosslinking, resulting in network formation. The microstructures of the master could be precisely replicated, limiting the shrinkage. Microstructured PTMC was investigated for use in two different applications: as stamping material to transfer a model protein to another surface and as structured substrate for cell culture. Using the flexible and elastic materials as stamps, bovine serum albumin labelled with fluorescein isothiocyanate was patterned on glass surfaces. In cell culture experiments, the behavior of human mesenchymal stem cells on nonstructured and microstructured PTMC surfaces was investigated. The cells strongly adhered to the PTMC surfaces and proliferated well. Compared to poly(dimethylsiloxane) (PDMS), which is commonly used in soft lithography, the PTMC networks offer significant advantages. They show better compatibility with cells, are biodegradable, and have much better mechanical properties. Both materials are transparent, flexible, and elastic at room temperature, but the tear resistance of PTMC networks is much higher than that of PDMS. Thus, PTMC might be an alternative material to PDMS in the fields of biology, medicine, and tissue engineering, in which microfabricated devices are increasingly being applied.

Enzymatically and reductively degradable α-amino acid-based poly(ester amide)s: synthesis, cell compatibility, and intracellular anticancer drug delivery.

A novel and versatile family of enzymatically and reductively degradable α-amino acid-based poly(ester amide)s (SS-PEAs) were developed from solution polycondensation of disulfide-containing di-p-toluenesulfonic acid salts of bis-l-phenylalanine diesters (SS-Phe-2TsOH) with di-p-nitrophenyl adipate (NA) in N,N-dimethylformamide (DMF). SS-PEAs with Mn ranging from 16.6 to 23.6 kg/mol were obtained, depending on NA/SS-Phe-2TsOH molar ratios. The chemical structures of SS-PEAs were confirmed by (1)H NMR and FTIR spectra. Thermal analyses showed that the obtained SS-PEAs were amorphous with a glass transition temperature (Tg) in the range of 35.2-39.5 °C. The in vitro degradation studies of SS-PEA films revealed that SS-PEAs underwent surface erosion in the presence of 0.1 mg/mL α-chymotrypsin and bulk degradation under a reductive environment containing 10 mM dithiothreitol (DTT). The preliminary cell culture studies displayed that SS-PEA films could well support adhesion and proliferation of L929 fibroblast cells, indicating that SS-PEAs have excellent cell compatibility. The nanoparticles prepared from SS-PEA with PVA as a surfactant had an average size of 167 nm in phosphate buffer (PB, 10 mM, pH 7.4). SS-PEA nanoparticles while stable under physiological environment undergo rapid disintegration under an enzymatic or reductive condition. The in vitro drug release studies showed that DOX release was accelerated in the presence of 0.1 mg/mL α-chymotrypsin or 10 mM DTT. Confocal microscopy observation displayed that SS-PEA nanoparticles effectively transported DOX into both drug-sensitive and -resistant MCF-7 cells. MTT assays revealed that DOX-loaded SS-PEA nanoparticles had a high antitumor activity approaching that of free DOX in drug-sensitive MCF-7 cells, while more than 10 times higher than free DOX in drug-resistant MCF-7/ADR cells. These enzymatically and reductively degradable α-amino acid-based poly(ester amide)s have provided an appealing platform for biomedical technology in particular controlled drug delivery applications.

Glyco-nanoparticles with sheddable saccharide shells: a unique and potent platform for hepatoma-targeting delivery of anticancer drugs.

Reduction-sensitive shell-sheddable glyco-nanoparticles were designed and developed based on poly(ε-caprolactone)-graft-SS-lactobionic acid (PCL-g-SS-LBA) copolymer for efficient hepatoma-targeting delivery of doxorubicin (DOX). PCL-g-SS-LBA was prepared by ring-opening copolymerization of ε-caprolactone and pyridyl disulfide carbonate followed by postpolymerization modification with thiolated lactobionic acid (LBA-SH) via thiol-disulfide exchange reaction. The dynamic light scattering (DLS) and transmission electron microscopy (TEM) showed that PCL-g-SS-LBA was self-assembled into monodisperse nanoparticles (SS-GNs) with a mean diameter of about 80 nm. SS-GNs while remaining stable under physiological conditions (37 °C, pH 7.4) were prone to rapid shell-shedding and aggregation in the presence of 10 mM dithiothreitol (DTT). DOX was loaded into SS-GNs with a decent loading content of 12.0 wt %. Notably, in vitro release studies revealed that about 80.3% DOX was released from DOX-loaded SS-GNs in 24 h under a reductive condition while low drug release (<21%) was observed for DOX-loaded PCL-g-LBA nanoparticles (reduction-insensitive control) under otherwise the same condition and for DOX-loaded SS-GNs under a nonreductive condition. The flow cytometry and confocal microscopy observations indicated that SS-GNs were efficiently taken up by asialoglycoprotein receptor (ASGP-R)-overexpressing HepG2 cells likely via a receptor-mediated endocytosis mechanism and DOX was released into the nuclei of cells following 4 h incubation. MTT assays showed that DOX-loaded SS-GNs exhibited a high antitumor activity toward HepG2 cells, which was comparable to free DOX and about 18-fold higher than their reduction-insensitive counterparts, while blank SS-GNs were nontoxic up to a tested concentration of 1.0 mg/mL. These shell-sheddable glyco-nanoparticles are promising for hepatoma-targeting chemotherapy.

In situ forming reduction-sensitive degradable nanogels for facile loading and triggered intracellular release of proteins.

In situ forming reduction-sensitive degradable nanogels were designed and developed based on poly(ethylene glycol)-b-poly(2-(hydroxyethyl) methacrylate-co-acryloyl carbonate) (PEG-P(HEMA-co-AC)) block copolymers for efficient loading as well as triggered intracellular release of proteins. PEG-P(HEMA-co-AC) copolymers were prepared with controlled Mn of 9.1, 9.5, and 9.9 kg/mol and varying numbers of AC units per molecule of 7, 9 and 11, respectively (denoted as copolymer 1, 2, and 3) by reversible addition-fragmentation chain transfer copolymerization. These copolymers were freely soluble in phosphate buffer but formed disulfide-cross-linked nanogels with defined sizes ranging from 72.5 to 124.1 nm in the presence of cystamine via ring-opening reaction with cyclic carbonate groups. The sizes of nanogels decreased with increasing AC units as a result of increased cross-linking density. Dynamic light scattering studies showed that these nanogels though stable at physiological conditions were rapidly dissociated in response to 10 mM dithiothreitol (DTT). Interestingly, FITC-labeled cytochrome C (FITC-CC) could be readily loaded into nanogels with remarkable loading efficiencies (up to 98.2%) and loading contents (up to 48.2 wt.%). The in vitro release studies showed that release of FITC-CC was minimal under physiological conditions but significantly enhanced under reductive conditions in the presence of 10 mM DTT with about 96.8% of FITC-CC released in 22 h from nanogel 1. In contrast, protein release from 1,4-butanediamine cross-linked nanogels (reduction-insensitive control) remained low under otherwise the same conditions. MTT assays showed that these nanogels were nontoxic to HeLa cells up to a tested concentration of 2 mg/mL. Confocal microscopy results showed that nanogel 1 delivered and released FITC-CC into the perinuclei region of HeLa cells following 8 h incubation. CC-loaded reductively degradable nanogels demonstrated apparently better apoptotic activity than free CC as well as reduction-insensitive controls. These in situ forming, surfactant and oil-free, and reduction-sensitive degradable nanogels are highly promising for targeted protein therapy.

Controlling the kinetic chain length of the crosslinks in photo-polymerized biodegradable networks.

Biodegradable polymer networks were prepared by photo-initiated radical polymerization of methacrylate functionalized poly(D,L-lactide) oligomers. The kinetic chains formed in this radical polymerization are the multifunctional crosslinks of the networks. These chains are carbon-carbon chains that remain after degradation. If their molecular weight is too high these poly(methacrylic acid) chains can not be excreted by the kidneys. The effect of the photo-initiator concentration and the addition of 2-mercaptoethanol as a chain transfer agent on the molecular weight of the kinetic chains was investigated. It was found that both increasing the initiator concentration and adding 2-mercaptoethanol decrease the kinetic chain length. However, the effect of adding 2-mercaptoethanol was much larger. Some network properties such as the glass transition temperature and the swelling ratio in acetone are affected when the kinetic chain length is decreased.

α-Amino acid containing degradable polymers as functional biomaterials: rational design, synthetic pathway, and biomedical applications.

Currently, biomedical engineering is rapidly expanding, especially in the areas of drug delivery, gene transfer, tissue engineering, and regenerative medicine. A prerequisite for further development is the design and synthesis of novel multifunctional biomaterials that are biocompatible and biologically active, are biodegradable with a controlled degradation rate, and have tunable mechanical properties. In the past decades, different types of α-amino acid-containing degradable polymers have been actively developed with the aim to obtain biomimicking functional biomaterials. The use of α-amino acids as building units for degradable polymers may offer several advantages: (i) imparting chemical functionality, such as hydroxyl, amine, carboxyl, and thiol groups, which not only results in improved hydrophilicity and possible interactions with proteins and genes, but also facilitates further modification with bioactive molecules (e.g., drugs or biological cues); (ii) possibly improving materials biological properties, including cell-materials interactions (e.g., cell adhesion, migration) and degradability; (iii) enhancing thermal and mechanical properties; and (iv) providing metabolizable building units/blocks. In this paper, recent developments in the field of α-amino acid-containing degradable polymers are reviewed. First, synthetic approaches to prepare α-amino acid-containing degradable polymers will be discussed. Subsequently, the biomedical applications of these polymers in areas such as drug delivery, gene delivery and tissue engineering will be reviewed. Finally, the future perspectives of α-amino acid-containing degradable polymers will be evaluated.

Self-assembly and photo-cross-linking of eight-armed PEG-PTMC star block copolymers.

Eight-armed poly(ethylene glycol)-poly(trimethylene carbonate) star block copolymers (PEG-(PTMC)(8)) linked by a carbamate group between the PEG core and the PTMC blocks were synthesized by the metal-free, HCl-catalyzed ring-opening polymerization of trimethylene carbonate using an amine-terminated eight-armed star PEG in dichloromethane. Although dye solubilization experiments, nuclear magnetic resonance spectroscopy, and dynamic light scattering clearly indicated the presence of aggregates in aqueous dispersions of the copolymers, no physical gelation was observed up to high concentrations. PEG-(PTMC(9))(8) was end-group-functionalized using acryloyl chloride and photopolymerized in the presence of Irgacure 2959. When dilute aqueous dispersions of PEG-(PTMC(9))(8)-Acr were UV irradiated, chemically cross-linked PEG-PTMC nanoparticles were obtained, whereas irradiation of more concentrated PEG-(PTMC(9))(8)-Acr dispersions resulted in the formation of photo-cross-linked hydrogels. Their good mechanical properties and high stability against hydrolytic degradation make photo-cross-linked PEG-PTMC hydrogels interesting for biomedical applications such as matrices for tissue engineering and controlled drug delivery systems.

Multi-functional polymeric micelles for chemotherapy-based combined cancer therapy.

Currently, the therapeutic performance of traditional mono-chemotherapy on cancers remains unsatisfactory because of the tumor heterogeneity and multidrug resistance. In light of intricate tumor structures and distinct tumor microenvironments (TMEs), combinational therapeutic strategies with multiple anticancer drugs from different mechanisms can synergistically optimize the outcomes and concomitantly minimize the adverse effects during the therapy process. Extensive research on polymeric micelles (PMs) for biomedical applications has revealed the growing importance of nanomedicines for cancer therapy in the recent decade. Starting from traditional simple delivery systems, PMs have been extended to multi-faceted therapeutic strategies. Here we review and summarize the most recent advances in combinational therapy based on multifunctional PMs including a combination of multiple anticancer drugs, chemo-gene therapy, chemo-phototherapy and chemo-immunotherapy. The design approaches, action mechanisms and therapeutic applications of these nanodrugs are summarized. In addition, we highlight the opportunities and potential challenges associated with this promising field, which will provide new guidelines for advanced combinational cancer chemotherapy.

A microfluidic wound-healing assay for quantifying endothelial cell migration.

Endothelial migration is an important process in the formation of blood vessels and the repair of damaged tissue. To study this process in the laboratory, versatile and reliable migration assays are essential. The purpose of this study was to investigate whether the microfluidic version of the conventional wound-healing assay is a useful research tool for vascular science. Endothelial cells were seeded in a 500-mum-wide microfluidic channel. After overnight incubation, cells had formed a viable and confluent monolayer. Then, a wound was generated in this monolayer by flushing the channel with three parallel fluid streams, of which the middle one contained the protease trypsin. By analyzing the closing of the wound over time, endothelial cell migration could be measured. Although the migration rate was two times lower in the microfluidic assay than in the conventional assay, an identical 1.5-times increase in migration rate was found in both assays when vascular endothelial growth factor (VEGF(165)) was added. In the microfluidic wound-healing assay, a stable gradient of VEGF(165) could be generated at the wound edge. This led to a two-times increase in migration rate compared with the untreated control. Finally, when a shear stress of 1.3 Pa was applied to the wound, the migration rate increased 1.8 times. In conclusion, the microfluidic assay is a solid alternative for the conventional wound-healing assay when endothelial cell migration is measured. Moreover, it offers unique advantages, such as gradient generation and application of shear stress.

Reducible poly(amido ethylenimine)-based gene delivery system for improved nucleus trafficking of plasmid DNA.

In a nonviral gene delivery system, localization of a plasmid DNA in the nucleus is a prerequisite for expression of a desired therapeutic protein encoded in the plasmid DNA. In this study, a reducible polymer-based gene delivery system for improved intracellular trafficking and nuclear translocation of plasmid DNA is introduced. The system is consisted of two components, a plasmid DNA having repeated binding sequence for a karyophilic protein, NFkappaB, and a reducible polymer. A reducible poly(amido ethylenimine), poly(TETA-CBA), was synthesized by a Michael-type addition polymerization between cystamine bisacrylamide and triethyl tetramine. The polymer forming tight complexes with plasmid DNA could be degraded in the reductive cytosol to release the plasmid DNA. The triggered release mechanism in the cytosol could facilitate the interaction between cytosolic NFkappaB and the plasmid DNA having repeated NFkappaB biding motif. Upon activation of NFkappaB by interleukin-1beta (IL-1beta), most of the plasmid distributed in the cytoplasm was localized within the nucleus, resulting in significantly higher gene transfection efficiency than controls with nondegradable PEI. The current study suggests an alternative way of improving transfection efficiency by taking advantage of endogenous transport machinery for intracellular trafficking and nuclear translocation of a plasmid DNA.

Mixtures of poly(triethylenetetramine/cystamine bisacrylamide) and poly(triethylenetetramine/cystamine bisacrylamide)-g-poly(ethylene glycol) for improved gene delivery.

Branched disulfide-containing poly(amido ethyleneimines) (SS-PAEIs) are biodegradable polymeric gene carrier analogues of the well-studied, nondegradable, and often toxic branched polyethylenimines (bPEIs), but with distinct advantages for cellular transgene delivery. Clinical success of polycationic gene carriers is hampered by obscure design and formulation requirements. This present work reports synthetic and formulation properties for a graft copolymer of poly(ethylene glycol) (PEG) and a branched SS-PAEI, poly(triethylentetramine/cystaminebisacrylamide) (p(TETA/CBA)). Several laboratories have previously demonstrated the advantages of PEG conjugation to gene carriers, but have also shown that PEG conjugation may perturb plasmid DNA (pDNA) condensation, thereby interfering with nanoparticle formation. With this foundation, our studies sought to mix various amounts of p(TETA/CBA) and p(TETA/CBA)-g-PEG2k to alter the relative amount of PEG in each formulation used for polyplex formation. The influence of different PEG/polycation amounts in the formulations on polymer/nucleic acid nanoparticle (polyplex) size, surface charge, morphology, serum stability and transgene delivery was studied. Polyplex formulations were prepared using p(TETA/CBA)-g-PEG2k, p(TETA/CBA), and mixtures of the two species at 10/90 and 50/50 volumetric mixture ratios (wt/wt %), respectively. As expected, increasing the amount of PEG in the formulation adversely affects polyplex formation. However, optimal polymer mixtures could be identified using this facile approach to further clarify design and formulation requirements necessary to understand and optimize carrier stability and biological activity. This work demonstrates the feasibility to easily overcome typical problems observed when polycations are modified and thus avoids the need to synthesize multiple copolymers to identify optimal gene carrier candidates. This approach may be applied to other polycation-PEG preparations to alter polyplex characteristics for optimal stability and biological activity.

Self-aggregation of gel forming PEG-PLA star block copolymers in water.

The aggregation behavior and dynamics of poly(ethylene glycol) (PEG) and poly(lactide) (PLA) chains in a homologous series of eight-armed PEG-PLA star block copolymers ((PEG(65)-NHCO-PLA(n))(8) with n = 11, 13, and 15) in water at different concentrations and temperatures were studied by means of (1)H and (13)C NMR spectroscopy and (1)H longitudinal relaxation time analysis. The state of water in these systems was also investigated through the combined use of (1)H and (2)H longitudinal relaxation time measurement. On the basis of the NMR experimental findings and of dynamic light scattering measurements, (PEG(65)-NHCO-PLA(n))(8) in water can be described as self-aggregated systems with quite rigid hydrophobic domains made of PLA chains and aqueous domains where both PEG chains and water molecules undergo fast dynamics. A smaller number of rigid domains was found for (PEG(65)-NHCO-PLA(11))(8) with respect to the homologous copolymers with longer PLA chains. At low concentrations, the PLA domains are mainly formed by chains belonging to the same molecule, thus giving rise to unimolecular micelles. At intermediate concentrations, that is, above the critical association concentration (CAC) but below the critical gel concentration (CGC), nanogels are formed by interconnection of several PLA domains through shared unimers. Above the CGC, the network is extended to the entire system, giving rise to macroscopic gels. In all cases, a fraction of PLA chains remains quite mobile and exposed to water due to topological constraints of the star architecture.

Biodegradable elastomeric networks: highly efficient cross-linking of poly(trimethylene carbonate) by gamma irradiation in the presence of pentaerythritol triacrylate.

Biodegradable elastomeric poly(trimethylene carbonate) (PTMC) networks were efficiently formed by gamma irradiating the linear polymer in the presence of pentaerythritol triacrylate (PETA). The properties of networks formed upon irradiation of PTMC films containing (0, 1, 5 wt %) PETA as a cross-linking aid were evaluated. The gel contents and network densities increased with increasing PETA contents, irradiation dose, and initial polymer molecular weights. At a dose of 25 kGy, networks with gel fractions up to 0.96 could be obtained. The networks were noncytotoxic, had elastic moduli below 10.7 MPa and high tensile strengths of up to 37.7 MPa. The incorporation of PETA also improved the resistance to creep and to tear propagation significantly, resulting in permanent set values that were as low as 0.9% strain and tear strengths up to 9.3 ± 2.0 N/mm. Furthermore, the enzymatic erosion rates of the networks could be decreased from 12.0 ± 2.9 to 3.0 ± 1.6 µm/day. These biodegradable elastomeric PTMC networks may be utilized in a broad range of medical applications.

Influence of amide versus ester linkages on the properties of eight-armed PEG-PLA star block copolymer hydrogels.

Water-soluble eight-armed poly(ethylene glycol)-poly(l-lactide) star block copolymers linked by an amide or ester group between the PEG core and the PLA blocks (PEG-(NHCO)-(PLA)(8) and PEG-(OCO)-(PLA)(8)) were synthesized by the stannous octoate catalyzed ring-opening polymerization of l-lactide using an amine- or hydroxyl-terminated eight-armed star PEG. At concentrations above the critical gel concentration, thermosensitive hydrogels were obtained, showing a reversible single gel-to-sol transition. At similar composition PEG-(NHCO)-(PLA)(8) hydrogels were formed at significantly lower polymer concentrations and had higher storage moduli. Whereas the hydrolytic degradation/dissolution of the PEG-(OCO)-(PLA)(8) takes place by preferential hydrolysis of the ester bond between the PEG and PLA block, the PEG-(NHCO)-(PLA)(8) hydrogels degrade through hydrolysis of ester bonds in the PLA main chain. Because of their relatively good mechanical properties and slow degradation in vitro, PEG-(NHCO)-(PLA)(8) hydrogels are interesting materials for biomedical applications such as controlled drug delivery systems and matrices for tissue engineering.

Validation of human periodontal ligament-derived cells as a reliable source for cytotherapeutic use.

AIM: Periodontal ligament (PDL) is a reliable cell source for periodontal regeneration. In this study, an optimal protocol for the extraction, expansion, and characterization of human PDL (hPDL) cells was examined for clinical trials. MATERIALS AND METHODS: hPDL tissues were obtained from 41 surgically extracted teeth and digested with enzymes. Human adipose-derived stem cells (hADSCs), bone marrow-derived mesenchymal stem cells (hBMMSCs), and gingival fibroblasts (hGFs) were used for comparison. For each sample, the proliferative capacity, colony-forming ability, alkaline phosphatase activity, differentiation ability, the cell surface antigens, gene expression, and regenerative potential were examined. RESULTS: hPDL cells were more successfully extracted with collagenase/dispase [29/30 (96.7%)] than with trypsin/EDTA [8/11 (72.7%)], and exhibited osteogenic potential both in vitro and in vivo. The proliferation of hPDL cells was rapid at a low cell density. hPDL cells frequently differentiated into cementoblastic/osteoblastic lineage (∼60%). In contrast, their adipogenic and chondrogenic potentials were lower than those of hADSCs and hBMMSCs. Some genes (NCAM1, S100A4, and periostin) were preferentially expressed in hPDL cells compared with those of hBMMSCs and hGFs. Immunohistochemical studies revealed the expressions of S100A4 and periostin in hPDL tissue. CONCLUSION: A protocol for the successful cultivation and validation of hPDL cells is proposed for clinical settings.

Dual bio-responsive gene delivery via reducible poly(amido amine) and survivin-inducible plasmid DNA.

A bioreducible poly(amido amine) (SS-PAA) gene carrier, known as poly (amido-butanol) (pABOL), was used to transfect a variety of cancer and non-cancer cell lines. To obtain cancer-specific transgene expression for therapeutic efficiency in cancer treatment, we constructed survivin-inducible plasmid DNA expressing the soluble VEGF receptor, sFlt-1, downstream of the survivin promoter (pSUR-sFlt-1). Cancer-specific expression of sFlt-1 was observed in the mouse renal carcinoma (RENCA) cell line. pABOL enhanced the efficiency of gene delivery compared to traditional carriers used in the past. Thus, a dual bio-responsive gene delivery system was developed by using bioreducible p(ABOL) for enhanced intracellular gene delivery and survivin-inducible gene expression system (pSUR-sFlt-1 or pSUR-Luc reporter gene) that demonstrates increased gene expression in cancer that has advantages over current gene delivery systems.

Chiral salan aluminium ethyl complexes and their application in lactide polymerization.

Synthetic routes to aluminium ethyl complexes supported by chiral tetradentate phenoxyamine (salan-type) ligands [Al(OC(6)H(2)(R-6-R-4)CH(2))(2){CH(3)N(C(6)H(10))NCH(3)}-C(2)H(5)] (4, 7: R=H; 5, 8: R=Cl; 6, 9: R=CH(3)) are reported. Enantiomerically pure salan ligands 1-3 with (R,R) configurations at their cyclohexane rings afforded the complexes 4, 5, and 6 as mixtures of two diastereoisomers (a and b). Each diastereoisomer a was, as determined by X-ray analysis, monomeric with a five-coordinated aluminium central core in the solid state, adopting a cis-(O,O) and cis-(Me,Me) ligand geometry. From the results of variable-temperature (VT) (1)H NMR in the temperature range of 220-335 K, (1)H-(1)H NOESY at 220 K, and diffusion-ordered spectroscopy (DOSY), it is concluded that each diastereoisomer b is also monomeric with a five-coordinated aluminium central core. The geometry is intermediate between square pyramidal with a cis-(O,O), trans-(Me,Me) ligand disposition and trigonal bipyramidal with a trans-(O,O) and trans-(Me,Me) disposition. A slow exchange between these two geometries at 220 K was indicated by (1)H-(1)H NOESY NMR. In the presence of propan-2-ol as an initiator, enantiomerically pure (R,R) complexes 4-6 and their racemic mixtures 7-9 were efficient catalysts in the ring-opening polymerization of lactide (LA). Polylactide materials ranging from isotactically biased (P(m) up to 0.66) to medium heterotactic (P(r) up to 0.73) were obtained from rac-lactide, and syndiotactically biased polylactide (P(r) up to 0.70) from meso-lactide. Kinetic studies revealed that the polymerization of (S,S)-LA in the presence of 4/propan-2-ol had a much higher polymerization rate than (R,R)-LA polymerization (k(SS)/k(RR)=10.1).

Stimuli-responsive polymersomes for programmed drug delivery.

In the past decade, polymersomes (also referred to as polymeric vesicles) have attracted rapidly growing interest based on their intriguing aggregation phenomena, cell and virus-mimicking dimensions and functions, as well as tremendous potential applications in medicine, pharmacy, and biotechnology. Unlike liposomes self-assembled from low molecular weight lipids, polymersomes are in general prepared from macromolecular amphiphiles of various architectures including amphiphilic diblock, triblock, graft and dendritic copolymers. Polymersomes exhibit very unique features highlighted with high stability, tunable membrane properties, versatility, and capacity of transporting hydrophilic as well as hydrophobic species such as anticancer drugs, genes, proteins, and diagnostic probes. Recently, much effort has been directed to the development of intelligent polymersomes that respond to internal or external stimuli, in particular, pH, temperature, redox potential, light, magnetic field, and ultrasound, either reversibly or nonreversibly. Stimuli-sensitive polymersomes have emerged as novel programmable delivery systems in which the release of the encapsulated contents can be readily modulated by the stimulus. The stimuli-responsive release may result in significantly enhanced therapeutic efficacy and minimized possible side effects. It is also feasible to form and disassemble polymersomes in water simply by applying an appropriate stimulus. In this article, recent advances in stimuli-sensitive polymersomes have been reviewed, and perspectives on future developments have been discussed.